Standby Button problem

My hold button of my iPhone 5 does not work well. What can I do?
I have 1 year Applecare. Will it be repaired by Apple?
And how long do the reparations take if I send it to apple.

This has been available for quite some time.

Similar Messages

  • Standby button is recessed after taking it out of a regular case?

    i just recently took my iphone out of its case (a rubberized skin) and i noticed that the area where the standby button is is totally flat. the button is there, but pressed all the way into the iphone. its totally flat now. i can still press the button, but i have to press harder and it hurts my hand. hopefully taking it into the applestore tomorrow to exchange it. anyone else have these problems?

    This is a common issue with these phones...you may have luck getting genius bar to replace it but it depends on the tech...some will agree it's a defect some won't...
    Good luck

  • My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

    My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts  to works. Anyone already have simmilar problem?

    A windows error message appears saying iTunes has encountered a problem and needs to shut down.
    let's get a crash log from itunes, and send it to the Apple engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Standby button doesn´t work on iphone 5.

    since 2 days the standby button doesn´t work. after pressing several times, sometimes it will work.
    what can i do? my iphone is from 09/2012.

    This is a common problem, the on/off button and the mute, volume up and volume down are on the same flat, so you have to take it to an Apple store so they can fix it, or if you cant go right now you can activate the AssistiveTouch bi going to Settings=>General=>Accessibility=>AssistiveTouch. turn on it will help you.
    Good Luck

  • Caller screen Buttons problem Z10STL100-1

    I have Z10STL100-1 after official update Z10STL100-1/10.3.1.1565 having caller screen Buttons problem these are little above not like it's on 10.2 very below position. I security wipe and restart many times still same position of buttons? See pic attached

    Hello,
    Did you check if there are no objects on that index slide that have a fading transition? You should set the transition for every object to 'No transition'. The transition can be found in the Properties dialog, tab Options.
    Lilybiri

  • I send my iPhone to apple because my standby button doesn´t fit, what exactly should i send to apple? earphones and charging cable too?

    I send my iPhone to apple because my standby button doesn´t fit, what exactly should i send to apple? earphones and charging cable too?

    No! All Apple needs is your actual phone. Do not send the box or anything else as they will throw it away and you won't get anything back except for a phone! Do not send the sim card either and make sure you backed it up!

  • Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

    Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

    iPhones do not have an international warranty.  Warranty is valid only for the country of purchase.  This is most likely because different countries require different iPhone models.  Not reasonable to expect all countries to maintain stock for all models.

  • **URGENT** Scene button problem!

    Why my 'maps' and 'video' buttons do not play the movie? I use this code:
    on(release){gotoAndPlay("play");}
    I have labelled "play" in other scene, but it does not play the movie!
    I have tried this code:
    on(release){gotoAndPlay("Scene 36", "play");}
    Still, it does not work as well! I got deadline this week, so I need your help ASAP!
    I got other button problems on every scene! It's frustrating!
    Please download my flash file to look at my flash product!
    http://www.4shared.com/file/24177440...6d/Maps_1.html

    Nope it doesn't work , I got my deadline this week and if you got a spare time, would you please download my flash and check and repair it please! Only two buttons need refitting and nothing else! I asked my teachers, they tried their best and couldn't find what the problem is. I looked through other forum website, I tried the solutions and it doesn't work! I am really behind as there are many failure in my project! This is my first flash creation.

  • Naming Buttons - Problem with using Captivate 7 Buttons to Open URL or File

    After spending too much time troubleshooting a button problem, I discovered the importance of naming each item in a Captivate project.
    For some reason I have yet to figure out, publishing to SWF from Captivate causes buttons to function arbitrarily. In my case, I had eight buttons pointing to external URLs, three that worked and five that didn't. All of the buttons pointed to the same external website, only to different PDFs hosted on that site. Each button was named with the default "Button_X" convention as set by Captivate. After trying lots of different settings adjustments, On Enter and On Exit actions, and Play/Pause timings, I did what I should've done from the beginning; changed the names of the buttons.
    Why this worked? I don't know. I've seen hints on other discussions as to SWFs not working well when there are a lot of unnamed or default-named items. If there's some logic to this I would be happy to know it, but for a default setting to cause such a bizarre problem is beyond my comprehension. I could understand if I had named the buttons incorrectly, but I didn't do anything to them; I left them with the names created by default.
    Hopefully this helps someone else resolve a similar issue and, if anything, encourages everyone to follow best practices and use a clear file naming conventions for all projects.

    Hi there
    Perhaps the link below will help?
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Standby button not working iPhone 5

    I've had my iPhone 5 since Oct 2012. I never purchased AppleCare. My sleep/standby button stopped working in July. Will Apple replace my iPhone or fix the button?

    Apple doesn't fix phones; Apple replaces them.  As yours is under warranty, your phone will be replaced free of charge.

  • K button problems

    K button problems on keyboard. Has to be pressed harder than all the other butons on the keyboard. Ive tried going on  command prompt and pressing it, and its the same. I am running windows 7 pro.

    you probably need to get a new keyboard if you have a model number i can send you a link on what you need thanks 

  • HT1688 iPhone 4 home button problem

    Good afternoon,
    I have an iPhone 4 and it still in good condition but sometimes, the Home button doesn't respond quickly or doesn't respond at all. What to do?

    I seem to have fixed my iPhone 4 home button problems.
    1. Sync phone and back up.
    2. Go back and resync phone but uncheck all the apps you have purchased/downloaded so that your iphone will have no additional apps on it.
    3. Now reset your phone as a NEW PHONE.
    4. When reset as NEW, unplug it and try home button functions. I'll bet they work just fine, like mine did.
    5. Now that you are satisfied you can resync your apps, but be choosey. Re-install only a couple at a time, and test your home button each time. You'll soon find out which of your apps is causing the problem. It's time consuming and irritating, but it certainly works.
    So far - no problems with my selected re-installed apps. My home button works fine.
    However, I recently purchased several photography apps and an emoticon app and that was when the problems appeared to have started.
    So I've been very selective in putting only the apps I want back on ... for now.
    Hope this helps.
    I will report back to tell you if this complicated but effective solution has worked for me.

  • Home button problem in iphone 3g 3.0

    After upgrading my iphone 3g to 3.0 software, the home button has become so unresponsive, i have to click it 6-10 times sometimes to awake it. I mean what is it, dont you check the update before making it available to public, i mean its annoying, my 2 other friends have same problem as mine, they are on iphone 3g too. even 3.0.1 behaves the same way. comeon folks, become professional, kindly fix this thing in next firmware release.

    I had exactly the same problem - I bought my iphone 3gs last week, upgraded it and had the 'home button' problem. I tried all the fixes - restarting, resetting to factory settings, reloading update, etc. Then, a few days later, it all sorted itself out - no idea what happened, but since then my home button has been working perfectly! I have a feeling the factory reset and reload of update might have been the one that eventually did the trick...but since then, touch wood, it has been working perfectly. I would suggest trying the factory reset and see if that helps...make sure you back up first though!

  • Mega 865 - HiFi Button problems !

    Mega 865 - HiFi Button problems.
    Hi,
    I recently had some problems with the LCD display on the 865 and after
    following the very technical (wiggle the power cable) instructions, i got
    the LCD display working again, but now my HiFi button doesn't work
    has anyone experienced this before ??
    The radio/lcd display works fine in media centre
    cheers.

    I refer to this post https://forum-en.msi.com/index.php?threadid=66148
    I did this and the LCD display came back on again but now the hifi button doen't work

  • Anti virus's and home button problem

    Hi
    1)i want to
    We Need antiviruse in My iPhone 5s ?
    2)how to understand my iPhone when produce???
    Due to home button problem .
    Thanks

    There is no home button problem, the problem is with the power button on some iPhone 5 devices: https://ssl.apple.com/support/iphone5-sleepwakebutton/

Maybe you are looking for