Standard Work Flow for Goods Receipt

Hi All,
I am working on Work flow is there any standard work flow for Goods Receipt?
If so please help me in this regard.
I found a BO BUS2017. Is this right one?
Thanks.
Ranganadh.

hi,
Refer to the link.
Automatic mail sending for goods receipt
Regards
Sumit Agarwal

Similar Messages

Work flow for Goods issue MIGO_GI

Hi friends,
I want to develop a work flow for good issue MIGO_GI transaction. Is there any standard work flow this scenario.
When I deliver the 4 materials, the Material cost is 100*4 = 400, if the Material cost is greatr than 500, mail should trigger to the manager, if it less it will go to the first approver.
please advice me in this.,
regards,
Ajay

I think no stanadard workflow will provide you with such a validation, Better to design your own customized workflow template,
Follow the below steps.
1. Open PFTC select the task type workflow template
2. Click F5 and define the relevant fields and make the agent assignemnt for the workflow template as general task from the menu addtional agent ---> agent assginement --> maintain --> general task.
3. Check the BOR BUS2017 this might be useful.
Check the method GoodsMovement.SAPCreate and its parameters interface, if you can get the total values of the then include a condition and validate th total cost if is satrisfyies send mail and workitem to approver, if it does not satisfy then send only workitem to approver.
Check the below BADI's
MB_BAPI_GOODSMVT_CREATE        MB_GOODSMOVEMENT
MB_BATCH_MASTER                MB_GOODSMOVEMENT
MB_DOCUMENT_BADI               MB_GOODSMOVEMENT
from where you can trigger your customized workflow by using the standard fm SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW*

Standard sapscript / smartforms for GOODS RECEIPT

Hi,
Can anyone tell me standard sapscript / smartforms for GOODS RECEIPT
-John

Here is your answer from NACE
Output type WF01 or WF02
Application ME
Program SAPM07DR
Form routine ENTRY_WF01 or WF02
Sap script: WE_FERT_VERS1 or VERS2 (this is for GR for prod. orders)
Or
Output type WE01 or WE02
Application ME
Program SAPM07DR
Form routine ENTRY_WE01 or WE02 or WE03
Sap script: WESCHEINVERS1 or VERS2 or VERS3 (this is for GR for normal purchase orders)
I would suggest you use the latest version.

Standard Work flow for Leave approval in HR module

Hi ,
My query is there any standard work flow available in HR module for Leave approval and Over time approval. We have negative time management and with out ESS and MSS.
Pl suggest if any one has used this earlier with out ESS or EP
Regards
Punit

I can think of the following but not without enhancement for the workflow part.
- Since you are not using ESS, you (leave admin) may create the absence record directly in IT2001 (in LOCK mode).
- In the user exit of 2001 you may trigger your Workflow process (i.e. call the function module to trigger WF here) depending on the LCCK status. You have to explore if standard WF can be used to your requirement.
- Upon approval, you can UNLOCK the absence.
- In the event that UNLOCK is unsuccessful, trigger WF to your Leave Admin for him to update via PA30.
Standard SAP Workflow
- Only 1 level approval
- Using Chief Position
IF your workflow requirement deviates, then you have to also customize workflow, does not matter whether you are using ESS or not.
Finally test and retest to make sure all possible events are covered.
OT is the same, except that you need to use 2007 vs 2002
Edited by: sapuser909 on Nov 18, 2009 12:07 PM

IT0022 Education- Is there a Standard work flow for ESS??

Hello All,
is there a standard work flow in SAP where in an employee updates his education details in ESS and a work flow is triggered either to Adminstrator / Manager to approve the same? if aint...how to make this possible, anyworkarounds?
if yes, in what versions is it available/where?
Any help wld be rewarded with Points.
thanks
hrbuddy
**where can i look for standard ESS & MSS related workflows**
Message was edited by:
Hr Buddy

There "IS" a central place where workflows can be accessed in SAP...which i eventually foundout...it is thru Tcode SWDM - Business Workflow Explorer
There we need to check for component that we are looking workflows for....
for example :
EP-PCT-MGR-HR - Business Package for Manager Self-Service (HR)
PA-ES - Employee Self-Service
PT-EV -Time Evaluation
And ofcourse Bus.Pack Documentation is always useful.

Standard web services for Goods receipt and purchase order

Hi,
Can you please tell me the std web services for creating the Purchase order and Goods receipt?
Is there a link where i can get the information on this implementation?
Thanks
Srini

Hi,
Please reffer ES workplace.
[Order to Cash|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=9B0DDD8CCC484FA79EBBBA7F78B57DA7]
Thanks
Farooq

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

Trigger Work Flow for payment release

hi guys,
kindly help me how to trigger the standard work flow for Payment release ((WS00400012).
With Regards
Pradeep N

enter the Workflow
in SWDD : WS00400012
click on Agent Assignment and assign the Approver USer ID.
click on the event linkage and activate and save.

SAP STANDARD RETRIGGER WORK FLOW FOR SC CHANGES -SRM 550

Hello ALL
assume that we use any standard sap WF templates
SC created
SC awaiting for manager approval
now requester changes any piece of data . will work flow retrigger ( again workitem created) for any cosmetic changes upon standard work flow templates used?
what are the actions on shopping cart will retrigger the workflow
now sc is awaiting for approval but below actions done by REQUESTER in the shopping cart
1. changing sc descrition name?
2. notes for approval?
3.change qty /price /uom/ pg /product changes/ cost center changes /add attachment
4.changing vendor
please share what are the above actions will retrigger the workflow in SAP STANDARD.
etc
Mutu

Hi,
There is BBP_WFL_SECURITY setting in SRM 5.0.
http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm
I'm not sure if the table BBPD_COMP_FIELDS is for checking the changes.
We can get answer by testing.
Regards,
Masa

Standard IDOC for Goods Receipt

Hello ppl,
I have a requirement wherein I need to trigger an IDoc whenever a Goods Receipt is saved.
Is there any standard outbound IDoc for this functionality?
Please help.
Thanks,
Dawood.

HI
Trigger an Idoc when GR is saved.
Re: Idoc type for Goods Receipt
Regards
Pavan

Steps For Goods Receipt For Work Order Using Handling Units

Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue?

Standard smartform for Goods receipt slip version 3

Hi all,
I need to copy and modify a smartform for Goods receipt slip.
How do we find out the main program(driver program) for a smartform.
In my case the smartform name is /SMB11/MMGR3_A
Regards,
Kaushal

I used /SMB11/BL_MMGR1_L in my choice and I then searched programs using /SMB11* until I found something that looked like a match in it's text.
I can only tell you that after configuring via tcode NACE application ME and output type WE03 (because again the text matched what I was wanting to do) with program /SMB40/M07DR it did give me the results I wanted. This is a specific answer and NOT the more general answer you might have really wanted. There is much discussion in forum for that more general question. Personally until SAP sees the wisdom of maintaining a table to make a more direct search key more possible rather than a full SAPSCRIPT, SMARTFORM, PDF search we have some agony to endure.
Now if can you tell me where (table & fields) number of containers found on tabstrip Quantity of tcode MIGO is stored and we can call this even.
GOITEM-ANZGEB is NOT the answer I want to hear as structure names do not count and it is not defined in any structures of the global settings.
Good Luck!!!

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

BAPI needed for Goods Receipt Purchase Order(Transaction : MIGO)

Hi all,
We have a requirement where in we need to post the documents throuh BAPI for Goods receipt Purchase order(Transaction: MIGO).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

Hi,
use 'BAPI_GOODSMVT_CREATE'
Check this sample.
code
REPORT ZRICH_0001 .
Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM TYPE TABLE OF
BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE = SY-DATUM.
GM_CODE-GM_CODE = '04'. " MB1A
Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412' TO GM_ITEM-MOVE_TYPE .
MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1' TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC' TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901' TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = GM_HEADER
GOODSMVT_CODE = GM_CODE
IMPORTING
GOODSMVT_HEADRET = GM_HEADRET
MATERIALDOCUMENT = GM_RETMTD
TABLES
GOODSMVT_ITEM = GM_ITEM
RETURN = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
[/code]
Also check the Bapis
BAPI_PO_CREATE --> To create Purchase Order
BAPI_PO_CHANGE --> To change Purchase Order
BAPI_PO_GETDETAIL --> Todisplay Purchase Order
Regards,
Raj.

Print programs for Goods Receipt, GI, ST, Subcont. TP, Consignment TP ...

Hello Gurus,
There is a Business requirement to have a separate print forms for every Inventory transactions like Goods Receipt, Goods Issue, Stock Transfer, Sub-Contracting Transfer Posting, Consignment Transfer Posting, etc.
We need to use the Transaction MB90 to print all the Inventory documents.
While checking the Output types, we find that basically WE03 is for Goods Receipt (Collective Slips) & WA03 is for Goods Issue / Transfer postings (Collective Slip)
I would like to know that inorder to assign a different Smart Form & Program (One for each of the transactions listed above) to the output types, is there a way around to work with these 2 Output types & have the 5 different Smart Forms - Programs assigned to these 2 Output types or do I need to create a copy of these output types & use them instead, one output type for each Smart form - Print program combination
Regards,
Zafar.

First, you can maintain PRINT ID in the IMG for each movement type 
Second, you can create multiple OUTPUT TYPE - one for each.
Third, in MN21, create ouotput records using a combination of OUTPUT TYPE and PRINT ID
 
Example:
GR movement types 101, 105, etc, you can have PRINT ID 1 and OUTPUT TYPE Z001
GI movmeent types 201,261, etc. you can have PRINT ID 2 and OUTPUT TYPE Z002
 
Configure PRINT ID: IMG path: Materials Management > Inventory Management and Physical Inventory > Print Control 
Configure OUTPUT TYPE: IMG path: Materials Management > Inventory Management and Physical Inventory > Output Determination

Standard Work Flow for Goods Receipt

Similar Messages

Maybe you are looking for