Standby database using rman backup
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AM
user10444101 wrote:
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564
Similar Messages
-
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
Build standby database using cold backup on a different file system & host
Hi gurus,
The database version is 11.2.0.3. OS is HP UX Itanium 11.31
I am building a standby database using cold backup of primary. The primary mount points are (/p003/oracle, /p004/oracle) on HOST1 and the standby file system on HOST2 are (/s003/oracle,/s004/oracle). I am not using Data Guard to apply logs as we have a script that mounts the log location periodically to standby server and apply the logs to make it current. I am using cold backup as the database is small like 200G and can be taken down. Could someone help me with the steps to build standby using cold backup for a different file location in standby ?? My concern is I can copy the data files from /p003 to /s003. How will I build the controlfile ?
If it was same File system on both HOST 1 and HOST2 I can copy the cold backup to the standby server, build a standby control file on primary and copy and replace the standby control file and everything was set.
Thanks
Cherrish VaidiyanHello;
I have a note on this using a cold copy of the current files instead of a copy backup :
http://www.visi.com/~mseberg/data_guard_on_oracle_10_step_by_step.html
I will post SCP SQL in a moment.
Best Regards
mseberg
set heading off
set feedback off
set pagesize 100
set linesize 400
select 'scp '||a.name ||' server_name:' || a.name as newname from v$datafile a;
select 'scp '||a.name ||' server_name:' || a.name as newname from v$controlfile a;
select 'scp '||a.member ||' server_name:' || a.member as newname from v$logfile a;Edited by: mseberg on May 25, 2013 10:35 AM -
Standby database using RMAN.
Hi All,
Please provide me complete steps to create standby database using RMAN.
Regards.http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377
-
Standby database from RMAN backup
I have been assigned to create a standby database from our RMAN backups in a different machine, as this is my first attempt at recovering, I am struggling a bit. I would appreciate if someone can throw any light on what dumb mistakeI am doing here. I ahve absolutely no control over the back up script which is done by my vendor, but can do anything in the reocvery portion. I did try going through the documentaiton and other help available for the last 2 days.
Database : Oracle 10G R2
OS : Windows Server 2003
My backup script is
configure channel device type disk format 'J:\RMAN\RMAN_df_%U' maxpiecesize 2048M;
SQL "ALTER SYSTEM SWITCH LOGFILE";
SQL "ALTER SYSTEM SWITCH LOGFILE";
backup database;
SQL "ALTER SYSTEM SWITCH LOGFILE";
SQL "ALTER SYSTEM SWITCH LOGFILE";
backup current controlfile for standby FORMAT='J:\RMAN\RMAN_sc_%U';
For recovery of a standby database,
I have copied the the back up pieces and the archive logs to the standby server where I have just created an instance with the same name as production db.
set ORACLE_SID=NGINPROD
set dbid 820336652
STARTUP NOMOUNT
RESTORE STANDBY CONTROLFILE FROM 'I:\TEMP\RMAN_Backup\RMAN\RMAN_SC_2UMIUJM1_1_1';
CATALOG BACKUPPIECE 'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_1_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_2_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_3_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_4_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_5_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_6_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_7_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_1_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_2_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_3_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_4_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2TMIUJLN_1_1',
'I:\TEMP\RMAN_Backup\RMAN\RMAN_SC_2UMIUJM1_1_1';
RESTORE DATABASE;
Till this step I do not encounter any issues, but when i try to recover the database I am hit with the below error.
RMAN> recover database;
Starting recover at 16-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
starting media recovery
unable to find archive log
archive log thread=1 sequence=253340
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/16/2011 09:31:57
RMAN-06054: media recovery requesting unknown log: thread 1 seq 253340 lowscn 4696173517
------------------------------------------------------------------------------------------------------------------------------------------------Here's the standard dcoumentation on the procedure :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377
Appendix "F Creating a Standby Database with Recovery Manager" of the "Oracle® Data Guard Concepts and Administration" guide.
I don't see ArchiveLog backups being done by the vendor's script. How do you backup the ArchiveLogs ?
In your post you state that you have copied the ArchiveLogs. Are they copied to the same log_archive_dest location ? RMAN needs to be "aware" of them. You can use the "CATALOG" command in RMAN to register them into the controlfile.
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230
A Standby Database uses a Standby Controlfile which is created from the Primary (with the "ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'locaion';" command) and then copied over to the Standby server.
Hemant K Chitale -
Problem creating standby database using RMAN
I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukantachannel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M -
Creating standby database using RMAN
When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database? -
Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND
Hi All,
I am in confusion how to create logical standby database from primary database using rman active database command.
What i did:-
Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
I done the creation of logical standby database by converting physical standby to logical standby database
I am following the below mentioned doc for the same:
Creating a physical and a logical standby database in a DR environment | Chen Guang's Blog
Kindly guide me how to work over the same or please provide me the steps of the same.
Thanks in advance.Thanks for your reply
I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
My primary database pfile is:
pc01prmy.__db_cache_size=83886080
pc01prmy.__java_pool_size=12582912
pc01prmy.__large_pool_size=4194304
pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01prmy.__pga_aggregate_target=79691776
pc01prmy.__sga_target=239075328
pc01prmy.__shared_io_pool_size=0
pc01prmy.__shared_pool_size=134217728
pc01prmy.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.fal_client='PC01PRMY'
*.fal_server='PC01SBY'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_3='DEFER'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
My logical standby pfile is:-
pc01ls.__db_cache_size=92274688
pc01ls.__java_pool_size=12582912
pc01ls.__large_pool_size=4194304
pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01ls.__pga_aggregate_target=79691776
pc01ls.__sga_target=239075328
pc01ls.__shared_io_pool_size=0
pc01ls.__shared_pool_size=125829120
pc01ls.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_unique_name='pc01ls'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
Kindly advice over the same -
Create standby database using restore backup
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.f55237a7-2c38-4db3-a7a3-1d77256f0730 wrote:
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.
Hi,
You are created standby control file on primary and copied to standby side:
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
And now, in paramter files, you have CONTROL_FILES parameter as below :
control_files='/u01/app/oracle/oradata/DB11G/control01.ctl', '/u01/app/oracle/fast_recovery_area/DB11G/control02.ctl'
it means you must copy controlfile IN standby side to second control file. Control files must be same.
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
You not need shutdown priamry database, becuase you copied standby control file to standby side, and all operations goin in standby side.
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Yes, you can use (db11g_stbg.ctl) standby controlfile
Regard
Mahir M. Quluzade -
Create Standby Database using RMAN changing backuppiece location ID753902.1
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMCKPT wrote:
user9198889 wrote:
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMHave you restored from the recent backup?
validate the backup compeltion_time and then retry the operation, Are you restoring from tapes?yes its recent backup(last and only backup infact ) , the backup took couple of days to run..
the backup was executing using this command BACKUP INCREMENTAL LEVEL 1 AS COMPRESSED BACKUPSET DATABASE TAG 'LEV1_BCKP_2011-06-27_11_54' PLUS ARCHIVELOG DELETE INPUT
there was no full backup so oracle must have taken full one and not incremental correct?
first logseq that was back's up is : 35818
primary uses local disk for its db and backup
standby that i am trying to create is on asm. i have copied backup to FRA and restored to +data its recovery that is failing now -
Problem creating physical Standby database with RMAN
Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again -
Standby Database with RMAN on ASM
Hi,
I am using redhat Linux AS 4 and my database is 10.2.0.1. This database used ASM for storage of data files, control files, online redo logs. Flash recovery area is also configured in the ASM.
I want to create a physical standby database on a different machine by using RMAN. Can someone kindly point me to some easy to follow document? I have scoured the oracle docs, but am more confused than ever.
regardsStep By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]
Note: the examples in this document use regular filesystems but the process is the same regardless, ie, in db_file_name_convert use your diskgroup rather than a filesystem (db_file_name_convert=+DG_SOURCE,+DG_TARGET)
another note to complement the first one:
Step By Step Guide On Creating Physical Standby Using RMAN Duplicate In ASM Filesystem For ASM Primary [ID 837102.1]
Edited by: rui_catcuddler on Sep 2, 2010 6:51 AM -
Cloning DB using RMAN Backup in a single system
Hi,
I want to clone my database using RMAN backup in the same system only. Please let me know the suitable document for that in both windows and linux.
Thanks in advance
Mahihi
find for both platforms linux and windows
http://www.dizwell.com/prod/node/9
http://www.pgts.com.au/pgtsj/pgtsj0211b.html
Regards
Vignesh Bala
Message was edited by:
Vignesh Bala -
Creating Standby for RAC ASM database using RMAN
We are having a Primary Site of 3-Node RAC ASM and we takes daily RMAN backup with the following script
run
allocate channel c1 device type disk format 'g:\rmanbackup\%U';
backup database;
backup archivelog from time 'trunc(sysdate-1)' until time 'sysdate';
We have configured 3-Node RAC Cluster in Standby site. We have copied the rman backup folder to one of the Nodes in the Standby site.
Request your help to restore the RMAN backup. The backup size is around 200GB. We do not know how to use DUPLICATE DUPICATE option in RMAN as if it is restoring from the Primary Location, then transferring 200GB over the network will not be possible.
We need a solution to restore it directly from the Backup folder available in the DR Server. We are not using catalog.
OS : Windows IA 64-bit
RDBMS : Oracle 10.2.0.4
Storage : ASM
DB Nodes at Primary Site, Node1, Node2, Node3
DB instances at primary site : ORCL1, ORCL2, ORCL3
DB Nodes at Standby Site, Node101, Node102, Node103
DB instances at Standby site : ORCL1, ORCL2, ORCL3
DB Name : ORCL on both the sites.When you create the standby, you can use catalogued backups, stored somewhere local to your standby servers.
For that, they need to be copied to the standby server, or taken from production there, and after restoring the standby controlfile on the standby server, use rman to catalogue the backups to be used. Then, you can use DUPLICATE... and it will be reading your local backup files.
The directory g:\rmanbackup of your rman script is local to standby servers ?
The docs for this have a lot of details: http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regards. -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
Maybe you are looking for
-
SCORM manifest title and description
Hi I'm trying to create a description and title field in the SCORM manifest. I set settings in the Project Information (see picture), but they don't seem to show up in the manifest. Am I doing something wrong? Thanks!
-
Can't see iphone in 'devices' on my imac
I can't see my iphone in 'devices' on my imac when I connec the two with usb cord. Can only locate it by signing into itunes. Can't move music from my imac to my iphone. Help please!
-
Ios 5 why do i only see 10 new features?
why does it say over 200 new features like i see about 10 new features yet the app store dont have any new apps and im just lost anyone know where the 190 that are missing are at please help!!! im using ipod 4th gen
-
Newby question: GOA backend distribution
Hi, I was wondering if someone can help me understand the GOA to backend OA distribution process. After reading the config guide for SRM4.0, I cannot understand how the IDOC BLAR02 is triggered? I know that if I follow the config guide, as soon as I
-
I have a company phone which i have locked and is stuck on the activation screen
I have a company phone which i have locked and is stuck on the activation screen