Standards for XML

Hi,
Like we have ANSI standard for EDI
for example EDI 850 for a P.O. or S.O.
do we have any standards for XML transcations.
Where can I get them?
I appreciate any help.
Thanks

hi,
IDOC-XML
BTW
>>>>xCBL for e-commerce
xCBL is a whole set of documents - like orders etc.
I don't see any reason why it could not be used for FMCG companies
(from the business document types point of view)
>>>>xBRL for Insurance Industry
this one is not only for insurance it's more for XML reports
(I believe it's consortium also holds government agencies for example)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

InDesign CS3 Server - Support for Standard ECMA-357, ECMAScript for XML (E4X) Specification

Does InDesign CS3 Server fully support the XML standards outlined by ECMA in 'Standard ECMA-357 ECMAScript for XML (E4X) Specification'?
http://www.ecma-international.org/publications/standards/Ecma-357.htm

Thanks Michael, for your prompt reply.
I can see that some of the XML library/functions are available in the ExtendScript Editor - but I just wanted to make sure that I'm not missing something.
Thanks again,
Carl

XML Standard for B2B Integration

Hi B2B Gurus-
One of our client is looking at implementing a B2B solution using Oracle B2B to send and receive business documents with its Trading Partners (Suppliers and Banks).
The typical transactions as of now would be:
1. Purchase Order Outbound to Trading Partners
2. Advances Shipment Notice and Invoice Inbound from Trading Partners
3. Payment Files Outbound to the banks
The client will not be using EDI or Rosettanet standards. They are looking for XML standards ONLY.
I understand that Oracle B2B supports cXML, xCBL, ebXML, OAGIS etc
Can anybody please suggest which XML standard is the best for the above mentioned B2B transactions.
Please note that the back-end ERP system in our case is Oracle E-Business Suite R12.
Thanks in advance.
Regards,
Dibya

Hello Dibya,
RoesttaNet is a XML based standard but if I am right then your client does not want to use it.
Deciding a document protocol in B2B communication is mutual agreement based process between the trading partners, so I think your client should first check with it's TP's that which document protocol they would prefer.
Still if I have to give personal opinion, then I would go for ebMS because it has support for SOAP standard using which you may even connect with web-services of your TP (if they do not have a B2B product). Moreover, I can define my own message structure in ebMS (obviously with my TP's ack) and have CPP/CPA import functionality. There is also a PING-PONG message facility in ebMS to test connectivity between TP's. Apart from this there is also ActionName based agreement identification support for ebMS.
I would suggest you to ask your client to discuss it with their TP's and then take a decision.
Regards,
Anuj

Good Books for XML/XSL

Hi Can any one suggest me good books for
learning XML/XSL. I am new to XML. any help is appreciated
Arun

There are many excellent articles, whitepapers, and books that describe all facets of XML technology. Many of these are available on the world wide web. The following are some of the most useful resources we have found:
XML, Java, and the Future of the Web by Jon Bosak, Sun Microsystems http://metalab.unc.edu/pub/sun-info/standards/xml/why/xmlapps.htm
XML for the Absolute Beginner by Mark Johnson, JavaWorld http://www.javaworld.com/jw-04-1999/jw-04-xml_p.html
XML And Databases by Ronald Bourret, Technical University of Darmstadt http://www.informatik.tu-darmstadt.de/DVS1/staff/bourret/xml/XMLAndDatabases.htm
World Wide Web Consortium (W3C) XML Specifications http://www.w3.org/XML/
XML.com (a broad collection of XML resources and commentary) http://www.xml.com/
Annotated XML Specification by Tim Bray, XML.com http://www.xml.com/axml/testaxml.htm
The XML FAQ by the W3C XML Special Interest Group http://www.ucc.ie/xml/
XML.org (the industry clearing house for XML DTDs that allow companies to exchange XML data) http://xml.org/
xDev (the DataChannel XML Developer pages) http://xdev.datachannel.com/
Oracle XML Team
null

Industry Standards for the Retail Industry

I want to know " SAP recommends which of these Industry Standards for the Retail Industry?
1.GS1
2.ANSI ASC X12
3.eCOM
4.GSMP
5.EPCglobal
6.GDSN
7.GCI
8.VICS

SAP has avoided making any recommendations. I specifically asked one of their architects a similar question a couple of weeks ago.
In general the X12 and EDIFACT standards are king within the retail industry. Within the United States X12 has been the default standard for many years and is used by all the giants. Within the European Union EDIFACT is the default standard and is used by the vast majority of retailers. However the UK has a standard which is called Tradacoms. In my experience UK retailers have, when pushed, also offered EDIFACT messaging. It should be noted that these formats are not XML. However many XML convertors exist for them. X12, EDIFACT and Tradacoms are what are commonly referred to as Traditional EDI.
The GS1 standard called eCOM is being increasingly adopted. I do know that Accenture and CapGemini have recently been heavily involved in promoting GS1 and eCOM. This is because eCOM standard is realistically the most heavily backed replacement for the Traditional EDI standards. The several of the largest US and European retailers and manufactures are now throwing their weight behind eCOM.

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error for fetching long text in xml tag for xml publisher report

My requirement is to fetch a large document which is in text format in XML output which can be printed in PDF format by using RTF method to generate PDF.But during XML ouput i got the following error-
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
The following tags were not closed: XXBG_EAMWRREP_V1, LIST_G_WO_ACTIVITY_CODE, G_WO_ACTIVITY_CODE, LIST_G_MEDIA_ID1,
G_MEDIA...
XXBG_EAMWRREP_V1 is the rdf and LIST_G_WO_ACTIVITY_CODE, G_WO_ACTIVITY_CODE, LIST_G_MEDIA_ID1, G_MEDIA are the groups name. In the group
G_MEDIA i am fetching long_text from attahcment in application. In Database table the datatype of the text attachment is 'long' and there is a huge text
data loaded in large data editor of that column. If the text data volume is small enough then there is no problem for fetching the xml output.
If we change the output format as HTMl then there is no problem for fetching the output for long text but for xml output format we are unable to fetch the data
in xml tag.
One thing to mention the oracle report is the copy of Maintenance Work Order Detail Report. The seeded report is HTML format in 11i. The requirement is to make it in xml report.
Please help.

Hi,
Actually clob datatype is not available in oracle report builder datatype lov. Could you pls tell the other ways of converting that to clob in oracle report...

FO processing for XML Publisher Report Bursting Program

Hello,
I am facing the following problem: if i try to burst a report using XML Publisher Report Bursting Program special characters like (ş,ţ,ă, etc.) in the resulting PDF look strange. I have tried running the report without bursting it and the characters appear just fine (after i've set the FO Processing Font Mapping). My guess is that XML Publisher Report Bursting Program is not using the right font mapping. Have you faced this problem before? Do you have any idea how to set the right font mapping for XML Publisher Report Bursting Program.
Thank you.

So the answer was to make sure the location in the bursting file (location="xdo://schema.template_code.en.US) exactly matches the language/country setting in the uploaded Definition. Then make sure the fonts have been added to the xdo.cfg file matching what your Font Mappings are:

<truetype path="/app/erp1/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIA.TTC" />


<truetype path="/app/erp1/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIAB.TTF" />


<truetype path="/app/erp1/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIAB.TTF" />


<truetype path="/app/erp1/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIAB.TTF" />

Getting OPP LOG Error for XML Publisher report

Hi Experts
We are facing warning message for Xml Publisher report please advise how can we avoid this warning message.
{code}
Post-processing of request 12345678 failed at <sysdate> with the error message: The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status. Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary
{code}
We have increased the Profile value for
Concurrent: OPP Process Timeout from 120 to 240 still we are facing the issue even we have stop and restart the OPP for the change to be implemented but no luck please advice me
Thanks
AT

Hi,
Please see the following notes:
The Output Post-processor Is Running But Has Not Picked Up This Request. (Doc ID 1547102.1)
Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
Report Output Error: The XML page cannot be displayed. Cannot view XML input using style sheet. (Doc ID 753620.1)
Output Post Processor (OPP) Manager Not Working Error: APPLTMP Environment Variable is not Set (Doc ID 1381474.1)
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
Thanks &
Best Regards,

Getting OPP Error for XML Publisher report

Hi Experts
We are facing warning message for Xml Publisher report please advise how can we avoid this warning message.
{code}
Post-processing of request 12345678 failed at <sysdate> with the error message: The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status. Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary
{code}
We have increased the Profile value for
Concurrent: OPP Process Timeout from 120 to 240 still we are facing the issue even we have stop and restart the OPP for the change to be implemented but no luck please advice me
Thanks
AT

Hi,
Please see the following notes:
The Output Post-processor Is Running But Has Not Picked Up This Request. (Doc ID 1547102.1)
Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
Report Output Error: The XML page cannot be displayed. Cannot view XML input using style sheet. (Doc ID 753620.1)
Output Post Processor (OPP) Manager Not Working Error: APPLTMP Environment Variable is not Set (Doc ID 1381474.1)
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
Thanks &
Best Regards,

Unable to locate Spring NamespaceHandler for XML schema namespace

I am not sure if this is the best practice approach but this is the problem I am ruining into. Below, I explain what I am doing:
1) What I am doing:
=============
Based on the oracle incubator example (http://coherence.oracle.com/display/INCUBATOR/Processing+Pattern+Examples); I am running a server and submitting tasks through a proxy application that submits them to ProcessingPatternConfigurator; let's call my task processReport.
a) my processReport is using spring and ibatis together, I created a utility static class to obtain a spring context and retrieves beans using the following lines ( see exhibit "A1 and A2" below).
b) when my task calls the context and that spring loads, it is failing with the error show in exhibit "B".
I suspect I am missing a lib? I googled the error and searched you site but could find a meaningful discussion on it. I guess my question is if this is not the best approach, how do I integrated with spring initializing beans and setting up ibatis framwork, providing beans and database access through Ibatis for each task ruining on the grid (processReport).
thanks
A1) processReport (submitted in the grid) uses this line
AbstractXmlApplicationContext ctx = (AbstractXmlApplicationContext) AmrContextUtil.getInstance();
 System.out.println("Classpath loaded. Executing Report...");
 ReportProcessor repProcessor = (ReportProcessor) ctx.getBean("reportProcessor");
A2) Here is the AmrContextUtil:
import org.springframework.context.support.AbstractApplicationContext;
import org.springframework.context.support.ClassPathXmlApplicationContext;
public final class AmrContextUtil {
 private static AbstractApplicationContext ctx = null;
 public AmrContextUtil() {
 super();
 public final static synchronized AbstractApplicationContext getInstance(){
 if (ctx == null){
 ctx = new ClassPathXmlApplicationContext("classpath:config/applicationContext.xml");
 setCtx(ctx);
 return ctx;
 public final static synchronized AbstractApplicationContext getCtx() {
 return ctx;
 public final static synchronized void setCtx(AbstractApplicationContext ctx) {
 AmrContextUtil.ctx = ctx;
B) Here is the error reported by the server:
2010-02-10 15:42:28.312/57.986 Oracle Coherence GE 3.5.2/463 <Warning> (thread=GridExecutor:Thread-2
, member=1): TaskRunner - Failed to process 0x00000126B99E5524AC1F007AAB1587BBCFEC5E6637E1DED6CCB984
03D6AADF4D due to:org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Failed to import bean definitions from URL location [classpath:config/reports-application.xml] Offending resource: class path resource [config/applicationContext.xml]; nested exception is org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Unexpected failure during bean definition parsing
Offending resource: class path resource [config/reports-application.xml] Bean 'reportSqlMapConfig'; nested exception is org.springframework.beans.factory.parsing.BeanDefinitionParsingException: *Configuration problem: Unable to locate Spring NamespaceHandler for XML schema namespace [http://www.springframework.org/schema/util]*
*Offending resource: class path resource [config/reports-application.xml] Bean 'reportSqlMapConfig'*
-> Property 'resourceMap'
c)Here is my application-context.xml offending line:
<bean id="reportSqlMapConfig"
class="com.xx.report.generator.ReportSqlMapConfig">
<property name="resourceMap">
<map>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.FPA"/>
</key>
<value>classpath:config/diehardReportSqlMapConfig.xml</value>
</entry>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.FCN"/>
</key>
<value>classpath:config/falconReportSqlMapConfig.xml</value>
</entry>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.ODS"/>
</key>
<value>classpath:config/odsReportSqlMapConfig.xml</value>
</entry>
</map>
</property>
</bean>

My guess is that something is broken in the configuration of the cacheServer and its not finding
all of the dependencies that your process pattern application needs. Probably the best way
to debug this stuff is to define a static main in your runnable task which will make the call
to the run() method and invoke it as the main class using the identical settings (classpath,
run directory) that you are using to launch the Coherence cache server.
Regards,
Bob

How to use useMaxValue property in ODI for XML?

Hello All,
I am using 11.1.1.5 version of ODI. I want to use "useMaxValue" for which description is given as follows by oracle.
When this property is set to true, elements for which maxOccurs is not specified in the XSD are considered as maxOccurs ="unbounded". Otherwise, the driver assumes that maxOccurs=1 when maxOccurs is not specified.
when I use this property as useMaxValue in the JDBC url for XML technology I get the following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source XML connection XML FILE.
Caused By: java.sql.SQLException: ODI-40717: Unknown parameter : usemaxvalue
I am trying to get multiple records for the same elements in XML for this I am using this property. Is there any other way to get it done?
Thanks in Advance!

please try uimv or useimplicitmaxvalue. I justed tried, both works well. I will file a doc bug to track the issue, maybe document need change, maybe code, waiting bug updates.
Edited by: tina.wang on Oct 7, 2012 9:28 AM

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?
Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
Would anyone be able to help me?
Or how can I get in touch with Adobe themselves?
How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
Cheers!!! Thanks a million! Any help is welcome!!!!

Make sure you have cookies enabled and clear your browser's cache before you try downloading. If it continues to present that error try using a different browser.
As far as getting to a chat link goes, it can be hit or miss... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

Can i get a new serial number for Adobe CS6 Design Standard for Students and Teachers?

I have had to re-install my Adobe CS6 Design Standard for students and teachers after having problems with my computer (MacBook Pro)
I am wondering if there is a way to access my old serial number from when I originally installed CS6, or do I have to start over again and get a new serial number?
Help is greatly appreciated!!

You normally use the same serial number that you are first issued. If you registered your product when you first installed it then you should be able to find your setial number available thru your Adobe account online.

What should i put in Schme while creating Data server for XML

I am new to XML and ODI also.
I was trying to create a data server for XML technology.
I don't know what should i specify as a schmea in JDBC URL.
e.g. jdbc:snps:xml?f=../demo/xml/1/file.xml&ro=false&ldoc=true&case_sens=true&s=LEO_FIZ&dod=true
here schema is LEO_FIZ, so my doubts is LEO_FIZ is a database schema or what ??
Please help me out.

The schema referred to here is going to be used by the XML driver for the instantiation of the temporary schema used for the xml data. It can be any name, I recommend you keep it short, as if you use an external database for the XML data instantiation it is used as a part of the "table" names.

Standards for XML

Similar Messages

Maybe you are looking for