Standard version left behind on 64-bit support

How come 64-bit support is only available for the enterprise
version?
I shelled out a lot of money for various versions of Cold
Fusion standard but now I feel ripped off.
64-bit support has been slow to come on CF and is not even
available unless you're an enterprise customer.
What gives?

The following still run as 32-bit in the enterprise edition:
DataDirect Drivers, Verity Search functionality, and
ColdFusion .Net integration.
With that said they should have included the 32-bit version
of any 3rd-party driver where the cost is an issue, Adobe would
explained why and we would understand. Instead they chose a path
where they seem greedy.

Similar Messages

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

What version of Essbase Excel add-in support 64 bit Windows 7 on our PC?

1) Can anyone tell us what is latest version of 64 bit Essbase Excel-add-in 11.1.1.3.x and will this latest version of Essbase Excel add-in support 64 bit Windows 7 on our PC?
2) we downloaded Essbase excel add-in 11.1.2 and was not able to connect to Essbase 11.1.1.3 server. It gave an error message - "This version is newer than the Essbase server." Is there a workaround? (we were hoping 11.1.2 would support 64 bit windows 7)
ps. There is a knowlegebase article that teaches us how to get Smartview 11.1.2 to connect to Essbase. We could not quite follow the badly written KB artible, but Ms. V from Oracle tech support claims she was able to connect and she wrote the article.
We did manage to get Smartview 11.1.2 to connect to Planning 11.1.1.3!!

Thanks John and Jasmine.
John,
I am able to connect using Essbase excel add-in 11.1.2 and see the list of Essbase server 11.1.1.3 app/databases. However when I tried to select one of the applications/databases, I get the Essbase warning "This version of Essbase 11.1.1.3) is older than the version of the Essbase API (11.1.2.0) you are using."
I get sent back to Essbase system Login screen and am asked to select a app/database. Add-in keeps giving me the above message - none of the 11.1.1.3 databases would allow me to connect.
I guess you guys did not experience this problem?

Shadow Instance Left Behind in SLD After Using SUM

Hello,
Is there a standard procedure for removing the SLD information left behind by the creation of shadow ABAP instances when using SUM to update or upgrade systems? Should SUM have some final step for this built in, or should the update instructions include a step to go into SLD and delete the shadow instance information manually?
My situation is as follows. I recently updated the support package stack for my Solution Manager 7.1 system from sps4 to sps12 using SUM (this was for a new installation of Solution Manager). Afterwards, I used SOLMAN_SETUP to perform the System Preparation and Basic Configuration steps, and now I have progressed to Managed System Configuration. The first managed system to configure is Solution Manager itself, and in working on the SolMan ABAP instance, in step 6, 'Enter Landscape Parameters,' I noticed that there is an extra ABAP instance, DVEBMGS03, showing up as a landscape object node. I was puzzled for a bit about this, as there is no instance 03 in my SolMan system, only 00, 01, and 02. Eventually I figured out that SOLMAN_SETUP gets this landscape information from the obvious place, LMDB, which in turn gets it from SLD, and sure enough in LMDB and SLD I can find the "AppServer 03" instance defined.
That's when the light bulb hit. SUM creates a shadow ABAP instance when updating the support package stack (unlike using SPAM), similar to as it does during an upgrade. It deletes the shadow instance at the end of the update, but in the meantime the system has synchronized itself to SLD, and now SLD has a definition for that shadow instance that doesn't go away when the instance is deleted.
It's easy enough to manually delete it in SLD, of course, but that leads me to wonder if there's a preferred option for handling this other than manual manipulation of SLD data.
The version of SUM I used was 1.0 sp11 pl9.
Regards,
Matt

That's right, although for a support pack update, I'm not sure if the jobs even get suspended. In the past, when doing this with SPAM, there was no shadow instance to worry about, so it wasn't an issue. In upgrades, when there typically is a shadow instance, things are much more "shut down" in the system (jobs suspended, etc) than is often the case with support pack updates (though perhaps those should be just as much "shut down").
So in future I will definitely keep an eye out for it. Stopping the data supplier should be added to the tool and/or listed as a manual step in the guide to prevent inconsistent landscape and software component data from being replicated (or perhaps it already is and I missed it). I'm going to tag Boris Rubarth to get his take on it, as he is a key player in the development and maintenance of the SUM tool.
Deleting the extra instance in SLD was very easy, and I watched it replicate to LMDB very quickly, and it immediately disappeared upon refresh from the managed system configuration tool. However, it later showed up in diagnostics agent administration, as well, as a warning about a system path not being reachable by the agent (it was trying to reach \usr\sap\SID\DVEBMGS03, which doesn't exist), and so I had to edit the agent landscape paths to remove that as well).
Although the problem is long since solved in my system, as described above, I will keep the question open for a few more hours to see what Boris or others may have to add.
Regards,
Matt

"Invalid Binary" error on app. Apple's reason is "Missing 64-bit support" due to changes from Feb 1st 2015

Hello
Can anyone help me with an "Invalid Binary" error on my app.
Apple's response is:
Dear developer,
We have discovered one or more issues with your recent submission for "DPS Notes". To process your submission, the following issues must be corrected:
Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code.
Once these issues have been corrected, use Xcode or Application Loader to upload a new binary to iTunes Connect. Choose the new binary on the app’s Details page in My Apps on iTunes Connect, and click Submit for Review.
Regards,
The App Store team
Can someone from the Adobe DPS team let me know how I can recreate the .ipa file so that it will meet Apple's requirements.
They seem to have moved the goalposts since I created the original .ipa file in December. I thought I'd submitted it, just went back through iTunes Connect to check info as I hadn't heard anything from them, then hit this brick wall. Any help offered would be much appreciated.
Thanks
Rebecca

Hi
I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
I have put a support email into Apple, but don't expect a reply any day soon.
The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
Do you mean, going back to the Folio Producer Panel, and building a whole new App?
This process certainly isn't for the faint-hearted!
HELP!

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Consolidated iTunes library to different drive, but some files left behind?

I had been storing my iTunes library on an external HD. Now I have a new laptop and enough memory to move the library back onto the laptop's hard drive. I attempted to do so by reversing how I moved it in the first place -- I consolidated the library (using Preferences->Advanced to set the iTunes Media Folder Location to the standard folder on the internal HD). It took a while and the files were duplicated one by one on the internal HD. Except not all of them. Roughly 100+ songs, scattered throughout the library, are still stored only on the external HD. They show up in the library with an exclamation point, and I can listen to them if the external HD is hooked up, but obviously I can't if it isn't.
Is there an easy fix, and failing that, what's the painstaking manual fix I could go through?

The files that didn't transfer don't have any obvious differences from the files that did (they all have the same extension, as far as I can tell: m4p). Out of an album of songs from a particular artist, say, 11 songs will have transferred and one will have been randomly(?) left behind.
These are the basic instructions I followed re moving the Media folder and then consolidating:
http://support.apple.com/kb/HT1449
Thanks for any ideas!

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.
i go to the download page and i dont see a 32 or 64 bit option.
Please help! Thank you,
Carlos

lr 6 is 64bit only, System requirements
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Adobe Reader Version XI (11.0.06) vs Adobe Acrobat 9 Standard Version 9.5.5

Do I have to install Adobe Reader Version XI (11.0.06) when I have Adobe Acrobat 9 Standard Version 9.5.5 on my WIN7 Pro, just because Firefox 26.0 needs a newer plugin?

No. 9.5.5 is the latest version but it is no longer supported with updates. It is possible to get Firefox to stop blocking.
Version 11 does have significant security enhancements though, particularly on Windows.

Z@R temp files left behind with roaming profiles removal

See previous old post: Acrobat/Reader: [email protected] files left behind in Temp folder after printing
It states that the issue is resolved with Windows 7 and Server 2008 ang higher, however i'm running multiple Windows 2008 R2 servers and this problem is killing me.
A simple terminal server with only 5-6 users working on it, but abou 200 (left behind) user profiles.
What can i do yo fix this? Already tried the options in the article. Not working. Running multiple versions of Adobe Reader 11.0.xx
Please help.

Can anyone help me? In the meantime we have multiple servers, with multiple customers. And it is really getting fustrating?
I can't imagen Adobe does not care about this bug?

Data left behind after scripted imaging

I know this sounds a little weird, but sometimes after one of my techs runs one of the scripts we use stuff is left behind on the workstation (games, or media players that are not part of the image - but not everything). You can actually watch the image process and complete ok and restart the computer - it even goes though the post imaging stuff prior to login. Here is an example of one of the 2 scripts doing this sometimes -
dd if=/bin/mbr.mbr of=/dev/hda
dd if=/bin/mbr.mbr of=/dev/sda
img pd1
img pd2
img pd3
img pd4
img pc1 ntfs
img rp $PROXYADDR //$PROXYADDR/zen/images/imagename.zmg a1:p1
img pa1
reboot -f
It's happening on XP and 2000 latest updates on both, were currently running Zfd version 6.5.2. Has anyone seen this, or do you see any reason with this script that this would happen?? It works normally if you go though imaging w/o the scripts.
Thanks for any clues!!
Dennis

Dennis,
I had the exact same issue after updating from ZEN4 to ZEN7. The solution
for it was to change the command from:
img rp $PROXYADDR //$PROXYADDR/zen/images/imagename.zmg a1:p1
to:
img restorep $PROXYADDR //$PROXYADDR/zen/images/imagename.zmg a1:p1
That was the solution to my problem.
Hope this one helps for u
Greets
Tracer60
> I know this sounds a little weird, but sometimes after one of my techs
runs one of the scripts we use stuff is left behind on the workstation
(games, or media players that are not part of the image - but not
everything). You can actually watch the image process and complete ok and
restart the computer - it even goes though the post imaging stuff prior to
login. Here is an example of one of the 2 scripts doing this sometimes -
>
> dd if=/bin/mbr.mbr of=/dev/hda
> dd if=/bin/mbr.mbr of=/dev/sda
>
> img pd1
> img pd2
> img pd3
> img pd4
> img pc1 ntfs
> img rp $PROXYADDR //$PROXYADDR/zen/images/imagename.zmg a1:p1
> img pa1
> reboot -f
>
> It's happening on XP and 2000 latest updates on both, were currently
running Zfd version 6.5.2. Has anyone seen this, or do you see any reason
with this script that this would happen?? It works normally if you go
though imaging w/o the scripts.
>
> Thanks for any clues!!
> Dennis

Sun Cluster 3.1 64 bit support for Solaris 10

Hi:
I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
1) Does Clutster 3.1 for solaris 10 support 64 bit?
I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
Thanks in advance!
BRs
//rdctahu

Hi,
Comments on your 2 questions:
1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
fine.
As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
2) See (1). You are good.
Go for it.
HTH,
-ashu

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Why doesn't elements 12 have 64 bit support for PC users?

Why doesn't elements 12 have 64 bit support for PC users? Most PC's these days are shipped with far more than 2GB of RAM. This move seems very limiting to those with high demands for RAM. Image sizes are only getting larger meaning more RAM needed for adjustments and editing. I have been putting off buying elements 11 waiting to see if 12 had 64 bit support and I am very disappointed to find it doesn't. I can't see myself buying 12 unless a 64 bit for PC is launched soon.

Update? It's a major release, ain't it?
Mac got the 64-bit. Why? From Pete Green's announcement:
A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
But, of course, Windows users have no such need...

I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch. I checked the extensions folder and sure enough, the digidesign extensions were left behind. Can I revert back

I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch. I checked the extensions folder and sure enough, the digidesign extensions were left behind. Can I revert back to the "Archive" of my 10.4.11 System from the "Previous Systems" folder? If not, what's the point of creating the "archive"?

Did you select "Preserve User Settings"?
Archive and Install installation automatically moves existing system files to a folder named Previous System, then installs Mac OS X again. (See tip 3.) You cannot start up your computer using a Previous System folder, nor can you "re-bless" the Previous System folder. (See tip 1.)
You can choose to preserve your user and network settings before installing. This option automatically moves existing users, Home directories, and network settings. This also skips the Setup Assistant after installation.
Note: Because the "Preserve user and network settings" option moves, not copies, existing users, Home directories, and network settings, from the Previous Systems folder to the newly installed System, these items will not exist in the Previous Systems folder after the Archive and Install is complete.
http://support.apple.com/kb/ht1710
Read this:
http://support.apple.com/kb/HT2196
BTW, it is never recommended to do a major OS change without having a full, bootable backup.

Standard version left behind on 64-bit support

Similar Messages

Maybe you are looking for