Standby Mode - Use it or not

Do you guys put your ATV in standby mode (Play/Pause button for 6 seconds) when you're not using it, or do you just let it run?
I did not know about standby mode so I've been letting it run in the background and just watching other sources.

Presumably, there is less power demanded when you are in "standby" mode - if you just switch to another source then it'll just be cycling through the screen saver over and over. If there is any power differential, and since it's a super fast "wake up", then you're better off (and will save $$$) by doing the 6 second standby.
Does anyone know if there is a power differential between the two modes?

Similar Messages

Asr-group feature in active/standby mode

Hi ,
I would like to know if anyone had used asr-group freature in active/standby mode. Is it not recommended by cisco for active/standby mode ? The feature works in both environment.
Thanks in advance
Tomy

Hi Tomy,
The asr-group feature on the ASA is only supported in Active/Active failover:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/ha_active_active.html#wp1271955
-Mike

Deploying applications to a server in a StandBy mode

Using WLS 8.1 SP2
Local Win 2k machine.
I have a some questions regarding re-deploying applications to a Managed Server,
in a StandBy mode, using either the Admin console or the weblogic.Deployer utility.
(I have configured the Domain Wide Admin Port and managed server starts fine in
the StandBy mode).
I noticed that I can deploy new applications using both the console and the deployer
utility. These applications get deployed after the server resumes (understandable).
However, both the deployer and the Admin console do not realize when to return
the results of the action. By this I mean, the admin console continues to spin
even after I resume the managed server
and the deployer utility never returns.
While re-deploying the same thing happens when using the Admin console, but the
deployer utility does not work. It complains that I need to deploy the application
first before I can re-deploy it, even though the application is already deployed.
Based on this, I was wondering if anyone has got this to work succesfully. If
so, can you tell what steps to follow.
Both the Admin and the managed server are on the same machine.
Thanks,
Ketan.

Check this link... It will help you
How to store image in file system, client/server architecture form 6i ?
If someone's response is helpful or correct, please mark it accordingly.

HT202124 Is plug in a USB wireless receiver (Logitech Unifying Receiver) prevents Macbook Pro Retina going to standby mode?

As the title implies, is this prevent Macbook Pro Retina (Mid 2014) from going to standby mode? It's not convenience to unplug the wireless receiver every time I don't use the notebook though.

That kind of panic can be caused by an adapter for an external display that isn't connected to anything. See this thread.
There are also reports that the panic may be triggered by waking an external display from sleep. To test that theory, open the Energy Saver preference pane and click the lock icon to unlock the settings, if necessary. Move the Display sleep slider all the way to the Never position on the right. See whether there's any change.

Monitor never leaves standby mode

I posted this in response to another thread, but after reading that original thread I realized our issues were different enough that I should probably post my own.
P4 2.6 (OEM heatsink/fan)
Antec Sonata Case (380w PSU)
1gb (matched pair of 512mb x 2) Kingston HyperX DDR 400 RAM
MSI FX5600 AGP card
Maxtor Diamondmax 120gb SATA
Viewsonic af70+ monitor
I have checked and re-checked all connections. All fans on the motherboard are running when power is turned on. I do *not* have the keyboard or mouse connected.
The monitor, however, never leaves standby mode.
I've tested the monitor and the AGP card in another machine and they work fine. I've tried the new monitor in the new machine with 2 other AGP cards that I know work, and my result is the same... the monitor never leaves standby mode.
Do I not have something connected properly? My first thought was the AGP card was bad, but I've tested it in another machine and it works perfectly. My second thought was the AGP slot was bad, but something like that is so rare that I find it hard to believe.
I'd rather not ship the motherboard back and wait 3 weeks for a replacement if I don't have to.
Any help would be greatly appreciated.

Quote
are you taking the
I've no idea what that means.
Sorry, didn't realize I was spelling your name incorrectly. It was simply a typo, nothing intentional.
I do appreciate the help though.

3000H series-in standby mode

My computer got very loud like it was racing while in standby mode and it would not come out of standby when I hit a key.
I also could not shut it down. I had to pull the plug to shut down. When I put the plug back in and restarted it was fine except my desktop photo was gone.
I purchased new 1 wk. ago.
HELP!
Peggyfig

Do not hesitate to return it and get a replacement.
Period.

Should Apple TV be put into standby mode when not in use?

Anyone,
When I am done watching Apple TV, should I put it into standby mode or leave it on? Just want to take of my new favorite toy!!!!

I tend to leave them on all the time - standby mode isn't particularly low power as lots of things are still active.

How do i figure it out what app use the cellular data in standby mode?

How do i figure it out what app use the cellular data in standby mode? I disabled the cellular data for 3 days, and my battery last longer. I don't use push notifications, neither location services. I'm not signed in in skype or any IM app.

Do you use push email? Do you have accounts that have synchronized calendars associated with them? Those features will still use cellular data in the background as the receive mail and send or receive calendar updates.
Some notifications, like push notifications from Facebook and other social networking sites may use cellular data in the background. Basically, any automated data task like those may use cellular data when the phone is in standby (note that wifi would be used if available when the phone is active, but wifi turns off in standby and all data goes through the cellular data connection).

Standby mode? Not mine

I don't care how long I leave my appleTV running untouched, it doesn't ever go into standby mode--just keeps running the screensaver all night and all day long.
What do I actually have to do to make it go to sleep mode?

here in europe many people use something akind to this one
http://www.amazon.co.uk/OneClick-DSK105-Intelliplug-Desktop-version/dp/B000MPJSL 0
there is a main plug which the tv goes into
and when it detect the tv goes into standby
it automaticly short off power to the other
devices connected to the power bar
it works ok for appletv and other devices which eat power
when not used or in standby
when the tv is turned on then it turn on appletv and other connected devices

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

Hello-
I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
A quick comparison of systems:
Mine:
HP dc7700s desktop
Windows XP OS
Adobe Master Collection CS3
Hers:
IBM compatible laptop
Microsoft Vista
Adobe Premiere Pro CS3
Adobe Photoshop CS3
I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
Thank you!

>project will be opened in Desktop mode
I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
What is the codec and properties of the files in that project?
Are you sure they are 100% standard?

Use Macbook Pro 17" CTO leave it by standby mode cameback turn on nothing

when I got problem I just go to outside my room and leave it by flip monitor off in standby mode and then when I came back and flip it on monitor it just dark but light on botton still have I try anything to open it but still nothing
I bought Macbook pro 17" CTO just pass 1 year for 3-4 month and got logic board problem or 8600GT problem. I don't know which is right
but I know one thing when I bought this macbook pro CTO mostly expensive that I bought
I think I paid over than 3,500$ for this macbook pro cto
and then apple company respond me that have to pay about 1,000$ for repair this
I think apple company should come out for respond this problem
because I am one of customer don't want to pay over 3,500$ for using 1 computer by one year and this problem I havent do anything I just leave it.

Active Profiles:
Battery Power                    -1*
AC Power                    -1
Currently in use:
halfdim          1
sms                    1
hibernatefile          /var/vm/sleepimage
gpuswitch          2
disksleep          10
sleep                    0 (imposed by 223)
hibernatemode          3
ttyskeepawake          1
displaysleep          5
acwake                    0
lidwake          1
Also I broke down and called support again this time a senior advisor's boss recorded the events and sent the data to their "engineering department" still waiting on the results hopefully they will get back to me sometime between today and saturday. will post the results of the tests. also this is a 2011 17in intel i5

Mail is not sending after standby mode!

Hello.
My problem is that mail after reactivation from the standby mode is not sending emails anymore,
to send emails again i need to deactivate and activate again the internet connection ore restart the mac.
I had the same problem already with my old mac with lion. Is there a fix for this problem?
iMac Retina 5K with OSX Yosemite 10.10.2

I had the same problem with a satellite A100. I did the following:
1. Go to control panel
2. In classic view select system
3. go to tab Hardware
4. Select device manager
5. Open the "universal serial bus controllers" (via )
6. Double click USB Root Hub
7. select tab: "Power management"
8. unselect allow the computer to turn off this device to save power
9. My computer has several USB Root Hub. I repeated 6 till 8 for all
10. I restarted the computer, but don't know if this is necessary.
After this the problem was gone. Enjoy

Iphone does not ring in standby mode

my father has an iphone 3G,
and it will not ring in standby mode.
it worked perfectly when he was on 2.0,
but when he upgraded to 2.1 it started having some problems.
now he has 2.2.1 and the only problem it has is it will not ring while in standby.
it will only ring when unlocked.
is anyone else having this issue,
and does anyone have any way to fix it?
i dont know if it is irrelevant or not,
but he is on windows XP.

I was having the same problem and did a couple of "restores" and the issue kept coming back, after several calls and not much help I decided to delete an application that I had downloaded which was "Ski jump lite" and the problem has gone away. It worked fine on the previous version of apple software.
Regards
Steve

Standby Mode - Use it or not

Similar Messages

Maybe you are looking for