Standard Texts and Text Modules

Hi,
How to include standard texts and text modules in Adobe Print Forms?
Is there any solution?
Thanks !

Hi
You can call standard text and text modules by the following options :
Create One Text Window by right clicking the option. In this general attributes tab select the 'Text Type' as 'Text Module' and it will ask for the Name of the text module.
Press f 4 help to select the text module. And enter the language also.
Thanks

Similar Messages

Standard Text and Text element

Hi Everyone,
Hope you all doing great.
What is the difference between SAP Stadard text and Text elements? When and where to use these?
I have got Terms and condition text for my quote O/P Document, Is it okay if i go with Standard text?
What is the Text ID i have to use?
Thank you
Kris

Hi
Difference between SAP Standard text and Text elements :
SAP Standard text : The standard texts which have been already created and can be created
Text Elements : They are the elements which are available in VOTXN and are assigned while configuring text determination
Regards
Srinath

What is the difference between Standard text and Text Symbols?

Hi,
1.Difference between Standard text and text symbol,?
2. Which we use Standard symbol?

Text symbol
Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
- Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
- Using a standard text symbol.
The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
Also check this link,
http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script.

Difference between Include Text and Text Modules in Smartform?

Hello Experts,
I need to know the differences between Include Text and Text Modules in the Smartform.
When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
Now i need to know the differences between Include Text and Text Module.
Thanks and Best Regards,
Suresh

Hi Suresh,
Kindly check the below link for Text Modules.
[http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
For Include Text:
[Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
Regards,
-Syed.

Selection text and text elements contents not displayed

I have a language related problem
I have 2 servers .
In first server I logged in english language and the selection text and text elements are displayed in English.
The requirement is I dont want to translate these texts it should be displayed in English only even if I log into SAP with other language.
So if I log in german I see the texts in English in the first server.
But this is not the case with second.
If I log in with English I see the english texts but if I do in german I am not able to see this english text with proper contents .
Can anybody let me know if there are any settings to be done ? As its working fine in first server but not in second .
Edited by: Jalpa Shukla on Oct 22, 2008 11:19 AM

Hello Jalpa Shukla,
If you want to display the text in english language only better dont use Text-element
instead of using text element you hard the text in the program then you will display the text in same in English.
Try in this way, If not past the code i will give the solution

Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.

Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O

Standard Macro and Functional Module in HR -Programming.

Hi friends,
Could i know the difference between a standard macro and a function module in hr programming.
how do we have to use that and what are the different std macro's and functional modules used in HR-Programming...
Thanks in Advance..
Regards
Shiva

You will find the macros in table TRMAC .
Macros are set of pre defined instructions .
You can define your own macros in the program using 'definition' command or use standard macros.
you will find most of the HR function module starting with HR* or RH * .
You can get Macro definition / its fundamental difference with function module on web .
Hopw this is helpful

Iphone 4s-when wifi is off and I am away from my home connection can I receive and send texts and text messages? I want to keep my wifi off to limit data (email etc) to when I want to check it. Cellular is roaming"voice only" it says.Can I get texts?

When my wifi is off and I'm away from my home connection - it shows wifi off (unless I turn it on to check my email etc.) - and in the settings cellular it shows "voice only". Will I be able to receive and send texts in those settings? Or check voicemail. I had wanted to keep my email from coming in all the time and only want to check it periodically - so I turn ON my wifi when I want to check my email. But when my wifi was off away from home- I hadn't seemed to be getting my texts. So- do I need to keep wifi roaming connected when away from home to receive and send my texts in real time. (which is what I want) or am I still able to send and receive texts with my wifi off when I'm away from home. (When I'm home I am connected to my home data plan automatically through wifi and I get texts when I'm home - but I'm thinking I'm not getting texts in real time - is it because my wifi is off when I'm away from home? My cellular shows voice only when my wifi is off away from home. Am I doing it right to receive and send texts away from home? Or do I need to open up the wifi in order to receive and send text messages. I know that I would need to turn on wifi roaming - which will use data - for email checking or sending - as well as to use browsing apps and now I'm guessing to receive voice messages I may have missed? So do I need wifi on to receive texts too? Thank you - GregorySC

Hello GregorySC,
In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

Suggestions - predictive text and text entry

I don't know if this forum is intended for suggestions but here are a couple anyway.
1. Because email and sms text do not operate in landscape mode the keyboard is very small. This leads to a large number of text entry errors compared to ther devices I have used. The screen sensitivity is excellent so this is ont a problem with using a touch device. Allowing landscape data entry would go a long wawy to solving this problem - the keyboard when used with safari in landscape mode is a lot better (perhaps 10% of the missed keys). An alternative which would be better for single handed use would be to ditch the qwerty layout and have a key pad that runs to 4 or 5 rows of keys instead of 3. In most cases it is only neccesary to see a single line of text entry so there is plenty of screen re-estate to do this.
2. The predictive text feature on the iPhone is very poor. This is due to a fundamental error in its design. The current implementation assumes that the current word typed is complete but may be misspelled. To be more useful the feature needs to assume that the characters typed are correct and suggest complete words that start with the fragment available. The predictive text in Windows mobile is infinately better that that of the iPhone (and one of the few features I miss from my old phone!).
If this is the wrong place for posting these suggestion - sorry

This is a user to user forum. To submit feedback to Apple, use this form:
http://www.apple.com/feedback/iphone.html

Text and text box unavailable

Used iWeb 09 to build a web page with a template: Now the left column is unavailable for edit or selection as a text box. If I "select all", it is selected with all other elements on the page--and I can move the box--but still can't edit the text in the box. Any help appreciated

Fix: Make hyperlinks inactive!

Creating text and text frames

This question was posted in response to the following article: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6fb2a.h tml

I did try to experiment and verify this detail with Baseline grid, but no precedence seems to apply :
«If Grids In Back is selected in Grids Preferences, then frame-based baseline grids take precedence over document-based baseline grids. If Grids In Back is not selected, then document-based baseline grids take precedence over frame-based baseline grids.»
I have tried with (in all examples the text align to baseline grid have been verified)
• a text box with a custom baseline grid and a baseline grid for the document (both with different increments),
• a text box WITHOUT a custom baseline grid OVER a text box with a custom baseline grid and a baseline grid for the document (both with different increments)
In any way I could have experiment some layer taking precedence on the other.
Is there something i'm missing ?
Regards,

Reg Standard programs and function modules

Hi Could you please tell how to find the list of
1.standard programs used
2.standard tcode used
3.function module used
is there any table or function module to find the above
Thanks in advance
points will be rewarded

hi,
TADIR - Tables
TSTC - transactions
TFDIR - Function modules.
If you want to search for any table ,
Suppose if you want to search for a table which stores
Country names then just
GOTO SE11 and place the cursor on 'Database table'
press F4,
Click on 'Information system'
then one window is displayed there give short description
and search .
You will get the tables list there you can fine the table which you want.
For any other if you want to find out table which stores all the domain names then click F4 on 'DOMAIN' then search.
to search function modules GOTO SE37 there press F4 then give short description and search. Ok.
Regards,
Rajitha.

Failed to send text and text message color?

Hey Guys, well yesterday I got my Iphone 4 and activated it earlier today with a T-Mobile micro sim card and after I entered in all of my contacts , I tried to send a text to my friend but it failed and it noticed that when tried to send it the text color was green then i sent another text to a different friend and this time it was blue. My brother told it that the blue text good for iphone users while green was good for anything other than iphone. I turned off "enable 3g" and cellular data and I turned on mms messaging, "send as SMS'', and group messaging and I tried again to send the text to the green user but it failed to send again. Can Iphone users send texts to android, etc. users?

Yes, you can send texts to Android, etc. They will all be green as you say above. But text messages are at the discretion of your cellular carrier. You have to have a plan in place with them to send/receive (green) text messages.

How to scale text and text frame together by specifying measurements

Hi all,
I have a text frame that's 200mm wide (for example) and need to be able to scale it proportionally, along with the text it contains, by specifying the new width in mm (rather than as a percentage). Can anyone tell me if this is possible? I'm using InDesign CC 2014.
Many thanks
Jason

Maybe with a script, but I don't know of a way to do it in one step, the way you can scale with a percentage. If you want to do it in a few steps, this will work:
Set the position proxy to the left side of the text frame so that when you change the size, it will expand to the right
Change the size of the text frame to the size you need it to be
Snap a guide to the right edge of the text frame
Change the size of the text frame back to what it was before
Shift-Command drag the right side of the text frame until it snaps to the guide
That will get you want you want, but it's probably not the way you would prefer to do it.

Conditional text and text inserts in FM 10

A perfect scenario, I thought, for conditional text: user guides for versions A and B of the same product, where most of the content is the same for both and some specific to one or the other. Some of the variants – such as "Connecting the power supply" – are at chapter level, others at paragraph level … so I've set prepared two .book files, and two chapter files which contain a single sentence plus the condition settings: show A, hide B or show B, hide A, respectively.
Extra finesse, just sprung on me: one chapters, which exists in an A and a B version, uses a text insert for some common paragraphs and one of these paragraphs now needs to be hidden util development is completed.
Long context, then. Short problems:
selecting all the files in a .book and using File > Import formats (with only Conditional text settings selected) doesn't seem to be working
the conditional text in the insert refuses to go away, even with the relevant condition defined, and set to Hide, both in the insert and in the chapter that calls it
Final question: do I need to brush up on conditions, or is FM 10 not as reliable as it might be here?
Windows 7.0, one single FM installation of 10.0.2.419

Niels,
When you imported the text insert, what did you set for its properties behaviour, i.e. to stay as per the source or to use the properties in the currrent document?
Are you using "Show as per Condition" or "Show as per Expression" to control the appearance of the conditional text?
In the insert source document, does the relevant paragraph hide when the condition is applied?
Is the condition name spelled identically (capitalization and spaces) in the inset and document?

Standard Texts and Text Modules

Similar Messages

Maybe you are looking for