Standard Username an Password for the new Release2 As Portal?

i have installed the Applicationserver Release2 with Portal , but i can not access to the Portal with the Standard Username and Password , i need the new Standard username and Password for the new Oracle Portal(Release2)
the same Problem is with the Standard Username and Password for the iasdb (IAS Database on the Infrastructure Server !)
thanx
Saleh Matani

Hi,
You are facing strange problems with SDN :). May be connection at your end is too slow..
For the problem:
It seems you need a login password page. If this is your reuirement. Simple solution is create a page with two labels,two input fields, save and reset buttons. The login/pwd on submitted with validated by quering the database. Is your question - how to query the database ?
May be you can create a javabean to do that (you can use jdbc for logic). Later import the JavaBean as JavaBeanModel in Web Dynpro. Map the model to context in the view and use the context.
Regards,
Ashwani Kr Sharma

Similar Messages

What is the password for the new user account that is set up via Migration Assistant?

I recently purchased a new Macbook Pro, and used Migration Assistant to download My Documents from a previous PC desktop. The migration was successful, but afterwards the new user account that was set up to house all the new documents became inaccessible to me.
My administrator's password works for my computer and I am able to log in and out, change settings, etc.
However, if I try to log in to the new user account, no password works. Through the administrator's account I have also attempted to change the password, and I am allowed to do so, but when I use the new password I set up, it still denies me access.
Additionally, if I log out the administrator's account and click the new account to log in, it prompts me to make a new password for the account, and whatever I enter is also rejected as "incorrect." (The screen shakes)
I am very frustrated my inability to access this information I must use to work, and I have no idea what the password might be, or how to change it properly.
PLEASE HELP COMMUNITY! I have only had my mac for about a week and I have had it up to hear with this "user friendly" system.

You can change the password from Visual administrator. login to visual administrator, and select services,, under that you will find the system details. change the password.
even if the visual administrator password is expired then u can go thorugh configtoo.bat and there u can change the password.
if that even not possible then u need to login to sql and can execute the commands for changing password.
Regards,
mahesh

TS1702 How do change the old Apple ID username and password to the updated username and password for the apps store?

How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?

cbkitche wrote:
How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
Do you mean you kept the same account but you only updated your AppleID?
Just log out and log back in with new ID.
Note that the AppleID is embedded into the item at purchase and cannot be changed.
However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID.

What is the username and password for the airport extreme router

I just switched from a wired router to an airport extreme and im trying to access the router information by typing in my router into the search bar of safari, when I used my old router the username and password was admin, admin. but this isnt the case with the airport extreme, does anyone know what the username and password combination is for airport extreme?

Unlike routers from most other manufacturers, Apple's Airport devices cannot be configured using a web browser pointed to the IP address of the Base Station. Any manual configuration of the Airport Base Station must be done using the Airport Admin Utility provided by Apple.
FYI, when using the Airport Admin Utility the default password for the Airport Base Station is the word "public".

I changed my apple ID email address and now all my devices are signed in under the old apple ID, but it wont let me change the icould account on any without a password. The problem is my new password for the new apple ID won't work or the old? help!!!!

Help me!! I changed my email address associated with apple Id. Now ALLLLL my devices (iphone, mac, ipad) are associated with old apple Id. But It won't log out or delete the old one without having a password. Neither the old passowrd or the new password works. Now nothign works. Please help me!!

Hello Alexandra,
Thank you for the details of the issue you are experiencing with iCloud on your devices after updating your Apple ID. I recommend the following steps:
Symptoms
iOS 7 may ask for the password to your previous Apple ID when you sign out of iCloud.
Resolution
1. Use your current Apple ID password
Trying using your current Apple ID password. If that doesn't work, continue to the next step.
2. Sign out and back in to iMessage or FaceTime
If you are currently signed in to iMessage or FaceTime
If you are not signed in to iMessage or FaceTime
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud and try to sign out.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Tap Settings > iCloud and sign in with the new Apple ID.
Find the full article here:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M.

What is the username and password for the web page on the hp deskjet 2540 printer?

I need to administer my Deskjet 2540 through my web browser, but do not know the username and password. When it says log in it says 'The server http://[ip adress] requires a pasword. The server says: admin.' I have tryed to use admin as the usermane and no password but it does not work. Is there a way to reset the pasword?
Thanks

Hello there @Aokvilla , Welcome to the Forums!
For the issue you are having, I would recommend trying a different web browser for starters, and if that doesn't help, follow the instructions below from another post with a resolved solution. If those steps don't help, the problem could be your router.
HP printer requires a username and password by @pcwizard
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My phone is logged in as my old apple id and it is telling me that the password is wrong, but i am typing the correct password for the new apple id... how do i change it!

My phone is logged into my old apple ID and is telling me my icloud can not sign in. I am synced into the new apple id on my mac and there is no problems. I have reset the password about 4 times. I need help

Settings > iTunes and App Store > Apple ID = Sign Out...
Then Sign In using the preferred Apple ID.
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

Default username and password for newly created client in minisap

Hi all,
I am using the free SAP minisap provided by SAP. In this system i tried to create a user from tcode scc4 . when i try to login to the new client with the username SAP* and password minisap i am not able to login. What will be the default username and password for the newly created client in minisap.

In the new installation
The parameter
login/no_automatic_user_sapstar is set to " 1"
You create the parameter with value "0" & restart application server.
& Try to login into New client as SAP* with password "pass" - ( For a Standard System) - I don't what will be the default password in minisap.
Rgds
PR

Default username and password for WLC 5508 series

Hi ,
please let me know the default username and password for the below WLC device
Model :
AIR-CT5508-100-K9
Image : AIR-CT5500-K9-7-0-230-0.aes
Regards
Lerner

Password Recovery in WLC versions 5.1 and later
If you forget your password in WLC version 5.1 and later, you can use the CLI from the serial console of the controller in order to configure a new user name and password.
After the controller boots up, enter the Restore-Password command at the user prompt. This command is only accepted for the initial user login and becomes disabled after a user logs in. You are prompted to enter a new username/password, which can then be used to log into the controller and modify settings.

Forgot username 7 password for Isqlplus session

I had logged in isqlplus few months back. And now i forgot the username and password for the same.I am not able to login. Please help me to change to a new user name and password or to know the older one;
Thanks

It's mu home PC and i've installed Oracle server on my personal PC. But after a long time I'm using it. But not able to lgin bcoz i forgot the password for it. I used to login thru isql plus. I cud get database connector .
please help.

Multiple iCal icloud errors. One saying username and password incorrect the other Server 500 error when removing event

Good day all
One of my clients is having intermitting issues with her iCal on her Macbook. Her iCal is connected to her iCloud account along with her contacts, she access the iCloud data via her iPhone and her iPad.
The syncing between her devices with the iCloud gives her no issues when it comes to her contacts but her iCloud on her Macbook is causing a lot of grief. She can accept and add iCal events most of the time but every now and then she gets the error "iCal can't log into your iCloud account becasue your password may be incorrect. The server did not recognize your username or password for the account iCloud. Make sure you enter them correctly". Here is a picture of the error.
I can confirm her username and password is correct by clicking ok to the error and making an event in the calander or making a new contact in her contacts and confirm on icloud.com that the new additions did make it to the iCloud.
On top of the above error she also gets the following error intermittently (seems to happen the most when she attempts to remove a calander item). The error is "The server responded with an error. The request for "Meeting name" in "category" in account iCloud failed. The server responded with 500 to operation CalDAVWriteEntityQueueableOperation. Stay offline/Revert to Server/Go Online" once more below is a picture
Any help on this subject would be greatly appreshated
Thanks

Good day all
One of my clients is having intermitting issues with her iCal on her Macbook. Her iCal is connected to her iCloud account along with her contacts, she access the iCloud data via her iPhone and her iPad.
The syncing between her devices with the iCloud gives her no issues when it comes to her contacts but her iCloud on her Macbook is causing a lot of grief. She can accept and add iCal events most of the time but every now and then she gets the error "iCal can't log into your iCloud account becasue your password may be incorrect. The server did not recognize your username or password for the account iCloud. Make sure you enter them correctly". Here is a picture of the error.
I can confirm her username and password is correct by clicking ok to the error and making an event in the calander or making a new contact in her contacts and confirm on icloud.com that the new additions did make it to the iCloud.
On top of the above error she also gets the following error intermittently (seems to happen the most when she attempts to remove a calander item). The error is "The server responded with an error. The request for "Meeting name" in "category" in account iCloud failed. The server responded with 500 to operation CalDAVWriteEntityQueueableOperation. Stay offline/Revert to Server/Go Online" once more below is a picture
Any help on this subject would be greatly appreshated
Thanks

Password for a new bug tracker user

I installed bug tracker and it works fine. When I created a user I didn't find where to provide/change password. When I got login screen and type new user name, I don't know what is the password. How to set password for the new user in bug tracker?

It means that you can copy and paste an encrypted password from configuration file. Of course, passwords are encrypted if password-encryption service is enabled. Otherwise passwords are stored in plaintext in configuration files.

What is initial username and password for AWS instance?

I have a newly created Media Server on Amazon Web Services. The vm was created from ami-44cd4274.
The server is running.
What is, or how do I find, the default username and password for the Administration Console?

Hi,
Please refer to this:
http://forums.adobe.com/docs/DOC-2334
Hope it helps!
-Shiven

Changing DB username and Password for APEX

Hello Guys:
My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
Thank You For Your Help
Adel

Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
Thank You
Adel

Username and password for AS and portal and wirless

Hi,
I am newbe to As.
what is the default username and password for the AS and portal and wirless and emconsole.
please help me out that
Edited by: user3266490 on Sep 3, 2009 6:26 PM

Hi,
thanks for reply.I changed ias_admin password by jazn-data.xml.but i could n't able to login as PORTAL USER.
i tired to login portal user with ias_Admin password but there is no gain
and also how to find the INTEGRATED EBS SUITE with Application server in application console.
Edited by: user3266490 on Sep 4, 2009 12:12 PM

Standard Username an Password for the new Release2 As Portal?

Similar Messages

Maybe you are looking for