Standby mode

Does GPS go off or stay on in stsndby mode? How about Verizon connection?

Pull the power plug on back of the cable box and wait 10 seconds. Plug the power back in and wait for the cable box to reboot. Check to see if it is fixed now.

Similar Messages

Iphone 6 randomly shutdown in standby mode

My Iphone 6 16gb randomly shutdown in standby mode, i only can turn it on by hold POWER + HOME. here is the log :
{"name":"Reset count","bug_type":"115","os_version":"iPhone OS 8.1 (12B411)"}
Incident Identifier: F0B79DBE-0BE1-431A-813E-70E7E2C17942
CrashReporter Key: 7305c452a84bf7ce3738c4bedf794c8e76fc4c58
Date: 2014-11-24 09:17:58 +0700
Reset count: 1
Boot failure count: 2
Boot faults: wdog btn_rst
Boot stage: 32
Boot app: 2681261667
Is this a hardware issue or software issue? thanks

Hi hnguyen1982,
If you are having an issue with your iPhone shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

7.3.2.6 crashes when coming out of standby mode

Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.

Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

IPhone 5 battery draining after iOS 6.0.2 update even on standby mode without wifi/ 3G at all.

My newly bought iPhone 5 was on iOS 6.0.1
everything worked fine and i had no wifi nor battery issues at all until I upgraded it to iOS 6.0.
i noticed some battery drainage even when i'm not using my phone at all it still drains 1-2% on standby mode with no wifi nor 3G at all in an hour,
If i use wifi it'll drain 4-5% in a few minutes time, more serious case when i use 3G, it's literally draining in EVERY SINGLE MINUTE.

ckuan wrote:
Jonathan wrote:
So my iPhone 5 always had the problem of disconnecting from the wifi signal I was on whenever the iPhone is locked.
Per designed, Wi-Fi will disconnect in sleep mode to save battery.
If you want Wi-Fi to stay connected even in sleep mode, plugin to a wall power socket.
No it's not "per design". It's not supposed to disconnect when locked/in sleep mode. The whole concept of having live notifications to work when your phone is locked is the standard for smartphones. Having this feature only accessable when pluging/charging the phone is rediculous and counter-productive. But it's good to know that I'm not the only one who has this issue. I hope all our issues are solved swiftly, good luck to you all

Samsung Smart TV Remote and Standby Mode

Hi All - A few months ago I got a Samsung Smart TV that came with a pretty nice remote. It really can control almost all aspects of the FiOS service, but there are a few commands I cannot figure out how to get it to send to the FiOS STB.
First off, when I power on the TV, the STB is still in Stanby mode. It asks for me to "Press Menu to Watch ...". I cannot figure out how to get the Samsung remote to send that command or to disable standby mode on the STB. There is no menu button on this remote that's not TV-specific.
Second, I can't figure out how to bring up the full guide using the remote. By pressing the "up" direction on the four-way button, I get some smaller version of a guide, but I would prefer to see the standard full screen guide.
Finally, is there a way to get to the On Demand and DVR menus using the Samsung remote?
Anway, that's the the scoop. Most other featuers (DVR, etc) work pretty well.
The remote I'm using is a RMCTPF1AP1 and the STB is running version 1.9.7 and build 19.45. It's a QIP7232.
Thanks in advance for any guidance on getting this working.
Dave

I'm not sure if you are turning the STB off or if the idle timer is doing it.
No reason to turn the STB off as it doesn't save any energy.
So leaving it on would alleviate one issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Mute button doesn't work to put phone in standby mode, help??

I have a blackberry curve and the mute button will not work to put my phone in standby. It does work to mute a phone call, however. It has done this a couple of times, where it will work for awhile, and then stop working for awhile. I'm not sure if I have hit something to make it so I can't put it in standby mode. Does anyone know how to fix this?

Welcome to the forums
Did you press and hold the mute button? It takes a long key press to work. Also do a Battery Pull:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://store.berryreview.com/product.asp?id=27660&n=QuickPull-Free
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Camera in standby mode...

Hello to anyone that reads this,
Ive a nokia 6280 and have a problem with the camera stuck in standby mode..
Anyone got advice on how to take it off ?..
Ive upgraded the firmware and still no joy..

The carbon or flex might have been damaged. As adamf mentioned, better take your phone to a Nokia Service Center.

Standby mode problem - iPhone 4S

I have an iPhone 4S, 16GB, firmware 5.0.1.
When I click on the stanby button, and the iphone goes to standby mode,
sometimes happens that when I click the stanby button againt it doesn't works
and is blocked with black screen.
The phone fails to resume from standby.
The only thing I can do is keep pressed both power and home button.

Configure the router to do DHCP automatically, try not to hard code the ip address.
1. Try rebooting the router.
2. See if there's a firmware update for your router.
Read this: http://support.apple.com/kb/TS1398

Standby mode problem

anyone ever have this problem wit their S10 netbook where you flip the screen down and the computer goes into standby mode, but after an hour the computer boots itself up and the screen turns on? This has happened to me ever since I got my netbook and I don't know how to keep the computer from waking up. Thanks!
Solved!
Go to Solution.

Hi there...Update to latest BIOS ? and check all settings in ....
Lenovo Energymanagement
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Vista XP Driver all S-Series
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

MAX communication hangs after Standby Mode(with GPIB PCMCIA)

I have a IBM Laptop with MAX 2.2 and a GPIB PCMCIA Card installed. After booting the computer I can communicate with GPIB instruments without problems. After I get the Laptop out of a Standby Mode, MAX can not make any connection to GPIB devices; when I scan for Instruments it hangs as well.
The troubleshooting wizard tells me: one or more GPIB interfaces failed.
Does anyone have the same problems or solutions ?

On the NI-488.2 2.0 download page it is mentioned that that driver does not support standby mode. No such mention is made on the download page for NI-488.2 version 1.7 (which I need to use for my PCMCIA-GPIB interface), although the 1.7 release shows very much the same problem: After stand-by, communication with the GPIB port is no longer possible.
The Visual Basic example tool for preventing stand-by may help those users who are familiar with VB, but it does not help me.
Frankly - what I'd like to see is an improved NI-488.2 version that does support stand-by. Does NI consider providing such an upgrade/patch?

Nokia 6680 Standby Mode Problem

I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

15-Mar-2008 07:57 AM
clairelouise73 wrote:
Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
Prior to it being unlocked it charged up no problem.
If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
If my post has helped you please click the white star on the right

Nokia N9 on Standby Mode Displaying Time

My N9 is displaying time on the standby mode. Is there a way to switch off this feature.
Thanks
Solved!
Go to Solution.

Turn it off in menu->settings->device->display/screen-> wait/standby mode. Sorry for the bad translation. I don't bother to turn on english as it needs a reboot

Ipod and iF2 portable speakers - preventing standby mode kicking in.

I have recently purchased both an iPod video and the Sonic Impact i-F2 portable speakers. There is and auto standby on the speakers which means that if they are 'idle' for more than 5 mins they shut down. Does anyone know how I prevent the speakers from going into standby mode (ie Off!) while I am listening to the music on the iPod?
It's no doubt a very simple thing, but it's driving me mad! Hope someone can help.
Windows XP
Windows XP

i know that the ipod gets charged on some of the other docking speakers, and the speakers don't go into stand by when ipod is playing music because they are providing power to the ipod while the ipod is playing. you may need to contact the manufacturer of the sonic impact speakers for this one.

Which is good: ejecting or standby mode for EHD's?

After a session at the computer, I have this dilemna: how to close down the session. At this present moment of time, I have a thunderbolt, a 2TB FW LaCie, and three Seagate [2 USB] EHD's all connected to my Mac. All the three Seagate drives have been allocated backup roles via CCC and TM.
In this scenario, what should be the manner of my quitting a session at the computer? Will keeping the EHD's in a standby mode for prolonged periods damage them?
Also, I would like to know what is the difference between mounting/unmounting of a drive and ejection of drive?

somanna wrote:
I guess I need to set my own 'protocol' in these matters.
Indeed
somanna wrote:
I need to tackle my own 'temporary laziness' and take time to do these things: eject the thunderbolt drive which I use for editing videos in FCPX. [After doing an 'eject' do I have to also disconnect the power supply by pulling out the thunderbolt cable from the drive? By so doing, the CCC based backup would not take place.
No it should go into standby without disconnecting it.
That is correct, if it is disconnected then CCC will not backup. If you are using the same drive for editing and CCC, then you will need to test it to see if CCC will bring it backup from standby. If not, then maybe that is not a good combination of uses for one drive.
somanna wrote:
My LaCie has a power switch. Is it okay to directly switch it off or do I have to first click upon its desktop icon and eject it? But if I switch off its power, then will CCC automatically start up the power and at its set time backup the data on this Lacie to its concerned backup drive, a Seagate?
No you should first Eject it before Switching it off.
No CCC will not turn it back on.
No
somanna wrote:
The 2 other Seagate drives also have got some functions to do regarding backups. These Seagate drives have no power switches. Should I just eject these drives and keep their power cables on or do I have to also have to remove their power supply cables from the drives after they are ejected.
As with any automated backup, the drive(s) must be connected and powered on in order for the automated backup to take place.
somanna wrote:
Further guidance and instructions in these matters will be highly appreciated.
While I also get a little anal about backup, I do like to save power whenever I can.
To be honest, I would probably only use the Thunderbolt drive for editing and keep one other drive online to back it up. Then rotate the other drives in and out on a daily or weekly basis keeping them off line, off site or at least in a firesafe.
Keep at least one or two aces up your sleeve! Heck' a single lighting strike, power surge or simple mistake could take out everything in the blink of an eye if it's all hooked together and running.

Satellite A300-1NO - Wakes up from standby mode

Hi all!
I have got a Satellite A300-1NO with Win XP pro.
The problem is, that the laptop wakes up from standby mode automatically after about 5 minutes.
I tried to unplug all cables (LAN, usb, etc) but the power plug, but it's the same result.
So what can cause this? What should I try?
thanks.

You should disable the Wake up on LAN function in BIOS and Windows.
Check the BIOS for this option!
You can disable this feature in Windows if you right click on the network card > properties > advanced > wake on LAN
I hope it works for you.

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

Standby mode

Similar Messages

Maybe you are looking for