Standby database(11g) was still in sync after stopping the primary and standby database listener.

Hello !!!
I have noticed that my standby database(11g) was still in sync after stopping the primary and standby database listener.
If this is the case then how log is transferring from primary to standby ? it is not using listener service ? kindly clarify

Read this Metalink Note:407040.1

Similar Messages

Sequence of stopping starting Primary and standby DB

Hi,
what are the sequence of stopping starting Primary and standby DB ?
To stop, which one ,primary or Standby, should be stopped first ?
To Start which one first ?
Thank you.

Hi,
what about the 10gR2 logical standbys? When I read the Note:278643.1 to apply the patch for logical database, it seemed that the sequence to stop and start the primary/logical standby was to stop the logical standby first before the stop of the primary one. Please advise me, for a simple situation just to stop and start the primary/logical standby to support a Unix server bounce, what is the sequence we should follow ? Do we have to run some commands to stop/start the SQL apply?
Any idea or suggestion will be greatly appreciated.
Thank you very much,
yKe

HT1338 hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine.

hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine. now though the pages just load very very slowly or load leaving out certain pictures and video content. i've tried clearing my cache's and cookies, resetting my browser etc, but it seems like its a system issue as both safari and firefox are having issues. i've run Avast to screen for malware and it came up empty. any suggestions?

10.4.8's been a pain for Networking... not sure of all the reasons though, or whether all the complaints might not be MS working around Bugs/Non-compliance, but at this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
Fixes a lot of problems, and besides, if your Mac ever gets to the point it won't Boot... this is a life saver!
After you run that... let's see where we are.
BTW, several ISPs seem to have trouble with their DNS Servers lately, might try these insead...
208.67.222.222
208.67.220.220

How to delete archivelog with RMAN in the Primary and Standby database?

Hello,
I am working on Oracle 10gR2.
My question is :
How could I implement a automatized and secure way of:
1) Delete archivelogs on my PRIMARY server only when these logs are successfully TRANSFERED to all my standby databases?
2) Delete archivelogs on my STANDBY server only when these logs are sucessfully APPLIED to the database?
Thanks a lot for your help!

on 10G
CONFIGURE ARCHIVELOG DELETION POLICY TO [CLEAR | NONE | APPLIED ON STANDBY];
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rman.htm#CHDBEICE
Coskan Gundogar
http://coskan.wordpress.com

Purging archivelogs on Primary and Standby

Hi all,
11.2.0.1
Aix 6.1
I am monitoring space usage in our FRA for both DG primary and standby. I want to purge all archivelogs once they have been applied to standby. What is the use of it anyway?
I checked google and I found this procedure, kindly correct if this is wrong?
At Primary:
=========
RMAN
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
At Standby:
========
RMAN
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
Where do I issue the command DELETE NOPROMPT OBSOLETE ARCHIVELOGS?
Thanks a lot,
zxy

Which tool in oracle dear maintains the FRA/achivelogs? is it RMAN or Dataguard. If it maintains
them auto, why is that I still have lots of archivelog at PRIMARY and STANDBY?
primary:oracle[/backup/flash_recovery_area/PROD/archivelog] ls -lt
total 200
drwxr-x---    2 oracle   oinstall       4096 Sep 25 15:59 2013_09_25
drwxr-x---    2 oracle   oinstall       4096 Sep 24 22:51 2013_09_24
drwxr-x---    2 oracle   oinstall       4096 Sep 23 22:03 2013_09_23
drwxr-x---    2 oracle   oinstall       4096 Sep 22 23:02 2013_09_22
drwxr-x---    2 oracle   oinstall       4096 Sep 21 21:25 2013_09_21
drwxr-x---    2 oracle   oinstall       4096 Sep 20 22:05 2013_09_20
drwxr-x---    2 oracle   oinstall       4096 Sep 19 23:00 2013_09_19
drwxr-x---    2 oracle   oinstall       4096 Sep 18 22:03 2013_09_18
drwxr-x---    2 oracle   oinstall       4096 Sep 17 22:53 2013_09_17
drwxr-x---    2 oracle   oinstall       4096 Sep 16 23:00 2013_09_16
drwxr-x---    2 oracle   oinstall       4096 Sep 15 23:01 2013_09_15
drwxr-x---    2 oracle   oinstall       4096 Sep 15 02:45 2013_09_01
drwxr-x---    2 oracle   oinstall       4096 Sep 14 20:32 2013_09_14
drwxr-x---    2 oracle   oinstall       4096 Sep 13 23:29 2013_09_13
drwxr-x---    2 oracle   oinstall       4096 Sep 12 22:02 2013_09_12
drwxr-x---    2 oracle   oinstall       4096 Sep 11 23:43 2013_09_11
drwxr-x---    2 oracle   oinstall       4096 Sep 10 22:27 2013_09_10
drwxr-x---    2 oracle   oinstall       4096 Sep 09 23:10 2013_09_09
drwxr-x---    2 oracle   oinstall       4096 Sep 08 23:00 2013_09_08
drwxr-x---    2 oracle   oinstall       4096 Sep 07 23:30 2013_09_07
drwxr-x---    2 oracle   oinstall       4096 Sep 06 23:11 2013_09_06
drwxr-x---    2 oracle   oinstall       4096 Sep 05 22:02 2013_09_05
drwxr-x---    2 oracle   oinstall       4096 Sep 04 23:45 2013_09_04
drwxr-x---    2 oracle   oinstall       4096 Sep 03 22:09 2013_09_03
drwxr-x---    2 oracle   oinstall       4096 Sep 02 22:33 2013_09_02
standby:oracle[/backup/flash_recovery_area/PRODDR/archivelog] ls -lt
total 296
drwxr-x---    2 oracle   oinstall       4096 Sep 25 15:59 2013_09_25
drwxr-x---    2 oracle   oinstall       4096 Sep 24 23:24 2013_09_24
drwxr-x---    2 oracle   oinstall       4096 Sep 23 22:13 2013_09_23
drwxr-x---    2 oracle   oinstall       4096 Sep 22 23:02 2013_09_22
drwxr-x---    2 oracle   oinstall       4096 Sep 21 21:39 2013_09_21
drwxr-x---    2 oracle   oinstall       4096 Sep 20 22:08 2013_09_20
drwxr-x---    2 oracle   oinstall       4096 Sep 19 23:01 2013_09_19
drwxr-x---    2 oracle   oinstall       4096 Sep 18 22:23 2013_09_18
drwxr-x---    2 oracle   oinstall       4096 Sep 17 22:53 2013_09_17
drwxr-x---    2 oracle   oinstall       8192 Sep 16 23:01 2013_09_16
drwxr-x---    2 oracle   oinstall       8192 Sep 16 00:46 2013_09_15
drwxr-x---    2 oracle   oinstall       4096 Sep 15 01:34 2013_09_14
drwxr-x---    2 oracle   oinstall       4096 Sep 14 01:03 2013_09_13
drwxr-x---    2 oracle   oinstall       4096 Sep 13 01:48 2013_09_12
drwxr-x---    2 oracle   oinstall       4096 Sep 12 03:29 2013_09_11
drwxr-x---    2 oracle   oinstall       4096 Sep 11 01:19 2013_09_10
drwxr-x---    2 oracle   oinstall       4096 Sep 10 01:54 2013_09_09
drwxr-x---    2 oracle   oinstall       4096 Sep 09 01:44 2013_09_08
drwxr-x---    2 oracle   oinstall       4096 Sep 08 01:59 2013_09_07
drwxr-x---    2 oracle   oinstall       4096 Sep 07 03:30 2013_09_06
drwxr-x---    2 oracle   oinstall       4096 Sep 06 02:05 2013_09_05
drwxr-x---    2 oracle   oinstall       4096 Sep 05 03:40 2013_09_04
drwxr-x---    2 oracle   oinstall       4096 Sep 04 01:48 2013_09_03
drwxr-x---    2 oracle   oinstall       4096 Sep 03 01:22 2013_09_02
drwxr-x---    2 oracle   oinstall       4096 Sep 02 02:31 2013_09_01
drwxr-x---    2 oracle   oinstall       4096 Sep 01 00:08 2013_08_31
drwxr-x---    2 oracle   oinstall       4096 Aug 31 03:18 2013_08_30
drwxr-x---    2 oracle   oinstall       4096 Aug 30 00:28 2013_08_29
drwxr-x---    2 oracle   oinstall       4096 Aug 29 03:51 2013_08_28
drwxr-x---    2 oracle   oinstall       4096 Aug 28 02:34 2013_08_27
drwxr-x---    2 oracle   oinstall        256 Aug 26 00:24 2013_08_26
drwxr-x---    2 oracle   oinstall        256 Aug 25 00:24 2013_08_25
drwxr-x---    2 oracle   oinstall        256 Aug 24 00:24 2013_08_24
drwxr-x---    2 oracle   oinstall        256 Aug 23 00:21 2013_08_23
drwxr-x---    2 oracle   oinstall        256 Aug 22 00:00 2013_08_22
drwxr-x---    2 oracle   oinstall        256 Aug 21 00:20 2013_08_21
drwxr-x---    2 oracle   oinstall        256 Aug 20 00:17 2013_08_20
drwxr-x---    2 oracle   oinstall        256 Aug 19 00:16 2013_08_19
drwxr-x---    2 oracle   oinstall        256 Aug 18 00:17 2013_08_18
drwxr-x---    2 oracle   oinstall        256 Aug 17 00:14 2013_08_17
drwxr-x---    2 oracle   oinstall        256 Aug 16 00:13 2013_08_16
drwxr-x---    2 oracle   oinstall        256 Aug 15 00:12 2013_08_15
drwxr-x---    2 oracle   oinstall       4096 Aug 14 10:53 2013_08_14
drwxr-x---    2 oracle   oinstall       4096 Aug 13 23:34 2013_08_13
drwxr-x---    2 oracle   oinstall       4096 Aug 12 23:10 2013_08_12
drwxr-x---    2 oracle   oinstall       4096 Aug 11 21:25 2013_08_11
drwxr-x---    2 oracle   oinstall       4096 Aug 10 22:44 2013_08_10
All of the above dates have been applied already. Thanks.

Shell script to get the mail whenever the primary or standby DBs down

Hi,
Can any one please provide the shell script to monitor the primary and standby databases, such that whenever the primary or standby database is down we have to get the mail.
Thanks,
Mahi

Hi Mahi,
in 10g you can configure this through EM dbconsole which will be very easy.
(i am not sure if this exists in 9i EM)

How to sync primary and standby database in 11GR2 on linux

Hi ,
How to sync primary and standby database in 11GR2 on linux . Both my primay and standby are 3 node cluster each.
Can you please suggest a good link and brief steps .
Thanks

Are you trying to setup a new standby or sync an existing standby database?
OK I see it
"standby is behind the primary"
So you have a gap.
I would check both alert logs for a cause. You might find something like this
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.Look for ORA-00308 and ORA-27037 and ORA-16055.
There's no sense fixing the gap unless the cause is fixed too.
Also check out this post from a few days ago its dealing with similar issues.
How to sync the standby database with the primary?
If you find this helpful please mark it so.
Edited by: mseberg on Jul 20, 2011 4:37 PM

Have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already hav

I have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already have it on my system (Mac OSX 10.9). I can't find the app. I uninstalled, restarted, etc. and same results.
Thoughts anyone?

Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer

How to re-synch primary and standby database?

Hello everyone,
Working on 10g R2/windows server 2003, I have configured a physical standby database but, I have an issue, and don't know how to resolve it.
We were making an update that made some DDL and DML on our application, and for security reason we
1. we ensure that primary and standby are in sync
2. We made a cold backup of the primary database
3. We Deferred the redo shipping between primary and standby
4. We applied changes on primary database
But the big issue is that, for any reason my colleague did the following.
a) made above steps 1,2,3,4
b) after the update he kept the resulted archived log files generated during to another location
c) He restore the cold backup before the update(step 2 above)
c) he applied again the update.
Now the issue is
At the first update step(2), the sequence# 553 was applied to the stand by before the update
At the second update step(c) above another sequence# 553 was created but stored localy in the primary database, because the both servers were deverged (step 3 above).
Technically both servers cannot be in sync again,because sequence# 553 at the first update has next_change# 80307804 and sequenc# 553 at the second update has next_change# 80461356.
Question:
How Can I do to rollback the the first sequence# 553 ( before the first update) on the standby database? in order to apply the sequence#553 generated at the second update and then re-sync both servers to roll forward subsequent sequence#? 554,etc...
Thank you for your help

Hello,
I have just tried the FLASHBACK DATABASE TO SCN XXXXXXXX;
but it doesn't work.
Here are steps used from my local dev envirronnment
From the stand by I retrieved the following information.
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE# FIRST_TIM NEXT_TIME
95 707168 707906 15-AUG-08 15-AUG-08
96 707906 708653 15-AUG-08 15-AUG-08
97 708653 709359 15-AUG-08 15-AUG-08
100 710951 711794 15-AUG-08 15-AUG-08
98 709359 710179 15-AUG-08 15-AUG-08
99 710179 710951 15-AUG-08 15-AUG-08
101 711794 712762 15-AUG-08 15-AUG-08
102 712762 713720 15-AUG-08 15-AUG-08
103 713720 714748 15-AUG-08 15-AUG-08
104 714748 715920 15-AUG-08 15-AUG-08
105 715920 739430 15-AUG-08 15-AUG-08
106 739430 800525 15-AUG-08 16-AUG-08
107 800525 875810 16-AUG-08 17-AUG-08
108 875810 916527 17-AUG-08 18-AUG-08
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database activate standby database; --> prepare to open stby in R/W mode
Database altered.
SQL> startup mount force;
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size 1250428 bytes
Variable Size 180358020 bytes
Database Buffers 423624704 bytes
Redo Buffers 7135232 bytes
Database mounted.
SQL> alter database set standby database to maximize performance;
Database altered.
SQL> alter database open;
Database altered.
SQL> startup mount force;
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size 1250428 bytes
Variable Size 180358020 bytes
Database Buffers 423624704 bytes
Redo Buffers 7135232 bytes
Database mounted.
Now I tried to mimic the flashback database as in the production, to bring it back to sequence# 105 above
SQL> flashback database to scn 739430;
flashback database to scn 739430
ERROR at line 1:
ORA-38754: FLASHBACK DATABASE not started; required redo log is not available
ORA-38761: redo log sequence 75 in thread 1, incarnation 2 could not be
accessed
I'm reverted back the physical standby to its function
SQL> alter database convert to physical standby;
Database altered.
SQL> startup mount force;
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size 1250428 bytes
Variable Size 180358020 bytes
Database Buffers 423624704 bytes
Redo Buffers 7135232 bytes
Database mounted.
SQL> alter database recover managed standby database using current logfile disconne
Database altered.
Verifying if the MRP is up and running: YES see below
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC3: Becoming the 'no FAL' ARCH
ARC3: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Clearing online redo logfile 1 C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO11.LOG
11 rows selected.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\local_destination1_orcl
Oldest online log sequence 110
Next log sequence to archive 0
Current log sequence 110
So, how can I reslove this issue? without creating the standby from scratch?
Thanks Again for your help

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

C disk space is still taken up after canceling VS2013 installation and uninstall

I tried to install the VS 2013 community by using the web installer, and then realized that the speed of my connection was not fast enough, so I cancelled the installation and wanted to download the ISO later. But after cancelling the installation, the C
disk was still taken up(before installation there was 9GB+ free, after cancelling the installation it was 1GB+).
I went to the "program and features", saw that there was a 7GB VS, so I uninstall it again using the "change" entry. However the C disk was still taken up. After rebooting the machine, it still is. So
now I cannot even install with the ISO image since there is no longer enough space now.
How can I correctly clean up the last incomplete install?
Here is the logs collected by http://aka.ms/vscollect :
https://onedrive.live.com/redir?resid=96DCD212B37392A6%21126
The OS is Windows 7 Ultimate.

Hi Joyee Cheung,
Thanks for sharing the result back.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

YOU can't fix it. But you can bring it in to Apple for an out of warranty replacement for $199.

I have customized my Firefox toolbar. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it. How do I get my customization of the toolbar to become permanent?

I have customized my Firefox toolbar several times. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it each time. How do I get my customization of the toolbar to become permanent?
It has occurred with Firefox 4.0.1 and 5.0

see http://kb.mozillazine.org/Corrupt_localstore.rdf
Take a picture of your toolbars so you can easily reconstruct them from the default after solving the the problem.
If it happens to you it will probably happen again in the future so you might want to keep some copies of your modified localstore.rdf file so you can delete the bad one and rename one of the replacements in waiting. Saving, copying and renaming must be done with Firefox down, of course.

I recently bought an album from itunes on my i pad but then i had to update my i pad so after every thing was done i try to redownload the album and icouldnt so what do i have to do to get that album back

i recently bought an album from itunes on my i pad but then i had to update my i pad so after every thing was done i try to redownload the album and icouldnt so what do i have to do to get that album back

Click here for information.
(33996)

Standby database(11g) was still in sync after stopping the primary and standby database listener.

Similar Messages

Maybe you are looking for