Standard Workflow for PR Release Multi-level

Good day,
I have a multi-level PR release strategy connected to workflow and using exit M06B0001
Structure is as follows
Release Codes:
A1 - first level
A2 - first level (back-up)
B1 - second level
B2 - second level (back-up)
Objective: (upon creation of PR, Release Indicator = 0)
1. Notification Workflow to A1 and A2 for releasing
2. A1 or A2 releases PR. Release Indicator = 1 (for 2nd level)
3. Notification Workflow to B1 and B2 for releasing
4. B1 or B2 releases PR. Release Indicator = 2 (for PO processing)
#1 and #2 works. But does not proceed to 3 and 4. Return message after A1 or A2 release is "PR XXX Released".
How to solve this?

Hi RIck/Ragavendran,
Thanks for the response.
Am not using value as indicator for level. This is all under one release strategy.
A1 or A2 should release in order for B1 or B2 to proceed. Once any combination between A1/A2 and B1/B2 would result in PR fully released.
I've tried both scenarios of using and not using pre-requisites in my configuration. Both resulting the same.
Regards,

Similar Messages

  • SAP Standard Workflow for PR Release (with user exit)

    Hi SAP WF Gurus,
    Good day!
    I just wanted to check with you if you have ever used a user exit in the activation of the standard workflow for PR (overall ( release. What we have is a two0step approval process wherein each level has a proxy/alternate approver. We used the available user exit to accommodate this customer requirement since the standard release would only allow us to define 1 approver as a prerequisite for the next level. We were able to execute this on the first level approval; however, we observed that the workflow is not anymore triggered (i.e. does not send work items to agents) for the level 2 release. My questions therefore are:
    1. How to set up SWEC? I already executed SWELS and SWEL to check if the events are being created and event linkage is automatically deactivated after running into an error regarding the binding...My initial SWEC setup is for BANF BUS2105 RELEASED On Change. I am assuming that since the workflow was released from the first level, this should be the starting point
    2. How to rectify the binding error? I already executed automatic binding in the WF header for the start events but still face it
    Your inputs/comments are most welcome
    Regards,
    DeLo

    Just to add:
    The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
    Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

  • Workflow for PR release

    Dear Experts,
    We have implemented SAP standard workflow for PR item release i.e WS00000038, when I reject a PR notification is not sent to initiator.
    If I see In SWEL - When a PR item is rejected system is picking up step "PR item significantly changed" instead of "Item release cancelled"
    Request your suggestions in this regard.
    Thanks,
    Uzair

    Hi,
    Please see the below thread, it may help you.
    Re: Trigger Purchase Requsition Workflow trigger after purchase req. changed

  • Standard workflow for FB60 vendor invoice

    Dear experts,
    I am looking for a standard workflow for transaction FB60. Is that WS00400012(BO: BSEG)?
    I just wonder if I could check the link between a transaction and business object.
    In SWO1, BSEG is noted as "Accounting document line item". So i am not sure if it is for Vendor Invoice.

    There are several standard workflows for vendor invoices.  WS00400012 is for release of payment. If that is what you are looking for, it is fine. But go to the customizing to find more information about both the release for payment solution and the release for posting solution from SAP. Can't recall the customizing path now, but it is in Financial Accounting, I think the path is Accunts Receivable and Payable, then Business Transactions, and there you will at least find the Release for Payment part of it. The customizing screens are partly common, but the help available for the customizing nodes is most likely specific for each solution. I have never set up release for posting, so I don't know it.

  • Error in event receiver in workflow for PO release strategy

    Hi Expert,
    I am trying to trigger an email through workflow for PO release. I have setup following
    In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    In PFTC, under Triggering events, Object type BUS2012 is green light
    When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

    laurarice wrote:
    Hi Expert,
    >
    > I am trying to trigger an email through workflow for PO release. I have setup following
    >
    > In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    > In PFTC, under Triggering events, Object type BUS2012 is green light
    > When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    > Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
    I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

  • Standard workflow for downpayment request approval

    Hi,
    Is there any standard workflow for downpayment request approval?
    Please suggest.

    Hi,
    There is no standard flow for the down payment request generally in many projects down payment requests are rarely created process starts with Down payment request F-47 then Down payments F-48
    then clearing of Down Payment f-54
    Down PAyment request is just a template.If you want to use then use then u can skip this step.
    regards
    Deepa

  • Standard Workflow for Logistics invoice blocked for Quality

    Hi friends
    Edd here
    I am wondering if there is a standard workflow for invoice verification if the invoice is blocked for QUALITY (not quantity)
    i.e. if the Goods have been receipted Movement Type 103, to blocked stock, this should block the invoice.
    Is there a standard workflow to pick up this event (RSEG-SPGRC ('Blocking Reason: Quality' = X)
    Thanks and regards
    Edd

    There is no standard workflow for Quality, but you can create your custom wrokflow using similar logic what has been used for the Qty workflow.

  • Business Workflow for PR Release...

    Hi Experts,
    Can anybody please tell me how to work with BUSINESS WORKFLOW for PR Release from scratch.
    I am new in Workflow and i had tried with myself but not getting exactly.
    Please reply me with step-by-step process from scratch to release PR.
    thanks in advance..

    Where did you get stuck? All the steps needed could be found in the customizing and the customizing documentation explains them. Also make sure you have done the workflow configuration in SWU3.
    Regards,
    Martin

  • Can i use standard workflow for invoice block ? (BUS2081 . WS20000397)

    Hi Experts ,
    Please any one help me to use the standard workflow for Handlinig invoices blocked(T-code MIRO ). 
    I want an email sent , when  PO invoice is posted and blocked with attched PDF format .
    checked Business object BUS2081 . and Workflow WS20000937.
    But not sure how to use . Please help me to used to get the mail using the standard Workflow .
    Thanks .

    HI
    Iam not pretty much sure about MM or Invoices I found one of the [SAP Help documentation|http://help.sap.com/erp2005_ehp_04/helpdata/EN/0e/0e3b0cb84111d3b5b2006094192bbb/frameset.htm] . This might help you to process ahead.
    Regards
    Pavan

  • Standard workflow for FBD1

    Hi FI Guru
    As per requirement,we have to create approval flow for recurring document (created in FBD1 for first time) also like FV60.
    Is there any SAP Standard Workflow for this and how to see that.
    Thanks in advance

    Hi,
    There is no standard flow for the down payment request generally in many projects down payment requests are rarely created process starts with Down payment request F-47 then Down payments F-48
    then clearing of Down Payment f-54
    Down PAyment request is just a template.If you want to use then use then u can skip this step.
    regards
    Deepa

  • What is the standard workflow for Travel expense ?

    Hi guys
    i am looking for the standard workflow for travel expense. I did a search on the forum but count find a answer. I also searched SWDM - Workflow browser. I coudnt find one. Can anybody let me know which is the standard workflow for Travel Expense?

    Hi
    Check out these links.
    [http://help.sap.com/saphelp_47x200/helpdata/en/04/928ba746f311d189470000e829fbbd/frameset.htm]
    [http://help.sap.com/saphelp_47x200/helpdata/en/19/8460e002474d4a866da32a8d9c6c73/frameset.htm]
    [http://help.sap.com/saphelp_47x200/helpdata/en/cb/c11038b42b7858e10000009b38f8cf/frameset.htm]
    Regards
    viijay

  • Standard workflow for SO approval process in CRM

    Hi all
    I would like to know if there is any standard workflow for Sales order approval process. I have tried my best and couldnt come across any.
    And also what is the commonly used approval process?
    Thanks & Regards
    Mui Kanva

    Hi
    check workflows: WS10000279 and WS10001068 (aut approval).
    But we created our own schema to implement two step approval.
    Regards
    Radek

  • Standard workflow for Service Order

    Dear Experts,
             I am working in SAP-CRM Implementation Project.Is there any Standard workflow for Service Order.It is very urgent Please help me.
    Thanks & Regards,
    Ashok.

    Hi
    go through the link below for workflow
    http://help.sap.com/saphelp_46c/helpdata/en/a1/172437130e0d09e10000009b38f839/frameset.htm
    Dinaker vikas

  • Activate standard workflows for ECM Approval

    Hello,
    I have to activate these standard workflows for ECM. Can anyone help me with the steps I need to follow?
    WS04000022 ECM_SUBMIT
    WS04000023 ECM_APPROVE
    WS04000024 ECM_REJECT
    WS04000025 ECM_CREATE
    Regards,
    MAK.

    Hello,
    Have you tried to activate the workflows in the Workflow Builder:
    SWDD -> enter workflow -> Activate
    Cheers,
    Adalbert

  • Issue with PO release (multi level approval)

    Hi,
    Need help regarding PO release. I am working with 4 level  approval process.
    Information:
    it is sequential release as I can see in workflow log, a new workflow gets generated for next level only after previous level executes the workitem.
    Facing following issue at 2nd Level :
    Level 2 releases item and it goes to Level 3, but workitem doesn’t disappear from inbox.Once Level 3 releases item, an acceptance mail goes to Level 2. But along with the mail, updated workitem (i.e. showing release by 3rd level) also appears in inbox of Level2. Now two work items appear in Level2 Inbox.
    In Workflow Log, this is how its behaving:
    WORKFLOW STARTED-->
    1st WF appears in WF log.
    Level 1 releases WI ->
    2nd workflow appears in WF log +
    1st workflow with (in process status)
    Level 2 releases WI ->
    3rd WF appears +
    2nd workflow with (in process status) +
    1st workflow with (in process status)
    Level 3 releases WI ->
    3rd WF appears +
    2nd workflow with (in process status) +
    1st workflow with (in process status)
    ISSUE: As soon as Level 3 sends back acceptance to Level 2, updated WI item appears( i.e. with latest release status which in this case is: released by level1, Level2 and Level3) along with the mail.
    Level 4 releases WI ->
    4th WF appears +
    3rd WF appears (in process status) +
    2nd workflow with (in process status) +
    1st workflow with (STATUS COMPLETED)
    ISSUE: As soon as Level 4 sends back acceptance to Level 2, updated WI item appears( i.e. with latest release status which in this case is: released by level1, Level2, Level3 and Level 4) along with the mail.
    Result:
    PO gets released.
    In workflow log 2nd, 3rd and 4th workflow appear with IN PROCESS STATUS. All of them show process stopped at LEVEL2.

    Hi Kjetil,
    Release strategy is being used. Configuration for release strategy is given as following.
    RGroup Rcode   Workflow     Agent
    Z6          R1         1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Release is sequential.
    For column 'Agent' mentioning position or User is not really useful because we are getting agents through Z table. Reason is: current org structure supports 1 position with multiple users from same department. In our scenario we need to find initiators department then find relevant approval levels for that departemnt. So I cannot mention any position in 'Agent' Column as release code will be locked against one position and one departetment.
    Agents picked through Z table. Table has fields  Agent/ UserID , level, department.
    Logic to pick agents( Object and method created ): 
      When workflow starts, it finds department of the initiator.
      For that department-> find approval levels available(L1, L2,  L3).
      For these levels -> Find Agent mentioned for that level.
      Onece Agents are found for all levels -> Pass them to WF  container.
      In task activity, These agents are passed back to the rule and  the task comes to know which agent it should go to.
    Result : Four workflows start in sequence. When last level releases, only 1st workflow shows COMPLETED status. Rest three hang at level 2. If I see Me29N , release for that item is shown completed. To me it seems triggering of only first workflow is enough for release. Is there any way I can avoid trigerring of other three workflows?
    Edited by: User112 User112 on Jan 25, 2008 6:30 AM
    Edited by: User112 User112 on Jan 25, 2008 6:31 AM

Maybe you are looking for