Standby button is recessed after taking it out of a regular case?

i just recently took my iphone out of its case (a rubberized skin) and i noticed that the area where the standby button is is totally flat. the button is there, but pressed all the way into the iphone. its totally flat now. i can still press the button, but i have to press harder and it hurts my hand. hopefully taking it into the applestore tomorrow to exchange it. anyone else have these problems?

This is a common issue with these phones...you may have luck getting genius bar to replace it but it depends on the tech...some will agree it's a defect some won't...
Good luck

Similar Messages

IPhone stolen less than 24 hours after taking it out of the box

Hello,
Thursday night I took my brand-new iPhone 4S out of its box. Later that night, I was out with a friend at a bar. Someone must have seen me using it at some point during the evening; . I was ambushed in a bathroom stall, assaulted and had my phone stolen. The guy took off running and I wasn't able to catch up. He also took my debit card and liquidated my checking account.
The phone was unlocked, purchased directly from Apple. I'm desperate for help. Since it happened around 2:00 A.M. Friday morning and I spent all day at the police station and in touch with my bank regarding my debit card, I didn't have time to dial Apple before it closed to report the theft. I am absolutely going crazy over this. I used my credit card to purchase the phone, it cost me almost 600 euros and now it's gone, being used by someone who literally attacked me in a bathroom stall for it.
I tried registering it under my Apple ID with the serial number but it says it's been registered to another ID already. I didn't have time to activate the Find my iPhone feature (I literally had it for about eight hours)—does that mean it's just over? There's no chance of getting it back?
Is there anything Apple will be able to do? If the person who stole it has registered it to his Apple ID, then theoretically Apple would know who he is, wouldn't they? Can't they turn this information over the authorities?
Would they give me a new phone? Or a discount on another one? I just can't believe this is happening to me. I know it's just a phone but I didn't even have it for 24 hours and 600 euros is a lot of money for me. I'm beyond depressed about this.
RMBetencourt
Madrid, Spain

Apple can't do anything about it. They are not a law enforcement agency.

Boxes are not printing after taking print out

Dear All,
i have developed a script ,which contains some rows and columns.To display rows and columns i have used BOX command.In print preview all boxes are coming properly,but if i take Print out(Even in PDF view also) some boxes are not printing.What would be the problem here?
with regards
Naresh

Hi friend,
There must be some problem in printer settings
or
Try reducing the size of the box and see because of the size also printer may avoid the boxes.
Just try these both i think either one of the both must be a problem.
Still did not get the desired output please revert back to me. I will help you.
Thanks,
Sri Hari

I have a iSight iMac model which doesn't work but it is not the HD. How can I transfer the data on the HD to another computer or external HD after taking it out of the non-working computer?

If I take the HD out of the computer, is there any hardware/software combination that will allow me to transfer the information on the HD to another computer or to another external HD?

If it is not the HD, what part is not working?
You can put the HD into an exclosure and transfer data via either Firewire or USB2

Disable page display when back button is pressed after logout

hi,
I dont want the old pages to appear once the back button is pressed after loggin g out. That is .... when logged in, if the user presses back button then his previous pages must be shown....but once the user logs out and then if he presses back button then some message like session has been closed....like message should be displayed.
Hope you understood the problem

If you expire a page then back button will not take it to the previous page.
expire is a HTTP-EQUIV meta tag in the header of the page. You can set the content to some time in the "past" when serving the page first time.
Expires
This tells the browser the date and time when the document will be considered "expired." If a user is using Netscape Navigator,
a request for a document whose time has "expired" will initiate a new network request for the document.
An illegal Expires date such as "0" is interpreted by the browser as "immediately." Dates must be in the RFC850 format, (GMT format):
<META HTTP-EQUIV="expires" CONTENT="Wed, 26 Feb 1997 08:21:57 GMT"> Hope this works for you, there are browser dependencies as well.
vr,
Sudhakar B.

I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
 Cheers, Tom

DV6915nr laptop won't turn on after taking out wireless card with it on

AFter taking out my wireless card from my laptop, with it on, my computer now won't turn on at all. No lights come on in the front at all? Did I fry my motherboard?? Help please thanks

you took the wireless card out while the laptop was switched on??

Cheque number changes automaticaly after taking the print out

Dear All,
The scenario is after taking the print of cheque the cheque number changes automatically.
Suppose the cheque number is 122222.
After printing it changes to 1,2 etc.
Why is it happening?
I am using SAP 8.8 PL 15.
Thanks & Regards-
Mona

Dear Mona,
Check this to see if relates to your question: Manual Check Number changes when checks for payment is printed
Thanks,
Gordon

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Flick when pressing standby button to turn on phone

All-
I have my iPhone locked with a PIN. Just recently after the v.1.1.1 update I have noticed when my phone goes into lock mode and I press the standby button to wake it up the screen flickers (goes on, off then on again). Has anyone else noticed this? Is this the norm?

I've got the same issue as well and can't figure it out. Clues anyone? Hoping that 1.1.3 should fix this...

Show my caller id button turns off after setting att

show my caller id button turns off after setting at&t, any help

Hi, try this method, it works for me on an iphone4 & 4S (iOS7)
make sure you have all apps closed before next steps.
-Go to Settings, Phone, Show My Caller ID. (if button is Greyed Out)
-Pull down Control Centre & Turn On Airplane Mode & return to Show My Caller ID screen.
-Now slide your screen from right to left taking you to another screen, then slide back to your Show My Caller ID screen.
-Now You Can turn ON or OFF your Caller ID Button.
-Lastly slide down you Control Centre again and Turn OFF your Airplane Mode.
Thats it Job done.
Please note, it will now stay in the mode that you have chosen(ON or OFF) even if you respring or reboot your phone. But if you return back to
Show My Caller ID screen, then you SIM Provider will automatically Disable your Caller ID screen BUTTON once again. So just repeat the steps
above and your be fine.
Hope this helps.

AFTER TAKING 60 PHOTOS ON MY T3I I SHUT IT OF AND PUT IT ASIDE. WHEN I TURNED IT BACK ONI GOT A ERRO

AFTER TAKING 60 PHOTOS ON MY T31,I SHUT IT OF AND PUT IT ASIDE.WHEN I TURNED IT BACK ON I GOT AN ERROR MESSAGE THAT SAID IT COULD NOT READ THE CARD AND TO TRY TAKING THE CARD OUT AND PUTTING IT BACK IN .THAT DIDNT WORK AND DID NOT HAVE ANOTHER CARD YET SO I REFOMATTED IT CARD AND OF COURCE LOST ALL MY PHOTOS.I HAVE A 8 G CARD SO IT WASNT FULL.WHAT MIGHT HAVE HAPPENED?

LLATTARULO,
There was likely corrupted data or incomplete data on the card. There are a couple possible causes, but since it has been resolved, it is hard to speculate what caused it. It may have been that the card had not been formatted in a long time or the camera had not finished writing the data from earlier to the card.
This error does not always mean that the images on the card are lost. Formatting can fix this, but you may want to try downloading the images from the card directly using a card reader before you format the card if this happens again. This will ensure you do not lose your images again.
It is also good practice to regularly format the card after you have downloaded all of the images from it. This keeps the card fresh and the file system as free from corruption as possible, greatly reducing the chances of seeing this error again.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Command link / button action is not taking place if i use it in iterator.

Hi,
I am new to ADF, i am facing 1 issue while implementing ADF mobile browser application.
Issue: command link / button action is not taking place if i use it in iterator. its just refreshing the page it self and displaying as no records.
Scenario is i am populating the search results in results page from search page using iterator, i want to get the complete details in different page (results page -> details page) .
I have tried in different ways.like
case1:
<tr:panelGroupLayout id="pgl2" layout="vertical" styleClass="af_m_panelBase">
<tr:panelHeader text="#{classviewBundle.SEARCH_RESULTS}" id="ph1"/>
<tr:iterator id="i1" value="#{bindings.SubjectVO1.collectionModel}" var="subject"
varStatus="subIndx" rows="100">
<tr:panelBox text="#{subject.Subject} #{subject.CatalogNbr} - #{subject.CourseTitleLong}"
styleClass="af_m_listingPrimaryDetails" id="pb1">
<f:facet name="toolbar"/>
<tr:table var="ssrClass" rowBandingInterval="1" id="t1" value="#{subject.children}"
varStatus="clsIndx" rowSelection="none"
binding="#{SessionBean.subjectTable}" verticalGridVisible="true"
emptyText="No Records" width="100%">
<tr:column id="c9" sortable="false" styleClass="width:100%">
<*tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"*
id="commandLink2" styleClass="af_m_listingLink"
*action="#{pageFlowScope.BackingBean.searchaction}"></tr:commandLink>*
//remaining code
in this case commandlink action is not able to invoke serachaction() method
case 2:
<tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"
id="commandLink2" styleClass="af_m_listingLink"
action="classdetails}"></tr:commandLink>
in this case its not able to navigate to classdetails page.
I gave correct navigation cases and rules in taskflow,but its working fine when the command link is out of iterator only.
i tried with actionlistener too.. but no use.. please help me out of this problem .
*Update to issue:*
The actual issue is when i use command link/button in an table/iterator whose parent tag is another iterator then the action is not taking place.
the structer of my code is
< iterator1>
#command link action1
< iterator2>
#command link action2
</ iterator2>
< /iterator1>
#command link action1 is working but "#command link action2" is not...
Thanks
Shyam
Edited by: shyam on Dec 26, 2011 5:40 PM

Hi,
To solve my problem I used a af:foreach instead.
<af:forEach items="#{viewScope.DataBySubjectServiceBean.toArray}" var="text">
<af:commandLink text="#{text.IndTextEn}" action="indicator-selected" id="cl1">
<af:setActionListener from="#{text.IndCode}" to="#{pageFlowScope.IndicatorCodeParam}" />
</af:commandLink>
</af:forEach>
By the way you need to convert the iterator to an Array using a ManagedBean.
public Object[] toArray() {
CollectionModel cm = (CollectionModel) getEL("#{bindings.TView1.collectionModel}");
indicators = new Object[cm.getRowCount()];
for(int i=0;i<cm.getRowCount();i++){
indicators[i] = cm.getRowData(i);
return indicators;
public static Object getEL(String expr) {
FacesContext fc = FacesContext.getCurrentInstance();
return fc.getApplication().evaluateExpressionGet(fc,expr,Object.class);
Hope that helps-
Edited by: JuJuZ on Jan 3, 2012 12:23 AM
Add getEL Method

HDR camera mode shows "Saving" for a long time after taking a picture

I noticed that after taking a photo in the HDR mode with the camera on 4.1 (4th Gen phone), the "Saving Photo" and spinning icon persist on the screen. The only way to stop it is to tape the top button on the phone, which shuts off the screen. When I go back the photo appears to be saved with no harm. Anyone else have this lag?
It makes taking another photo very slow.

You must have an older iPhone. My iPhone 4 takes about several seconds to save them, which was kinda annoying first. I'm not taking pictures in a rapid succession so I guess it is not that bad, taking into account a better quality of the HDR pics. I hope Apple fixes this delay in the future update of the iOS.
I was wondering though if we disable keeping of a non-HDR picture, would that speed it up? (Settings -> Photos -> Keep Normal Photo -> Off)
In your case, Fred, it would probably be better to shoot in a normal (non-HDR) format due to older hardware.

Standby button is recessed after taking it out of a regular case?

Similar Messages

Maybe you are looking for