Standard YES/NO Messache Choice

Hi All
I have a requiremnt to add Yes/No message choice in custom page.
Do We have a standard Message choice region (YES/NO) Region .
naveen

Please refer OAF Dev. guide

Similar Messages

  • Talent Assessment - 4 point and yes/no scale

    Hi All,
    We are implementing Talent Assessment on EHP4 and facing a problem with scales.
    We have a 4 point customer scale for Competency Assessment and have set up all the necessary configuration. However on the assessment form the threshold slider does not appear.
    We are exeprincing the same problem on Derailers where we are uisng a yes/no scale. We initially created a customer scale but also used the standard yes/no scale however the Threshold slider still does not appear.
    We have seen in table V_T77TMC_SCA_MAP that the 'Type' has 3 point, 5 point etc. Please can anyone tell us if a 4 point scale can be used and also maybe why the yes/no scale is not working.
    Thanks

    Hi
    Is there any specific reason SAP does not allow for a 4 point scale?
    The Yes/No scale is listed in the scales assigment table  with type Yes/No. In fact we even used the standard Yes/No scale and the threshold bar still does not appear.
    Thanks for all the input Luke & Hong
    Regards
    Imraan

  • Printing MY choice of pages

    Prior to 10.6.8 for all 3 of my printers I could chose what page numbers to print.
    Often used this on documents with hundreds of pages, to print only sections I needed.
    NOW, in 10.6.8 that functionability is NOT shown, nor available in print... about the only choice is which printer and everyone is 'standard'
    I tried 'select' and selected pages 4-6 and it still printed all 6 pages.
    IS THERE ANY SOLUTION IN SL??
    HELP
    Updating printer drivers made no difference

    no picture or whatever in your post.
    but to answer the question, pressing command P brings up this window
    top line is one of 3 printers
    bottom line is Standard or Last used settings
    Previously there were other selection areas including copies and pages (from to)
    and Presets was not only limited to standard but 5 other choices and a 3rd selection with 9 choices like paper quality, etc.

  • Dialog boxes: Road Map navigation buttons into the standard button area

    Hi All,
    I have a Road Map form which is opened in a dialog box being displayed in a portal.  Is there a way to get the "next/previous" buttons to display in the wave line area of the dialog box? 
    I know that i can put standard Yes, No and Cancel buttons in there, but how about custom user defined buttons?
    Cheers,
    Vic

    Hi,
    When you use these popups you can have only the standard buttons not the custom ones.
    To have the custom ones, then you need to create a view and have the layout with your own buttons then
    embed this view in other window inaddition to the existing window.
    I mean have to views one in each window.
    Call the 2nd window in 1st window as a popup. So that you can have you own buttons in that view that is embeded in 2nd window.
    This way you can do.
    Regards,
    Lekha.

  • Filtering Interactive Report which has combo box

    Hi,
    I am a rookie in apex.I have an interactive report in which I have a column which contain's only combo box's. Let me say for example that the display values are Yes and No and the return values are Y and N and the name of the column as "required". When I try to filter the report, I can do so for all the other column's but when I try to do so for this column, I get two combo box's when I click on the expression filter instead of the Yes or No choices. I want the choices to appear in the filter for 'required' column instead of the combo box's. How can I do this? ...I have been searching google in vain...Thanks in advance
    Edited by: user13073434 on May 3, 2010 8:27 PM

    Do I have to recompile this .rdf on the UNIX box again? No.
    How to go about this problem?Have a look at the following notes:
    Note: 337302.1 - Error REP-0756 Unable to find PL/SQL library 'inv.pll' when Opening Report POXPRPOP in Reports Builder
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=337302.1
    Note: 1015074.1 - REP-756,REP-735,REP-736 OPENING REPORT WITH FILESYSTEM ATTACHED LIBRARY
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1015074.1
    Note: 1016542.6 - Getting REP-0756 : Unable to Find PLsql when Running Standard Reports
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1016542.6

  • 3g | 8gb | uk - Vibration stopped working

    Hello all.
    first i shall give my details of the phone:
    iPhone 8gb > 3G > on O2 (UK) i bought it in late september. its is as factory so not jailbroke, only addition is a few apps from itunes from factory and some custom ringtones i made.
    recently at work i have been putting my phone onto silent via the rocker switch as it's not a good look to have a song blaring out when dealing with the public on duty.
    anyways, the vibrate feature has broken, it worked, im sure before the latest update, i had totally forgot about it not working until a few days back when i had a heap of SMS messages and voice mails and missed calls, all cause it didn't vibrate.
    it seems a little strange how it works one moment not the next.
    before we suggest settings and buttons, every thing is set so it should vibe on silent mode as well as standard.
    i even tried a reset of settings (not erasing data) and restarting via the home and power buttons. all to no remedy.
    can anyone help?
    Message was edited by: maka_uk
    many thanks!

    Ur contacts are saved to your Address Book whenever you sync ur iPhone with iTunes... so yes, u could get them back...
    I see in ur last post that u mention that after the resets, the phone still doesn't vibrate, I'm afraid it's a hardware issue and yes ur only choice is to take it to be checked and possibly replaced.
    Once u get ur iPhone repaired or replaced, plug it and sync with iTunes and u'll get all ur contacts back...
    Cheers.

  • Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings...never did really. Also JAVA now refuses to create updates for WinXP/FireFox.

    I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
    I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
    This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
    There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
    " seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
    Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
    Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
    Group Location
    Network Advertising Initiative United States
    Digital Advertising Alliance (DAA) United States
    European Digital Advertising Alliance Europe
    Digital Advertising Alliance of Canada Canada
    ....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
    ...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
    ...I clicked PROTECT MY CHOICES and downloaded the app.
    These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
    I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
    Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
    NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
    MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
    This has been going on forever for me - I've been reporting this malfunction since 2013.
    Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
    Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
    We can no longer just "DELETE ALL COOKIES".
    PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
    Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
    REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
    In summary:
    1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
    2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
    3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
    4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
    5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
    Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
    Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
    Thanks so much!

    hello, palemoon's support forums are here: http://forum.palemoon.org/

  • Need Help build my ati custom kernel

    Hello.
    I have been trying to build a custom kernel based on kernel2612-cko2-swsusp2 but modified:
    -2.6.10 version for better compatibility with Ati drivers
    -without swsusp2
    -without cdburning.patch
    Here are PKGBUILD:
    # Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
    pkgname=kernel2610-cko2-ati
    pkgver=2.6.10
    pkgrel=1
    pkgdesc="The Linux Kernel 2.6.10 and modules (IDE support) with -cko2 patchset and ati support"
    url="http://www.kernel.org"
    backup=('boot/kconfig26')
    depends=('module-init-tools')
    install=kernel26.install
    source=(http://kem.p.lodz.pl/~peter/cko/rel/patch-2.6.10-cko2.bz2 ftp://ftp.kernel.org/pub/linux/kernel/v … er.tar.bz2 config)
    build() {
      cd $startdir/src/linux-$pkgver
      patch -Np1 -i ../patch-2.6.10-cko2 || return 1
      # get rid of the 'i' in i686
      carch=`echo $CARCH | sed 's|i||'`
      cat ../config | sed "s|#CARCH#|$carch|g" >./.config
      # build the full kernel version to use in pathnames
      . ./.config
      _kernsuffix="-cko2${CONFIG_LOCALVERSION}"
      _kernver="${pkgver}${_kernsuffix}"
      # load configuration
      yes "" | make config
      # build!
      make clean bzImage modules || return 1
      mkdir -p $startdir/pkg/{lib/modules,boot}
      make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
      cp System.map $startdir/pkg/boot/System.map2612${_kernsuffix}
      cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz2612${_kernsuffix}
      install -D -m644 Makefile
        $startdir/pkg/usr/src/linux-${_kernver}/Makefile
      install -D -m644 .config
        $startdir/pkg/usr/src/linux-${_kernver}/.config
      install -D -m644 .config $startdir/pkg/boot/kconfig2612${_kernsuffix}
      mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/include
      mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/arch/i386/kernel
      for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
        cp -a include/$i $startdir/pkg/usr/src/linux-${_kernver}/include/
      done
      # copy files necessary for later builds, like nvidia and vmware
      cp Module.symvers $startdir/pkg/usr/src/linux-${_kernver}
      cp -a scripts $startdir/pkg/usr/src/linux-${_kernver}
      mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/.tmp_versions
      cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernver}/arch/i386/
      cp arch/i386/kernel/asm-offsets.s
        $startdir/pkg/usr/src/linux-${_kernver}/arch/i386/kernel/
      # copy in Kconfig files
      for i in `find . -name "Kconfig*"`; do
        mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
        cp $i $startdir/pkg/usr/src/linux-${_kernver}/$i
      done
      cd $startdir/pkg/usr/src/linux-${_kernver}/include && ln -s asm-i386 asm
      chown -R root.root $startdir/pkg/usr/src/linux-${_kernver}
      cd $startdir/pkg/lib/modules/${_kernver} &&
        (rm -f source build; ln -sf /usr/src/linux-${_kernver} build)
    md5sums=('a1e4a2337efb657d48dc3861e8bd40b6' 'cffcd2919d9c8ef793ce1ac07a440eda'
             '8c9bfd3774ee0bce71984623420a828d')
    and the config:
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.12-cko2
    # Sun Jul  3 21:21:40 2005
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    # Code maturity level options
    CONFIG_EXPERIMENTAL=y
    # CONFIG_CLEAN_COMPILE is not set
    CONFIG_BROKEN=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    # General setup
    CONFIG_LOCALVERSION="-swsusp2"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_CPUSETS is not set
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_CC_ALIGN_FUNCTIONS=0
    CONFIG_CC_ALIGN_LABELS=0
    CONFIG_CC_ALIGN_LOOPS=0
    CONFIG_CC_ALIGN_JUMPS=0
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    # Loadable module support
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    CONFIG_MODVERSIONS=y
    CONFIG_MODULE_SRCVERSION_ALL=y
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    # Processor type and features
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    CONFIG_M686=y
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    CONFIG_X86_GENERIC=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_PPRO_FENCE=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_HPET_TIMER=y
    CONFIG_SMP=y
    CONFIG_NR_CPUS=4
    CONFIG_MAX_IO_APICS=8
    CONFIG_SCHED_SMT=y
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=m
    CONFIG_X86_MCE_P4THERMAL=y
    CONFIG_TOSHIBA=m
    CONFIG_I8K=m
    CONFIG_X86_REBOOTFIXUPS=y
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set
    # Firmware Drivers
    # CONFIG_EDD is not set
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_HIGHMEM=y
    CONFIG_PROC_MM=y
    # CONFIG_PROC_MM_DUMPABLE is not set
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_IRQBALANCE=y
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set
    CONFIG_SECCOMP=y
    CONFIG_HZ_1000=y
    # CONFIG_HZ_500 is not set
    # CONFIG_HZ_250 is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ=1000
    # Power management options (ACPI, APM)
    CONFIG_PM=y
    # CONFIG_PM_DEBUG is not set
    CONFIG_SOFTWARE_SUSPEND=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_SUSPEND2=y
    # Image Storage (you need at least one writer)
    # CONFIG_SUSPEND2_FILEWRITER is not set
    CONFIG_SUSPEND2_SWAPWRITER=y
    # Page Transformers? We now use Cryptoapi.
    # User Interface Options
    CONFIG_SUSPEND2_USERSPACE_UI=y
    CONFIG_SUSPEND2_TEXT_MODE=y
    # General Options
    CONFIG_SUSPEND2_DEFAULT_RESUME2=""
    # CONFIG_SUSPEND2_KEEP_IMAGE is not set
    CONFIG_SUSPEND2_CHECK_RESUME_SAFE=y
    # ACPI (Advanced Configuration and Power Interface) Support
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    CONFIG_ACPI_ASUS=m
    CONFIG_ACPI_IBM=m
    CONFIG_ACPI_TOSHIBA=m
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m
    # APM (Advanced Power Management) BIOS Support
    CONFIG_APM=y
    # CONFIG_APM_IGNORE_USER_SUSPEND is not set
    CONFIG_APM_DO_ENABLE=y
    # CONFIG_APM_CPU_IDLE is not set
    # CONFIG_APM_DISPLAY_BLANK is not set
    # CONFIG_APM_RTC_IS_GMT is not set
    # CONFIG_APM_ALLOW_INTS is not set
    # CONFIG_APM_REAL_MODE_POWER_OFF is not set
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=m
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=m
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
    # CPUFreq processor drivers
    CONFIG_X86_ACPI_CPUFREQ=m
    CONFIG_X86_POWERNOW_K6=m
    CONFIG_X86_POWERNOW_K7=m
    CONFIG_X86_POWERNOW_K7_ACPI=y
    CONFIG_X86_POWERNOW_K8=m
    CONFIG_X86_POWERNOW_K8_ACPI=y
    CONFIG_X86_GX_SUSPMOD=m
    CONFIG_X86_SPEEDSTEP_CENTRINO=m
    CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
    CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
    CONFIG_X86_SPEEDSTEP_ICH=m
    CONFIG_X86_SPEEDSTEP_SMI=m
    CONFIG_X86_P4_CLOCKMOD=m
    CONFIG_X86_CPUFREQ_NFORCE2=m
    CONFIG_X86_LONGRUN=m
    CONFIG_X86_LONGHAUL=m
    # shared options
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_HOTPLUG_PCI_PCIE=m
    # CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
    # CONFIG_PCI_MSI is not set
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    # PCCARD (PCMCIA/CardBus) support
    CONFIG_PCCARD=m
    # CONFIG_PCMCIA_DEBUG is not set
    CONFIG_PCMCIA=m
    CONFIG_CARDBUS=y
    # PC-card bridges
    CONFIG_YENTA=m
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_I82365=m
    CONFIG_TCIC=m
    CONFIG_PCMCIA_PROBE=y
    CONFIG_PCCARD_NONSTATIC=m
    # PCI Hotplug Support
    CONFIG_HOTPLUG_PCI=m
    CONFIG_HOTPLUG_PCI_FAKE=m
    CONFIG_HOTPLUG_PCI_COMPAQ=m
    # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
    CONFIG_HOTPLUG_PCI_IBM=m
    CONFIG_HOTPLUG_PCI_ACPI=m
    CONFIG_HOTPLUG_PCI_ACPI_IBM=m
    CONFIG_HOTPLUG_PCI_CPCI=y
    CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
    CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
    CONFIG_HOTPLUG_PCI_SHPC=m
    # CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
    # Executable file formats
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y
    # Device Drivers
    # Generic Driver Options
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # CONFIG_DEBUG_DRIVER is not set
    # Memory Technology Devices (MTD)
    # CONFIG_MTD is not set
    # Parallel port support
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_SERIAL=m
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    CONFIG_PARPORT_PC_PCMCIA=m
    CONFIG_PARPORT_NOT_PC=y
    # CONFIG_PARPORT_GSC is not set
    CONFIG_PARPORT_1284=y
    # Plug and Play support
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set
    # Protocols
    CONFIG_ISAPNP=y
    CONFIG_PNPBIOS=y
    CONFIG_PNPBIOS_PROC_FS=y
    CONFIG_PNPACPI=y
    # Block devices
    CONFIG_BLK_DEV_FD=y
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_PARIDE is not set
    CONFIG_BLK_CPQ_DA=m
    CONFIG_BLK_CPQ_CISS_DA=m
    # CONFIG_CISS_SCSI_TAPE is not set
    CONFIG_BLK_DEV_DAC960=m
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    CONFIG_BLK_DEV_CRYPTOLOOP=y
    CONFIG_BLK_DEV_NBD=m
    CONFIG_BLK_DEV_SX8=m
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=4096
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_LBD is not set
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_ATA_OVER_ETH=m
    # ATA/ATAPI/MFM/RLL support
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y
    # Please see Documentation/ide.txt for help/info on IDE drives
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECS=m
    CONFIG_BLK_DEV_IDECD=y
    CONFIG_BLK_DEV_IDETAPE=m
    CONFIG_BLK_DEV_IDEFLOPPY=m
    CONFIG_BLK_DEV_IDESCSI=m
    # CONFIG_IDE_TASK_IOCTL is not set
    # IDE chipset support/bugfixes
    CONFIG_IDE_GENERIC=y
    CONFIG_BLK_DEV_CMD640=y
    CONFIG_BLK_DEV_CMD640_ENHANCED=y
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    CONFIG_BLK_DEV_RZ1000=y
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    CONFIG_BLK_DEV_AEC62XX=y
    CONFIG_BLK_DEV_ALI15X3=y
    # CONFIG_WDC_ALI15X3 is not set
    CONFIG_BLK_DEV_AMD74XX=y
    CONFIG_BLK_DEV_ATIIXP=y
    CONFIG_BLK_DEV_CMD64X=y
    CONFIG_BLK_DEV_TRIFLEX=y
    CONFIG_BLK_DEV_CY82C693=y
    # CONFIG_BLK_DEV_CS5520 is not set
    CONFIG_BLK_DEV_CS5530=y
    CONFIG_BLK_DEV_HPT34X=y
    # CONFIG_HPT34X_AUTODMA is not set
    CONFIG_BLK_DEV_HPT366=y
    CONFIG_BLK_DEV_SC1200=y
    CONFIG_BLK_DEV_PIIX=y
    CONFIG_BLK_DEV_NS87415=y
    CONFIG_BLK_DEV_PDC202XX_OLD=y
    CONFIG_PDC202XX_BURST=y
    CONFIG_BLK_DEV_PDC202XX_NEW=y
    CONFIG_PDC202XX_FORCE=y
    CONFIG_BLK_DEV_SVWKS=y
    CONFIG_BLK_DEV_SIIMAGE=y
    CONFIG_BLK_DEV_SIS5513=y
    CONFIG_BLK_DEV_SLC90E66=y
    CONFIG_BLK_DEV_TRM290=y
    CONFIG_BLK_DEV_VIA82CXXX=y
    # CONFIG_IDE_ARM is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set
    # SCSI device support
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    CONFIG_CHR_DEV_ST=m
    CONFIG_CHR_DEV_OSST=m
    CONFIG_BLK_DEV_SR=m
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m
    # CONFIG_CHR_DEV_SCH is not set
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    CONFIG_SCSI_MULTI_LUN=y
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # SCSI Transport Attributes
    CONFIG_SCSI_SPI_ATTRS=m
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # SCSI low-level drivers
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    CONFIG_SCSI_AHA152X=m
    CONFIG_SCSI_AHA1542=m
    # CONFIG_SCSI_AACRAID is not set
    CONFIG_SCSI_AIC7XXX=m
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    CONFIG_AIC7XXX_DEBUG_ENABLE=y
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    CONFIG_SCSI_AIC79XX=m
    CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    CONFIG_AIC79XX_RESET_DELAY_MS=15000
    # CONFIG_AIC79XX_ENABLE_RD_STRM is not set
    CONFIG_AIC79XX_DEBUG_ENABLE=y
    CONFIG_AIC79XX_DEBUG_MASK=0
    CONFIG_AIC79XX_REG_PRETTY_PRINT=y
    # CONFIG_SCSI_DPT_I2O is not set
    CONFIG_SCSI_ADVANSYS=m
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    CONFIG_SCSI_SATA=y
    CONFIG_SCSI_SATA_AHCI=y
    CONFIG_SCSI_SATA_SVW=y
    CONFIG_SCSI_ATA_PIIX=y
    CONFIG_SCSI_SATA_NV=y
    CONFIG_SCSI_SATA_PROMISE=y
    CONFIG_SCSI_SATA_QSTOR=y
    CONFIG_SCSI_SATA_SX4=y
    CONFIG_SCSI_SATA_SIL=y
    CONFIG_SCSI_SATA_SIS=y
    CONFIG_SCSI_SATA_ULI=y
    CONFIG_SCSI_SATA_VIA=y
    CONFIG_SCSI_SATA_VITESSE=y
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_CPQFCTS is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PCI2000 is not set
    # CONFIG_SCSI_PCI2220I is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=y
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_SEAGATE is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set
    # PCMCIA SCSI adapter support
    CONFIG_PCMCIA_AHA152X=m
    CONFIG_PCMCIA_FDOMAIN=m
    CONFIG_PCMCIA_NINJA_SCSI=m
    CONFIG_PCMCIA_QLOGIC=m
    CONFIG_PCMCIA_SYM53C500=m
    # Old CD-ROM drivers (not SCSI, not IDE)
    # CONFIG_CD_NO_IDESCSI is not set
    # Multi-device support (RAID and LVM)
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_LINEAR=y
    CONFIG_MD_RAID0=y
    CONFIG_MD_RAID1=y
    CONFIG_MD_RAID10=y
    CONFIG_MD_RAID5=y
    CONFIG_MD_RAID6=y
    CONFIG_MD_MULTIPATH=y
    # CONFIG_MD_FAULTY is not set
    CONFIG_BLK_DEV_DM=y
    CONFIG_DM_CRYPT=y
    CONFIG_DM_SNAPSHOT=y
    CONFIG_DM_MIRROR=y
    CONFIG_DM_ZERO=y
    # CONFIG_DM_MULTIPATH is not set
    # Fusion MPT device support
    # CONFIG_FUSION is not set
    # IEEE 1394 (FireWire) support
    CONFIG_IEEE1394=m
    # Subsystem Options
    # CONFIG_IEEE1394_VERBOSEDEBUG is not set
    # CONFIG_IEEE1394_OUI_DB is not set
    CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
    CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
    # Device Drivers
    CONFIG_IEEE1394_PCILYNX=m
    CONFIG_IEEE1394_OHCI1394=m
    # Protocol Drivers
    CONFIG_IEEE1394_VIDEO1394=m
    CONFIG_IEEE1394_SBP2=m
    # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
    CONFIG_IEEE1394_ETH1394=m
    CONFIG_IEEE1394_DV1394=m
    CONFIG_IEEE1394_RAWIO=m
    CONFIG_IEEE1394_CMP=m
    CONFIG_IEEE1394_AMDTP=m
    # I2O device support
    CONFIG_I2O=m
    CONFIG_I2O_CONFIG=m
    CONFIG_I2O_BLOCK=m
    CONFIG_I2O_SCSI=m
    CONFIG_I2O_PROC=m
    # Networking support
    CONFIG_NET=y
    # Networking options
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    CONFIG_NET_KEY=m
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE=m
    # CONFIG_NET_IPGRE_BROADCAST is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_TUNNEL=m
    CONFIG_IP_TCPDIAG=y
    CONFIG_IP_TCPDIAG_IPV6=y
    # IP: Virtual Server Configuration
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12
    # IPVS transport protocol load balancing support
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y
    # IPVS scheduler
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m
    # IPVS application helper
    CONFIG_IP_VS_FTP=m
    CONFIG_IPV6=y
    CONFIG_IPV6_PRIVACY=y
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    CONFIG_INET6_TUNNEL=m
    CONFIG_IPV6_TUNNEL=m
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_BRIDGE_NETFILTER=y
    # IP: Netfilter Configuration
    CONFIG_IP_NF_CONNTRACK=m
    # CONFIG_IP_NF_CT_ACCT is not set
    # CONFIG_IP_NF_CONNTRACK_MARK is not set
    # CONFIG_IP_NF_CT_PROTO_SCTP is not set
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    CONFIG_IP_NF_TFTP=m
    CONFIG_IP_NF_AMANDA=m
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_LIMIT=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_MAC=m
    CONFIG_IP_NF_MATCH_PKTTYPE=m
    CONFIG_IP_NF_MATCH_MARK=m
    CONFIG_IP_NF_MATCH_MULTIPORT=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_DSCP=m
    CONFIG_IP_NF_MATCH_AH_ESP=m
    CONFIG_IP_NF_MATCH_LENGTH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_TCPMSS=m
    CONFIG_IP_NF_MATCH_HELPER=m
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_MATCH_PHYSDEV=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_MATCH_REALM=m
    CONFIG_IP_NF_MATCH_SCTP=m
    CONFIG_IP_NF_MATCH_COMMENT=m
    # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_IP_NF_TARGET_TCPMSS=m
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_SAME=m
    CONFIG_IP_NF_NAT_SNMP_BASIC=m
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_NAT_TFTP=m
    CONFIG_IP_NF_NAT_AMANDA=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_DSCP=m
    CONFIG_IP_NF_TARGET_MARK=m
    CONFIG_IP_NF_TARGET_CLASSIFY=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_TARGET_NOTRACK=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # IPv6: Netfilter Configuration (EXPERIMENTAL)
    CONFIG_IP6_NF_QUEUE=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_LIMIT=m
    CONFIG_IP6_NF_MATCH_MAC=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_MULTIPORT=m
    CONFIG_IP6_NF_MATCH_OWNER=m
    CONFIG_IP6_NF_MATCH_MARK=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_AHESP=m
    CONFIG_IP6_NF_MATCH_LENGTH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_MATCH_PHYSDEV=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_LOG=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_TARGET_MARK=m
    CONFIG_IP6_NF_RAW=m
    # Bridge: Netfilter Configuration
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    # CONFIG_BRIDGE_EBT_ULOG is not set
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m
    # SCTP Configuration (EXPERIMENTAL)
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    CONFIG_SCTP_HMAC_SHA1=y
    # CONFIG_SCTP_HMAC_MD5 is not set
    CONFIG_ATM=m
    CONFIG_ATM_CLIP=m
    # CONFIG_ATM_CLIP_NO_ICMP is not set
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    # CONFIG_ATM_BR2684_IPFILTER is not set
    CONFIG_BRIDGE=m
    CONFIG_VLAN_8021Q=m
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    CONFIG_IPX=m
    # CONFIG_IPX_INTERN is not set
    CONFIG_ATALK=m
    # CONFIG_DEV_APPLETALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # QoS and/or fair queueing
    CONFIG_NET_SCHED=y
    CONFIG_NET_SCH_CLK_JIFFIES=y
    # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
    # CONFIG_NET_SCH_CLK_CPU is not set
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_ATM=m
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_INGRESS=m
    CONFIG_NET_QOS=y
    CONFIG_NET_ESTIMATOR=y
    CONFIG_NET_CLS=y
    # CONFIG_NET_CLS_BASIC is not set
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    # CONFIG_CLS_U32_PERF is not set
    # CONFIG_NET_CLS_IND is not set
    # CONFIG_CLS_U32_MARK is not set
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    # CONFIG_NET_EMATCH is not set
    # CONFIG_NET_CLS_ACT is not set
    CONFIG_NET_CLS_POLICE=y
    # Network testing
    CONFIG_NET_PKTGEN=m
    CONFIG_NETPOLL=y
    # CONFIG_NETPOLL_RX is not set
    # CONFIG_NETPOLL_TRAP is not set
    CONFIG_NET_POLL_CONTROLLER=y
    # CONFIG_HAMRADIO is not set
    CONFIG_IRDA=m
    # IrDA protocols
    CONFIG_IRLAN=m
    CONFIG_IRNET=m
    CONFIG_IRCOMM=m
    CONFIG_IRDA_ULTRA=y
    # IrDA options
    CONFIG_IRDA_CACHE_LAST_LSAP=y
    CONFIG_IRDA_FAST_RR=y
    # CONFIG_IRDA_DEBUG is not set
    # Infrared-port device drivers
    # SIR device drivers
    CONFIG_IRTTY_SIR=m
    # Dongle support
    CONFIG_DONGLE=y
    CONFIG_ESI_DONGLE=m
    CONFIG_ACTISYS_DONGLE=m
    CONFIG_TEKRAM_DONGLE=m
    CONFIG_LITELINK_DONGLE=m
    CONFIG_MA600_DONGLE=m
    CONFIG_GIRBIL_DONGLE=m
    CONFIG_MCP2120_DONGLE=m
    CONFIG_OLD_BELKIN_DONGLE=m
    CONFIG_ACT200L_DONGLE=m
    # Old SIR device drivers
    CONFIG_IRPORT_SIR=m
    # Old Serial dongle support
    CONFIG_DONGLE_OLD=y
    CONFIG_ESI_DONGLE_OLD=m
    CONFIG_ACTISYS_DONGLE_OLD=m
    CONFIG_TEKRAM_DONGLE_OLD=m
    CONFIG_GIRBIL_DONGLE_OLD=m
    CONFIG_LITELINK_DONGLE_OLD=m
    CONFIG_MCP2120_DONGLE_OLD=m
    CONFIG_OLD_BELKIN_DONGLE_OLD=m
    CONFIG_ACT200L_DONGLE_OLD=m
    CONFIG_MA600_DONGLE_OLD=m
    # FIR device drivers
    CONFIG_USB_IRDA=m
    CONFIG_SIGMATEL_FIR=m
    CONFIG_NSC_FIR=m
    CONFIG_WINBOND_FIR=m
    CONFIG_TOSHIBA_FIR=m
    CONFIG_SMC_IRCC_FIR=m
    CONFIG_ALI_FIR=m
    CONFIG_VLSI_FIR=m
    CONFIG_VIA_FIR=m
    CONFIG_BT=m
    CONFIG_BT_L2CAP=m
    CONFIG_BT_SCO=m
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    # CONFIG_BT_BNEP_MC_FILTER is not set
    # CONFIG_BT_BNEP_PROTO_FILTER is not set
    CONFIG_BT_CMTP=m
    CONFIG_BT_HIDP=m
    # Bluetooth device drivers
    CONFIG_BT_HCIUSB=m
    CONFIG_BT_HCIUSB_SCO=y
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_BCSP_TXCRC=y
    CONFIG_BT_HCIBCM203X=m
    # CONFIG_BT_HCIBPA10X is not set
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    CONFIG_BONDING=m
    CONFIG_EQUALIZER=m
    CONFIG_TUN=m
    # CONFIG_NET_SB1000 is not set
    # ARCnet devices
    # CONFIG_ARCNET is not set
    # Ethernet (10 or 100Mbit)
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    CONFIG_HAPPYMEAL=m
    CONFIG_SUNGEM=m
    CONFIG_NET_VENDOR_3COM=y
    CONFIG_EL1=m
    CONFIG_EL2=m
    CONFIG_ELPLUS=m
    CONFIG_EL16=m
    CONFIG_EL3=m
    CONFIG_3C515=m
    CONFIG_VORTEX=m
    CONFIG_TYPHOON=m
    CONFIG_LANCE=m
    CONFIG_NET_VENDOR_SMC=y
    CONFIG_WD80x3=m
    CONFIG_ULTRA=m
    CONFIG_SMC9194=m
    CONFIG_NET_VENDOR_RACAL=y
    CONFIG_NI5010=m
    CONFIG_NI52=m
    CONFIG_NI65=m
    # Tulip family network device support
    CONFIG_NET_TULIP=y
    CONFIG_DE2104X=m
    CONFIG_TULIP=m
    # CONFIG_TULIP_MWI is not set
    # CONFIG_TULIP_MMIO is not set
    # CONFIG_TULIP_NAPI is not set
    CONFIG_DE4X5=m
    CONFIG_WINBOND_840=m
    CONFIG_DM9102=m
    CONFIG_PCMCIA_XIRCOM=m
    # CONFIG_PCMCIA_XIRTULIP is not set
    CONFIG_AT1700=m
    CONFIG_DEPCA=m
    CONFIG_HP100=m
    CONFIG_NET_ISA=y
    CONFIG_E2100=m
    CONFIG_EWRK3=m
    CONFIG_EEXPRESS=m
    CONFIG_EEXPRESS_PRO=m
    CONFIG_HPLAN_PLUS=m
    CONFIG_HPLAN=m
    CONFIG_LP486E=m
    CONFIG_ETH16I=m
    CONFIG_NE2000=m
    CONFIG_ZNET=m
    CONFIG_SEEQ8005=m
    CONFIG_NET_PCI=y
    CONFIG_PCNET32=m
    CONFIG_AMD8111_ETH=m
    # CONFIG_AMD8111E_NAPI is not set
    CONFIG_ADAPTEC_STARFIRE=m
    # CONFIG_ADAPTEC_STARFIRE_NAPI is not set
    CONFIG_AC3200=m
    CONFIG_APRICOT=m
    CONFIG_B44=m
    CONFIG_FORCEDETH=m
    CONFIG_CS89x0=m
    CONFIG_DGRS=m
    CONFIG_EEPRO100=m
    CONFIG_E100=m
    CONFIG_FEALNX=m
    CONFIG_NATSEMI=m
    CONFIG_NE2K_PCI=m
    CONFIG_8139CP=m
    CONFIG_8139TOO=m
    # CONFIG_8139TOO_PIO is not set
    CONFIG_8139TOO_TUNE_TWISTER=y
    CONFIG_8139TOO_8129=y
    # CONFIG_8139_OLD_RX_RESET is not set
    CONFIG_SIS900=m
    CONFIG_EPIC100=m
    CONFIG_SUNDANCE=m
    # CONFIG_SUNDANCE_MMIO is not set
    CONFIG_TLAN=m
    CONFIG_VIA_RHINE=m
    # CONFIG_VIA_RHINE_MMIO is not set
    CONFIG_NET_POCKET=y
    CONFIG_ATP=m
    CONFIG_DE600=m
    CONFIG_DE620=m
    # Ethernet (1000 Mbit)
    CONFIG_ACENIC=m
    # CONFIG_ACENIC_OMIT_TIGON_I is not set
    CONFIG_DL2K=m
    CONFIG_E1000=m
    # CONFIG_E1000_NAPI is not set
    CONFIG_NS83820=m
    CONFIG_HAMACHI=m
    CONFIG_YELLOWFIN=m
    CONFIG_R8169=m
    # CONFIG_R8169_NAPI is not set
    # CONFIG_R8169_VLAN is not set
    CONFIG_SK98LIN=m
    CONFIG_VIA_VELOCITY=m
    CONFIG_TIGON3=m
    CONFIG_BNX2=m
    # Ethernet (10000 Mbit)
    CONFIG_IXGB=m
    # CONFIG_IXGB_NAPI is not set
    CONFIG_S2IO=m
    # CONFIG_S2IO_NAPI is not set
    # CONFIG_2BUFF_MODE is not set
    # Token Ring devices
    # CONFIG_TR is not set
    # Wireless LAN (non-hamradio)
    CONFIG_NET_RADIO=y
    # Obsolete Wireless cards support (pre-802.11)
    # CONFIG_STRIP is not set
    # CONFIG_ARLAN is not set
    # CONFIG_WAVELAN is not set
    # CONFIG_PCMCIA_WAVELAN is not set
    # CONFIG_PCMCIA_NETWAVE is not set
    # Wireless 802.11 Frequency Hopping cards support
    CONFIG_PCMCIA_RAYCS=m
    # Wireless 802.11b ISA/PCI cards support
    CONFIG_AIRO=m
    CONFIG_HERMES=m
    CONFIG_PLX_HERMES=m
    CONFIG_TMD_HERMES=m
    CONFIG_PCI_HERMES=m
    CONFIG_ATMEL=m
    CONFIG_PCI_ATMEL=m
    # Wireless 802.11b Pcmcia/Cardbus cards support
    CONFIG_PCMCIA_HERMES=m
    CONFIG_AIRO_CS=m
    CONFIG_PCMCIA_ATMEL=m
    CONFIG_PCMCIA_WL3501=m
    # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
    CONFIG_PRISM54=m
    CONFIG_NET_WIRELESS=y
    # PCMCIA network device support
    CONFIG_NET_PCMCIA=y
    CONFIG_PCMCIA_3C589=m
    CONFIG_PCMCIA_3C574=m
    CONFIG_PCMCIA_FMVJ18X=m
    CONFIG_PCMCIA_PCNET=m
    CONFIG_PCMCIA_NMCLAN=m
    CONFIG_PCMCIA_SMC91C92=m
    CONFIG_PCMCIA_XIRC2PS=m
    CONFIG_PCMCIA_AXNET=m
    # Wan interfaces
    # CONFIG_WAN is not set
    # ATM drivers
    CONFIG_ATM_TCP=m
    CONFIG_ATM_LANAI=m
    CONFIG_ATM_ENI=m
    # CONFIG_ATM_ENI_DEBUG is not set
    # CONFIG_ATM_ENI_TUNE_BURST is not set
    CONFIG_ATM_FIRESTREAM=m
    CONFIG_ATM_ZATM=m
    # CONFIG_ATM_ZATM_DEBUG is not set
    CONFIG_ATM_NICSTAR=m
    # CONFIG_ATM_NICSTAR_USE_SUNI is not set
    # CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
    CONFIG_ATM_IDT77252=m
    # CONFIG_ATM_IDT77252_DEBUG is not set
    # CONFIG_ATM_IDT77252_RCV_ALL is not set
    CONFIG_ATM_IDT77252_USE_SUNI=y
    CONFIG_ATM_AMBASSADOR=m
    # CONFIG_ATM_AMBASSADOR_DEBUG is not set
    CONFIG_ATM_HORIZON=m
    # CONFIG_ATM_HORIZON_DEBUG is not set
    CONFIG_ATM_IA=m
    # CONFIG_ATM_IA_DEBUG is not set
    CONFIG_ATM_FORE200E_MAYBE=m
    # CONFIG_ATM_FORE200E_PCA is not set
    CONFIG_ATM_HE=m
    # CONFIG_ATM_HE_USE_SUNI is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    CONFIG_PLIP=m
    CONFIG_PPP=m
    CONFIG_PPP_MULTILINK=y
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPPOE=m
    CONFIG_PPPOATM=m
    CONFIG_SLIP=m
    # CONFIG_SLIP_COMPRESSED is not set
    # CONFIG_SLIP_SMART is not set
    # CONFIG_SLIP_MODE_SLIP6 is not set
    # CONFIG_NET_FC is not set
    CONFIG_SHAPER=m
    CONFIG_NETCONSOLE=m
    # ISDN subsystem
    CONFIG_ISDN=m
    # Old ISDN4Linux
    CONFIG_ISDN_I4L=m
    CONFIG_ISDN_PPP=y
    # CONFIG_ISDN_PPP_VJ is not set
    # CONFIG_ISDN_MPP is not set
    # CONFIG_IPPP_FILTER is not set
    CONFIG_ISDN_PPP_BSDCOMP=m
    CONFIG_ISDN_AUDIO=y
    CONFIG_ISDN_TTY_FAX=y
    # ISDN feature submodules
    # CONFIG_ISDN_DRV_LOOP is not set
    # CONFIG_ISDN_DIVERSION is not set
    # ISDN4Linux hardware drivers
    # Passive cards
    CONFIG_ISDN_DRV_HISAX=m
    # D-channel protocol features
    CONFIG_HISAX_EURO=y
    CONFIG_DE_AOC=y
    # CONFIG_HISAX_NO_SENDCOMPLETE is not set
    # CONFIG_HISAX_NO_LLC is not set
    # CONFIG_HISAX_NO_KEYPAD is not set
    CONFIG_HISAX_1TR6=y
    CONFIG_HISAX_NI1=y
    CONFIG_HISAX_MAX_CARDS=8
    # HiSax supported cards
    CONFIG_HISAX_16_0=y
    CONFIG_HISAX_16_3=y
    CONFIG_HISAX_TELESPCI=y
    CONFIG_HISAX_S0BOX=y
    CONFIG_HISAX_AVM_A1=y
    CONFIG_HISAX_FRITZPCI=y
    CONFIG_HISAX_AVM_A1_PCMCIA=y
    CONFIG_HISAX_ELSA=y
    CONFIG_HISAX_IX1MICROR2=y
    CONFIG_HISAX_DIEHLDIVA=y
    CONFIG_HISAX_ASUSCOM=y
    CONFIG_HISAX_TELEINT=y
    CONFIG_HISAX_HFCS=y
    CONFIG_HISAX_SEDLBAUER=y
    CONFIG_HISAX_SPORTSTER=y
    CONFIG_HISAX_MIC=y
    CONFIG_HISAX_NETJET=y
    CONFIG_HISAX_NETJET_U=y
    CONFIG_HISAX_NICCY=y
    CONFIG_HISAX_ISURF=y
    CONFIG_HISAX_HSTSAPHIR=y
    CONFIG_HISAX_BKM_A4T=y
    CONFIG_HISAX_SCT_QUADRO=y
    CONFIG_HISAX_GAZEL=y
    CONFIG_HISAX_HFC_PCI=y
    CONFIG_HISAX_W6692=y
    CONFIG_HISAX_HFC_SX=y
    CONFIG_HISAX_ENTERNOW_PCI=y
    # CONFIG_HISAX_DEBUG is not set
    # HiSax PCMCIA card service modules
    CONFIG_HISAX_SEDLBAUER_CS=m
    CONFIG_HISAX_ELSA_CS=m
    CONFIG_HISAX_AVM_A1_CS=m
    CONFIG_HISAX_TELES_CS=m
    # HiSax sub driver modules
    CONFIG_HISAX_ST5481=m
    CONFIG_HISAX_HFCUSB=m
    # CONFIG_HISAX_HFC4S8S is not set
    CONFIG_HISAX_FRITZ_PCIPNP=m
    CONFIG_HISAX_HDLC=y
    # Active cards
    CONFIG_ISDN_DRV_ICN=m
    CONFIG_ISDN_DRV_PCBIT=m
    CONFIG_ISDN_DRV_SC=m
    CONFIG_ISDN_DRV_ACT2000=m
    CONFIG_HYSDN=m
    CONFIG_HYSDN_CAPI=y
    # CAPI subsystem
    CONFIG_ISDN_CAPI=m
    CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
    CONFIG_ISDN_CAPI_MIDDLEWARE=y
    CONFIG_ISDN_CAPI_CAPI20=m
    CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
    CONFIG_ISDN_CAPI_CAPIFS=m
    CONFIG_ISDN_CAPI_CAPIDRV=m
    # CAPI hardware drivers
    # Active AVM cards
    CONFIG_CAPI_AVM=y
    CONFIG_ISDN_DRV_AVMB1_B1ISA=m
    CONFIG_ISDN_DRV_AVMB1_B1PCI=m
    CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
    CONFIG_ISDN_DRV_AVMB1_T1ISA=m
    CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
    CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
    CONFIG_ISDN_DRV_AVMB1_T1PCI=m
    CONFIG_ISDN_DRV_AVMB1_C4=m
    # Active Eicon DIVA Server cards
    CONFIG_CAPI_EICON=y
    CONFIG_ISDN_DIVAS=m
    CONFIG_ISDN_DIVAS_BRIPCI=y
    CONFIG_ISDN_DIVAS_PRIPCI=y
    CONFIG_ISDN_DIVAS_DIVACAPI=m
    CONFIG_ISDN_DIVAS_USERIDI=m
    CONFIG_ISDN_DIVAS_MAINT=m
    # Telephony Support
    # CONFIG_PHONE is not set
    # Input device support
    CONFIG_INPUT=y
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m
    CONFIG_INPUT_TSDEV=m
    CONFIG_INPUT_TSDEV_SCREEN_X=240
    CONFIG_INPUT_TSDEV_SCREEN_Y=320
    CONFIG_INPUT_EVDEV=m
    # CONFIG_INPUT_EVBUG is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_ANALOG=m
    CONFIG_JOYSTICK_A3D=m
    CONFIG_JOYSTICK_ADI=m
    CONFIG_JOYSTICK_COBRA=m
    CONFIG_JOYSTICK_GF2K=m
    CONFIG_JOYSTICK_GRIP=m
    CONFIG_JOYSTICK_GRIP_MP=m
    CONFIG_JOYSTICK_GUILLEMOT=m
    CONFIG_JOYSTICK_INTERACT=m
    CONFIG_JOYSTICK_SIDEWINDER=m
    CONFIG_JOYSTICK_TMDC=m
    CONFIG_JOYSTICK_IFORCE=m
    CONFIG_JOYSTICK_IFORCE_USB=y
    CONFIG_JOYSTICK_IFORCE_232=y
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_JOYSTICK_MAGELLAN=m
    CONFIG_JOYSTICK_SPACEORB=m
    CONFIG_JOYSTICK_SPACEBALL=m
    CONFIG_JOYSTICK_STINGER=m
    CONFIG_JOYSTICK_TWIDJOY=m
    CONFIG_JOYSTICK_DB9=m
    CONFIG_JOYSTICK_GAMECON=m
    CONFIG_JOYSTICK_TURBOGRAFX=m
    # CONFIG_JOYSTICK_JOYDUMP is not set
    CONFIG_INPUT_TOUCHSCREEN=y
    CONFIG_TOUCHSCREEN_GUNZE=m
    CONFIG_TOUCHSCREEN_ELO=m
    CONFIG_TOUCHSCREEN_MTOUCH=m
    CONFIG_TOUCHSCREEN_MK712=m
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    CONFIG_INPUT_UINPUT=m
    # Hardware I/O ports
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PARKBD=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    CONFIG_GAMEPORT=m
    CONFIG_GAMEPORT_NS558=m
    CONFIG_GAMEPORT_L4=m
    CONFIG_GAMEPORT_EMU10K1=m
    CONFIG_GAMEPORT_VORTEX=m
    CONFIG_GAMEPORT_FM801=m
    CONFIG_GAMEPORT_CS461X=m
    # Character devices
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    CONFIG_SERIAL_NONSTANDARD=y
    # CONFIG_COMPUTONE is not set
    CONFIG_ROCKETPORT=m
    CONFIG_CYCLADES=m
    # CONFIG_CYZ_INTR is not set
    # CONFIG_DIGIEPCA is not set
    # CONFIG_ESPSERIAL is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    # CONFIG_ISI is not set
    CONFIG_SYNCLINK=m
    CONFIG_SYNCLINKMP=m
    CONFIG_N_HDLC=m
    # CONFIG_RISCOM8 is not set
    # CONFIG_SPECIALIX is not set
    # CONFIG_SX is not set
    # CONFIG_RIO is not set
    # CONFIG_STALDRV is not set
    # Serial drivers
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_CS=m
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    # Non-8250 serial port support
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=m
    # CONFIG_TIPAR is not set
    # IPMI
    CONFIG_IPMI_HANDLER=m
    # CONFIG_IPMI_PANIC_EVENT is not set
    CONFIG_IPMI_DEVICE_INTERFACE=m
    CONFIG_IPMI_SI=m
    CONFIG_IPMI_WATCHDOG=m
    CONFIG_IPMI_POWEROFF=m
    # Watchdog Cards
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=m
    CONFIG_NVRAM=m
    CONFIG_RTC=m
    CONFIG_GEN_RTC=m
    # CONFIG_GEN_RTC_X is not set
    CONFIG_DTLK=m
    CONFIG_R3964=m
    CONFIG_APPLICOM=m
    CONFIG_SONYPI=m
    # Ftape, the floppy tape device driver
    # CONFIG_FTAPE is not set
    CONFIG_AGP=m
    CONFIG_AGP_ALI=m
    CONFIG_AGP_ATI=m
    CONFIG_AGP_AMD=m
    CONFIG_AGP_AMD64=m
    CONFIG_AGP_INTEL=m
    CONFIG_AGP_NVIDIA=m
    CONFIG_AGP_SIS=m
    CONFIG_AGP_SWORKS=m
    CONFIG_AGP_VIA=m
    CONFIG_AGP_EFFICEON=m
    CONFIG_DRM=m
    CONFIG_DRM_TDFX=m
    # CONFIG_DRM_GAMMA is not set
    CONFIG_DRM_R128=m
    CONFIG_DRM_RADEON=m
    CONFIG_DRM_I810=m
    CONFIG_DRM_I830=m
    CONFIG_DRM_I915=m
    CONFIG_DRM_MGA=m
    CONFIG_DRM_SIS=m
    # PCMCIA character devices
    CONFIG_SYNCLINK_CS=m
    CONFIG_MWAVE=m
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    CONFIG_HANGCHECK_TIMER=m
    # TPM devices
    CONFIG_TCG_TPM=m
    CONFIG_TCG_NSC=m
    CONFIG_TCG_ATMEL=m
    # Linux InfraRed Controller
    # CONFIG_LIRC_SUPPORT is not set
    # I2C support
    CONFIG_I2C=m
    CONFIG_I2C_CHARDEV=m
    # I2C Algorithms
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_ALGOPCF=m
    CONFIG_I2C_ALGOPCA=m
    # I2C Hardware Bus support
    CONFIG_I2C_ALI1535=m
    CONFIG_I2C_ALI1563=m
    CONFIG_I2C_ALI15X3=m
    CONFIG_I2C_AMD756=m
    CONFIG_I2C_AMD756_S4882=m
    CONFIG_I2C_AMD8111=m
    # CONFIG_I2C_ELEKTOR is not set
    CONFIG_I2C_I801=m
    CONFIG_I2C_I810=m
    CONFIG_I2C_PIIX4=m
    CONFIG_I2C_ISA=m
    CONFIG_I2C_NFORCE2=m
    CONFIG_I2C_PARPORT=m
    CONFIG_I2C_PARPORT_LIGHT=m
    CONFIG_I2C_PROSAVAGE=m
    CONFIG_I2C_SAVAGE4=m
    CONFIG_SCx200_ACB=m
    CONFIG_I2C_SIS5595=m
    CONFIG_I2C_SIS630=m
    CONFIG_I2C_SIS96X=m
    # CONFIG_I2C_STUB is not set
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m
    CONFIG_I2C_VOODOO3=m
    CONFIG_I2C_PCA_ISA=m
    # Hardware Sensors Chip support
    CONFIG_I2C_SENSOR=m
    CONFIG_SENSORS_ADM1021=m
    CONFIG_SENSORS_ADM1025=m
    CONFIG_SENSORS_ADM1026=m
    CONFIG_SENSORS_ADM1031=m
    CONFIG_SENSORS_ASB100=m
    CONFIG_SENSORS_DS1621=m
    CONFIG_SENSORS_FSCHER=m
    CONFIG_SENSORS_FSCPOS=m
    CONFIG_SENSORS_GL518SM=m
    CONFIG_SENSORS_GL520SM=m
    CONFIG_SENSORS_IT87=m
    CONFIG_SENSORS_LM63=m
    CONFIG_SENSORS_LM75=m
    CONFIG_SENSORS_LM77=m
    CONFIG_SENSORS_LM78=m
    CONFIG_SENSORS_LM80=m
    CONFIG_SENSORS_LM83=m
    CONFIG_SENSORS_LM85=m
    CONFIG_SENSORS_LM87=m
    CONFIG_SENSORS_LM90=m
    CONFIG_SENSORS_LM92=m
    CONFIG_SENSORS_MAX1619=m
    CONFIG_SENSORS_PC87360=m
    CONFIG_SENSORS_SMSC47B397=m
    CONFIG_SENSORS_SIS5595=m
    CONFIG_SENSORS_SMSC47M1=m
    CONFIG_SENSORS_VIA686A=m
    CONFIG_SENSORS_W83781D=m
    CONFIG_SENSORS_W83L785TS=m
    CONFIG_SENSORS_W83627HF=m
    # Other I2C Chip support
    CONFIG_SENSORS_DS1337=m
    CONFIG_SENSORS_EEPROM=m
    CONFIG_SENSORS_PCF8574=m
    CONFIG_SENSORS_PCF8591=m
    CONFIG_SENSORS_RTC8564=m
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set
    # Dallas's 1-wire bus
    CONFIG_W1=m
    CONFIG_W1_MATROX=m
    CONFIG_W1_DS9490=m
    CONFIG_W1_DS9490_BRIDGE=m
    CONFIG_W1_THERM=m
    CONFIG_W1_SMEM=m
    # Misc devices
    # CONFIG_IBM_ASM is not set
    # Multimedia devices
    CONFIG_VIDEO_DEV=m
    # Video For Linux
    # Video Adapters
    CONFIG_VIDEO_BT848=m
    CONFIG_VIDEO_PMS=m
    CONFIG_VIDEO_BWQCAM=m
    CONFIG_VIDEO_CQCAM=m
    CONFIG_VIDEO_W9966=m
    CONFIG_VIDEO_CPIA=m
    CONFIG_VIDEO_CPIA_PP=m
    CONFIG_VIDEO_CPIA_USB=m
    CONFIG_VIDEO_SAA5246A=m
    CONFIG_VIDEO_SAA5249=m
    CONFIG_TUNER_3036=m
    CONFIG_VIDEO_STRADIS=m
    # CONFIG_VIDEO_ZORAN is not set
    # CONFIG_VIDEO_ZR36120 is not set
    CONFIG_VIDEO_MEYE=m
    CONFIG_VIDEO_SAA7134=m
    CONFIG_VIDEO_SAA7134_DVB=m
    CONFIG_VIDEO_MXB=m
    CONFIG_VIDEO_DPC=m
    CONFIG_VIDEO_HEXIUM_ORION=m
    CONFIG_VIDEO_HEXIUM_GEMINI=m
    CONFIG_VIDEO_CX88=m
    CONFIG_VIDEO_CX88_DVB=m
    CONFIG_VIDEO_OVCAMCHIP=m
    # Radio Adapters
    CONFIG_RADIO_CADET=m
    CONFIG_RADIO_RTRACK=m
    CONFIG_RADIO_RTRACK2=m
    CONFIG_RADIO_AZTECH=m
    CONFIG_RADIO_GEMTEK=m
    CONFIG_RADIO_GEMTEK_PCI=m
    CONFIG_RADIO_MAXIRADIO=m
    CONFIG_RADIO_MAESTRO=m
    CONFIG_RADIO_SF16FMI=m
    CONFIG_RADIO_SF16FMR2=m
    CONFIG_RADIO_TERRATEC=m
    CONFIG_RADIO_TRUST=m
    CONFIG_RADIO_TYPHOON=m
    # CONFIG_RADIO_TYPHOON_PROC_FS is not set
    CONFIG_RADIO_ZOLTRIX=m
    # Digital Video Broadcasting Devices
    CONFIG_DVB=y
    CONFIG_DVB_CORE=m
    # Supported SAA7146 based PCI Adapters
    CONFIG_DVB_AV7110=m
    CONFIG_DVB_AV7110_OSD=y
    CONFIG_DVB_BUDGET=m
    CONFIG_DVB_BUDGET_CI=m
    CONFIG_DVB_BUDGET_AV=m
    CONFIG_DVB_BUDGET_PATCH=m
    # Supported USB Adapters
    CONFIG_DVB_TTUSB_BUDGET=m
    CONFIG_DVB_TTUSB_DEC=m
    CONFIG_DVB_DIBUSB=m
    CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES=y
    # CONFIG_DVB_DIBCOM_DEBUG is not set
    CONFIG_DVB_CINERGYT2=m
    CONFIG_DVB_CINERGYT2_TUNING=y
    CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
    CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
    CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
    CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
    CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
    # Supported FlexCopII (B2C2) Adapters
    CONFIG_DVB_B2C2_FLEXCOP=m
    CONFIG_DVB_B2C2_FLEXCOP_PCI=m
    CONFIG_DVB_B2C2_FLEXCOP_USB=m
    # CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
    CONFIG_DVB_B2C2_SKYSTAR=m
    # Supported BT878 Adapters
    CONFIG_DVB_BT8XX=m
    # Supported DVB Frontends
    # Customise DVB Frontends
    # DVB-S (satellite) frontends
    CONFIG_DVB_STV0299=m
    CONFIG_DVB_CX24110=m
    CONFIG_DVB_TDA8083=m
    CONFIG_DVB_TDA80XX=m
    CONFIG_DVB_MT312=m
    CONFIG_DVB_VES1X93=m
    # DVB-T (terrestrial) frontends
    CONFIG_DVB_SP8870=m
    CONFIG_DVB_SP887X=m
    CONFIG_DVB_CX22700=m
    CONFIG_DVB_CX22702=m
    CONFIG_DVB_L64781=m
    CONFIG_DVB_TDA1004X=m
    CONFIG_DVB_NXT6000=m
    CONFIG_DVB_MT352=m
    CONFIG_DVB_DIB3000MB=m
    CONFIG_DVB_DIB3000MC=m
    # DVB-C (cable) frontends
    CONFIG_DVB_ATMEL_AT76C651=m
    CONFIG_DVB_VES1820=m
    CONFIG_DVB_TDA10021=m
    CONFIG_DVB_STV0297=m
    # ATSC (North American/Korean Terresterial DTV) frontends
    CONFIG_DVB_NXT2002=m
    CONFIG_DVB_OR51211=m
    CONFIG_DVB_OR51132=m
    CONFIG_VIDEO_SAA7146=m
    CONFIG_VIDEO_SAA7146_VV=m
    CONFIG_VIDEO_VIDEOBUF=m
    CONFIG_VIDEO_TUNER=m
    CONFIG_VIDEO_BUF=m
    CONFIG_VIDEO_BUF_DVB=m
    CONFIG_VIDEO_BTCX=m
    CONFIG_VIDEO_IR=m
    CONFIG_VIDEO_TVEEPROM=m
    # Graphics support
    CONFIG_FB=y
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    CONFIG_FB_SOFT_CURSOR=y
    # CONFIG_FB_MACMODES is not set
    CONFIG_FB_MODE_HELPERS=y
    # CONFIG_FB_TILEBLITTING is not set
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    CONFIG_FB_VESA=y
    CONFIG_FB_VESA_STD=y
    # CONFIG_FB_VESA_TNG is not set
    CONFIG_VIDEO_SELECT=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    CONFIG_FB_I810=m
    CONFIG_FB_I810_GTF=y
    CONFIG_FB_INTEL=m
    # CONFIG_FB_INTEL_DEBUG is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON_OLD is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_VIRTUAL is not set
    # Console display driver support
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    CONFIG_FONTS=y
    # CONFIG_FONT_8x8 is not set
    CONFIG_FONT_8x16=y
    # CONFIG_FONT_6x11 is not set
    # CONFIG_FONT_PEARL_8x8 is not set
    # CONFIG_FONT_ACORN_8x8 is not set
    # CONFIG_FONT_MINI_4x6 is not set
    # CONFIG_FONT_SUN8x16 is not set
    # CONFIG_FONT_SUN12x22 is not set
    # Logo configuration
    # CONFIG_LOGO is not set
    CONFIG_BACKLIGHT_LCD_SUPPORT=y
    CONFIG_BACKLIGHT_CLASS_DEVICE=m
    CONFIG_BACKLIGHT_DEVICE=y
    CONFIG_LCD_CLASS_DEVICE=m
    CONFIG_LCD_DEVICE=y
    CONFIG_FB_SPLASH=y
    # Sound
    CONFIG_SOUND=m
    # Advanced Linux Sound Architecture
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_HWDEP=m
    CONFIG_SND_RAWMIDI=m
    CONFIG_SND_SEQUENCER=m
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set
    CONFIG_SND_GENERIC_PM=y
    # Generic devices
    CONFIG_SND_MPU401_UART=m
    CONFIG_SND_OPL3_LIB=m
    CONFIG_SND_OPL4_LIB=m
    CONFIG_SND_VX_LIB=m
    CONFIG_SND_DUMMY=m
    CONFIG_SND_VIRMIDI=m
    CONFIG_SND_MTPAV=m
    CONFIG_SND_SERIAL_U16550=m
    CONFIG_SND_MPU401=m
    # ISA devices
    CONFIG_SND_AD1848_LIB=m
    CONFIG_SND_CS4231_LIB=m
    CONFIG_SND_AD1816A=m
    CONFIG_SND_AD1848=m
    CONFIG_SND_CS4231=m
    CONFIG_SND_CS4232=m
    CONFIG_SND_CS4236=m
    CONFIG_SND_ES968=m
    CONFIG_SND_ES1688=m
    CONFIG_SND_ES18XX=m
    CONFIG_SND_GUS_SYNTH=m
    CONFIG_SND_GUSCLASSIC=m
    CONFIG_SND_GUSEXTREME=m
    CONFIG_SND_GUSMAX=m
    CONFIG_SND_INTERWAVE=m
    CONFIG_SND_INTERWAVE_STB=m
    CONFIG_SND_OPTI92X_AD1848=m
    CONFIG_SND_OPTI92X_CS4231=m
    CONFIG_SND_OPTI93X=m
    CONFIG_SND_SB8=m
    CONFIG_SND_SB16=m
    CONFIG_SND_SBAWE=m
    CONFIG_SND_SB16_CSP=y
    CONFIG_SND_WAVEFRONT=m
    CONFIG_SND_ALS100=m
    CONFIG_SND_AZT2320=m
    CONFIG_SND_CMI8330=m
    CONFIG_SND_DT019X=m
    CONFIG_SND_OPL3SA2=m
    CONFIG_SND_SGALAXY=m
    CONFIG_SND_SSCAPE=m
    # PCI devices
    CONFIG_SND_AC97_CODEC=m
    CONFIG_SND_ALI5451=m
    CONFIG_SND_ATIIXP=m
    CONFIG_SND_ATIIXP_MODEM=m
    CONFIG_SND_AU8810=m
    CONFIG_SND_AU8820=m
    CONFIG_SND_AU8830=m
    CONFIG_SND_AZT3328=m
    CONFIG_SND_BT87X=m
    # CONFIG_SND_BT87X_OVERCLOCK is not set
    CONFIG_SND_CS46XX=m
    CONFIG_SND_CS46XX_NEW_DSP=y
    CONFIG_SND_CS4281=m
    CONFIG_SND_EMU10K1=m
    CONFIG_SND_EMU10K1X=m
    CONFIG_SND_CA0106=m
    CONFIG_SND_KORG1212=m
    CONFIG_SND_MIXART=m
    CONFIG_SND_NM256=m
    CONFIG_SND_RME32=m
    CONFIG_SND_RME96=m
    CONFIG_SND_RME9652=m
    CONFIG_SND_HDSP=m
    CONFIG_SND_TRIDENT=m
    CONFIG_SND_YMFPCI=m
    CONFIG_SND_ALS4000=m
    CONFIG_SND_CMIPCI=m
    CONFIG_SND_ENS1370=m
    CONFIG_SND_ENS1371=m
    CONFIG_SND_ES1938=m
    CONFIG_SND_ES1968=m
    CONFIG_SND_MAESTRO3=m
    CONFIG_SND_FM801=m
    CONFIG_SND_FM801_TEA575X=m
    CONFIG_SND_ICE1712=m
    CONFIG_SND_ICE1724=m
    CONFIG_SND_INTEL8X0=m
    CONFIG_SND_INTEL8X0M=m
    CONFIG_SND_SONICVIBES=m
    CONFIG_SND_VIA82XX=m
    CONFIG_SND_VIA82XX_MODEM=m
    CONFIG_SND_VX222=m
    CONFIG_SND_HDA_INTEL=m
    # USB devices
    CONFIG_SND_USB_AUDIO=m
    CONFIG_SND_USB_USX2Y=m
    # PCMCIA devices
    CONFIG_SND_VXPOCKET=m
    CONFIG_SND_VXP440=m
    CONFIG_SND_PDAUDIOCF=m
    # Open Sound System
    # CONFIG_SOUND_PRIME is not set
    # USB support
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set
    # Miscellaneous USB options
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    CONFIG_USB_DYNAMIC_MINORS=y
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set
    # USB Host Controller Drivers
    CONFIG_USB_EHCI_HCD=m
    CONFIG_USB_EHCI_SPLIT_ISO=y
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    CONFIG_USB_OHCI_HCD=m
    # CONFIG_USB_OHCI_BIG_ENDIAN is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    CONFIG_USB_UHCI_HCD=m
    CONFIG_USB_SL811_HCD=m
    CONFIG_USB_SL811_CS=m
    # USB Device Class drivers
    CONFIG_USB_AUDIO=m
    # USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
    CONFIG_USB_MIDI=m
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
    CONFIG_USB_STORAGE=m
    # CONFIG_USB_STORAGE_DEBUG is not set
    CONFIG_USB_STORAGE_DATAFAB=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_ISD200=y
    CONFIG_USB_STORAGE_DPCM=y
    # CONFIG_USB_STORAGE_USBAT is not set
    CONFIG_USB_STORAGE_SDDR09=y
    CONFIG_USB_STORAGE_SDDR55=y
    CONFIG_USB_STORAGE_JUMPSHOT=y
    # USB Input Devices
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y
    CONFIG_HID_FF=y
    CONFIG_HID_PID=y
    CONFIG_LOGITECH_FF=y
    CONFIG_THRUSTMASTER_FF=y
    CONFIG_USB_HIDDEV=y
    # USB HID Boot Protocol drivers
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    CONFIG_USB_AIPTEK=m
    CONFIG_USB_WACOM=m
    CONFIG_USB_KBTAB=m
    CONFIG_USB_POWERMATE=m
    CONFIG_USB_MTOUCH=m
    CONFIG_USB_EGALAX=m
    CONFIG_USB_XPAD=m
    CONFIG_USB_ATI_REMOTE=m
    # USB Imaging devices
    CONFIG_USB_MDC800=m
    CONFIG_USB_MICROTEK=m
    # USB Multimedia devices
    CONFIG_USB_DABUSB=m
    CONFIG_USB_VICAM=m
    CONFIG_USB_DSBR=m
    CONFIG_USB_IBMCAM=m
    CONFIG_USB_KONICAWC=m
    CONFIG_USB_OV511=m
    CONFIG_USB_SE401=m
    CONFIG_USB_SN9C102=m
    CONFIG_USB_STV680=m
    CONFIG_USB_W9968CF=m
    CONFIG_USB_PWC=m
    # USB Network Adapters
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m
    # USB Host-to-Host Cables
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_GENESYS=y
    CONFIG_USB_NET1080=y
    CONFIG_USB_PL2301=y
    CONFIG_USB_KC2190=y
    # Intelligent USB Devices/Gadgets
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_ZAURUS=y
    CONFIG_USB_CDCETHER=y
    # USB Network Adapters
    CONFIG_USB_AX8817X=y
    CONFIG_USB_ZD1201=m
    CONFIG_USB_MON=m
    # USB port drivers
    CONFIG_USB_USS720=m
    # USB Serial Converter support
    CONFIG_USB_SERIAL=m
    CONFIG_USB_SERIAL_GENERIC=y
    CONFIG_USB_SERIAL_AIRPRIME=m
    CONFIG_USB_SERIAL_BELKIN=m
    CONFIG_USB_SERIAL_WHITEHEAT=m
    CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
    CONFIG_USB_SERIAL_CP2101=m
    CONFIG_USB_SERIAL_CYPRESS_M8=m
    CONFIG_USB_SERIAL_EMPEG=m
    CONFIG_USB_SERIAL_FTDI_SIO=m
    CONFIG_USB_SERIAL_VISOR=m
    CONFIG_USB_SERIAL_IPAQ=m
    CONFIG_USB_SERIAL_IR=m
    CONFIG_USB_SERIAL_EDGEPORT=m
    CONFIG_USB_SERIAL_EDGEPORT_TI=m
    CONFIG_USB_SERIAL_GARMIN=m
    CONFIG_USB_SERIAL_IPW=m
    CONFIG_USB_SERIAL_KEYSPAN_PDA=m
    CONFIG_USB_SERIAL_KEYSPAN=m
    CONFIG_USB_SERIAL_KEYSPAN_MPR=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19=y
    CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
    CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
    CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
    CONFIG_USB_SERIAL_KLSI=m
    CONFIG_USB_SERIAL_KOBIL_SCT=m
    CONFIG_USB_SERIAL_MCT_U232=m
    CONFIG_USB_SERIAL_PL2303=m
    CONFIG_USB_SERIAL_HP4X=m
    CONFIG_USB_SERIAL_SAFE=m
    CONFIG_USB_SERIAL_SAFE_PADDED=y
    CONFIG_USB_SERIAL_TI=m
    CONFIG_USB_SERIAL_CYBERJACK=m
    CONFIG_USB_SERIAL_XIRCOM=m
    CONFIG_USB_SERIAL_OPTION=m
    CONFIG_USB_SERIAL_OMNINET=m
    CONFIG_USB_EZUSB=y
    # USB Miscellaneous drivers
    CONFIG_USB_EMI62=m
    CONFIG_USB_EMI26=m
    CONFIG_USB_AUERSWALD=m
    CONFIG_USB_RIO500=m
    CONFIG_USB_LEGOTOWER=m
    CONFIG_USB_LCD=m
    CONFIG_USB_LED=m
    CONFIG_USB_CYTHERM=m
    CONFIG_USB_PHIDGETKIT=m
    CONFIG_USB_PHIDGETSERVO=m
    CONFIG_USB_IDMOUSE=m
    CONFIG_USB_SISUSBVGA=m
    CONFIG_USB_TEST=m
    # USB ATM/DSL drivers
    CONFIG_USB_ATM=m
    CONFIG_USB_SPEEDTOUCH=m
    # USB Gadget Support
    CONFIG_USB_GADGET=m
    # CONFIG_USB_GADGET_DEBUG_FILES is not set
    CONFIG_USB_GADGET_NET2280=y
    CONFIG_USB_NET2280=m
    # CONFIG_USB_GADGET_PXA2XX is not set
    # CONFIG_USB_GADGET_GOKU is not set
    # CONFIG_USB_GADGET_LH7A40X is not set
    # CONFIG_USB_GADGET_OMAP is not set
    # CONFIG_USB_GADGET_DUMMY_HCD is not set
    CONFIG_USB_GADGET_DUALSPEED=y
    # CONFIG_USB_ZERO is not set
    CONFIG_USB_ETH=m
    CONFIG_USB_ETH_RNDIS=y
    CONFIG_USB_GADGETFS=m
    CONFIG_USB_FILE_STORAGE=m
    # CONFIG_USB_FILE_STORAGE_TEST is not set
    CONFIG_USB_G_SERIAL=m
    # MMC/SD Card support
    CONFIG_MMC=m
    # CONFIG_MMC_DEBUG is not set
    CONFIG_MMC_BLOCK=m
    CONFIG_MMC_WBSD=m
    # InfiniBand support
    # CONFIG_INFINIBAND is not set
    # File systems
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    CONFIG_REISER4_FS=y
    # CONFIG_REISER4_DEBUG is not set
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    CONFIG_REISERFS_FS_XATTR=y
    CONFIG_REISERFS_FS_POSIX_ACL=y
    CONFIG_REISERFS_FS_SECURITY=y
    CONFIG_JFS_FS=y
    CONFIG_JFS_POSIX_ACL=y
    # CONFIG_JFS_SECURITY is not set
    # CONFIG_JFS_DEBUG is not set
    # CONFIG_JFS_STATISTICS is not set
    CONFIG_FS_POSIX_ACL=y
    # XFS support
    CONFIG_XFS_FS=y
    CONFIG_XFS_EXPORT=y
    # CONFIG_XFS_RT is not set
    CONFIG_XFS_QUOTA=y
    CONFIG_XFS_SECURITY=y
    CONFIG_XFS_POSIX_ACL=y
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    CONFIG_QUOTA=y
    CONFIG_QFMT_V1=m
    CONFIG_QFMT_V2=m
    CONFIG_QUOTACTL=y
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=y
    # CD-ROM/DVD Filesystems
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=y
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y
    # DOS/FAT/NT Filesystems
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y
    # Pseudo filesystems
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    # CONFIG_DEVFS_DEBUG is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_XATTR is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # Miscellaneous filesystems
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    CONFIG_UFS_FS=m
    # CONFIG_UFS_FS_WRITE is not set
    # Network File Systems
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    CONFIG_NFS_V4=y
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V4=y
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    CONFIG_SUNRPC_GSS=y
    CONFIG_RPCSEC_GSS_KRB5=y
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    CONFIG_CIFS=m
    # CONFIG_CIFS_STATS is not set
    # CONFIG_CIFS_XATTR is not set
    # CONFIG_CIFS_EXPERIMENTAL is not set
    CONFIG_NCP_FS=m
    # CONFIG_NCPFS_PACKET_SIGNING is not set
    # CONFIG_NCPFS_IOCTL_LOCKING is not set
    # CONFIG_NCPFS_STRONG is not set
    CONFIG_NCPFS_NFS_NS=y
    CONFIG_NCPFS_OS2_NS=y
    CONFIG_NCPFS_SMALLDOS=y
    CONFIG_NCPFS_NLS=y
    # CONFIG_NCPFS_EXTRAS is not set
    CONFIG_CODA_FS=m
    # CONFIG_CODA_FS_OLD_API is not set
    CONFIG_AFS_FS=m
    # CONFIG_SH_FS is not set
    CONFIG_RXRPC=m
    # Partition Types
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    # Native Language Support
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=m
    CONFIG_NLS_CODEPAGE_737=m
    CONFIG_NLS_CODEPAGE_775=m
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    CONFIG_NLS_CODEPAGE_855=m
    CONFIG_NLS_CODEPAGE_857=m
    CONFIG_NLS_CODEPAGE_860=m
    CONFIG_NLS_CODEPAGE_861=m
    CONFIG_NLS_CODEPAGE_862=m
    CONFIG_NLS_CODEPAGE_863=m
    CONFIG_NLS_CODEPAGE_864=m
    CONFIG_NLS_CODEPAGE_865=m
    CONFIG_NLS_CODEPAGE_866=m
    CONFIG_NLS_CODEPAGE_869=m
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    CONFIG_NLS_ASCII=m
    CONFIG_NLS_ISO8859_1=y
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    CONFIG_NLS_ISO8859_5=m
    CONFIG_NLS_ISO8859_6=m
    CONFIG_NLS_ISO8859_7=m
    CONFIG_NLS_ISO8859_9=m
    CONFIG_NLS_ISO8859_13=m
    CONFIG_NLS_ISO8859_14=m
    CONFIG_NLS_ISO8859_15=m
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=y
    # Profiling support
    # CONFIG_PROFILING is not set
    # Kernel hacking
    # CONFIG_PRINTK_TIME is not set
    CONFIG_DEBUG_KERNEL=y
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_LOG_BUF_SHIFT=15
    # CONFIG_SCHEDSTATS is not set
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_PREEMPT is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_KOBJECT is not set
    # CONFIG_DEBUG_HIGHMEM is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_FS is not set
    # CONFIG_FRAME_POINTER is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_KPROBES is not set
    # CONFIG_DEBUG_STACK_USAGE is not set
    # Page alloc debug is incompatible with Software Suspend on i386
    # CONFIG_4KSTACKS is not set
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    # Security options
    # CONFIG_KEYS is not set
    CONFIG_SECURITY=y
    # CONFIG_SECURITY_NETWORK is not set
    CONFIG_SECURITY_CAPABILITIES=m
    CONFIG_SECURITY_ROOTPLUG=m
    CONFIG_SECURITY_SECLVL=m
    # CONFIG_SECURITY_REALTIME is not set
    # CONFIG_SECURITY_SELINUX is not set
    # Cryptographic options
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=y
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_WP512=m
    CONFIG_CRYPTO_TGR192=m
    CONFIG_CRYPTO_DES=y
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES_586=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_TEA=m
    CONFIG_CRYPTO_ARC4=m
    CONFIG_CRYPTO_KHAZAD=m
    CONFIG_CRYPTO_ANUBIS=m
    CONFIG_CRYPTO_DEFLATE=y
    CONFIG_CRYPTO_LZF=y
    CONFIG_CRYPTO_MICHAEL_MIC=m
    CONFIG_CRYPTO_CRC32C=m
    CONFIG_CRYPTO_TEST=m
    # Hardware crypto devices
    CONFIG_CRYPTO_DEV_PADLOCK=m
    CONFIG_CRYPTO_DEV_PADLOCK_AES=y
    # Library routines
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_PC=y
    The build does not finish with an error.
    Any ideas?

    I have successfully build my kernel2612-ati with this PKGBUILD:
    # Contributor: giorgosc61
    pkgname=kernel2612-ati
    pkgver=2.6.12
    pkgrel=2
    pkgdesc="The Linux Kernel 2.6.12 with modules (IDE support),ATI Enabled"
    url="http://www.kernel.org"
    depends=('module-init-tools')
    install=kernel26.install
    ##### add any patch sources to this section
    source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$pkgver.tar.bz2
            http://www.kernel.org/pub/linux/kernel/ … gver.2.bz2
            config logo_linux_clut224.ppm ndevfs.patch
            #acpi-20050408-2.6.12-rc2.diff.fixup
            http://www.kernel.org/pub/linux/kernel/ … 6-13.patch
            ftp://ftp.kernel.org/pub/linux/kernel/p … 2.diff.bz2
            http://ck.kolivas.org/patches/2.6/2.6.1 … mpat2.diff
            http://gaugusch.at/acpi-dsdt-initrd-pat … 6.9.patch)
    # Function to grab var from src
    getvar() {
    old=$(cat Makefile | grep "^$1")
    echo $(echo ${old/"$1 ="/} | sed -e "s/[ ]*(.*)[ ]*/1/g")
    return 0
    build() {
    cd $startdir/src/linux-$pkgver
    ##### Uncomment and apply any patches here
      patch -Np1 -i ../patch-$pkgver.2 || return 1
      patch -Np1 -i ../ndevfs.patch || return 1
      patch -Np1 -i ../inotify-0.23-rml-2.6.12-rc6-13.patch || return 1
      patch -Np1 -i ../acpi-20050408-2.6.12.diff || return 1
      patch -Np1 -i ../nvidia_6111-6629_compat2.diff || return 1
      patch -Np1 -i ../acpi-dsdt-initrd-patch-v0.7d-2.6.9.patch || return 1
    ##### Arch logo - not compatible with gensplash!
    cp ../logo_linux_clut224.ppm drivers/video/logo/
    # get rid of the 'i' in i686
    carch=`echo $CARCH | sed 's|i||'`
    cat ../config | sed "s|#CARCH#|$carch|g" >./.config
    ##### Load config - uncomment your preferred config method
    yes "" | make config
    #make oldconfig || return 1
    #make menuconfig
    #make xconfig
    #make gconfig
    ##### NO USER CHANGES BELOW HERE #####
    # save the current pkgname
    old_pkgname=$pkgname
    # set pkgname for build purposes - DO NOT alter!
    pkgname=kernel26
    # save the updated config to build with today's date
    cp ./.config $startdir/config-$(date +%b%d-%Hh)
    # get EXTRAVERSION from Makefile to create a unique pkgname and /usr/src directory
    #_kernextra=$(getvar "EXTRAVERSION")
    # grab the 2.6.x.y version suffix from pkgver
    # _y="`echo $pkgver | cut --delim "." --fields 4`"
    # remove .y version suffix from _kernextra
    #_kernextra="`echo $_kernextra | sed "s|.$_y||g"`"
    # Read the full kernel version info from new config to use in pathnames and pkgname
    . ./.config
    # Kernel custom - to create a unique pkgname (see below)
    #_kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
    _kerncust="${CONFIG_LOCALVERSION}"
    # Kernel release - will be the same as Makefile
    _kernrel="${pkgver}${_kerncust}"
    # Get the pkgver suffix for unique pkgname and /boot file suffices
    _pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`"
    # Set /boot file suffices from kernel release and pkgver suffix
    _kernboot="${_pkgversuf}${_kerncust}"
    # Set a new pkgname from kernel release and pkgver suffix
    pkgname="${pkgname}${_pkgversuf}${_kerncust}"
    # build!
    # echo
    # echo -n "Do you want to make clean (default YES)? (YES/NO): "
    # read choice
    # echo
    # echo -n "Press any key to start make or CTRL+C to quit"
    # read anykey
    # if [ "${choice}" = "NO" ] ; then
    # make bzImage modules || return 1
    # else
    make clean bzImage modules || return 1
    # fi
    mkdir -p $startdir/pkg/{lib/modules,boot}
    make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
    cp System.map $startdir/pkg/boot/System.map26${_kernboot}
    cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
    install -D -m644 Makefile
      $startdir/pkg/usr/src/linux-${_kernrel}/Makefile
    install -D -m644 .config
      $startdir/pkg/usr/src/linux-${_kernrel}/.config
    install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
    for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
      cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
    done
    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers $startdir/pkg/usr/src/linux-${_kernrel}
    cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
    cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
    cp arch/i386/kernel/asm-offsets.s
      $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
    # copy in Kconfig files
    for i in `find . -name "Kconfig*"`; do
      mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
      cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
    done
    cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
    chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
    cd $startdir/pkg/lib/modules/${_kernrel} &&
      (rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)
    # Correct the pkgname in our PKGBUILD - this allows correct gensync operation
    # NOTE: pkgname variable must be declared with first 10 lines of PKGBUILD!
    cd $startdir
    sed -i "1,11 s|pkgname=$old_pkgname|pkgname=$pkgname|" ./PKGBUILD
    md5sums=('c5d2a1b62e1dad502c871bba267337d5' '3a4225e9dff9d6d03da41327e972f161'
             '2548307be940987c23545c7a65188b5f' '5a62bcc7e96601052c7405459b483826'
             '0ea10324c7e9a78e6633dc8c784e8deb' '39e751f6c4eaeb2bde1e78c0e9e9d7a9'
             '597f8944cf6a65c41373e952e8f46a56' '82488604906bbba37a412c78d7b5c5f0'
             '977bc6069e122e5f07b0311e094b5733')
    In this kernel I have made the modifications for ati-drivers in the kernel26 config as shown in the wiki. I used the PKGBUILD from the wiki for custom kernels.
    I installed it and now I am posting from it.
    I downloaded the ati-drivers-5 PKGBUILD to build my ati drivers.In the PKGBUILD I used
    _kernel=2.6.12-ati
    When I makepkg I get:
    [root@myhost ati-drivers]# makepkg -f
    ==> Making package: ati-drivers 8.14.13-5 (Mon Jul 25 19:40:59 UTC 2005)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    ==>     Using local copy of fglrx_6_8_0-8.14.13-1.i386.rpm
    ==>     Using local copy of fglrx-2.6-agpgart.patch
    ==>     Using local copy of fglrx-2.6.12-inter_module_get.patch
    ==>     Using local copy of fglrx-2.6.12-new-agpgart.patch
    ==>     Found fireglcontrol.desktop in build dir
    ==> Validating source files with MD5sums
        fglrx_6_8_0-8.14.13-1.i386.rpm ... Passed
        fglrx-2.6-agpgart.patch ... Passed
        fglrx-2.6.12-inter_module_get.patch ... Passed
        fglrx-2.6.12-new-agpgart.patch ... Passed
        fireglcontrol.desktop ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    ./lib/modules/fglrx/build_mod/2.6.x/Makefile
    ./lib/modules/fglrx/build_mod/agp.h
    ./lib/modules/fglrx/build_mod/agp3.c
    ./lib/modules/fglrx/build_mod/agp_backend.h
    ./lib/modules/fglrx/build_mod/agpgart.h
    ./lib/modules/fglrx/build_mod/agpgart_be.c
    ./lib/modules/fglrx/build_mod/drm.h
    ./lib/modules/fglrx/build_mod/drmP.h
    ./lib/modules/fglrx/build_mod/drm_compat.h
    ./lib/modules/fglrx/build_mod/drm_os_linux.h
    ./lib/modules/fglrx/build_mod/drm_proc.h
    ./lib/modules/fglrx/build_mod/firegl_public.c
    ./lib/modules/fglrx/build_mod/firegl_public.h
    ./lib/modules/fglrx/build_mod/i7505-agp.c
    ./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC2
    ./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC3
    ./lib/modules/fglrx/build_mod/make.sh
    ./lib/modules/fglrx/build_mod/nvidia-agp.c
    ./lib/modules/fglrx/make_install.sh
    ./opt/kde3/share/applnk/fireglcontrol_kde3.desktop
    ./usr/X11R6/bin/fgl_glxgears
    ./usr/X11R6/bin/fglrx_xgamma
    ./usr/X11R6/bin/fglrxconfig
    ./usr/X11R6/bin/fglrxinfo
    ./usr/X11R6/bin/fireglcontrolpanel
    ./usr/X11R6/include/X11/extensions/fglrx_gamma.h
    ./usr/X11R6/lib/libGL.so.1.2
    ./usr/X11R6/lib/libfglrx_gamma.a
    ./usr/X11R6/lib/libfglrx_gamma.so.1.0
    ./usr/X11R6/lib/modules/dri/atiogl_a_dri.so
    ./usr/X11R6/lib/modules/dri/fglrx_dri.so
    ./usr/X11R6/lib/modules/drivers/fglrx_drv.o
    ./usr/X11R6/lib/modules/linux/libfglrxdrm.a
    ./usr/include/GL/glxATI.h
    ./usr/share/applnk/fireglcontrol.kdelnk
    ./usr/share/doc/fglrx/ATI_LICENSE.TXT
    ./usr/share/doc/fglrx/LICENSE.GPL
    ./usr/share/doc/fglrx/LICENSE.QPL
    ./usr/share/doc/fglrx/articles/1gbhang.html
    ./usr/share/doc/fglrx/articles/4461.html
    ./usr/share/doc/fglrx/articles/4462.html
    ./usr/share/doc/fglrx/articles/4463.html
    ./usr/share/doc/fglrx/articles/4464.html
    ./usr/share/doc/fglrx/articles/4469.html
    ./usr/share/doc/fglrx/articles/4470.html
    ./usr/share/doc/fglrx/articles/4475.html
    ./usr/share/doc/fglrx/articles/4478.html
    ./usr/share/doc/fglrx/articles/4479.html
    ./usr/share/doc/fglrx/articles/4480.html
    ./usr/share/doc/fglrx/articles/4481.html
    ./usr/share/doc/fglrx/articles/4482.html
    ./usr/share/doc/fglrx/articles/4483.html
    ./usr/share/doc/fglrx/articles/4484.html
    ./usr/share/doc/fglrx/articles/4485.html
    ./usr/share/doc/fglrx/articles/corruptstereo.html
    ./usr/share/doc/fglrx/articles/corruptvtswitch.html
    ./usr/share/doc/fglrx/articles/devshm.html
    ./usr/share/doc/fglrx/articles/dga3dhang.html
    ./usr/share/doc/fglrx/articles/doom3corrupt.html
    ./usr/share/doc/fglrx/articles/dualheadvideo.html
    ./usr/share/doc/fglrx/articles/laptopsuspend.html
    ./usr/share/doc/fglrx/articles/missingdrmheaders.html
    ./usr/share/doc/fglrx/articles/mousecursorhang.html
    ./usr/share/doc/fglrx/articles/no3d-aiw8500dv.html
    ./usr/share/doc/fglrx/articles/no3d-kt400.html
    ./usr/share/doc/fglrx/articles/nomembercount.html
    ./usr/share/doc/fglrx/articles/pcie3dmemoryleak.html
    ./usr/share/doc/fglrx/articles/r420blankdisplay.html
    ./usr/share/doc/fglrx/articles/rv280dviblankdisplay.html
    ./usr/share/doc/fglrx/articles/rv350springdale.html
    ./usr/share/doc/fglrx/articles/secondheadcorruption.html
    ./usr/share/doc/fglrx/articles/xf86_enodev.html
    ./usr/share/doc/fglrx/articles/xrestartpcie.html
    ./usr/share/doc/fglrx/articles/xvsatshift.html
    ./usr/share/doc/fglrx/driverfaq.html
    ./usr/share/doc/fglrx/index.html
    ./usr/share/doc/fglrx/issues.html
    ./usr/share/doc/fglrx/linuxfaq.html
    ./usr/share/doc/fglrx/release-notes/images/backgrnd.gif
    ./usr/share/doc/fglrx/release-notes/images/caution.gif
    ./usr/share/doc/fglrx/release-notes/images/clipbrd.gif
    ./usr/share/doc/fglrx/release-notes/images/noboarder.gif
    ./usr/share/doc/fglrx/release-notes/index.html
    ./usr/share/doc/fglrx/tips-linux.html
    ./usr/share/doc/fglrx/user-manual/index.html
    ./usr/share/gnome/apps/fireglcontrol.desktop
    ./usr/share/icons/ati.xpm
    ./usr/src/ATI/fglrx_panel_sources.tgz
    ./usr/src/ATI/fglrx_sample_source.tgz
    50672 blocks
    patching file firegl_public.c
    Hunk #1 succeeded at 340 (offset -1 lines).
    patching file firegl_public.c
    Hunk #1 succeeded at 997 (offset -5 lines).
    Hunk #3 succeeded at 2940 (offset -5 lines).
    patching file agpgart_be.c
    Hunk #1 succeeded at 7067 (offset -14 lines).
    Hunk #3 succeeded at 7153 (offset -14 lines).
    Hunk #5 succeeded at 7204 (offset -14 lines).
    make: Entering directory `/usr/src/linux-2.6.12-ati'
      CC [M]  /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/agpgart_be.o
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_init':
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/agpgart_be.c:7613: warning: `pm_register' is deprecated (declared at include/linux/pm.h:106)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_cleanup':
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/agpgart_be.c:7623: warning: `pm_unregister_all' is deprecated (declared at include/linux/pm.h:116)
      CC [M]  /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.o
    In file included from /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:125:
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.h:56:48: warning: backslash and newline separated by space
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.h:57:6: warning: backslash and newline separated by space
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.h:58:41: warning: backslash and newline separated by space
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_putminor':
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:508: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:568)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:510: warning: `inter_module_unregister' is deprecated (declared at include/linux/module.h:565)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_register':
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:530: warning: `inter_module_register' is deprecated (declared at include/linux/module.h:564)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:561: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:568)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_verify_area':
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:1446: warning: `verify_area' is deprecated (declared at include/asm/uaccess.h:105)
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c: At top level:
    /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/firegl_public.c:2655: warning: initialization from incompatible pointer type
      LD [M]  /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/fglrx.o
      Building modules, stage 2.
      MODPOST
    Warning: could not find /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/.libfglrx_ip.a.GCC3.cmd for /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC3
      LD [M]  /var/abs/local/ati-drivers/src/lib/modules/fglrx/build_mod/fglrx.ko
    make: Leaving directory `/usr/src/linux-2.6.12-ati'
    ==> Compressing man pages...
    ==> Stripping debugging symbols from libraries...
    ==> Stripping symbols from binaries...
    ==> Generating .PKGINFO file...
    ==> Copying install script...
    ==> Generating .FILELIST file...
    ==> Compressing package...
    ==> Finished making: ati-drivers  (Mon Jul 25 19:41:25 UTC 2005)
    modprobe fglrx says fglrx not found.
    What exactly could be the problem?

  • Problems Installing the new version  7 of itunes

    I upgraded itunes to the new version 7.0 and when I try to load itunes I get a message "Quick time version 7.1 is installed Itunes requires version 7.1.3 or later version be installed. In the Itunes version 7 you automatic load the new quick time version 7.1.3 with the package. During loading Itunes version 7 I get a message add new missing files or repair damaged files. I select yes, the second choice is to uninstall Itunes. No luck still got the same message above. I tried uninstalling Itunes to see if there was a problem with the oirginal install, still recevied the repair files or add missing files message while downloading. Have also tried installing quick time version 7.1.3 sperately. Nothing seems to work. Any suggestions???
    Seems to be this upgrade... I can start quick time and I get the error message when I try and load Itunes?? Can anyone help out??

    I was able to fix my problem by going into add and delete programs. Select itunes and there will be an area "click here for support infomation" Check and run repair. Do this for both Itunes and Quick Time, but do Quick time first. After I did that itunes came right up and started to run. Good Luck!!

  • How to set up Print Specs and Profiles in CS5 Suite

    I am no color management expert but I do want to get my printer to print the same colors as my monitor displays in PSD, AI and InD applications.
    My Intel iMac and Cinema Display running OS10.5.8 are both color calibrated with Spyder 3 Elite to achieve correct color reproduction.
    After days of searching and testing, this is my solution which I offer to help those new to CS5.
    1. Start: PHOTOSHOP:
         Set colour settings (Edit>Color Settings) as follows:
              RGB - Adobe RGB 1998
              CMYK - US Web Coated (SWOP) v2 (This setting does not effect printer).
              Leave Grey and Spot as default 20%
         Color Management Policys:
              RGB, CMYK, Gray; all set to Preserve embedded Profiles
         Conversions Options:
              Engine - Adobe ACE
              Intent - Relative colourimetric ( my choice for AI artwork. Choose Perceptual for photos in PSD).
         Go to Save, give profile a name, and note the Conversion intent so you can create another profile for Perceptual and PSD. 
         (I called mine Epson R2400 and noted the Relative Colorimetric intent).
         Finally, Go to Settings at the top of the Color Settings dialogue and select the color profile you have just named and saved. Click OK
    2. Go to Bridge>Edit>Creative Suite Color Settings. Find your saved profile and select it and click Apply.
         Now AI and ID have the same colour preferences.
         Users without Bridge will have to set these items in Color Settings for each Adobe application.
    3.   Photoshop>File>Print: Color Management
              Color Handling - Photoshop Manages Color
              Printer Profile - Choose the ICC Profile to suite your printer and paper stock. I used Epson canned ICC SPR2400 Premium Glossy with great results.
              Rendering Intent - Relative Colorimetric for artwork or Perceptual for photos.
    4.  At top of Print dialogue box, select Printer (Epson Stylus Photo 2400 in my case).
         Below, Click and open Print Settings;
         Layout - select  Paper Size and number of pages (copies). Layout is one of several items in a drop down menu.
         Open the next drop down item, Color Matching. Check that he two options, Color Sync and Epson should be grayed out.
         Move to Print Settings.
              Media Type - depends on your paper. (mine is Photo Quality InkJet).
              Color - select Color or Black
              Color Settings - OFF, This turns off color management in Epson Driver leaving Photoshop in charge!
              Mode - I chose Advanced to get fine quality print. Automatic OK for general use.
          Click Save. Click Print and you should get a print matching your Monitor.
    ILLUSTRATOR CS5
    Bridge will ensure that Color Settings match Photoshop as 1. above. If you don’t have Bridge Go to Edit>Color Settings and specify the same as      Photoshop. Note Settings, at top of Color settings dialogue box requires the profile you created in Photoshop.
         Go to File >Print. There are 3 steps to check.
         In the  window at left are headings General, Marks and Bleed, Output, Graphics, Color Management, Advanced and Summary.
         These are self explanatory. If you do not use Bridge, check Color Management as below:
    1. Printer: your printer. Color Handling: Let Illustrator determine colors. Printer Profile: select your monitor RGB icc profile.
       Unlike Photoshop, do NOT use printer/paper ICC. Rendering intent: to suit your image.
    2. Bottom left of Print dialogue box is Page Setup. Set your size etc.
    3. Bottom Left is Printer. MOST IMPORTANT. Here are the similar setting options as PSD 4 above which require different handling.
         Select Layout, go down to Color Matching>select COLORSYNC not Epson. This ensures Apple ColorSync does color conversion.
         Profile - Automatic should appear with name of your preferred Printer/paper ICC below. ( be careful here as I have found AI sometimes finds the wrong      paper icc. Close Print and start again).
         Move down list to Print Settings - Basic:
              Page Set up - Standard; Media type - Your choice, (Photo Quality InkJet for me).
              Color - Color
              Color Settings OFF to ensure Epson printer driver does not try to manage color.
              Mode - Advanced if you want fine quality print. Automatic is OK for general use.
    4. Click Print to close Printer dialogue box. Click Print to close the Print dialogue box and you should get a print to match your on screen image.
    INDESIGN and General Comments.
    Always select your Printer first as settings vary according to printer type.
    InDesign Print set up is very similar to AI. Select Color Management at left and the Printer, Printer Profile and Rendering Intent require identical settings.
    Go to bottom left, Page Setup. Specify Printer and paper size. Select Printer and the settings required are the same as AI.
    If you switch between these apps there is considerable danger that the different Profile choices will trip you up. Photoshop color management requires the Printer/paper ICC, AI and InDesign require Monitor ICC. My primary error was to select my professionally scanned printer/paper ICC profile which resulted in weird colours on AI and ID. The clue that led me to choose my Monitor ICC profile instead was the ColorSync option in Color matching in AI. I hope you will find printing runs a lot smoother for you and I heartily invite better informed users than I, can add to, or qualify this post.
    May the Force be with you!

    Regarding print brightness at output. The Settings of monitor calibration determine white point and black point. At the time you run Spyder 3 or whatever your monitor calibrator is, the software sets a white point of your choosing. current iMacs are far too bright and prints resulting from unmodified Mac monitors will appear too dark because of the excessive screen brightness. My iMac at lowest reading is 139 candelas. To get prints which match the screen I specify 80 candelas. The Spyder software also reads ambient light in the room and makes a calculation which effects the white and black points registered for both viewing and printing. Since paper reflects a light level according to lighting conditions, we each view prints in different conditions according to illumination source. This effects also effects screen viewing so conditions determine what we see.
    In simple terms, ambient light reading also modifies the software calculations for colour output. If it is too high, prints are pale, too low and prints are too dark. If the Monitor calibration has been done properly there should be no problem. The point here is to make certain your calibration process is accurate. Personally I have calibrated in a dark room at night-time and I have calibrated In a shaded room at midday. Hugely different conditions. Under both circumstances I have found the calibration has resulted in good prints. So I suspect it is user white point settings or calibration error which results in prints being too dark or too light. I understand the data used by the calibration software applies to the ambient light reading to the monitor for reading conditions and uses other color gamut data for the printing process. So printing error must surely originate with the user.
    I welcome comment from more experienced people in this matter.
    Cheers,

  • How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

    Hi All,
    I use the next code when a user clicks on a link:
    private function clickHandler():void
          ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
          navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
    This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
    How to stop Flex performing the next code when a user clicks on the Cancel button?
    Or, how to catch which button is clicked by a user in Flex?
    Thanks!

    I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
    Show the Alert like this:
    // show an alert with a question and yes and no choices
    Alert.show( "Would you like to go to the Adobe Forums?", "Question",
         Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
    Then handle the response in the closeHandler() function:
    protected function closeHandler( closeEvent:CloseEvent ):void
    if( event.detail == Alert.YES )
         navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
    else if( event.detail == Alert.NO )
         // they chose no
    The following documentation on Alerts may be helpful:
    http://www.flexafterdark.com/docs/ActionScript-Alert
    Let me know if that helps...
    Ben Edwards

  • How to create combobox to display more than one columns

    I need kind help with the following question. As the combobox includes two pieces--textbox and the combobox list. Then how to create a combo box bean, which is based on table EMP(empno number(6), ename varchar2(40)) records for example, to achieve these features:
    1) allow more than one columns to be displayed in its records list--e.g., I need to show these records:
    empno (value) ename (label)
    103 David M Baker
    104 David M Baker
    105 Kelly J Volpe
    106 Krista F Carpenter
    107 Michelle P Silverman
    The two 'David M Baker's are different employees, but unfortunately, with the same name.
    2) allow combo box list to return the column value 'empno' even though it shows both columns as above. i.e., if user picks the second record above, then the combobox list returns 104 to the textbox in the background, but the 'David M Baker' is displayed on the textbox. Of course the combobox list may return 'David M Baker' if needed when there is only one column in the list as the current standard feature.
    3)allow partial match search by typing in some letters. i.e., if user types in the textbox of the combobox letter 'K' or 'k' then the partially matched records
    105 Kelly J Volpe
    106 Krista F Carpenter
    should be automatically displayed in the combobox list, not the whole list as above; then user may double click to choose one of the two or if user continues to type in 'R' or 'r', then the uniquely matched record 'Krista F Carpenter' is displayed in the textbox and the 106 is returned to the textbox.
    4) as a bonus if it's doable, allow combobox to return values to different textboxes when its records list has more than one columns.
    The reason I need these features is that I am working on the project migrated from Microsoft Access applications to centralized Java version web application. We at beginning promised to users community that Java swing will provide all the GUI user friendly features Microsoft Access has, but now we got stucked--we ate our words and got tons of complains from our users community. This is just the most needed component I posted here. I really hope that Java would add all the default GUI user-friendly features to compete with MS since its Win95 GUI has been accepted as industry standard. And most users are used to it. They claimed that they don't know and don't care what tool you use the newly created application should be more user friendly, not the opposite.
    I would be very much appreciated if any one would help me with this item.

    Thanks for your comments. I think nobody expects Sun to write everything including special features for its components. But I do think Sun should provide at least those standard user-friendly features for the GUI components because most users have been used to the GUI user-friendly features provided by Win95 and Access/Excel applications. Then this will help us to productively create applications to beat MS applications.
    Other wise like me, to get the existing GUI features, existed in old MS Access application, for our migrated Java application, I must re-create the GUI components library first which is a big burden to me at least, for others it might be fun for coding on their own from scratch, but I have to focus on the timing of project.
    If you really can pass the request to Sun and push them move a bit, please pass these words: before Sun starts to revise them, please play around window GUI, e.g., Access/Excel applications, then plan what to do, the bottom line is to equally match or better than them in FUNCTIONALITY(Look and feel is not my focus here). Don't ignore the influence of Windows regardless of you hate it or love it, the reality is most users are so familiar with windows GUI features which are accepted as industry standard. Thus the choice is to match or better to beat them. Don't make your car by closing your door, don't assume users will like what you come out in a closed room.

  • How can I restore the library & files that were previously on my Nano?

    Here's what happened... I hooked the Nano up to my computer at work to listen to it & charge it, but could not click on any of the music. Somehow I ended up with a prompt to "update the library" with a "yes" or "no" choice. I thought updating the library meant that the files on my Nano would create a list on the work computer's empty library so that I could play the files from my Nano. I did not expect it to transfer any files!!!! There was NO WARNING THAT IT WOULD ERASE INFORMATION!!!!! What then happened was horrible. The empty library on my work computer overwrote my Nano!!!!!! So now I have lost all of my files that I was planning to listen to on my flight to Spain tomorrow. I have been searching desperately to try to restore the files on my Nano, but have not been able to find an answer. I was planning to learn Spanish from the files on my Nano during my flight there! Now the Nano has wasted the money I spent on the Spanish CD's, the Nano and the ridiculously expensive & numerous separate accessories! This incident has really made me hate the Nano (which was given to me as a Christmas present). It has caused me nothing but pain & expense in buying junk for it and now trying to recover files without any good information on the Apple website! Why????? I thought Apple was user friendly before this Nano!

    I'm sorry that you didn't read the manuals but that's the way it works:
    Copying songs from your iPod to your computer
    "The iTunes library on your computer holds all the songs you've encoded from your CD collection or purchased from the iTunes Music Store. With default settings, iTunes automatically copies the songs in your library to your iPod. When you use your iPod as a hard disk, you can't see the songs iTunes copies to your iPod in the Finder or My Computer. This is normal. Using the Finder or My Computer, you can't copy these song files from your iPod back to iTunes or to any other computer. The synchronization between your iPod and your computer is always one way: from iTunes to iPod.
    If you've erased the music library on your computer, there's no way to use the Finder or My Computer to copy the songs from your iPod to reconstitute the library on your computer. One solution is to encode the songs from your CD collection again, then sync your new library with iPod. If you purchased songs from the iTunes Music Store and didn't back them up, there's no way to download them again. You'll have to buy new copies of the songs."
    Taken from Using your iPod as a hard disk
    Regards
    Colin R.

  • Can you create a If, then [Show DropDown List] If not [Show 2, Person or Group look ups fields]??

    Hello I am tying to learn SharePoint at a "Throwing you into the Lions with a toothpick" way. I can create  basic columns and work in SharePoint designer fairly OK. Now I am trying to update one of my list with the following and I cannot seem
    to know how to start this off. I am looking for a way to learn it and not have the answered provided to me. So if it can be done in SharePoint all I need is guidance and I will trek and learn what I need to make it work. 
    This is what I have in mind see if its possible:
    If column "Do you like beer" (Yes/No) = yes
    Then display (Choice) Drop down list 
    20 options 
    Mandatory Field, must select one
    If not then show (Person or Group) 2 fields
    Name of beer = [Enter Beer Name]
    Maker of beer = [Enter Beer Maker]
    Mandatory field

    Hello Matrixwolf,
    As i understand you want to show column based on selection in list. You can use Jquery/javascript to hide/show column based on selection and also use Jquery to make those fields mandatory.
    Before you begin just remember that "Person or Group" only use to select people OR sharepoint group (as you mentioned in 5 point) so you may use simple text column to capture those details.
    Here is some ref links for jquery implementation:
    http://www.sharepointnadeem.com/2013/09/sharepoint-showhide-list-column-based.html
    http://bingggg.blogspot.sg/2011/11/showhide-columns-based-on-drop-down.html
    Your should be:
    1. Create columns in list as per your requirement
    2. Then open newform.aspx and editform.aspx pages, and use content editor webpart on that page to use jquery.
    You can search on Bing/Google about content editor webpart and its uses.
    Another way, you can modify the list form infopath designer and use infopath rule to hide/show the column.
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How to stop the new health application from Count the steps/ woking background?

    how to stop the new health application from Count the steps/ woking background?
    I really need your help

    I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
    Show the Alert like this:
    // show an alert with a question and yes and no choices
    Alert.show( "Would you like to go to the Adobe Forums?", "Question",
         Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
    Then handle the response in the closeHandler() function:
    protected function closeHandler( closeEvent:CloseEvent ):void
    if( event.detail == Alert.YES )
         navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
    else if( event.detail == Alert.NO )
         // they chose no
    The following documentation on Alerts may be helpful:
    http://www.flexafterdark.com/docs/ActionScript-Alert
    Let me know if that helps...
    Ben Edwards

Maybe you are looking for