StandardView button is being selected in the ribbon even user clicks on Datasheet view of a library created using custom template.

Hi,
We have an issue with one of the library created using custom library template. Eventhough user selects Datasheet view from the ribbon it's showing Standard view button as selected. However content is being correctly in the grid view. Can some one help me
in sorting this issue.
NB: Functionality is working as expected with library created using OOB document library template.
In the above screen shot Datasheet was selected.but Standard View was highlighted.
Is that something should be done in schema.xml file?
Thanks,
Venugopal

Hi Venugopal Pulagam,
This seems a weird issue, based on my understanding, it is not caused by SharePoint. I haven’t seen that there is settings in list instance schema file can effect this to happen.
To narrow down this issue, would you please check whether this can be reproduced in other type of browser?
And as this only happens for this specific library, please create a new list based on the template, check the result.
How you create the list template, please share the steps to reproduce the issue.
Thanks,
Qiao Wei
TechNet Community Support

Similar Messages

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

How can i do this in Captivate 7 "The idea when user click on "Correct answer" button, drag source m

How can i do this in Captivate 7 "The idea when user click on "Correct answer" button, drag source move to drop target automatically".

I suppose you are talking about the D&D interaction? Could you explain more? What is your level of expertise with advanced actions and Effects?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

By API action, how can I get the list of user IDs within a specific group (which is created by API) ?

By API action, how can I get the list of user IDs within a
specific group (which is created by API) ?
or How can I get the group (which is I create by API) ID to
which a specific user belong by API action?
Thanks
Alex

The poster already posted at the Acrobat Users Community, Interactive Forms that sums up a client order from catalog. The sample form posted to Acrobat.com was a revision of the sample form that came with Acrobat 4.0. There are some fairly advance scripts, templates, and document level functions involved with this form.

[Flex 4.5.1] How to prevent Radio Button from being selected when clicked on? No Changing Event?

I have a very common use case where you have a few radio buttons and only one can be selected at a time. Some of them are basic and on click should be selected right away, but other are more complex and open a pop up which requires some additional user selections after which the user selected OK or CANCEL for example and only after that the selection of the radio button should be applied programatically.
So to solve this issue I've come up with 2 workarounds:
1) make the entire group, that holds the radio button, act as a button with buttonMode="true" mouseChildren="false" and programatically change the radio button within it.
2) hold the current radio button selection in a variable and in the changeHandler of that radio button return the selection back to what was selected before. But this also causes a small flickering of the radio button which gets selected and deselected immediately after that.. not cool.
So my question is... is there something I am missing that could do the job without these workarounds... like a Changing event which I use for the ButtonBar but I can't find on the RadioButton or RadioButtonGroup... thanks!

Hi,thanks for the reply. Actually that was my third option, but not sure if it's very good also..
Here is a simple scenario:
User must select between 2 radio buttons:
1) no volume -> sets variable volume=0 and selects the radio button (that is the normal use case)
2) set volume -> opens up a pop up with a list that has a X button to close and 4 options: 25% volume, 50% volume, 75%, 100%
At this point the set volume radio button should not be selected and the user has 2 choices:
-> hit the X button to close - nothing changes and no volume radio button is still selected and volume is still = 0
-> hit one of the volume % buttons -> the set volume radio button gets selected and the variable volume=25/50/75/100 depending on the button selected by the user.
That's a pretty common scenario and it's bugging me that I can't easily alter the radio button selection logic since whenever I click it, it gets selected and I can't put a logic in between in a standard way. This should apply to any component with selection, just like ButtonBar has it with the Changing event.
So is there any other more convenient way to accomplish this scenario that you could recommend?
Thanks!

CS5 won't select brushes the first time I click on them

Hi,
I'm having some trouble with picking brushes to use in CS5. The first issue is that when I scroll through the different brushes available, if I hover over one for too long (in order to make the alt text with the brush's name show up), the brush selection will jump back to whatever I had selected previously, and I have to scroll through again to get back where I was. The second issue is that when I click a new brush I want to use, then move my cursor to the canvas, the brush resets itself to whatever I had selected previously, and I have to go back and reselect the new brush. (Sometimes more than once.) It's really messing up my work flow...
Does anybody have any idea how to make Photoshop actually select the brush I click on the first time I click it?
I tried reseting the brushes to the default, so that there weren't so many (I've downloaded quite a few) but this didn't help. I also tried restarting Photoshop. The problems are still happening.
For the record, I am using Photoshop CS5 on a Mac running OS 10.6.8. I'm using a Wacom tablet but also the computer's touchpad. The problem seems to happen whether I control the cursor with the touchpad or the tablet.
Thanks for your tme!

Unfortunately I'm still having the brush selection issue even after doing this. (Though it did fix some other things that had been frustrating me, so thank you!)

Selection screen to appear when user clicks on radio button

hi
i have severla radio buttor in a radio button group
i want that whne user clicks on first radio butter selection scren 1 eg as below to apper
when use clicks on radio buton2 selection scree2 will appear please suggest
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE
text-008
PARAMETER : fyr2_fy type FIMC-RYEAR default 2008,
fyr2_cg type FIMC-CGYEAR default 2008,
fyr2_bk type FIMC-PERID default 7.
SELECTION-SCREEN END OF BLOCK B1.
regards
arora

Hi,
At selections screen on that radiiobutton group.
if radio_button1-status = 'X' (Active)
call screen 'scereen number' or set screen 'nuymber'.
else.
call screen...
endif.
Reward if helpful.
Best Wishes,
Chandralekha

Importing modified Bug WIT does not refresh the template in TFS 2013 for the project created using Scrum Template.

Hi,
We have a TeamProjectA created in a collection using ScrumTemplate 2013.4. I have added a new State 'Duplicate' in the Bug WIT and modified the workflow. Also the ProcessConfiguration file is modified to match the metastate and imported using the ImportWit
Commands which were successful. When I Export the modified WIT using Process Editor for TeamProjectA I can see the Bug.xml has my changes. However, when I try to create a new Bug through TWA, I do not see the new State'Duplicate' that I added.
I dont see my changes are updated in the common configuration files Path ie C:\\Program Files\Microsoft Team Foundation Server 12.0\Tools\Deploy\ProcessTemplateManagerFiles
Note: I have a different TeamProjectB created using the Agile template created under the same Collection as my other TeamProjectA. Not sure if this has anything to do with my problem.

Hi NetLearuner15,
Thanks for your reply.
If you want use witadmin command on your TFS Server machine, you need install VS 2013 on your TFS 2013 Server machine.
Have you tried create new Bug using VS? The new added state value shows correctly in VS or cannot see it in VS too?
You’re using TFS 2013 Update 4 and VS 2013 Update 4?
Yes, you can restart your TFS Server and check the result.
And we suggest you add a new custom field in your Bug_Test work item type(Fields and Layout) or only edit a default state value in it using Process Editor, then save this Bug_Test work item type and check if this new update shows correctly when you create
a new Bug_Test work item from TFS Server. If the new field or changed state value can be updated correctly in your TFS Server, I think your initial ‘Duplicate’ state value not defined correctly in your Bug WIT>>workflow.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I Would Like To Access And Add To My Library. I Am Logging On To Multiple Users And DownLoading The Content, But I Am Unable To View My Complete Library From One User To The Next.

I Would Like To Access And Add To My Library. I Am Logging On To My Account From Multiple Users On A Computer And Am Not Able To View My Complete Library When I Change Users.

tHE lIBRARY iS iN yOUR uSER aCOUNT.

OIF-What's the diff. from user's point of view of SP/IdP initiated SSO

I'm using OIF for federated single sign on. I got both the SP and IdP initiated SSO works. When I provide both URL to customer, how should I suggest which one to use? from end user's point of view, both of them works in the similar work flow: type(click) URL -> redirect to IdP's login page -> login -> return back to application. only diff. seems the URL. most of user even did not notice the diffrence between 2 URLs.
Could some give some suggestion when and which one is preferred.
Thanks

Probabaly. however, in our case, the application url, e.g. http://appurl is used for non-federate sign on. so that the applicaiton can be run independent of IdP, e.g. IdP down.
To allow federate sign on, we use one of following (as documented in OIF admin guide):
SP initiated:
http://SP host:port/ fed/sp/initiatesso?providerid=<SP provider Id>& returnurl=<http://appurl>
IdP initiated:
http://IdP host:port/fed/idp/initiatesso?providerid =<IdP provider Id>& returnurl=<http://appurl>
So, you can see these does not support bookmark of federate sso since they would return back to http://appurl after federate sign on.
Any suggestion? we couldn't tell good diffrence about above urls to our customer. is there anyway to allow us enable bookmark the federated sso?
Thanks

How do I stop all the text being selected in the Google search box when I click in it? I just want the cursor to be placed where I click so I can edit the search field.

If I want to select the whole field I am happy to double click, or tab into the field. More often though I want to refine my search, or correct a spelling mistake.

Click twice to get the blinking cursor.

I have an Ipod classic 30 GB U2 , it s been working fine for the past 3-4 years until now it starts to get stuck when navigating the menu or even when clicking something,Basically i am only able to use it as a storage device not its ipod features

It is recognized via Itunes as IPOD and i am able to connect it through USB cable to the pc and manage its physical memory via My Computer. But the problem is I cannot use anything on it as an IPOD (Like Music video and note stuff inside it).It boots as saying its got low battery power and after a while "Do not disconnect" logo appears after it is charged, i am able to operate it as normal ipod but when i click something it gets hanged like a PC and it stays there until the battery is too low . No matter what button i press (Menu or play buttons) continuously or the combination to restart or reset its in the same static state,,no reaction...even when i connect it to the pc via USB or charger nothing happens ..it stays in the same screen whereever i navigated last. After all its power is used up the same process continues that i can use it as an external hard disk namely its 20 GB memory...
Is there any way I can solve this problem via Itunes restore or any other used method to restore it to factory settings ?? ...I haven't used any method to restore it until now as i have migrated to IPAD,,,since then i've been using this as an external hard disk....may be if its restored to old condition i can carry this where ever i want unlike the massive IPAD...its like carrying a solar panel unlike an handy IPOD

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

After selecting "Never remember history," and "OK," re-opening options reveals it has reverted to "Use custom settings for history."

Problem occurs with all add-ons disabled, and in safe mode.

Thank you cor-el for your reply. To clarify for any other followers of this post: I found that if I first selected "Remember history" (apparently synonymous with "Default settings") and "OK," then reopened the Options pane and selected "Never remember history," it would stay selected. This seems like a bug to me however, since there is already a selection for single-session Private Browsing in the "Tools" pull-down menu, and it is simply not intuitive that a setting once selected would revert to any other setting simply because you re-opened "Options." This will result in many users who are not paying close attention using settings which they do not intend to use regarding their privacy. This is the sort of thing I expect from Microsoft or Adobe, but not from Mozilla.

When i click on exe the thing loads to the task bar and will not go to the desktop the desktop even after clicking on

when i click on the firefox exe it loads my home page but will not load to the desktop it stays in the task bar and when i put the cursor over it i can see the the page is loaded but when i try to get it to pop onto the desktop nothing happens uninstall it an did a reinstalled same prob did a repair same problem did a system restore and sill no desktop having to use google chrome and i hate it'''bold text'''

Alright, well let's try this then.
Restart your computer. After you restart your PC, let's try starting Firefox up in Safe Mode. Read [[Safe Mode|this article]] to see how to start in Safe Mode. If Firefox starts up normally, then this is likely a problem with your extensions, so we will need to disable them one by one (or disable them all and re-enable them one by one) to figure out the offender.
Another thing is please update to Firefox 11 (go to [[www.getfirefox.com|www.getfirefox.com]] to download it since you can't get Firefox open to update). It does have some bug fixes that might help your problem.

StandardView button is being selected in the ribbon even user clicks on Datasheet view of a library created using custom template.

Similar Messages

Maybe you are looking for