Standby DB shu and start sequence

HI all,
if i need to Shu a DB which is atteched with a physical standby db so ,what will be the procedure to shu and startup of prymary and standby db.
Thanks in Advance.
Deep

Thank u all, done :)
bash-2.05$ sqlplus "/ as sysdba"
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Aug 13 11:32:19 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
SQL> STARTUP NOMOUNT
ORACLE instance started.
Total System Global Area 337087024 bytes
Fixed Size          731696 bytes
Variable Size          218103808 bytes
Database Buffers     117440512 bytes
Redo Buffers          811008 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL>

Similar Messages

Firefox cannot open/reload any websites after resuming from a system standby. I have to close the current window and start a new session, then it works again

I am using Firefox v 13.0.1 (Mozilla Firefox for Ubuntu canonical 1.0) on Ubuntu 12.04 LTS. Whenever my system resumes from standby I am not able to open/load any webpages in the Firefox session that was already running before the standby. I don't get any error message, but the page doesn't load at all. If I close the session and start a new one everything works fine.

Not necessarily: rv:1.9.2.8 indicates a Firefox 3.6.8 version
*Mozilla/5.0 (X11; Linux i686; rv:1.9.2.8) Gecko/20100722 Firefox/4.0.1
You can check for a possibly corrupted user agent.
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

The sequence to stop and start xMII?

Hi, good afternoon:
Could anybody provide the sequence to stop and start xMII?
Is it different from xMii11.* to xMii12.*?
Thanks!

Yes, the steps are same as what I suggested before.
You can find plenty of material on SDN like blogs, articles, best practices and so on...
The best place would be to start with is [MII WIKI|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15601]
Below are few other very useful links,
[Blogs|Weblogs related to SAP xMII; ( you can also find many blogs under category Manufacturing, xapps, mii etc.. on SDN)
[Best Practices Guide|MII 12.X Best Practice Guide is now available;
And also can find loads of threads on MII 12.x, 11.x installations/configurations/troubleshooting simply use large search date range.
Hope this helps!!
Regards,
Adarsh

Start sequence of components and process types

Hi all,
I would like to know, is there any particular start sequence of the instance components and process-types while using opmnctl startall, or opmnctl startproc ias-component=..., or opmnctl startproc process-type=... ?
Regards

You may start looking at these tables-
RSBKREQUEST DTP Request
RSBKREQUEST_V View of DTP Request
Process Chain Statistics Tables:
- RSPCLOGCHAIN, RSPCPROCESSLOG
Hope it Helps
Chetan
@CP..

Changing Mac name and start-up sequence

I bought a new Mac Air to replace my work Mac Pro and transferred over my files using Thunderbolt. Unfortunately it has ported across the old work Mac Pro name, the NetBio and start up sequence which is looking for my old work network before fulling opening - how can I change it.

AilB wrote:
...how can I change it.
Change what? Your computer name? Do that in System Preferences > Sharing > Computer Name

Problem with "Insert" and "Overwrite Sequence Content"

I'm working with XDCAM footage. I like to take all the individual clips recorded on the XDCAM disc, and after getting them into FCP, taking them and putting them all in a sequence in FCP, then using that sequence as the source in the Viewer. This allows for quick scanning of all the clips, much as is it were a digitized tape.
I recently found the "Insert Sequence Content" and "Overwrite Sequence Content" commands in FCP, and like them in that they actually put the individual clips into my project timeline, and not just the combined sequence (which looks more or less like a nest when dropped into my project sequence).
Here's the problem: When I put IN and OUT points in the timeline, and "Insert or Overwrite Sequence Content" using the sequence containing all the clips, the video tends to be contained to between the IN and OUT points I set in the TIMELINE, but the audio tracks tend to expand past the OUT point I set in the TIMELINE, and I can't figure out why, or how to get around this.
Any assistance would be appreciated.

If you're inserting or overwriting, you're basically pasting the content that you've chosen. I wouldn't think the out point would be recognized, or even wanted. If you copied 5 minutes of clips and inserted it into a sequence with a 4 minute in/out point duration, do you want to only have the first 4 minutes inserted into the sequence? If you only place an in point, it will insert all the clips, starting at that point, and it will take up as much time as the clip content's duration.
Am I missing something here?

Premiere CC 2014.2 crashes when rendering or (rendering effects) In and Out SEQUENCE for playback in a Nested Sequence

I have 4 internal HDD and an External. No matter where I assign Media Cache Files or Media Cache Database Premiere crashes within 100-300 frames in a Nested sequence. I am trying to move the caches around, deleting them, restarting a fresh nested sequence... nothing! I cannot get the short film done because of it. I have even formatted my hard drive and started fresh thinking that solves the problem, but it still remains. Anyone know what I can do?
Running Windows 7 64 on Bootcamp.
Quadro 4000
32GB Ram
dual xeon quad core

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

Video playback stops and starts

I've never had this problem before but since I wiped my 5th Gen (late 2006) iPod Video and put new content on it the video playback keeps freezing for a second and then continuing. Most of the time the audio keeps going but sometimes they both stop and start again. It's very annoying. I don't see anyone else in this forum complaining about this. Am I the only one?
Anybody have any suggestions on how to fix this?
-LT

What codec does your source footage use?
What codec is applied in Sequence > Settings?
Where are the source footage and render files located on your computer?
Version of FCS, Mac OS X and QuickTime?

Color correction problem between original sequence and multicam sequence... Please help

I used three camcorders to record a youth dance recital. I created an orginal sequence for the three camcorders and another sequence using the multicam feature to edit the dances. After I finished editing, I went back to the original sequence to make some color correction and brightness adjustments using the Fast Color Correction controls. After that, I sent everything to Encore to create a DVD. When I watched the DVD, I noticed some of my color correction settings were still off, so I went back to the orginal sequence to make some changes. Unfortunately, the multicam sequence would not read the new settings. After a few unsuccessful attempts to get the clip from the multicam sequence to read the clip from the original sequence, I decided to start over by clearing the Fast Color Correction controls from the clip. The multicam sequence then adjusted back matching the original sequence. However, when I started a new Fast Color Correction control in the original sequence, the multicam sequence would not take the new settings. How to I get the mulitcam sequence to read the orginal sequence?

Thank Jim for replying:
I am stumped on this one. I did a few radical tweeks and it did not take. For example, I made one clip in the original sequence go completely dark. However, the clip in the mulicam sequence did not change.
I even deleted the render files and the work area render files and started over with making changes. Nothing. Any change I make on the original sequence will no longer adjust in the multicam sequence.
Any last words of advice before I delete the entire multicam sequence and start over? Thanks.

Startup and shutdown sequence in RAC on Linux

I am trying to understand the start-up and shutdown sequence in 11g R2 RAC on Linux(OEL5.8).
can you please share me docs or sequence.

Hi Friend,
Example : Two node RAC. RAC1 and RAC2 instances.
Stopping RAC2 Instance :
=========================
1. Shutdown the Instance running on RAC2
2. ./srvctl stop asm -n csbppmaadbs02
3. ./srvctl stop nodeapps -n csbppmaadbs02
4. ./srvctl stop listener -n csbppmaadbs02
5. Check "./crs_stat -t"
Note 1 : Check the following also for healthy status & If any service of RAC that also we have to check.
6./crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
Starting RAC2 Instance
=========================
1 ./srvctl start nodeapps -n csbppmaadbs02
2 ./crs_stat -t
3 ./srvctl start listener -n csbppmaadbs02
4 ./srvctl start asm -n csbppmaadbs02
5. Start the Instance of RAC2
6. ./crs_stat -t
Hope it helps...
Thanks
LaserSoft

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

At end of timeline cursor returns to beginning and starts over?

I am sure there is an easy fix to this very minor issue.
When I get to the end of any timeline the cursor automatically jumps back to the beginning and starts over.
How do I get it to just stop at the end of the timeline?
It used to stop and just started doing this somewhow? To my knowlege I have not made any changes to sequence settings, user preferences, etc.
Many Thanks,
Peter Mallamo

If it was a snake it would have bit me!
Thanks Michael. I guesss I somehow hit control L.
Thanks again,
PM

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Order of stop and start of reporting services

Hi All,
I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
Thanks
Hypuser

The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Standby DB shu and start sequence

Similar Messages

Maybe you are looking for