STANDBY LOGICAL & PHYSICAL

Using Oracle10gR2
If i create a new tablespace or add datafile on the primary db will it automatically create on the STANDBY LOGICAL & PHYSICAL
Please advice

Hi,
i had logged metalink SR,go ahead with below ACTION PLAN response received
primarydb
=======
create tablespace per datafile 'c:\DATA\perfstat.dbf' size 200M autoextend on;
Logical stdby db [explicitly]
=====================
create tablespace per datafile 'c:\DATA\perfstat.dbf' size 200M autoextend on;
Physical stdby db
=============
No statements to execute, the above changes to primary will automatically get
updated here.
Since i do not have a test environment to check, my concern is
1. Above steps are correct sequence
2. Will it stop my replication to logical & physical stdby
3. Has anyone done this
Please help

Similar Messages

  • DataGuard ? Standby (Logical/Physical) ? Need Information - Implementations

    Hi All
    I am trying to aquaint my self with the DataGuard concepts but I must admit I have limited knowledge/exposure into this side... when I have set-up the DR so as to ship archives from the primary to disaster recovery site geographically located else where.. and that was in oracle 9i 9.2.x release..
    Now there is 10g and then 11g.. and as I learn DR has evolved alot in its implementation methodologies. I am trying to fid an anecdote which can talk in a little detail/more detail but some detail less than the oracle documentation it self would be..
    Honestly, when I pulled out the pdf's, I could not proceed much length... and am coming here.. for your help...
    hoping may be one of you, if not most of you might have explored it well already ad might have recorded it some where in your content. If you would not mind, could you please let me know where I can get such info and then ofcourse, understand it better and quicker!!
    Thanks!
    Sarat

    Hi All
    I am trying to aquaint my self with the DataGuard concepts but I must admit I have limited knowledge/exposure into this side... when I have set-up the DR so as to ship archives from the primary to disaster recovery site geographically located else where.. and that was in oracle 9i 9.2.x release..
    Now there is 10g and then 11g.. and as I learn DR has evolved alot in its implementation methodologies. I am trying to fid an anecdote which can talk in a little detail/more detail but some detail less than the oracle documentation it self would be..
    Honestly, when I pulled out the pdf's, I could not proceed much length... and am coming here.. for your help...
    hoping may be one of you, if not most of you might have explored it well already ad might have recorded it some where in your content. If you would not mind, could you please let me know where I can get such info and then ofcourse, understand it better and quicker!!
    I think to be DBA one must have patience and determination. You have to go through the document, then try yourself if anything is not in documentation and you face some problem then come to us. I got a very good link from oracle corporation. This is divided into topics, you can go one by one and ask quetions in the forum if you feel like. Check this
    Regards.

  • Is that possible to convert logical standby to physical standby ?

    Hi guys,
    My steps for testing as below:
    1.create a primary database
    2.duplicate a physical standby database;
    3.turn on flashback on both databases.
    4.record SCN xxx on physical standby database.
    5.convert physical standby to logical standby (using keep identity statement)
    6.flashback to logical standby to xxx
    7.convert logical standby to physical standby
    8.using real time apply
    I got errors:
    Fast Parallel Media Recovery enabled
    Managed Standby Recovery starting Real Time Apply
    MRP0: Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
    Errors in file /home/ora/app/oracle/diag/rdbms/ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:
    ORA-19906: recovery target incarnation changed during recovery
    Managed Standby Recovery not using Real Time Apply
    Errors in file /home/ora/app/oracle/diag/rdbms/ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:
    ORA-19906: recovery target incarnation changed during recovery
    Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.
    Standby database incarnation:
    List of Database Incarnations
    DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
    1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:18
    2 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01     BGV

    Hello;
    Because of limitations for specific data types and objects with a logical database I going to say no.
    Best Regards
    mseberg

  • Logical Standby to Physical Standby

    Hi Group,
    Please clarify. Is it possible to return from a Logical Standby to Physical standby without copying the datafiles from Primary enviroment again?.
    If yes, how?
    Thanks a lot.
    Oracle 10.2.0.4
    SO: AIX 6.1
    We also have all archives generated by primary database on disks

    user12215372 wrote:
    Hi Group,
    Please clarify. Is it possible to return from a Logical Standby to Physical standby without copying the datafiles from Primary enviroment again?.
    If yes, how?
    Thanks a lot.
    Oracle 10.2.0.4
    SO: AIX 6.1
    We also have all archives generated by primary database on disksAFAIK, it is not possible, you have to create a fresh physical standby database.

  • Creation of standby logical controlfile

    can anybody let me know how to create standby logical controlfile....
    i know how to create physical standby control file....
    when i created a logical standby controlfile and after mounting the logical standby database, i got an erorr database name is not a standby database...

    Hi,
    DB VERSION matters here!!
    apart from that just look at this...
    For 9.2
    On the primary database, create a backup copy of the control file for the standby database:
    SQL> ALTER DATABASE BACKUP CONTROLFILE TO
    2> '/disk1/oracle/oradata/payroll/standby/payroll3.ctl';
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ls.htm#1060804
    and If possible Please search google or this forums!
    Regards!

  • Standby Logical DB ORA-00600: internal error code, arguments: [ksmovrflow],

    hi
    please help me how fix this problem?
    I have primary oracle database version 9.2.0.1.0
    I had configured standby Logical database on separate computer & everything was going good but today I noticed the archived log havent applied & I have ORA-16111: log mining and apply setting up in DBA_LOGSTDBY_EVENTS without any forwarding.
    in alert log file I found out these error:
    Errors in file c:\oracle\admin\bmdbsb\udump\bmdbsb_p004_2796.trc:
    ORA-00600: internal error code, arguments: [ksmovrflow], [knahs:ddl_string], [], [], [], [], [], []
    Wed Jun 18 13:25:29 2003
    Errors in file c:\oracle\admin\bmdbsb\bdump\bmdbsb_lsp0_2212.trc:
    ORA-12805: parallel query server died unexpectedly
    Wed Jun 18 13:25:29 2003
    logminer process death detected, exiting logical standby
    what can I do?
    thanks

    Hi,
    create pfile from spfile;
    shutdown immediate;
    edit the changes now in pfile
    startup pfile='/////' open;
    spfile is not a binary file, it will not accept any changes but in 10g we have to create
    spfile initialy it runs with pfile until you create spfile.
    regards,
    Nirmal

  • Can we create logical/ physical schema by running any script (unix/window)?

    I wish to create logical/ physical schema in oracle data integrator
    by running any windows or preferably unix script.
    is there any method or scripts provided in ODI?

    I think you could insert info into Matser Respository tables:
    Connect info: snp_connect
    Logical Schemas : snp_lschema
    Physical Schemas: snp_pschema
    Or you may write some sql to do this.

  • Logical/Physical

    Hi
    ABAP/4 Dictionary contains the (Logical/Physical)  definition of the table
    explain

    Hi frend,
    ABAP dictionary contains logical definition of table in the sense that it makes use of different logical databases and search tables to intercorrelate each table table so that it becomes a logically defined tables.
    Regards,
    Ameet

  • RE logical/physical standby database

    1. Why logical standby database is SQL apply, and Physical standby database is redo apply? What ‘s the meaning/objective for that? (pls don’t tell me what is SQL/redo apply)
    2. As we know, a logical standby database can be used for reporting and querying if primary database is down, why we still need a physical standby database (it can’t do that during recovering process, it just a same copy of primary database)? Why not just go ahead to set up only a perfect logical standby database? (just because logical one can’t accommodate all kinds of data type???)
    3. Combined with Real time Apply and maximum protection, we can achieve a zero data loss, but could we achieve a zero downtime? Why or why not?

    Go Through Below link
    >>>Can you convert a Logical standby to a Physical Standby?

  • Physical standby, logical standby which one shud i prefer?

    Hi ,
    how to decide which standby to create that is whether Physical or Logical.
    I want to create it for database failover. so which one i shoul prefer?
    pls give ur suggestions.
    Thanks,
    Kuamr.
    Message was edited by:
    user548258

    Physical standby is the easiest to setup and administer and supports all datatypes. You can use it for reporting (if it's rarely req'd), except for you would have to cancel the recovery, open the db is a read-only mode, and then put it back in the recovery mode.
    Logical standby is a pain, but you can run reports at anytime without canceling recovery. logical does not support certain datatypes, like IOT's, BLOBs, etc.

  • Logical & Physical Standby

    1) Is Logical Standby built up on Log Miner?
    2) Is it not possible to use Logical Standby without turning on supplemental logging?
    3) Is there any relationship between LGWR & LNS in Log Transport Mode?

    1) Is Logical Standby built up on Log Miner?
    2) Is it not possible to use Logical Standby without turning on supplemental logging?
    3) Is there any relationship between LGWR & LNS in Log Transport Mode?The short answer is Yes to all questions.

  • Create a standby logical database in 10g

    Hi,
    My OS is Windows 2003, using oracle 10g software.. I want to know steps to create a logical standby database from primary database? I read the Dataguard concepts and administration guide, its confusing where it says to add the roles for primary and standby database in init.ora file? Could someone please provide steps to configure...
    Thank you.

    If you need the entire database to a single location ... use Data Guard.
    If you need to specify tables, columns, schemas, rules, and are in a
    publish-subscribe situation use Streams.
    Both are share a common architecture.
    refer this for comparison,
    http://www.heysky.net/digest/2009/07/comparison-between-features-rac-dataguard-streams-advanced-replication-and-basic-replication.html
    Thanks

  • DataBase Adapter Rollback option for Logical/Physical Delete in SOA  11g

    Hi All,
    We have a requirement where we need to rollback the logical delete performed by the DB Adapter (after polling a table) if there is any failure in the process down the line. We are trying to implement this using Mediator or OSB. For example if we are polling a table for changed records and performing logical delete, down the line if the business service (OSB) or the external reference (Mediator) are down/faulted, the records which were logically deleted are not getting rolled back in the table. Would any one please let me know if you have come across the same kind of scenario?
    Is there any property we need to set while configuring the polling DB Adapter?
    Thank You.

    Thank you very much for the reply Anuj,
    I have created a db adapter which polls on a table with logicaldeletestrategy in JDeveloper 11g,
    then I imported the XSD, mapping.xml, wsdl and JCA file into OSB using OSB consol. In the console
    I generated proxy and wsdl for that proxy using JCA file. Then created one more db adapter in JDev
    which inserts the records polled by the first db adapter into another table, followed the same
    process of importing the above mentioned 4 files and generated a business service. In proxy service
    route node I am using a transformation (which also I imported from Jdev) to route the data polled
    by proxy service to the business service. Here I am using an XA datasource both the JCA's also
    I made the 3 changes reccommended by Arun but still I am not getting the results.
    I tried physical delete same issue with that too. When I am doing physical delete the proxy service
    atleast picking up the records and deleting them. But when I tried logical delete the proxy is not even
    picking up the records. Am I missing anything here?
    Thank You,
    Edited by: user12237005 on Apr 7, 2011 2:17 PM

  • Trying to import .dmd file and want to see the logical & physical diagram

    Can some one guide me how to import a .dmd file which i got from client. In my local machine i downloaded datamodeller and installed.
    When i am trying to import the same, i am not able to see any logical or physical relationship diagram.
    Thanks inadvance..

    Hi,
    As well as the .dmd file, the folder containing the .dmd file should also contain a folder with the same name - e.g. MyModel.dmd plus folder MyModel.
    If you've only got the .dmd file, you will need to get the associated folder and all its contents as well - the most convenient way is to get your client to use Winzip to zip up the .dmd file and its companion folder.
    You can then unzip it and open the .dmd file in Data Modeler, using Open on the File menu.
    The Logical and Relational diagrams should then be shown on the Logical and Relational tabs in Data Modeler.
    David

  • Logical & Physical File path

    Hi Gyes,
      In selection screen i will enter <b>logical file path</b>.After executing this program i want <b>physical file path for that particular logical file path</b>(input).Is there any function module is there.
    Thanks and regards,
      Suresh.

    hello,
    Use the function Module
    Call function  FILE_GET_NAME
    CLIENT                          200
    LOGICAL_FILENAME    <enter your logical file name>    
    OPERATING_SYSTEM                WINDOWS NT
    PARAMETER_1
    PARAMETER_2
    PARAMETER_3
    USE_PRESENTATION_SERVER
    WITH_FILE_EXTENSION
    USE_BUFFER
    ELEMINATE_BLANKS                X
    Reward points if helps.
    Thanks,
    Krishna

Maybe you are looking for