Standard WBS Elements Screen layout/Settlement rule/IM assignment

Few questions about Standard WBS elements
1. Is possible to have my own layout for the WBS element detail screens while creating/changing the standard WBS element (CJ91/CJ92)?
2. Is it possible to maintain the settlement rules for the standard WBS elements?
3. Is it possible assign the standard WBS elements to the IM program/position?
I know that all the above possible are only in case of operavtive WBS.
If possible with Std WBS elements, please help me and let me know.
Regards
Sreenivas

Sreenivas,
I´m afraid that none of the 3 options is available via standard tools
I´m so sorry.
Rgds
Martina

Similar Messages

  • WBS Elements upload with settlement rule& classification

    I have created project profile & WBS elements with a BAPI bapi_project_maintain.
    Now i need to apply characterstic values and settlement rules to those WBS elements.
    I have been searching for a FM since long time.
    I tried with LSMW also,it did not work.
    Only way left to me is to write a BDC programs to full fill this.
    If anybody has got some solution for this let me know.
    regards
    KTSS

    Sreenivas,
    I´m afraid that none of the 3 options is available via standard tools
    I´m so sorry.
    Rgds
    Martina

  • Standard WBS Elements v Operative WBS elements as templates

    Hi
    I am considering the use of Standard WBS elements however one of the limitations that I have identified is that it is not possible to enter the any default settlement parameters into the WBS elements.
    As our Work Breakdown structures are a combination of both operative as well as capital WBS elements (for accounting purposes) it is not possible to enter the default Settlement Profile in the project profile.  ie: Mulitple settlement profiles are used across the WBS elements for a single project profile, depending on the required accounting treatment.
    Ensuring that users enter the correct settlement paramters for each WBS element cannot be gaurenteed and it does not appear possible to use sustitutions to populate these parameters.  Month end settlement is often problematic and the correct accounting treatment is essential so I am looking for alternatives.
    One alternative that comes to mind is to set aside a range of operative WBS elements for use as templates.  This would then ensure that all required fields in the operative structures are pre - populated including the settlement parameters.
    Has anyone used operative structures in this way and if so are there any potential issues?
    Thanks in advance.
    Ian

    Hi Hermant,
    Thanks for your ongoing input.  I am still not sure my original message was clear.
    The key point is that I am talking about using a range of operative structures as templates.  "lets just say the first 200 operative structures will be designated as templates."  These operative structures to be used as templates, contain different settlement parameters for each WBS element.
    In your first post you mentioned.
    "2. But this will not solve your purpose as copied projects will not have the settlement profile "as it is" in the std. operative WBS elements. Settlement profile gets defaulted from project profile... hence you will have to mainatin it manually again in the copied projects."
    and in your second post.
    "That is what I mentioned in my earlier post... although you maintain different settlement parametes in project which is to be copied.. it won't be inherited in new project. You will have to maintain it manually..."
    This is not the case, you actually do not need to maintain these settlement parameters manually when you copy an operative structure. (used as a template)  This is exactly why I am considering using operative structures and NOT standard structures as templates.  I agree, when using standard structures no settlement paramaters are inherited.
    As I mentioned in my first post the Project Profile will not contain a settlement profile.  Hence when the operative structure with pre populated settlement parameters is used as a "template" and copied to create a new operative structure all settlement parameters are copied / inherited to the new operative structure.  This is the result based on my prototype.  Try this, copy an operative structure that has pre populated settlement parameters and you will see that all these settlement parameters are copied.....at least in my system that is the way it works.
    I hope this helps clear up any misunderstanding.
    Regards
    Ian

  • FM for standard WBS element change - CJ92

    Hi all,
    Is there any function module to make changes in standars WBS element/proj.def tocde- CJ92.
    If any knows, please provide me the same.
    Thanks much!
    Chandra.
    Edited by: Sekhar on Apr 7, 2010 1:10 PM

    Thanks... Is this work for standard WBS elements ?

  • Numbering from standard wbs elements

    Hello,
    where do I have to define that wbs elements in a  project which is created by a standard wbs get the new number from the operative project and not the number from the standard wbs?
    I cannot find such a setting in the project profile or something like this.
    When I create a project from a standard wbs all of the wbs elements keep the numbering from the standard wbs!
    Thank you.
    Timo
    Edited by: Timo Renz on May 25, 2010 9:22 AM

    Thank you for your answer Virendra.
    I know the screen to replace the numbering manually. But I have seen the same functionality automatically in the IDES system without the question to replace and now I am searching for this setting but I cannot find a difference in the project profile.
    Caused by the number of wbs elements it`s not possible to set the numbering of each wbs elements manually.
    Is there any other object I can define this setting?

  • Problem in Include WBS Element Screen

    Actually i got some steps for CJ01(Create Project).
    It is saying that after going to WBS Element Overview screen and  making all the entries for WBS element and description select the INCLUDE button .
    I tried a lot but i am unable to search that include button.
    Please help me.

    I also tried a lot but i didn't find any solution for this.
    The step also says that a message will appear like(in case i have entered 6 WBS elements and after selecting INCLUDE button)
    '6 WBS elements were included'
    in the create project: project definition screen.
    Can anyone tell me that when this type of message appears while creating WBS .

  • Object class in WBS element screen

    Hi All,
    We are facing the issue of object class as required, when a WBS element is created for a project. In SAP 3.1, the object class is not a required field, but in ECC 6.0 system this field is showing up as required and we cannot proceed further until we enter some vaule in this field.
    Does someone know why this field is coming as required in CJ01 transaction, when creating a WBS element? The layout in OPSA transaction says its a input only field and not required.
    hameed

    Thanks
    Am agreed.
    Actually this problem I am getting in production after releasing the measures object class is coming blank in top level WBS
    am trying to test in development but i am getting object class once measures are released.
    Thanks
    Ashu

  • Profit Center not getting copied from WBS master data to settlement rule

    Hello,
    I am facing issues during settlement to G/L. From FI side we have set up some validations that the  FI postings shld always carry a Profit Ctr. Now when I am doing settlement to B/S account, the profit ctr from WBS master data gets copied to settlement details and hence on FI posting (Credit line).
    However when I am trying to settle to Expenxse/P&L account this is not happening. The profit Ctr is not getting copied from WBS master data to Settlement details and hence the settlement is not going thru. The profit derived is a dummy profit ctr and not the one on WBS master data.
    I have posted this query on FI forum too but no satisfactory answers.
    Pls let me know, what is the system behaviour....will the prof ctr on WBS master data gets copied on settlement rule details automatically ?
    Sarang

    Which exit do I use in OPSN? any thts or some exit in FI?
    I am on ECC-6.0...
    One thing to mention, the prof ctr is getting copied to settlement rules for Balance sheet account but not for P&L.This is more confusing...
    Sarang

  • Call WBS element screen in cj20n

    I am attempting to call trans. CJ20N when user clicks on a particulart WBS elements or project in an ALV report. If the user clicks on WBS element, CJ20N should open with that WBS elements selected. If the user clicks on project, CJ20N should open with that project. Can anyone tell me how i can pass the selected parameter to CJ20N.

    Hi ,
    Please find the below code for Project and WBS display . This should work . Please use your project number and WBS number at places highlighted below in RED.
    For Project :
       DATA: bdcdata_wa  TYPE bdcdata,
                  bdcdata_tab TYPE TABLE OF bdcdata.
       DATA opt TYPE ctu_params.
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_M'.
      bdcdata_wa-dynpro   =  '1000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_OKCODE'.
      bdcdata_wa-fval = '=OPEN'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'PROJ-PSPID'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_W'.
      bdcdata_wa-dynpro   =  '0900'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval =  'CNPB_W_ADD_OBJ_DYN-PROJ_EXT'.
      APPEND bdcdata_wa TO bdcdata_tab.
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_OKCODE'.
      bdcdata_wa-fval =  '=OK'.
      APPEND bdcdata_wa TO bdcdata_tab .
       CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'CNPB_W_ADD_OBJ_DYN-PROJ_EXT'.
      bdcdata_wa-fval = 'XXXXXXXXXX'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_M'.
      bdcdata_wa-dynpro   =  '1000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      opt-dismode = 'E'.
      opt-defsize = 'X'.
      CALL TRANSACTION 'CJ20N' USING bdcdata_tab OPTIONS FROM opt.
    For WBS Element:
    DATA: bdcdata_wa  TYPE bdcdata,
                bdcdata_tab TYPE TABLE OF bdcdata.
    DATA opt TYPE ctu_params.
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_M'.
      bdcdata_wa-dynpro   =  '1000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_OKCODE'.
      bdcdata_wa-fval = '=OPEN'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'PROJ-PSPID'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_W'.
      bdcdata_wa-dynpro   =  '0900'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval =  'CNPB_W_ADD_OBJ_DYN-PRPS_EXT'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_OKCODE'.
      bdcdata_wa-fval =  '=OK'.
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'CNPB_W_ADD_OBJ_DYN-PRPS_EXT'.
      bdcdata_wa-fval = 'XXXXXXXXXX'..
      APPEND bdcdata_wa TO bdcdata_tab .
      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLCNPB_M'.
      bdcdata_wa-dynpro   =  '1000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab .
      opt-dismode = 'E'.
      opt-defsize = 'X'.
      CALL TRANSACTION 'CJ20N' USING bdcdata_tab OPTIONS FROM opt.
    Thanks
    Sri

  • Standard Oracle report for the "security rules define/assign"

    Dear all:
    Is there any Standard Oracle report to show the :"Application --> Setup : Financials : Flexfields : Key : Security " flexfield "security rules define/assign" ?
    Regards
    Terry
    Edited by: Terry Chen on 2010/5/4 上午 2:27

    yes i believe there is one report in sysadmin or gl which shows this.

  • User cannot move WBS element even though both users were assigned same role

    If same roles have been assigned to 2 users, with same authorization values in all authorization objects for both users, but one user can move WBS element and the other cannot. Can anyone tell me why this happens?

    Hi,
    If parameters are also same, then check whether the roles were properly added. you can do profile generation again. Some times it may not updated the buffer of the user due to some temporary problem in the system.
    If still the problem exist, check with the functional team whether there is any other restriction presents other than authorization to SAP system.
    Regards,
    Sandip.

  • Settlement Rule and Assignment

    Hi Experts,
    currently i need to do settlement to 2 diffrent G/L accounts. However, from the transaction code, OKO6, I can only configure for one assignment per allocation structure. Is there any solution to this or a work around? Please advice.
    Thanks

    Try using source structure, this may help you out..
    How will this help Praveen? Can you please explain?
    Thanks & Regards,
    Amaresh Makal
    Edited by: Virendra Pal on Oct 13, 2010 9:01 AM
    Please read SAP help

  • Making Settlement rule mandatory for creating any WBS element

    Hello All,
    We have an requirement that system should not allow us to save any WBS element until the settlement rule is maintained.
    This we want only for WBS elements where Investment rule is not assigned.
    Can alyone help me to find out if this is possible, if yes then how.
    Points Assured.
    Thanks & Regards,
    Jatinder Bansal

    Hi,
       The only way it seems possible is using exists in validations.
    if not try to check the status of the wbs element in a validation. function module is STATUS_CHECK. and i think the system might set a special status, if a settlement rule has been maintained for a wbs element.
    Rgds
    Sudhir Reddy

  • WBS Element wise settlement report

    I require a report having the all WBS element code with settlement rule details the input shall be Project Deffinition. The report can be a standard report or from database table. Please suggest.
    I have already tried in the Table COBRB & COBRA. But it is not giving the suitable report.
    With regards,
    Uttam Maity
    Edited by: Uttam Maity on Aug 9, 2011 2:36 PM

    There is a standard report available in ECC 6.0 EHP4, KOSRLIST_PR. menu path Logistics - Project System - Financials -
    Period End Closing - Single functions - Settlement Rule - KOSRLIST_PR - List. You can create your own variant with inputs like project definition no, network number you can also choose a variant from list and then execute the report.

  • Generation of WBS Settlement Rule

    Hi Folks!
    I was wondering if there is any function module that allow me to generate a WBS Settlement Rule for a specific project and for elements on level 3.
    If there is no FM for this, is there any workaround to do this.
    Thx for any advise.
    Regards,
    Gilberto Li

    Hi Gilberto,
    Hm, not a question that has a simple answer. Settlement rules are first of all defined in customizing how the should be behave and secondly lies the question how to update a CO cost object with this settlement rule.
    Let us first assume that customizing is done with a settlement profile named ZZ_PROF for instance. This is defined in customizing like path (from R/3 4.7): Trans SPRO -> Project System -> Costs -> Automatic and Periodic Allocations -> Settlement -> Settlement Profile -> Create Settlement Profile.
    My first advice would be to use the "automatic settlement derivation feature" that can be setup in customizing alike. Trans SPRO -> Project System -> Costs -> Automatic and Periodic Allocations -> Settlement -> Settlement Rule for Work Breakdown Structure Element. Read the docu for this node (right click and choose Display documentation) to understand what possibilities and limitations this functionality has. Below this node you have the possibility to define a "settlement strategy" and allocate this to a project profile. There is also an option to define a BADi whereby you you can somewhat influence the automatic generation of settlement rules. You must "obey" the rules in the "settlement strategy" but can do some filtering of SD orders influence and derive a "settlement strategy" baseed on some coding logic of your choice.
    To execute these settings on operative projects you run trans CJB1 (collective processing) or CJB2 (indicidual processing).
    All in all: This is good functionality but maybe not what you are looking for due to the built in "restrictions" in the "settlement strategy" profile.
    My second advice would be: What I did in the past was to write a batch input program that was run just before period end closing (that is before settlement - of course) that did read all relevant WBS elements without a settlement rule and derived a new settlement rule. Finally, updated the setttlement coding block with this info. Processing of the BDC is then done via trans SM35 the normal way.
    I also did a check for trans CJB2: In include LKAZBF15 there is the "magic" call to the update FM with name KSRG_GENERATE_RULE. One option could be to set a break point here and run the trans to see what parameters has to be filled. This implies that the customizing is done before, of course. I have a feeling that this is NOT the easist solution to use - to fill the parameters correctly may be difficult
    I hope this helps you in deciding what action to take.
    Sometimes a simple BDC will do the trick although it may not be a "good" solution.
    Disclaimer: There might be some other relevant FM to solve your problem as I am not aware of. If you find one for WBS elements then I would certainly be interested in any findings.
    Regards, Johan

Maybe you are looking for