Standby Database GUI
I'm reading metalink note 271886.1 on the Differences Between Different Editions of Oracle Database 10G, and there is a line for standbt database gui, this feature is an option for 10G enterprise Edit and 10g personal Edition, but not for 10g Standard Edition.
What is exactly this feature ? which GUI are they talking about ?
Best regards,
laurent
I think they are referring to Oracle Data Guard
Similar Messages
-
Should the STANDBY database be in NOMOUNT Mode?
Hi There,
Just setup DataGuard and want to monitor the primary and standby databases via the grid. However, I can not configure the standby database because the standby database is in NOMOUNT mode. Was I suppose to mount it? If not, how do I configure the standby database with the enterprise manager in NOMOUNT.
Thanks.
JJennifer;
Yes the standby should be in MOUNT mode before apply starts. Or No, to NOMOUNT if you prefer.
Oracle 11g Data Guard: Grid Control Management
http://www.databasejournal.com/features/oracle/article.php/3826706/Oracle-11g-Data-Guard-Grid-Control-Management.htm
Install DataGuard using Oracle Enterprise Manager 10g grid control
http://dbatips.wordpress.com/2007/02/17/install-dataguard-using-oracle-enterprise-manager-10g-grid-control/
Manage Your Existing Data Guards with Enterprise Manager Cloud Control
http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html
oracle dataguard setup using enterprise manager grid control 11g
http://oracleinstall.wordpress.com/2011/08/21/1250/
Super Good
http://gavinsoorma.com/2011/03/creating-a-11g-data-guard-physical-standby-database-using-enterprise-manager-grid-control-10-2-0-5-2/
The oracle document Data Guard Broker 10g Release 1 (10.1) Part Number B10822-01 cover this in detail
http://docs.oracle.com/cd/B14117_01/server.101/b10822/gui.htm
OR for 11
http://docs.oracle.com/cd/B28359_01/server.111/b28295/title.htm
http://docs.oracle.com/cd/B28359_01/server.111/b28295/toc.htm
See Starting Up and Shutting Down a Physical Standby Database in the Data Guard Concepts and Administration
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-02
Best Regards
mseberg
Edited by: mseberg on Apr 27, 2012 3:22 PM -
Oracle Dataguard Question on Physical Standby Database with a Time Lag
I have a Standby database (PROD_LAG) that has a delay of 24hrs. How do I check to see what Archive have applied, what is current, and what is left to do.
There is a script but its for a Logical Standby database...
Thanks you in advance...hi,
ok a little bit more explanation.
The GUI does work but seems to report incorrect data.
I have carried out a switchover so the primary database is now 'offsite_emrep' and the standby database is 'office_emrep'
The GUI how ever still reports that office_emrep is the primary database.
I cannot add the offsite_emrep database as the host is unknown. I am however running the GUI from the Host.
I have the following from the agent status
[oracle@griddg bin]$ ./emctl status agent
#Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.3.0
OMS Version : 10.2.0.3.0
Protocol Version : 10.2.0.2.0
Agent Home : /u01/app/oracle/product/10.2.0/agent10g
Agent binaries : /u01/app/oracle/product/10.2.0/agent10g
Agent Process ID : 19797
Parent Process ID : 19780
Agent URL : https://griddg.domain.net:3872/emd/main/
Repository URL : https://griddg.domain.net:1159/em/upload
Started at : 2007-10-01 12:35:02
Started by user : oracle
Last Reload : 2007-10-01 12:35:02
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 116
Size of XML files pending upload(MB) : 27.67
Available disk space on upload filesystem : 83.08%
Last attempted heartbeat to OMS : 2007-10-01 12:38:08
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
any help is appreciated.
rgds
alan -
Creating physical standby databases with DG Broker & OEM
Hi guys,
I manage 8i, 9i & 10g databases through OEM 10.2.0.2.
Today, I would like to create physical standby db for the most important applications. Because I'm a lazy guy, I'd like to do it the easiest way, with GUI and wizzards provided by OEM.
1. Do you know any tutorial on the Internet that would help to do it easily ? My only source up to now is the official DB broker documentation (http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/toc.htm), which is 300 pages long like every Oracle doc. I'd appreciate any tutorial that could lead me straight to the essential. I've heard that is not so tricky to create a physical standby db
2. Is the procedure really different to create (and then manage) a physical standby database on Oracle 8i, 9i and 10g ? Is it possible to do it through DB Broker and OEM for every version ?
thank you for your help
AntoineAntionio,
Oracle Documentation is the best source of configuring any Oracle component.
But, If you do not want to read the entire doc, and want to configure Dataguard Broker (without OEM), then here is the Link.
http://www.oracledba.org/10g/dr/10gR2_dataguard_RAC_to_RAC.html#Configure_Dataguard_Broker: -
"Add Standby Database" wizard licensing
there is a wizard in grid control known as "Add Standby Database" does it require licesning ?
apparently this is missing in the EM dbconsole...
http://download.oracle.com/docs/cd/B28359_01/server.111/b28295/gui.htm#i1005702
Oracle Enterprise Manager Grid Control provides access to the complete set of Data Guard 10.2 features. Limited monitoring-only Data Guard functionality is available in Enterprise Manager Database Control.user9198889 wrote:
there is a wizard in grid control known as "Add Standby Database" does it require licesning ?
apparently this is missing in the EM dbconsole...
http://download.oracle.com/docs/cd/B28359_01/server.111/b28295/gui.htm#i1005702
Oracle Enterprise Manager Grid Control provides access to the complete set of Data Guard 10.2 features. Limited monitoring-only Data Guard functionality is available in Enterprise Manager Database Control.It's not a licensing issue, it's an inherent limitation of dbcontrol. It (dbcontrol) works with a single database. To create/manage a DG setup, you have to be able to work with multiple databases, hence the only flavor of OEM that will do it is GC. -
Creating a new schema in a Logical Standby Database
Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR> -
Issue in configuring Standby Database from Active database in 11g by RMAN
POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PMHello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
Logical Standby Database in NOARCHIVE Mode
Hi,
I have configured a Logical Standby Database for Reporting purposes. A Physical Standby Database is running for MAA. i.e. in case of Role Transition (switch/Failover) the Physical Stdby Db will get the role of the Primary.
The logical standby database is creating a lot of Archive Redologs files, nearly every minute. Redolog files are 50MB and there is no work done in db during the time. I'm NOT using Standby Redolog files.
Is there a need for logical standby database to be in NOARCHIVELOG mode? The Primary is definatley in ARCHIVELOG mode.
Thanks for any responses.
regards
Sahbahi,
well there are two things to the above:-
1. there was an archive file nearly every minute:
this is due to a db recovery. for some reason, the db was in inconsistent state, after a sudden shutdownof the OS. I was on a test environment, on windows vista, unfortunately. unimportant ... a reboot solved it.
2. Logical standby db in NOARCHIVE MODE when setup for the purpose of Reporting.
As long as the MAA configured for the primary db, such as physical standby db, and a second, the logical standby db setup purely for the purpose of reporting, which then can run with NOARCHIVELOG mode, after converting the physical standby db to logical.
logical standby db uses Streams architecture, so this method brings cost, time and performance advantages to the customer.
regards
Sahba -
Logs are not getting applied in the standby database
Hello,
I have created a physical standby database and in it the logs are not getting applied..
following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012
Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Attempting refetch
Media Recovery Waiting for thread 1 sequence 37638
Fetching gap sequence in thread 1, gap sequence 37638-37643
Wed Sep 05 07:53:59 2012
RFS[46]: Assigned to RFS process 3081
RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638
RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228
Wed Sep 05 07:55:34 2012
RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.
I tried registering and recovering the logs but it also failed..
Follows some of the information,
Primary
Oralce 11R2 EE
SQL> select max(sequence#) from v$log where archived='YES';
MAX(SEQUENCE#)
37668
SQL> select DEST_NAME, RECOVERY_MODE,DESTINATION,ARCHIVED_SEQ#,APPLIED_SEQ#, SYNCHRONIZATION_STATUS,SYNCHRONIZED,GAP_STATUS from v$archive_dest_status where DEST_NAME = 'LOG_ARCHIVE_DEST_3';
DEST_NAME RECOVERY_MODE DESTINATION ARCHIVED_SEQ# APPLIED_SEQ# SYNCHRONIZATION_STATUS SYNCHRONIZED GAP_STATUS
LOG_ARCHIVE_DEST_3 MANAGED REAL TIME APPLY ABC 37356 0 CHECK CONFIGURATION NO RESOLVABLE GAP
Standby
Oralce 11R2 EE
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
37637
SQL> select * from v$archive_gap;
no rows selected
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ ONLY WITH APPLY PHYSICAL STANDBY
Please help me to troubleshoot this and get the standby in sync..
Thanks a lot..the results are as follows..
SQL> select process, status, group#, thread#, sequence# from v$managed_standby order by process, group#, thread#, sequence#;
PROCESS STATUS GROUP# THREAD# SEQUENCE#
ARCH CLOSING 1 1 37644
ARCH CLOSING 1 1 37659
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
MRP0 WAIT_FOR_GAP N/A 1 37638
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS RECEIVING N/A 1 37638
RFS RECEIVING N/A 1 37639
RFS RECEIVING N/A 1 37640
RFS RECEIVING N/A 1 37641
RFS RECEIVING N/A 1 37642
RFS RECEIVING N/A 1 37655
RFS RECEIVING N/A 1 37673
RFS RECEIVING N/A 1 37675
42 rows selected.
SQL>
SQL> select name,value, time_computed from v$dataguard_stats;
NAME VALUE TIME_COMPUTED
transport lag +00 02:44:33 09/05/2012 09:25:58
apply lag +00 03:14:30 09/05/2012 09:25:58
apply finish time +00 00:01:09.974 09/05/2012 09:25:58
estimated startup time 12 09/05/2012 09:25:58
SQL> select timestamp , facility, dest_id, message_num, error_code, message from v$dataguard_status order by timestamp
TIMESTAMP FACILITY DEST_ID MESSAGE_NUM ERROR_CODE MESSAGE
05-SEP-12 Remote File Server 0 60 0 RFS[13]: Assigned to RFS process 2792
05-SEP-12 Remote File Server 0 59 0 RFS[12]: Assigned to RFS process 2790
05-SEP-12 Log Apply Services 0 61 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 62 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 63 0 Managed Standby Recovery Canceled
05-SEP-12 Log Apply Services 0 64 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 65 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 66 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 67 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 68 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 69 0 RFS[5]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 70 0 RFS[6]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 71 0 RFS[14]: Assigned to RFS process 2829
05-SEP-12 Remote File Server 0 72 0 RFS[15]: Assigned to RFS process 2831
05-SEP-12 Network Services 0 73 0 RFS[9]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 74 0 RFS[16]: Assigned to RFS process 2833
05-SEP-12 Network Services 0 75 0 RFS[1]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 76 0 RFS[17]: Assigned to RFS process 2837
05-SEP-12 Network Services 0 77 0 RFS[3]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 78 0 RFS[2]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 79 0 RFS[7]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 80 0 RFS[18]: Assigned to RFS process 2848
05-SEP-12 Network Services 0 81 0 RFS[16]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 82 0 RFS[19]: Assigned to RFS process 2886
05-SEP-12 Network Services 0 83 0 RFS[19]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 84 0 RFS[20]: Assigned to RFS process 2894
05-SEP-12 Log Apply Services 0 85 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 86 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 87 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 89 0 RFS[22]: Assigned to RFS process 2900
05-SEP-12 Remote File Server 0 88 0 RFS[21]: Assigned to RFS process 2898
05-SEP-12 Remote File Server 0 90 0 RFS[23]: Assigned to RFS process 2902
05-SEP-12 Remote File Server 0 91 0 Primary database is in MAXIMUM PERFORMANCE mode
05-SEP-12 Remote File Server 0 92 0 RFS[24]: Assigned to RFS process 2904
05-SEP-12 Remote File Server 0 93 0 RFS[25]: Assigned to RFS process 2906
05-SEP-12 Log Apply Services 0 94 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 95 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 96 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 97 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Log Transport Services 0 98 0 ARCa: Beginning to archive thread 1 sequence 37644 (7911979302-7912040568)
05-SEP-12 Log Transport Services 0 99 0 ARCa: Completed archiving thread 1 sequence 37644 (0-0)
05-SEP-12 Network Services 0 100 0 RFS[8]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 101 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 102 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 103 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 104 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 105 0 RFS[20]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 106 0 RFS[26]: Assigned to RFS process 2930
05-SEP-12 Network Services 0 107 0 RFS[24]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 108 0 RFS[27]: Assigned to RFS process 2938
05-SEP-12 Network Services 0 109 0 RFS[14]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 110 0 RFS[28]: Assigned to RFS process 2942
05-SEP-12 Network Services 0 111 0 RFS[15]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 112 0 RFS[29]: Assigned to RFS process 2986
05-SEP-12 Network Services 0 113 0 RFS[17]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 114 0 RFS[30]: Assigned to RFS process 2988
05-SEP-12 Log Apply Services 0 115 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 116 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 117 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 118 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 119 0 RFS[18]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 120 0 RFS[31]: Assigned to RFS process 3003
05-SEP-12 Network Services 0 121 0 RFS[26]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 122 0 RFS[32]: Assigned to RFS process 3005
05-SEP-12 Network Services 0 123 0 RFS[27]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 124 0 RFS[33]: Assigned to RFS process 3009
05-SEP-12 Remote File Server 0 125 0 RFS[34]: Assigned to RFS process 3012
05-SEP-12 Log Apply Services 0 127 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 126 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 128 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 129 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 130 0 RFS[32]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 131 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 132 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 133 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 134 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 135 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 136 0 RFS[33]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 137 0 RFS[35]: Assigned to RFS process 3033
05-SEP-12 Log Apply Services 0 138 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 139 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 140 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 141 0 RFS[36]: Assigned to RFS process 3047
05-SEP-12 Log Apply Services 0 142 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 143 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 144 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 145 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 146 0 RFS[35]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 147 0 RFS[37]: Assigned to RFS process 3061
05-SEP-12 Network Services 0 148 0 RFS[36]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 149 0 RFS[38]: Assigned to RFS process 3063
05-SEP-12 Remote File Server 0 150 0 RFS[39]: Assigned to RFS process 3065
05-SEP-12 Network Services 0 151 0 RFS[25]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 152 0 RFS[21]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 153 0 Archivelog record exists, but no file is found
05-SEP-12 Remote File Server 0 154 0 RFS[40]: Assigned to RFS process 3067
05-SEP-12 Network Services 0 155 0 RFS[37]: Possible network disconnect with primary database -
Error while trying to open physical standby database - (DATA GUARD)
Hi Everyone,
I have problems in opening the database of the physical standby in read- write mode/ read only mode. I have a primary server which is running on 2 node RAC and the standby on a seperate single server being used as DR. I recently got this server and my aim was to isolate the standby server from primary server and perform few test. As it has never been tested even once.
Primary Database spec: (2 Node Rac on ASM)
Oracle Version : 10.2.0.3.0
O/s : HP-UX B.11.23
Standby Database spec: (Single Node)
Oracle Version : 10.2.0.3.0
O/s: HP-UX db01 B.11.23
Error:
alter database recover managed standby database cancel;
Database altered.
SQL> alter database open
2 ;
alter database open
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DATA/dprod/datafile/system01.dbf'
Parameters :
log_archive_dest_2 string SERVICE=PROD1 LGWR ASYNC VALID
FOR=(ONLINELOGFILES,PRIMARY_
ROLE) DB_UNIQUE_NAME=PROD
remote_archive_enable string true
fal_client string DPROD
fal_server string PROD1, PROD2
Steps tried so far:
Changed log_archive_dest_2 = DEFER on both the primary nodes
Standby :
startup nomount
alter database mount standby database;
alter database recover managed standby database disconnect;
alter database recover managed standby database cancel;
alter database open/readonly (tried both)
Same error.
On Primary:
SQL> select max(sequence#) from v$log_history;
MAX(SEQUENCE#)
55702
on Standby:
MAX(SEQUENCE#)
33289
Primary Database:
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIME NEXT_TIME
55700 13-JUN-11 13-JUN-11
55700 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
55702 13-JUN-11 13-JUN-11
60824 rows selected.
Standby Database:
SEQUENCE# FIRST_TIME NEXT_TIME
55698 13-JUN-11 13-JUN-11
55699 13-JUN-11 13-JUN-11
55700 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
15206 rows selected.
Additional Information :
There is a delay of 20 minutes before the logs get applied. which has been intentional set by team.
Any help will be highly appreciated. Thanks in advance
SadiqHi,
Primary Database:
select status,checkpoint_count from v$datafile_header;
STATUS CHECKPOINT_COUNT
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
STATUS CHECKPOINT_COUNT
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 672472065
ONLINE 59736
ONLINE 59736
ONLINE 59736
ONLINE 59736
ONLINE 59736
STATUS CHECKPOINT_COUNT
ONLINE 57717
ONLINE 57717
57 rows selected.
Standby Database;
select status,checkpoint_count from v$datafile_header;
STATUS CHECKPOINT_COUNT
ONLINE 672445072
ONLINE 672445072
ONLINE 672445072
ONLINE 672445072
ONLINE 672445072
ONLINE 672445072
ONLINE 672445072
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
STATUS CHECKPOINT_COUNT
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
ONLINE 672445071
ONLINE 32742
ONLINE 32742
ONLINE 32742
ONLINE 32742
ONLINE 32742
STATUS CHECKPOINT_COUNT
ONLINE 30723
ONLINE 30723
57 rows selected.
Archieve log list :
Primary database:
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 49110
Next log sequence to archive 49111
Current log sequence 49111
Standby Database:
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 49110
Next log sequence to archive 0
Current log sequence 49111
I tried log switch multiple times in primary database i saw that its getting highlighted in standby database. -
Not able to get data of primary in standby database (configured dataguard)
Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\UNDOTBS01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\USERS01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\EXAMPLE01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\STREAM_TBS.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 7 - see DBWR trace file
ORA-01110: data file 7: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\DATA01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-16004 signalled during: alter database open read only...
3)wen i try to open standby database in read only mode gives below error..how do i solve it?
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSTEM01.DBF'971424 wrote:
Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?Please do not use IM language here, instead of "qsns" use questions.
SCN can be differ in standby and it can be behind to primary based on the backup you have restored. Of course by performing recovery you can synchronize standby with primary database. You can use incremental backups for standby using link http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
ORA-27041: unable to open fileFirst check whether those files are exist in that location or not and if file names are different other than primary then rename file locations. Also check the permissions on the folder/files. -
How to delete the foreign archivelogs in a Logical Standby database
How do I remove the foreign archive logs that are being sent to my logical standby database. I have files in the FRA of ASM going back weeks ago. I thought RMAN would delete them.
I am doing hot backups of the databases to FRA for both databases. Using ASM, FRA, in a Data Guard environment.
I am not backing up anything to tape yet.
The ASM FRA foreign_archivelog directory on the logical standby FRA keeps growing and nothing is get deleted when
I run the following command every day.
delete expired backup;
delete noprompt force obsolete;
Primary database RMAN settings (Not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD' CONNECT IDENTIFIER 'WMRTPRD_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD2' CONNECT IDENTIFIER 'WMRTPRD2_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD3' CONNECT IDENTIFIER 'WMRTPRD3_DG';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Logical standby database RMAN setting (not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
How do I cleanup/delete the old ASM foreign_archivelog files?OK, the default is TRUE which is what it is now
from DBA_LOGSTDBY_PARAMETERS
LOG_AUTO_DELETE TRUE SYSTEM YES
I am not talking about deleting the Archive logs files for the Logical database that it is creating, but the Standby archive log files being sent to the Logical Database after they have been applied.
They are in the alert log as follows under RFS LogMiner: Registered logfile
RFS[1]: Selected log 4 for thread 1 sequence 159 dbid -86802306 branch 763744382
Thu Jan 12 15:44:57 2012
*RFS LogMiner: Registered logfile [+FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297] to LogM*
iner session id [1]
Thu Jan 12 15:44:58 2012
LOGMINER: Alternate logfile found. Transition to mining archived logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/
foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297
LOGMINER: End mining logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/threa
d_1_seq_158.322.772386297
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 159, +DG1/wmrtprd2/onlinelog/group_4.284.771760923 -
How to delete archivelog with RMAN in the Primary and Standby database?
Hello,
I am working on Oracle 10gR2.
My question is :
How could I implement a automatized and secure way of:
1) Delete archivelogs on my PRIMARY server only when these logs are successfully TRANSFERED to all my standby databases?
2) Delete archivelogs on my STANDBY server only when these logs are sucessfully APPLIED to the database?
Thanks a lot for your help!on 10G
CONFIGURE ARCHIVELOG DELETION POLICY TO [CLEAR | NONE | APPLIED ON STANDBY];
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rman.htm#CHDBEICE
Coskan Gundogar
http://coskan.wordpress.com -
Can I rename a physical Standby database without having to recreate?
Hi all,
One of my DBA's created a new standby database yesterday. He was supposed to create the standby database with a unique name from the primary system, but he didn't. So right now, DataGuard is running and replicating, and the standby has the exact same database name as primary.
I'd like to get this configured the way we had planned, to rename the standby database to something unique. I see Metalink Doc ID 15390.1, showing how to rename a database, but I'm not sure if this is possible in the standby environment? Has anyone ever done this? Anything different that needs to be accounted for, in the physical standby DB?
I'm on 10.2.0.3, on Windows 2003.
Any help/advice is appreciated!!
Thanks,
BradDear TheBlakester,
You have to write it on the spfile and bounce the database. You should also have to change the log_archive_config parameter with the new standby db_unique_name.
From the online Oracle documentation;
For example, if the DB_UNIQUE_NAME parameter has not been defined on either database, the following SQL statements might be used to assign a unique name to each database.
Execute this SQL statement on the primary database:
SQL> ALTER SYSTEM SET DB_UNIQUE_NAME='CHICAGO' SCOPE=SPFILE;
Execute this SQL statement on the standby database:
SQL> ALTER SYSTEM SET DB_UNIQUE_NAME='BOSTON' SCOPE=SPFILE;
Step 4 Verify that the LOG_ARCHIVE_CONFIG database initialization parameter has been defined on the primary and standby database and that its value includes a DG_CONFIG list that includes the DB_UNIQUE_NAME of the primary and standby database.
For example, if the LOG_ARCHIVE_CONFIG parameter has not been defined on either database, the following SQL statement could be executed on each database to configure the LOG_ARCHIVE_CONFIG parameter:
SQL> ALTER SYSTEM SET
2> LOG_ARCHIVE_CONFIG='DG_CONFIG=(CHICAGO,BOSTON)';After than that it is better for you to check following items just in case;
v$archived_log
v$dataguard_status
Data Guard log file & Alert.log file.Hope That Helps.
Ogan
Maybe you are looking for
-
Error Message: "Your photo library is either in use by another application or has become unreadable. Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto,
-
Motherboard failed with no itunes library backup on harddrive. I put the HD in a USB adaptor and have connected to a newer PC. Is it possible to move my library onto the new PC.
-
Hi I'm running an installation of CC and CS6, and whilst CC App Mangler – sorry – Manager shows an update available for DW CS6, it refuses to install. Here's the output from the error log: 12/04/13 09:55:48:510 | [INFO] | | OOBE | DE | | | | 5797
-
Photoshop Elements and Photoshop Elements Premiere serial numbers
Hi, I just purchased Photoshop Elements Premiere bundle off Amazon (PC download). They weren't clear which serial number was for which programme. It seems that the serial number for PSE Premiere was accept for PSE. Now the other serial number isn't b
-
Crossdocking in EWM - Vendor to Customer via Company Warehouse
Hi All We have below scenario. 1). Customer places order. 2). Company places order to vendor to satisfy the customer order. 3). Vendor delivers to company. 4). Company ships to customer without keeping the stock in warehouse. As I know cross-docking