Standard transaction or cube to control the workload per user BI

Hi,
Bw need to know if there is any transaction or any standard cube of BI content (Statistics BI), which allows me to see the BI workload.
What I need to know specifically is that cubes have greater access users, the queries that run .. etc, to see if the cube are used, how often and thus have a higher ranking of the least used.
Thanks.
pmarques

Hello,
I enabled the cubes 0TCT_C01, 0TCT_VC01, 0TCT_C02 and 0TCT_VC02, I loaded the data, but when I run the transaction ST03 dump I get the following:
Short text
    Exception condition "ILLEGAL_INPUT_SFK" raised.
Anál.errores
    A RAISE statement in the program "SAPLRSDRI" Raise the exception
    condition "ILLEGAL_INPUT_SFK."
    Since the exception Was Not intercepted by a superior
    program, processing Was terminated.
    Short description of exception condition:
    For Detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). Can You take the Call
    function module from the display of active calls.
Letters to correct errors
    If the error occures in a non-modified SAP program, You May Be Able to
    find an interim solution in an SAP Note.
    If You Have access to SAP Notes, carry out a search with the Following
    keywords:
    "RAISE_EXCEPTION" ""
    "SAPLRSDRI" or "LRSDRIU01"
    "RSDRI_INFOPROV_READ"
    or
    "SAPLRSDRI" ILLEGAL_INPUT_SFK "
    or
    "SAPWL_ST03N" ILLEGAL_INPUT_SFK "
    If you can not solve the problem yourself and want to send an error
    notification to SAP, include the Following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System-> List-> Save-> Local File
    (Unconverted) ".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
I've been looking at notes sap, but there are very old, and for versions lower than mine.
I am working with SAP BI 7.0 patch 19 and BI.content  7.0.3 patch 0.
I have also enabled the shortcut, sist.fuente.p.infofuente 3.X in virtual cubes.

Similar Messages

  • Exit or Badi for controlling the change of user status in notification

    Hi,
    I want to check the current user status of notification while saving the notificaton. If the current user status satisifies particular situation, then the notification should be save else not.
    Is there any user exit or Badi which can be used to control the change of user status in notification.
    Thanks
    SUMIT

    Hi Pushpa,
    Thanks for the reply.
    the problem over here is that the BADi IQS0_STATUS_MAINTAIN only allows to disable the user status.
    the other function module STATUS_READ only fetches the data from JEST.
    whereas my problem is that i want to check on the changed status on the screen(which is not saved also).
    Appreciate your reply on the same.
    Thanks
    SUMIT

  • Control the number of users logging in to the portal

    Hello,
    Is there any way to control the number of users logging in to the portal?
    Issue: We need to limit the users logging in Per Company (Access key).
    I read about the Activity Reporting in NW, and that would show us the stats, but does not let us control the logins.  I read all the forum posts on SDN about this topic, they were helpful, but none addressed our needs. 
    Has anyone implemented such functionality?  If we need a write a custom service or component to accomplish this, then which APIs should I be looking at?
    Our Portal Version: We are currently on EP6 SP2 PL 35, and in process of moving to NW.
    Any help on this would be much appreciated.
    Thanks,
    Harman

    Thanks for the replies, here's a little more info...
    We're working on project which allows a company to buy user licenses to access our portal.  So if a company has bought 5 licenses, the 6th user for that company will not be able to login.
    *Note: We treat each Access Key in the portal as a company.
    The way we determine if the user belongs to a company is by the AccessKey that is assigned to that user. We're not depending on IP addresses at all.
    Hope this clears the issue !
    I think we'll have to write some custom code to accomplish this.
    Thanks,
    harman

  • Standard transaction CG02 is not saving the data through F4 help.

    Hi Guru's,
    I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
                          Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
    Thanks in advance.
    Yours,
    Somu.

    Hi Guru's,
    I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
                          Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
    Thanks in advance.
    Yours,
    Somu.

  • How to use the *new* "per-user remote control"?

    Per the ARD discription page at:  http://itunes.apple.com/us/app/apple-remote-desktop/id409907375?mt=12
    It says under "Whats New in 3.5.1":
    "Per-user remote control
    You can remotely log in to a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login.
    How can I do this?  I can't seem to find the ability.  If I use ARD in it's "normal" mode, I am on the user's console at the same time they are.... I want to be "underneath" the console without affecting them.

    That capability is only available if your client systems are running Mac OS X 10.7 Lion. See:
    http://support.apple.com/kb/HT4715
    Regards.

  • Can I control the sound on users computer

    Hi
    I have a high school lab with 25 new intel iMacs. Is it possible to control the sound on the user computer so they can not use it. I have Mac server 4.10.10 and Apple Remote 3.0, etc. Any help would be appreciated.
    Perry

    Assuming you can't reset this by removing or locking the particular Sound settings in System Preferences via Workgroup Manager (WGM), then take a look at:
    http://discussions.apple.com/thread.jspa?threadID=1141459
    It's not exactly the same, but it might well point you at a solution.
    If you're just getting going with Macs in this particular environment, then you'll likely come to realize the Workgroup Manager and Server Admin tools are going to be your BFFs.

  • How can I control the bits per sample property in a TIF file when saving it?

    When I save an image in the TIF format the bits per sample property is set to the amount of bits that are used by the image. In my case I can also have 'dark' images where not all bits are used. For this I would like to set the amount of bits instead of the automatic check.

    Forte uses this as a default ...if you want the program to reference the directory the program actually resides in, you set that in the advanced properties for the source file that holds your 'main' in your program.
    Hmmm, not at home now, but ...right click the source file (from forte explorer window) that holds your main and look throught the various properties. It is somewhere in there that you can assign a different path than forte's default.
    If you ask me, the default should be the project dir.
    If you get stuck and no one else answers you will have to wait till I go home for further detail, but I am sure you can find it if you look hard enough.

  • SSAS Cube data display platforms (including per user permissions support)

    Hi,
    I've developed an SSAS cube for a small sales company. The company does not want to invest on sharepoint. They need to display cube data for each sales agent filtering his own records.  
    Excel and SSRS can display cube data but can they filter their data per user using the username in customdata? Can they connect with certain roles?
    Creating a .net application may also be a solution although it should take much time and effort for creation.
    What other options are there to display and work with SSAS cube data?
    What's preferable?
    Thanks
    Namnami

    Hi, 
    I didn't understand your above sentence: "there is only one
    hop and Kerberos is not required"
    what did you mean?
    I don't think roles is a good option for us, we have around 20 salesman and they keep on changing. 
    The cube currently displays in Performance Point by using CustomData and that works great. 
    But we want the users to consume it via excel, I just didn't understand clearly if username can be used
    safely without setting kerberoes. 
    Appreciate your advice!
    Namnami
    *** Update- I understand now, one hop meaning excel connects directly to cube does not require kerberoes and can use username(). Any example for two hops? Thanks a lot , you're advice really helped!

  • Solution to cap/control internet usage per user?

    On Mac OS or within Airport, is it possible to cap the internet usage of some of the users connected to an Airport netowrk? Is it easy to control the bandwidth usage or to allocate a specific amount og 'authorised' GB to download per month? Are they utilities to do that? Thanks for your answers!

    The only feature that the square 802.11b/g/n AirPort Extreme base station (AEBS) has is the ability to limit connection of specific MAC addresses to certain hours of the day. This is in AirPort Utility under "Access Control".
    The AEBS has no feature which allows you to control the bandwidth allocated to each client. Nor does it have any feature which tracks how much data a client has used.
    OS X's parental controls also offers some in the area of Internet access. You would need to visit the appropriate OS X discussion area and ask about them specifically.

  • What is the term " per user" in sqlserver developer edition licensing .

    Folks,
    I have to test my product with SQL Server 2012 database. Based on the search on ineternet, I know I have to get hold of Developer Edition
    and i should  go with  "per user" licensing model  for Developer edition . I am a bit confused here on what type of users they are ?
    SQL DB Administrator user
    Application Users account accessing the Database
    System Account accessing the Database
    Can some one please clarify.
    Thanks

    The Product Use Rights document is installed with the instance. EG
    C:\Program Files\Microsoft SQL Server\120\License Terms\SQLServer2014_License_DEV_1033.rtf
    Which states in relevant part
    1.   
    INSTALLATION AND USE RIGHTS.
    a.   
    General. One user may install and use copies of the software to design, develop, test and demonstrate your programs. You may not use the software on a
    device or server in a production environment.
    b.   
    Demonstration. Any person that has access to your internal network may install and use copies of the software to demonstrate use of your programs with
    the software. Those copies may not be used for any other purpose.
    c.    
    User Testing. Your end users may access the software to perform acceptance tests on your programs.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • How to trace the data dictionary tables used in the standard transaction

    Dear all,
    Help me to trace the data dictionary tables used in the standard transaction "crm_dno_monitor". I need to find the tables where the data are stored.
    or
    Tell me generally how to find the tables used in the standard transaction.
    Regards,
    Prem

    Hi,
    Open the program of that standard transaction in object navigator or SE80..
    Then click on the dictionary structures tab..
    U can find the database tables used in this transaction..
    \[removed by moderator\]
    Regards,
    Rakesh
    Edited by: Jan Stallkamp on Jul 29, 2008 5:29 PM

  • GOS for the standard transactions

    Hi,
      Other than the OSS notes,Is there any way that we can create the generic object services for the standard transactions.
    Thanks,

    None of the pre-installed apps can be deleted...look on every page & in every folder...still don't see it? If so: Settings>General>Reset>Reset Home Screen Layout...see if you see it now.

  • Copying standard transaction to Z-Transaction

    Hi,
    I need to copy standard transaction to Z-Transaction,
    i.e., MIRO to ZMIRO.
    And then I need to insert some code in one of the include program of ZMIRO.
    please tell me the various steps involve for copying a standard transaction.

    While copying a standard transaction may at first seem the easy way to achieve the functionality you need, there are a number of longer term negatives with this approach.
    If you copy major parts of SAP code like this, your copies will not be kept up to date as SAP OSS Notes are applied to the original using SNOTE.  You can manually apply such changes, but this is nearly always forgotten as the person applying the note does not always realise there is a local copy.
    This also applies when support packs are loaded - the SAP code can be changed without these changes being reflected in your copy.  In the worst case scenario, the change may result in your copy of the transaction performing invalid updates to data and causing data integrity issues in your system.
    When the time comes to upgrade the system, there will be a major amount of work in comparing the Z version of the code with the standard code to identify what is in the new version and to update the Z code - in a lot of cases this will mean a complete rebuild of the Z version is required.
    It is far better to use available BADIs, user exits, enhancement points and even repairs using the object key to achieve the desired result so that tools like SNOTE, SPAU, etc can keep the basic code up to date with the latest patches.
    Another option for some types of change is to build a custom screen that calls the standard transaction using BDC / Call Transaction or using a BAPI so that the data is presented as desired by the customer, but the updates still use the SAP supplied code.
    Andrew

  • Deactive field in standard transaction

    hi!
    I have a question:
    in a standard transaction, we need to deactivate the input of a field when the user fills it and save the document.
    I mean; the user couldn't modify the value of the field once the document was saved.
    anyone could help us?
    thank you

    Hi
    Yes it may be possible.
    For example for VA02 you may make some fields as display only through the exits that are available to modify the properties of screen elements..

  • Message box in standard Transaction

    Hai Friends,
    Greetings.
    In Vl01N (standard transaction) i need to add the message box based upon the user entry...
    How to do that pls guide me Friends..
    Regds.
    Vijay.

    Hai Esaki,
    Thank u very much for ur response.
    I implemented that badi but i dint get any changes in that transaction VL01n.
    if u dont mind pls guide how to check this ?
    Am new to BADI..
    Thanks & Regds.
    Vijay.

Maybe you are looking for