Standby issue during movies

Mabook air 2013 , when i watch a movie on itunes or VLC and i move my macbook vertical/ horizontal it will be going to stand by mode..

Simply moving the MacBook Air shouldn't cause it to go into sleep mode.  Is it possible that the computer is being affected by a magnet as you are moving it?  The sleep sensor is a magnetic connection between the lid and the area near the keyboard.  That's how it knows when the computer is closed.
Other magnets (maybe on a watch/bracelet, or nearby speakers) could also send the computer to sleep if they are brought close enough to the computer's sensor.
If it's not that, I would suggest taking your MacBook Air to an Apple store so someone at the Genius Bar can take a look at it.

Similar Messages

  • Transport Issue - ERROR: stopping on error 12 during MOVE NAMETABS

    Hi Gurus,
    Good day!
    Can you someone help me with my transport error.
    ERROR: stopping on error 12 during MOVE NAMETABS
    Appreciate your help.
    Cheers,
    Virgilio

    Thanks for the reply. Here you go.
    START MOVE NAMETABS        <SAPSID>      20090921154118              <sidadm>       20090921154115003083
    START tp_getprots         <SAPSID>      20090921154118              <sidadm>       20090921154115003083
    ERROR ALL                  <SAPSID> 0012 20090921154253              <sidadm>     20090921154115003083
    STOP  tp_getprots          <SAPSID>      20090921154253              <sidadm>       20090921154115003083
    STOP  MOVE NAMETABS        <SAPSID>      20090921154253              <sidadm>   20090921154115003083
    ERROR: stopping on error 12 during MOVE NAMETABS
    Edited by: Virgilio Padios on Sep 21, 2009 9:52 AM

  • I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    king,
    If your Powerbook's serial number (do not post it here) starts with "W8" then the vertical lines are mostly likely due to a defect in the display itself. W8 is a factory code and, during the iMac G5 and PowerBook G4 timespan, that factory shipped thousands of units with the same defect. It cannot be fixed via software.
    As all PowerBooks are now classed as "obsolete," an Apple Store will not work on it. They will look at it ands tell you it has vertical lines and that they cannot fix it. This Apple article shows Apple devices they curently considered obsolete:
    Vintage and obsolete products - Apple Support
    It is possible that some Apple Authorized Service Providers (AASP) will still work on older computes but they cannot get neededparts from Apple. As this issue was so pervassive, it wil be hard for you or an AASP to find a used/pulled display that is not effected with the "W8 Curse."
    Although I love the old PowerBooks, I would not even spent the money for disks, much less the US$150-400 it would cost to replace the display, even should one be available.
    If you give us a rough idea of where you are in the world, we can suggest repair shops specializing in fixing older Mac notebooks, but be aware those resources may be rather scare outside North America.

  • Error during movie encoding - tried all the common things, any suggestions?

    HI, Attempting to burn a DVD from iDVD 7.11
    I'm getting the "Encoding Error: There was an error during movie encoding" dialogue at the end of an attempted burn. Tried several times and many of the suggestions already on the forum
    I have "shared" the movie from iMovie. When it first opens iDVD I have to change the default setting of "best Performance" to "Professional Quality" and the video mode to PAL (I'm in Australia). I change it both in the preferences pane (a change which seems to be ignored when I restart the program) and in the project info.
    - I'm trying just to make a disc image, but haven't got past this first step to getting it to DVD...
    - There is only the movie in my project (I've not added audio or pics in iDVD)
    - I've used the "Modern" theme and deleted the default drop zones and menu audio,
    - I've checked the chapter markers are not at the start of the movie or near any transitions,
    - There are no special characters in the titles,
    - All titles and menus are within the TV safe zone,
    - I've deleted the com.apple.iMovie.plst files and emptied trash,
    - I've tried deleting encoded assets,
    - Repaired permissions, restarted the computer, checked for updated software,
    - (tried a "safe boot" as someone suggested somewhere, but the program couldn't find the movie or audio files),
    - I have 660GB free on the main hard drive,
    - I've disconnected external drives,
    - no error appear in map view,
    - I preview the project and all appears fine,
    The original footage was filmed for me. I was given a DVD which I ripped into an MP4, import into iMovie, edited the audio, added AIFF audio, added a jpeg image and 2 transitions. (Unfortunately the audio on the original I was given is unusable, else I could just copy the DVD I was given.)
    So if anyone has further suggestions as to what might resolve this issue, please let me know!

    Thanks for your post F, much appreciated
    The project is 123 minutes, 4.16GB and it's being broadcast on TV, so I need max quality I can get (without spending money!)
    I think I have sort of solved the problem - addressing what you've identified in a slightly different way.
    Since my previous post, I noticed that clicking on the "Media" tab in the side pane, and selecting "Movies", my project was listed, but when I clicked on it, rather than the thumbnail I get on other movies I've processed, I got this text:
    "This iMovie project can't be used because it hasn't been prepared for sharing yet. To prepare it for sharing, open it in iMovie and choose Share > Media Browser.... "
    I did that (7 hours processing) then successfully created the disc image (2 hours processing). I have now burnt the DVD using disc utility (1 hour processing). It plays OK on the computer, but I'll need to check it on a normal player before marking this as thread solved (I don't have one here at home).
    Unfortunately somewhere in all this processing the video has significantly lost quality. I thought I'd used all the highest quality setting, but will have to go back and check each step again. Unless someone reading this post has noticed anything I've done so far that would compromise video quality. The audio is fine - which for this project is the most important aspect.
    So in regard to my initial problem; it seems there is a problem in iDVD not recognising/remembering the set preferences when using the "Share > iDVD " function in iMovie.
    To summarise my solution for anyone else who experiences the same issue,
    When sending a project from iMovie using "Share > iDVD " it seems you must also choose "Share > Media Browser.... "
    This may be specific only to the case where PAL is required.
    PS
    I should also note, incase it made any difference, that I found the default headings in the chapter menus had dashes in them (i.e. it defaults to "Scenes 1 - 6", so I changed to "Scenes 1 to 6"). The only other modification I made since my original post was using stills instead of moving thumbnails for the chapter selection.

  • "Error during movie encoding" help pls?

    Hi,
    sorry if this is a repost but i have looked through all the other threads taken on board all the advice and still coming to the same result. im hoping there is someone who can help? its driving me a bit mad tbh
    this is where im at:
    - have 63gb of free disc space
    - have repaired disc permissions
    - no errors on map image page
    - all files work in quicktime and itunes
    - all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
    - does not exceed the space allowance in 'project info'
    - have tried moving the iDVD pref file to the desktop (with app closed)
    - Tried 'deleting encoded assets'
    - cleaned dvds.
    - iDVD version 7.0.4
    - disabled chapter markers
    - using verbatim DVD-R discs
    - tried slower burn speeds (x4)
    - tried burning a disk image as well as straight to disc
    keep on getting the same issue "error during movie encoding"
    can anybody help?
    thanks in advance
    c

    You've tried all the things we usually suggest.
    all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
    I suspect something is wrong with this conversion. What was the original video source?

  • GRRR!  "There was an error during movie encoding"

    I can't seem to compile and burn a DVD to save my life with iDVD.  I have a video that I created and exported using iMovie and two shorter ones created in Photoshop CS6 — all three are the same encoding:  1920 x 1080, H.264, AAC, Color profile: HD (1-1-1).  The one exported with iMovie is a .mov file and the other two are .mp4 files — none of them with any sort of copyright/permissions protection on them.
    iDVD previews them all just fine, but EVERY SINGLE TIME I go to try and burn a DVD it gives me the above error message, "Encoding Video: There was an error during movie encoding" which tells me absolutely nothing.  This might not stress me out so much if it were just a personal project, but rather it's for a friend's wedding that I shot and iDVD's failure to do a basic thing like encode video is really ticking me off.
    I tried to localize the issue by trying to burn just the .mov file and then just one of the .m4v files — and have found it chokes on m4v files.  Why is this so??
    If I'm doing something wrong, the error message should give me a little more feedback than just "oh there was an error."

    Hi
    We are only Users - trying to help other users - rarely Apple or program developer drop in for a look so I would send feedback here
    • www.apple.com/feedback/idvd.html
    BUT as Apple discarded the product in all - can not even be bought any more - any further development is most certainly never to be.
    But what You feed iDVD matters and - You and so many more has the idea that .mov or .m4v etc are movie formats/codecs - they are not - only containers - so to figure out what You give iDVD You need to find what's in them. I do like this
    • Open them in QuickTime Player
    • here open Inspector [cmd+I]
    • read - Video Format/Codec: nnnnnnn
    What does it say and in what frame rate (fps) ?
    iDVD can only do good (very good) DVDs when feed
    25 or 29.97 fps
    interlaced SD-Video
    So by feeding it 1920x1080 24fps - to make a NTSC (29.97fps) DVD - result will be very BAD. Conversion is of need. I use following programs to do this
    • Frame Rate - JES_Deinterlacer
    • MPEG Streamclip
    • QuickTime 7.6 + Pro-upgrade
    Yours Bengt W

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • Automating Goods issue during Delivery creation

    Hi all,
    We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
    We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
    But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
    The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
    I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
    Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
    Thanks,
    Packia

    Dear Siva,
    As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
    Please let me summarize, I am really desparate here:
    This is only IM related, Not WM.
    Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
    Issue is not Aut. PGI.
    VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
    In the deliveries of correct processed shipping points  I do not find any picking output type.
    Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
    There is no picking block active.
    PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
    Can you please try to help me out?
    Tnx & regards,
    Chris

  • BAPI to reverse Goods Issue for movement type 601

    Hi Everyone,
    Does anyone know of any BAPI that could be use to reverse Goods Issue for Movement type 601?
    I tried using BDC of transaction VL09 and was able to reverse the GI document successfully but the return message type was 'E' with unreadable message -
    Tabelle 'E' enth#t keinen Eintrag f# 'Ch 004 &'
    When I tried using BAPI_GOODSMVT_CANCEL, I get the error message 'E M7 130 Material document cannot be processed'.
    Best Regards,
    Junwen

    hi, Junwen!
    the following code works pretty well:
          fp_vbeln = vbeln_val.
          fp_budat = budat_val.
          fp_tcode = 'VL09'.
          fp_vbtyp = 'J'.
          CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
            EXPORTING
              i_vbeln                         = fp_vbeln
              i_budat                         = fp_budat
            I_COUNT                         =
            I_MBLNR                         =
              i_tcode                         = fp_tcode
              i_vbtyp                         = fp_vbtyp
            TABLES
              t_mesg                          = it_mesg
           EXCEPTIONS
             error_reverse_goods_issue       = 1
             OTHERS                          = 2.
    luck.

  • Security deposit transfer during move-in

    Hi All,
    My requirement is to transfer security deposit automatically during move-in/move -out from EC60.I can transfer the same from FP40 , but I want to transfer this automatically through EC60.
    In move-in control parameter , I have already set the automatic transfer of SD in configuration.What else I need to do for this?
    Also before transfer through FP40 , I need to release the same and the SD will be transferred to new contract account without any restriction.If I want to place the restriction again, what I need to do?

    Banasri:
    using the move control parameters, you will be able to control the deposit transfer automatically when the move in/out occurs.  The contract on the original deposit (request and/or payment) will be updated to the new contract.
    regards,
    bill.

  • My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

  • Critical Issues During SAP Implementation or After Golive

    Can anybody tell me one of  the most critical/ challenging issues During SAP Implementation or After Golive
    in these modules:-
    MM implementation
    PP implementation
    SD implementation
    FI/CO implementation
    PS implementation
    QM implementation
    HR implementation
    BI implementation
    XI implementation
    Thanks and regards
    RS

    hi,
    I will list out few of critical issues in
    Implementation :
    1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
    2.  Unit & Integeration testing should be through with all validations
    3.  Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
    If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
    4. Check tax procedures are customized according to requirements.
    5. Complete all print document customizations before go live
    6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
    cancellation/reversal of documents after post go live)
    7. Ready with standard MIS reports & customized reports for business decision making
    8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
    9. Check all tables datas are updating correctly
    10. Declare go live to SAP Support
    11. Check All user authorization should be correct according to their roles.
    12. Centeralize all master datas creation(avoid duplication)
    13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
    14. Ensure document numbering is completed for all documents
    15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
    After Go live :
    1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
    2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
    3. Identify there is enhancements to be done in transaction process(By step-2)
    4. Prepare a list of month & year end activities to be performed for all modules give to users
    5. Prepare  a list of frequently used transaction codes module wise give it to users
    6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
    7. Train the users,take reports in respective modules.
    8. Additonal customization might be done in print documents.
    9. Instruct users/CTM's to adapt SAP Standard practise
    10. Update excise tax rates after every indian budget
    Hope it helps.
    Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

  • GL posting during movement type 107 & 108

    Presently system is posting to inventory Gl Account for rejections ,returns and damages from customers during 107 and 108 movement type in MIGO
    we want system to post to different GL Account with respect to reason for movement only  during Movement type 107 and 108
    Edited by: Prabhudev on Nov 8, 2008 9:39 AM

    Hi
    These are the new movemnt types used for Goods receipt with ref. to Purchase order
    107 Mvt recives the Stock as GR Blocked Stock but with Value, An accounting document gets generated
    109 Mvt moves the material fro GR Blocked stocked to Unrestricted use stock , No accounting Documents are generated.
    108 & 110 are reversal movements ffor 107 & 109
    These movments are similar to that of 103 & 105. Which are used for 2 step GR w.r.t PO
    In 103  Stock type is GR Blocked stock with out value , no accounting document genareated
    105 Stockm is moved from GR blocked to Unrestricted use. accounting document is generated.
    hope this helps
    Edited by: Manohar Raju on Feb 26, 2008 10:53 AM

  • Issue during Save - BDT

    Hi All,
    I have added 2 custom fields in the additional tab of the BP transaction using BDT.
    I have enhanced the table BUT000 with the above two fields using append structure.
    But now i got following few issues during saving the BP.
    1) Not able to save those two custom field values in the corresponding table of BUT000.
         As i was new to BDT could any one guide me how to save the custom field information in BDT?
      2) If I am changing any one of the fields and trying to save for any existing BP,
          It was throwing a message saying 'No changes done to the transaction'.
          Here the Transaction was not recognizing the fields even if the changes done.
          Could any one please let me know how to handle this?
    Thanks in advance.
    Regards,
    Gopi.

    Hi,
    1> Did you implement function module for DSAVE event? Check if you have  different names for the field in the BDT table and the database table in the BDT setting
    Assign field to DB
    2> You need to write a function module for XCHNG event and export 'X' after checking the old and new memory for changes. This will correct the message.
    Thanks and warm regards,
    Smita.

Maybe you are looking for