Standard widescreen sequence settings - PLEASE HELP!

Hi,
I've been trying for weeks to figure out the proper sequence settings / easy setup settings for videos that will ulitimately end up as STANDARD 16x9 footage.
Is there a direct 16 x 9 standard widescreen setting?
What I've been trying to do is to make a standard widescreen picture video slideshow that will end up being burned via idvd. But for the life of me I cant figure it out?!?!?
PLEASE HELP! Your assistance will be greatly appreciated!
Thanks!!!
PS
I do have Fianl Cut Studio Pro 2 studio.

"Standard" 16:9 is anamorphic.
Import your footage into FCP using a 16:9 preset, edit it and export it using 'current settings'.
Open up DVD Studio Pro and import the footage making sure to check the box that tells the program the material is 16:9.
x

Similar Messages

Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.

Hey , this is Satvir and my personal hotspot option is missing in my ipad settings please help it's urgent , please tell me what should I do

my personal hotspot option is missing from the settings , please help me out
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.

Some sequence settings/exporting help

I was given a video (specs below) that I am supposed to insert a couple of logos (some transparent pngs) that overlay the entire thing then send it back to the person that sent it to me. Its in an aspect ratio that is unfamiliar to me (320x240). He must have used a web cam. Every time I export it it comes out in 720x480 making the human and everything else in the video look fatter. Also, the video's file size is only 17MB and when I export it it comes out at 633MB! If you guys could help me out with this that would be unreal (and make me look good in front of the boss)! Places I think I could be going wrong is within sequence settings and export settings. I'm trying to export it as a quicktime movie using the quicktime compressor? Specs include:
source: /Users/robmatthews/Desktop/Video 8.wmv
format: Windows Media Audio 9 Standard, Mono, 32.000 kHz, Windows Media Video 8, 320 x 240, Millions
fps: 12.07
fps playing: 13-15ish
data size: 52.10 MB
data rate: 686.89 kbits/s
duration: 0:00:10:35.02
normal size: 320 x 240 pixels
current size: 447 x 336 pixels
Thank a lot in advance

This is quite a mountain to climb.
You have highly compressed WINDOWS MEDIA in a typical web pixel size, 320x240, and they want you to add a logo, but then no doubt return it in exactly the same format, right? You'll be VERY hard pressed to do that in FCP....it will require time, money, and loss in resolution when all is said and done.
You can't just use the file they sent and slap a graphic on it. I doubt that your clients realize that. You have to convert to an editable format that FCP recognizes, thus resizing the footage from 320x240 to 720x480, converting it from Windows to DV or DV50, converting the frame rate from 12fps to 24fps or 30fps...add the logo, then reencode it back to windows 320x240 with software that you will have to but to get it that way...like Flip4Mac. And the quality will looks significantly worse. A LOT of work for a bad outcome.
I doubt that this was shot at 320x240 at 12fps. This is not the master, this is the compressed result. If they want logos, they need to give you the FULL RES MASTER for you to work with, then you can send them a FULL RES master back for them to then encode for the web. I'll wager that they will want to send you an AVI or other PC format though...which again will need to be converted, edited, and converted.
As I said, quite a mountain, and I don't think FCP is the best choice here.
Shane

I cannot access my ipnoe due to i get a notification saying Not Enouhh Storage and i cannot get out of it or go to settings please help what can i do to fix this problem?

I cannot acces my IPhone due to i get a notification saying that i dont have enough storage and i need to back it up with ICloud but it wont let me click close or settings there for i cannot recieve calls or acces my email or text messages. I even tried turning off the power but it wont let me do anything please help !

If the iPhone won't Restart you should be able to Reset it. Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
For the future (in case you don't' know), go to Settings > iCloud > Storage & Backup > Manage Storage, and choose your Device under the Backups list.
Under the Backup Options turn off anything you don't care about (being backed up, that is). This will let you reduce the backup size so that it fits in iCloud again. You can also delete the current backup here.
You should also check Settings > General > Usage and look at how much data each app is storing. Identify problem apps and go clean out unwanted files.
Great resource as well http://support.apple.com/kb/HT5262
Hope this helps!

Error while Creating sequence. Please help

I'm using below script to create sequence but getting error
Error report:
SQL Error: ORA-01722: invalid number
01722. 00000 - "invalid number"
CREATE SEQUENCE BL_BTN_MASTER_SEQ
MINVALUE 1
MAXVALUE 999999999999999999
INCREMENT BY 1
START WITH (SELECT MAX(BULLETIN_MASTER_ID)+1
FROM BL_BTN_MASTER)
NOCACHE;
FYI..Data type of bulletin_master_id column is NUMBER(22,0)
PLease help.
Edited by: user11228834 on May 29, 2013 10:22 AM
Edited by: user11228834 on May 29, 2013 10:23 AM
Edited by: user11228834 on May 29, 2013 10:25 AM

Oracle doesn't like the "(select max(bulletin_master_id)+1 from bl_btn_master)' statement embedded in the CREATE SEQUENCE statement because if you look at the syntax it is expecting an acual number. You could use execute immediate to create the sequence this way:
{code}
declare
v_seq number;
v_statement varchar2(200);
begin
select max(bulletin_master_id)+1
into v_seq
from bl_btn_master;
v_statement := 'CREATE SEQUENCE BL_BTN_MASTER_SEQ ' ||
'MINVALUE 1 ' ||
'MAXVALUE 999999999999999999 ' ||
'INCREMENT BY 1 ' ||
'START WITH ' || v_seq ||
'NOCACHE';
execute immediate(v_statement);
end;
{code}

Wont let me into itunes store due to network settings, please help!

I previously had no problems with the store and have regularly purchased from it. Since going wireless I can no longer get in and now when I try through modem it doesn't work either.
I have flushed the DNS settings as advised, but, no joy. If anyone has any ideas please help me.

Try these;
1 - http://docs.info.apple.com/article.html?artnum=302182
2 - http://docs.info.apple.com/article.html?artnum=304082
3 - http://docs.info.apple.com/article.html?artnum=93434
4 - Check the firewall on your broadband router/modem.

Admin account switched to standard with Lepard instal, please help!!

I'll try to make this quick and easy. I have a mac mini that came with 10.4.5. I continuously performed updates and had no problems until July. In July my computer completely crashed so I reinstalled 10.4.5. After the install I could not get the updates to work, I even went back and tried the the first update for 10.4.5. (Important note) at this time my admin account was still active and working. So with the computer not updating I decided to install Leopard. The Leopard update was successful except for the fact that my admin account was changed to a standard account. This is where the problems really starts. Please keep in mind that I have weeks of research into my problem and every solution I've tried so far has not worked. Here are just a few examples of what I have tried. I have tried to enable the root user through directory utility, accounts, 10.4.5 install disk utility reset password and a couple of other methods that I cant think of off the top of my head. Now hear are the problems I'm having. Some of the enable root options require an admin account and password. Other enable root options require that I go to certain files or folders to enable the root but with this option I don't have that file or folder and/or it does not work due to the fact that my computer is 10.4.5 and not 10.5 and newer. Now the last couple of options require that I run the install disc to reset password or that I trash everything and start from new. The problem with this is I can't get the install disk to run. I have tried to insert the disk, click on the install icon but it requires an admin name and password to preform a restart. I have kept the install disk in the drive and have performed restart and shut down/power up from the apple menu. I have powered down and back up with the power button. Now keep in mind that I have tried every option without holding down the "C" key and with holding down the "C" key with no results. So to sum this last bit up, no matter how I try to restart the computer the install disk will not run and my computer will boot up like normal and bring me to the desk top. One more note, I have tried all the restart options with the 10.4.5 disk and the leopard disc. At this point I want to start from scratch and perform an install of 10.4.5. At this point it does not mater if I loose everything since it is all backed up on an external HD. Please help I am open to all ideas and options.
Thanks, Dan

Dan, does it stat in Single User Mode? If so, we can get a new admin User.
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

Which Sequence Preset Please Help

I'm making a small video for my internship and using adobe Premiere.
I've however run into a few problems. The camera was outputing video in AVCHD(.mts) files which where not working.
I've nowstarted to convert the files into different formates. But I'm unsure of what squence preset to use given the file type. currently I have a file that is:
Type: MPEG Movie
File Size: 62.5 MB
Image Size: 640 x 480
Pixel Depth: 32
Frame Rate: 30.00
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:05:00:02
Average Data Rate: 213 KB / second
Pixel Aspect Ratio: 1.0
I however think it may be a better idea to convert them to AVI but when i try to import the AVI files i get a ERROR:
Codec missing of unavailable.
What is the best Preset Sequence to use with the MPEG files?
Please help!

Type: MPEG Movie
File Size: 187.5 MB
Image Size: 1280 x 720
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:59:23
Average Data Rate: 639 KB / second
Pixel Aspect Ratio: 1.0

Wifi option is greyed out and wont fix after restoring to factory settings--PLEASE HELP!!!

my wifi option is "greyed out" therefore it doesnt allow me to connect to the internet. Ive restored it to factory settings, its still greyed out. Please, please, please help me out here.

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Since I got my iPhone 4 when I send mail on my ipad it goes to people's spam files. I must have done something wrong to settings please help.

Since I got my iPhone 4 2 days ago whenever I send mail from my ipad1 it goes to everyone's spam files please help. I'm sure I did something to the settings I just can't figure out on which device and how to fix it.

You might need to send your iPhone back in to Apple, go to an apple store, or get a new iPhone unfortunately. I personally would go to an Apple Genius at the Apple Store. They're really good.

Blackberry Curve 8330 (Facebook Push Notification Settings) Please Help

I have a BB Curve 8330. I received a warranty replacment two days ago. I installed the Facebook application and I am not receiving push notifications to the Facebook App on the Blackberry.
The thing is, I used to receive push notifications to the FB App on my original 8330 Phone. I looked at all my Settings on Facebook.com, And Installed Facebook App for Blackberry.
Could anyone please help me out? My Friend has a BOLD and he was receiving notifications instantly to his Facebook App on his BB Bold, while I was not. And we even compared settings and they matched, I am getting e-mail notifications to my account so I am receiving the notifications, just not thru the Facebook App on the phone......what gives?
I did a Hard reset, and reinstalled my Facebook Application to the phone.
HELP Please!
I figured it out. The email address associated with my facebook was not setup on the Blackberry. Facebook e-mails my acocunt then that pushes to the Facebook App on the Phone.
Message Edited by bbuserct on 07-31-2009 10:30 PM

I'm having the exact same problem!

How do I delete a (standard) user account? PLEASE HELP!!

I made a standard account and realized that i didn't need it, so i wanted to delete but i couldn't. I already went on my admin account, went to system preferences, and unlocked the lock thing on the corner with my password. But I can't click on the standard account I want to delete or the minus sign on the bottom because its grey... Is this suppose to happen?! Is there something wrong with my laptop D: My laptop is pretty new, I got it like 3-4 months ago. I've been trying to look up ways to like fix this but I couldn't find it. Maybe I'm not looking hard enough, but I really want to delete it. Please help! Thank you!

From Accounts: click Login Options (bottom of the User window pane). If there's a check mark infront of "Show fast user switching menu as" it's enabled.

WAP and MMS settings, please help.

I just bought a new phone after spending years with very basic ones (I have a history of breaking things and don't really trust myself with decent ones yet)Bought one that was locked to tesco, got it unlocked and then found out that 02 don't have the settings for it. Typical.I've looked at a few other forums and nothing has worked so far, it is a samsung C3530. I would really appreciate any suggestions.Btw I am useless with technology, please help!

Make sure you have opened your browser and found options / settings / advance and set your browser to use your new manually installed settings as the default. You should be able to get most devices running with just the apn, username and password (payandgo.o2.co.uk payandgo password). If you are still having issues, just book an appointment with your local O2 guru, I am sure they will be able to get you up and running. Good luck and hopefully you will be up and running shortly.

Display Settings - please help.

I've read all the posts on this and nothing has helped so here I go...
I have a 13 inch Macbook Core 2 with OSX.
I have a Acer 19"W LCD display attached using a MINI-DVI to VGA Adapter.
The monitor's native display is 1400x900. I can get only 1400x1050.
I'd sell my first born just to be able to scream at this thing and say "1400x900!!! I own you!"
Someone please help me. If I spend another hour on this I'm buying a PC, and fixing the wobble in my kitchen table with my Macbook.
Thanks.

The display is supposed to send information about supported resolutions to the computer through the display connector. Not all displays send correct data. SwitchResX or DisplayConfigX will force the computer to the resolution you want, even if it didn't get correct information from the display. Read the instructions carefully, so you don't get the computer stuck at an invalid resolution.

Standard widescreen sequence settings - PLEASE HELP!

Similar Messages

Maybe you are looking for