Standby not applying log - DATAGUARD
Hi pros and gurus,
I have encountered a problem which is i don't know how to solve it is since every single log working just fine. I already done creating RMAN files and instantiate it later. But after i bring up standy for receiving logs from primary and apply it, nothing is happening. At the end of instantiate standby database, i got this error:
RMAN 03015 error occurred in stored script Memory Script
RMAN 06136 ORACLE error from auxiliary database
ora-01180 cannot create data file 1
ora-01110 data file 1 '.../system_1.dbf
is this error affecting my replication? Please help me.
syns wrote:
Hi pros and gurus,
I have encountered a problem which is i don't know how to solve it is since every single log working just fine. I already done creating RMAN files and instantiate it later. But after i bring up standy for receiving logs from primary and apply it, nothing is happening. At the end of instantiate standby database, i got this error:
RMAN 03015 error occurred in stored script Memory Script
RMAN 06136 ORACLE error from auxiliary database
ora-01180 cannot create data file 1
ora-01110 data file 1 '.../system_1.dbf
is this error affecting my replication? Please help me.Can u paste the command which you are running on rman prompt with error message?
Check alert log file ?
Post the steps u are following ...
--neeraj
Similar Messages
-
Dataguard - Primary not applying logs to Standby
Having an issue applying logs to the standby, seemingly it's not setup correctly. I am sure I'm missing something simple here, but would love any input or help. Thanks in advance.
Background:
Primary: CDPMTSB (Single Stand alone)
Standby: CDPMT (RAC)
Error Message on Primary (Alert Log):
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 19:54:24 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'CDPMT'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 19:59:24 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'CDPMT'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 20:00:00 2012
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_j001_17473.trc:
ORA-12012: error on auto execute of job 72620
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "CD_ADMIN.UTDCD_SURVEY_PKG", line 4926
Standby Alert Log:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:32:15 2012
RFS[6]: Assigned to RFS process 4248
RFS[6]: Identified database type as 'physical standby': Client is ARCH pid 9561
Mon Nov 19 19:32:22 2012
RFS[1]: Selected log 6 for thread 1 sequence 4073 dbid 1629723947 branch 769881773
Mon Nov 19 19:32:22 2012
Archived Log entry 1097 added for thread 1 sequence 4072 ID 0x62e7f5cf dest 1:
Archived Log entry 1098 added for thread 1 sequence 4072 ID 0x62e7f5cf dest 3:
Mon Nov 19 19:34:23 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:38:12 2012
RFS[1]: Selected log 5 for thread 1 sequence 4074 dbid 1629723947 branch 769881773
Mon Nov 19 19:38:12 2012
Archived Log entry 1099 added for thread 1 sequence 4073 ID 0x62e7f5cf dest 1:
Archived Log entry 1100 added for thread 1 sequence 4073 ID 0x62e7f5cf dest 3:
Mon Nov 19 19:39:23 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:44:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:49:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:54:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:59:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Primary Parameters:
NAME TYPE VALUE
log_archive_config string DG_CONFIG=(CDPMT,CDPMTSB)
log_archive_dest string
log_archive_dest_1 string LOCATION=USE_DB_RECOVERY_FILE_
DEST VALID_FOR=(ONLINE_LOGFIL
ES,ALL_ROLES) DB_UNIQUE_NAME=C
DPMTSB
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=CDPMT VALID_FOR=(ONLIN
E_LOGFILES,PRIMARY_ROLE) DB_UN
IQUE_NAME=CDPMT
log_archive_dest_3 string location="+FRA_DG_01/cdpmtsb/s
tandbylog", valid_for=(STANDB
Y_LOGFILE,STANDBY_ROLE)
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string ENABLE
log_archive_dest_state_4 string defer
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 7
log_archive_min_succeed_dest integer 2
log_archive_start boolean FALSE
log_archive_trace integer 0
Standby Parameters:
NAME TYPE VALUE
log_archive_config string dg_config=(CDPMT,CD PMTSB)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RE COVERY_FILE
_DEST", valid_for= (ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=cdpmtsb LGW R ASYNC VAL
ID_FOR=(ONLINE_LOGF ILES,PRIMAR
Y_ROLE) DB_UNIQUE_N AME=cdpmtsb
log_archive_dest_3 string LOCATION=+FRA_DG_01 /CDPMT/STAN
DBYLOG VALID_FOR=( STANDBY_LOG
NAME TYPE VALUE
FILES,STANDBY_ROLE) DB_UNIQUE_
NAME=CDPMT
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
NAME TYPE VALUE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 30
NAME TYPE VALUE
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
SQL> show parameter log_ar
NAME TYPE VALUE
log_archive_config string dg_config=(CDPMT,CDPMTSB)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RECOVERY_FILE
_DEST", valid_for=(ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=cdpmtsb LGWR ASYNC VAL
ID_FOR=(ONLINE_LOGFILES,PRIMAR
Y_ROLE) DB_UNIQUE_NAME=cdpmtsb
log_archive_dest_3 string LOCATION=+FRA_DG_01/CDPMT/STAN
DBYLOG VALID_FOR=(STANDBY_LOG
NAME TYPE VALUE
FILES,STANDBY_ROLE) DB_UNIQUE_
NAME=CDPMT
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
NAME TYPE VALUE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 30
NAME TYPE VALUE
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
SQL>
DGMGRL> show configuration verbose;
Configuration
Name: cdpmtqa
Enabled: YES
Protection Mode: MaxPerformance
Databases:
cdpmtsb - Primary database
cdpmt - Physical standby database
Fast-Start Failover: DISABLED
Current status for "cdpmtqa":
Warning: ORA-16608: one or more databases have warnings
DGMGRL> show database verbose CDPMT
Database
Name: cdpmt
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: APPLY-ON
Instance(s):
CDPMT1
CDPMT2 (apply instance)
Properties:
DGConnectIdentifier = 'cdpmt'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName(*)
SidName(*)
StaticConnectIdentifier(*)
StandbyArchiveLocation(*)
AlternateLocation(*)
LogArchiveTrace(*)
LogArchiveFormat(*)
LatestLog(*)
TopWaitEvents(*)
(*) - Please check specific instance for the property value
Current status for "cdpmt":
Warning: ORA-16809: multiple warnings detected for the database
Any help would be really appreciated. Thanks!
Edited by: 972075 on Nov 19, 2012 3:09 PMThanks MSEBERG,
Here's what I found. FRA seems to have enough space on ASM and there are other logs there, not sure what the issue is:
14:31:58 SYS: CDPMTSB> show parameter db_recovery
NAME TYPE VALUE
db_recovery_file_dest string +FRA_DG_01
db_recovery_file_dest_size big integer 60G
DGMGRL> show database CDPMTSB logxptstatus;
LOG TRANSPORT STATUS
PRIMARY_INSTANCE_NAME STANDBY_DATABASE_NAME STATUS
CDPMTSB cdpmt
DGMGRL> SHOW DATABASE CDPMTSB InconsistentProperties;
INCONSISTENT PROPERTIES
INSTANCE_NAME PROPERTY_NAME MEMORY_VALUE SPFILE_VALUE BROKER_VALUE
DGMGRL> show database CDPMTSB InconsistentLogXptProps;
INCONSISTENT LOG TRANSPORT PROPERTIES
INSTANCE_NAME STANDBY_NAME PROPERTY_NAME MEMORY_VALUE BROKER_VALUE
DGMGRL> show database CDPMT logxptstatus;
Error: ORA-16757: unable to get this property's value
DGMGRL> SHOW DATABASE CDPMT InconsistentProperties;
INCONSISTENT PROPERTIES
INSTANCE_NAME PROPERTY_NAME MEMORY_VALUE SPFILE_VALUE BROKER_VALUE
CDPMT2 DbFileNameConvert DG_01/cdpmtsb, DG_01/cdpmt
CDPMT2 LogFileNameConvert FRA_DG_01/cdpmtsb, FRA_DG_01/cdpmt, DG_01/cdpmtsb, DG_01/cdpmt
CDPMT1 LogArchiveMaxProcesses 4 30 4
CDPMT1 DbFileNameConvert DG_01/cdpmtsb, DG_01/cdpmt DG_01/cdpmtsb,DG_01/cdpmt
CDPMT1 LogFileNameConvert FRA_DG_01/cdpmtsb, FRA_DG_01/cdpmt, DG_01/cdpmtsb, DG_01/cdpmt FRA_DG_01/cdpmtsb,FRA_DG_01/cdpmt,+DG_01/cdpmtsb,+DG_01/cdpmt
DGMGRL> show database CDPMT InconsistentLogXptProps;
Error: ORA-16757: unable to get this property's value
Errors in the Alert (from Primary):
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Tue Nov 20 14:34:43 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'cdpmt'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
DGMGRL> DGMGRL> show database verbose CDPMT
Database
Name: cdpmt
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: APPLY-ON
Instance(s):
CDPMT1
CDPMT2 (apply instance)
Properties:
DGConnectIdentifier = 'cdpmt'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName(*)
SidName(*)
StaticConnectIdentifier(*)
StandbyArchiveLocation(*)
AlternateLocation(*)
LogArchiveTrace(*)
LogArchiveFormat(*)
LatestLog(*)
TopWaitEvents(*)
(*) - Please check specific instance for the property value
Current status for "cdpmt":
Warning: ORA-16809: multiple warnings detected for the database
DGMGRL> show database verbose CDPMTSB
Database
Name: cdpmtsb
OEM Name: CDPMTSB_devdb40.utd.com
Role: PRIMARY
Enabled: YES
Intended State: TRANSPORT-ON
Instance(s):
CDPMTSB
Properties:
DGConnectIdentifier = 'cdpmtsb'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '7'
LogArchiveMinSucceedDest = '2'
DbFileNameConvert = '+DG_01/cdpmt, +DG_01/cdpmtsb'
LogFileNameConvert = '+FRA_DG_01/cdpmt, FRA_DG_01/cdpmtsb, DG_01/cdpmt, +DG_01/cdpmtsb'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'devdb40.utd.com'
SidName = 'CDPMTSB'
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb40.utd.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=CDPMTSB_DGMGRL)(INSTANCE_NAME=CDPMTSB)(SERVER=DEDICATED)))'
StandbyArchiveLocation = '+FRA_DG_01/cdpmtsb/standbylog'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "cdpmtsb":
SUCCESS
Thanks for your help btw, I'm really at a loss here as to what is going on with this. -
ORA-326/ORA-334 Physical Standby DB - Not applying logs
Hi, all, I have a Dataguard, the primary db is a RAC with three nodes, the standby db is a physical standby. the dataguard are all oracle 10.2.0.3 on solaris 9 sparc system
Now, my standby db did not apply the archivelogs,there are some errors in standby alert log :
Thu Jan 8 15:44:31 2009
Errors in file /oracle/admin/xxxx/bdump/whut_mrp0_12863.trc:
ORA-00326:log begins at change 2984028173, need earlier change 2984013192
ORA-00334:archived log '+DGARCH/whut/3_22648_611942629.dbf'
Managed Standby Recovery not using Real Time Apply
Recovery interrupted!
Thu Jan 8 15:44:34 2009
Errors in file /export/home/oracle/admin/whut/bdump/whut_mrp0_12863.trc:
ORA-00326:log begins at change 2984028173, need earlier change 2984013192
ORA-00334:archived log '+DGARCH/whut/3_22648_611942629.dbf'
Thu Jan 8 15:44:34 2009
MRP0: Background Media Recovery process shutdown (whut)
and the archivelogs on the standby db like this :
NAME APP DEL
+DGARCH/whut/3_22651_611942629.dbf NO NO
+DGARCH/whut/3_22650_611942629.dbf NO NO
+DGARCH/whut/3_22649_611942629.dbf NO NO
+DGARCH/whut/3_22648_611942629.dbf NO NO
+DGARCH/whut/3_22648_611942629.dbf NO NO
+DGARCH/whut/3_22648_611942629.dbf NO YES
+DGARCH/whut/3_22291_611942629.dbf YES YES
+DGARCH/whut/2_62553_611942629.dbf NO NO
+DGARCH/whut/2_62552_611942629.dbf NO NO
+DGARCH/whut/2_62551_611942629.dbf NO NO
+DGARCH/whut/2_62550_611942629.dbf NO NO
query the first_change# on the standby db like this :
SEQUENCE# FIRST_CHANGE# APP ARC
22646 2983721221 NO YES
22647 2983911304 NO YES
22648 2984028173 NO YES
23813 2984013365 NO YES
23814 2984118027 NO YES
62546 2984027708 NO YES
SEQUENCE# FIRST_CHANGE# APP ARC
62547 2984163823 NO YES
23815 2984132128 NO YES
23816 2984312713 NO YES
62548 2984255538 NO YES
62549 2984312692 NO YES
22649 2984028196 NO YES
23817 2984351070 NO YES
then ,how to fix the dataguard and apply the archivelog on standby db ?
why I can found 2984028173 with 22648,but can not found 2984013192 ??
and why there have three 22648 with different applied status and deleted status on standby db ???
Thanks all.Thank you for your reply.
the trc file like this:
/oracle/admin/xxx/bdump/xxx_mrp0_12863.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /oracle/product/10.2.0/database
System name: SunOS
Node name: stdb
Release: 5.9
Version: Generic_122300-25
Machine: sun4u
Instance name: xxx
Redo thread mounted by this instance: 1
Oracle process number: 27
Unix process pid: 12863, image: oracle@stdb (MRP0)
*** SERVICE NAME:() 2009-01-08 15:44:24.179
*** SESSION ID:(197.3) 2009-01-08 15:44:24.179
ARCH: Connecting to console port...
*** 2009-01-08 15:44:24.180 61287 kcrr.c
MRP0: Background Managed Standby Recovery process started
*** 2009-01-08 15:44:29.191 1103 krsm.c
Managed Recovery: Initialization posted.
*** 2009-01-08 15:44:29.192 61287 kcrr.c
Managed Standby Recovery starting Real Time Apply
Recovery target incarnation = 5, activation ID = 721050634
Influx buffer limit = 152383 (50% x 304766)
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Start recovery at thread 3 ckpt scn 2984013192 logseq 22648 block 2
*** 2009-01-08 15:44:31.181
Media Recovery add redo thread 3
*** 2009-01-08 15:44:31.181
Media Recovery add redo thread 1
*** 2009-01-08 15:44:31.182
Media Recovery add redo thread 2
*** 2009-01-08 15:44:31.184 1103 krsm.c
Managed Recovery: Active posted.
*** 2009-01-08 15:44:31.838
Media Recovery Log +DGARCH/whut/3_22648_611942629.dbf
*** 2009-01-08 15:44:31.851 61287 kcrr.c
MRP0: Background Media Recovery terminated with error 326
ORA-00326: log begin at 2984028173, need earlier 2984013192
ORA-00334: archivelog: '+DGARCH/whut/3_22648_611942629.dbf'
*** 2009-01-08 15:44:31.851 61287 kcrr.c
Managed Standby Recovery not using Real Time Apply
*** 2009-01-08 15:44:31.851
Media Recovery drop redo thread 3
*** 2009-01-08 15:44:31.851
Media Recovery drop redo thread 1
*** 2009-01-08 15:44:31.851
Media Recovery drop redo thread 2
*** 2009-01-08 15:44:34.269 1103 krsm.c
Managed Recovery: Not Active posted.
ORA-00326: log begin at 2984028173,need earlier 2984013192
ORA-00334: archivelog: '+DGARCH/whut/3_22648_611942629.dbf'
ARCH: Connecting to console port...
*** 2009-01-08 15:44:34.359 61287 kcrr.c
MRP0: Background Media Recovery process shutdown
*** 2009-01-08 15:44:34.359 1103 krsm.c -
Standby not applying the online redo logs
Hi,
The redo apply process does not seem to apply the current logs to the standby database.
The output from the query
Select last_change#, sequence# from v$standby_log;
LAST_CHANGE# GROUP# SEQUENCE#
4 0
10120537 5 8586
6 0
7 0
gives me the current SCN as that of the primary.
But the CURRENT_SCN from v$database on the standby lags from that of the output above.
Select CURRENT_SCN from v$database;
CURRENT_SCN
10119641
The STATUS and PROCESS information from the v$managed_standby show the following:
PROCESS STATUS SEQUENCE#
ARCH CONNECTED 0
ARCH CONNECTED 0
ARCH CONNECTED 0
ARCH CONNECTED 0
RFS IDLE 0
RFS IDLE 0
RFS IDLE 8586
RFS IDLE 0
RFS IDLE 0
RFS IDLE 0
RFS IDLE 0
PROCESS STATUS SEQUENCE#
MRP0 APPLYING_LOG 8586
Any thoughts on why the standby has not applied the recived logs from the primary?
I am currently using version Oracle 11.2.0.2 for Active dataguard setup. I currently have a primary server and one standy server.
ThanksI had sent the output of the queries in the earlier post. Here it is again
The output for the query
select thread#, max(sequence#) from v$archived_log group by thread#; (on primary)
THREAD# MAX(SEQUENCE#)
1 8585
The output for
select thread#, max(sequence#) from v$archived_log where applied = 'YES' group by thread#; (on standby)
THREAD# MAX(SEQUENCE#)
1 8585
Also the query
select LAST_CHANGE#, STATUS from V$STANDBY_LOG;
gives me the current scn generated at the primary.
LAST_CHANGE# STATUS
10149990 ACTIVE
10146538 ACTIVE
10150844 ACTIVE
But the current_scn from v$database is lagging.
select current_scn from v$database;
CURRENT_SCN
10146535
Also the query
select THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# from v$archive_gap;
returns no rows. So there are no archive logs missing on the standby either.
So I beleive that the RFS has recieved the logs from the primary but the logs have not been applied at the standby.
Thanks -
New standby not applying archive log
I have just created standby database....but its not applying archive log...
when I checked the alerlog file of standby....
ora-19527 physical standby redo log must be renamedyes, I have created at onlien redo logs at standby database..
what is test and test?
i saw one command like this...
log_file_name_convert= ((''/u01/oradata/prod'', ''/u01/oradata/standby''),(''/u02/oradata/prod'', ''/u02/oradata/standby''))
My Primary DB name is OraclePM
My Standby DB name is OracleDR
I have placed all redo logs in direcrtory (D:\oracle\product\logs\ ) the directory structure for both databases is same... I have created 3 additionals redo logs at standby database...
How can I edit my standby init file... -
Hi,
i opened my primary DB using "alter database open resetlogs" after recovering from a power failure crash.
this caused the log sequence number to reset to 1.
when i check the standby DB for maximum log sequence applied, it is showing the last log applied before the crash whereas the primary DB has since the recovery, produced over 200 logs.
how can i get the standby DB to start applying the new log sequence?
regards,
MichaelIf you had opened the Primary with a RESETLOGS to a point earlier than the highest log applied on the standby and you cannot flashback the standby, you have to rebuild the standby.
For example, the Standby has applied Sequence#1411 but the Primary was opened with RECOVER upto Sequence#1409 and RESETLOGS. The Primary has diverged from the Standby so the standby has to be rebuilt.
If however, the last redo applied to the Standby was lower than the RECOVER and RESETLOGS point on the primary, the Standby should be automatically able to continue. In your case, you say that the Standby hasn't continued. Therefore, I suspect the former (Primary RECOVER and RESETLOGS to a lower SCN/SEQUENCE#).
See "9.4 Recovering Through the OPEN RESETLOGS Statement" at http://docs.oracle.com/cd/E11882_01/server.112/e25608/manage_ps.htm#i1026480
Hemant K Chitale -
Standy database MRP0 is not applying logs
Hi all,
i am using oracle 11.1.0.7.0 database on linux
standby database is receving archives but not applying to to standby.
CTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
PROCESS CLIENT_P STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
ARCH ARCH CONNECTED 0 0 0 0
RFS LGWR RECEIVING 1 66141 33298 2
RFS UNKNOWN IDLE 0 0 0 0
MRP0 N/A WAIT_FOR_GAP 1 66003 0 0
PROCESS CLIENT_P STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
RFS UNKNOWN IDLE 0 0 0 0
34 rows selected.
please help to fix this
thank youcheck whether there is any gap using the V$ARCHIVE_GAP view or using the V$ARCHIVED_log on the primary.. Appears that there is a gap...
Thanks,
Vishnu -
10gR2 Logical Standby database not applying logs
No errors are appearing in the logs and I've started the apply process :ALTER DATABASE START LOGICAL STANDBY APPLY but when I query dba_logstdby_log, none of the logs for the last 4 days shows as applied and the first SCN is still listed as current. Any thoughts on where I should start looking?
the latest event in DBA_LOGSTDBY_EVENTS is the startup of the log mining and apply.
I do not have standby redo logs so I cannot do real time apply, though I am looking to implementing this. Obviously, this is pretty new to me.Sorry I didn't mention this before, the logs are being transferred, I verified their location on the os and it matches the location in the dba_logstdby_log view.
-
Standby Not Applying After Outage
We have a 11r2 primary and standby running on RHEL 5. The primary lost network connectivity for a time and VMWare locked up. The VM admin restarted the primary VM (it was a hard-boot). This all happened while I was gone and when I came into work, the primary database appeared to be working. I decided to dig deeper and check out the standby.
On the standby...
SQL> select * from v$archive_gap;
Thread#: 1
low_sequence: 123120
high_sequence: 123120
DGMGRL> show configuration
Configuration - prodDB
Protection Mode: MaxPerformance
Databases:
prodDB - Primary database
prodDB2 - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
SQL> select count(*) from v$archived_log where applied='NO';
Count(*): 107
SQL> select process, client_process, thread#, sequence#, block#, status from v$managed_standby where process='MRP0' or client_process='LGWR';
Process: MRP0
Client_Process: N/A
Thread#: 1
Sequence#: 123120
Block#: 0
Status: WAIT_FOR_LOG
Process: RFS
Client_Process: LGWR
Thread#: 1
Sequence#: 128315
Block#: 4686
Status: IDLE
DGMGRL> show database prodDB2;
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 2 days 3 minutes 53 seconds
Apply Lag: 2 days 3 minutes 53 seconds
Real Time Query: OFF
Instance(s): prodDB
It appears all is well (just very far behind) but when I run the last code block (show database prodDB2;) again ...
DGMGRL> show database prodDB2;
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Apply Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Real Time Query: OFF
Instance(s): prodDB
...it looks as if the massive backlog is just increasing. How can I confirm that everything that things are going well? I am still learning Data Guard.
Thank youHello;
It shows 9851 logs behind. If you created the standby more than once then the query could be giving incorrect information. If this is the case then check from the standby. For example
PRIMARY SIDE
/home/oracle:PRIMARY >sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.3.0 Production on Thu Sep 5 16:14:06 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
MAX(SEQUENCE#)
766
SQL>
STANDBY SIDE
/home/oracle:STANDBY >sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.3.0 Production on Thu Sep 5 16:14:40 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
MAX(SEQUENCE#)
766
If you do this is the difference really 9851?
Best Regards
mseberg -
Hi,
We have dataguard on Oracle 10g. The logs are shipped from primary to physical stand by but when I look at "Last Applied Log" under EM on the primary db, I see 0. The logs are shipping but not applied to physical stand by.
I restarted the standby to mount stage.
I can tnsping both the database from other servers
***** on primary *****
SELECT name, value FROM gv$parameter WHERE name = 'log_archive_dest_state_1';
NAME
VALUE
log_archive_dest_state_1
enable
SELECT name, value FROM gv$parameter WHERE name = 'log_archive_dest_state_2';
NAME
VALUE
log_archive_dest_state_2
ENABLE
SELECT name, value FROM gv$parameter WHERE name = 'standby_archive_dest';
NAME
VALUE
standby_archive_dest
select status, error from v$archive_dest where dest_id=2;
STATUS ERROR
VALID
select switchover_status from v$database;
SWITCHOVER_STATUS
SESSIONS ACTIVE
select protection_mode, protection_level, database_role from v$database;
PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE
MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PRIMARY
SELECT MAX(SEQUENCE#), THREAD# FROM V$ARCHIVED_LOG GROUP BY THREAD#;
MAX(SEQUENCE#) THREAD#
4483 1
SELECT dest_id, valid_type, valid_role, valid_now FROM gv$archive_dest;
DEST_ID VALID_TYPE VALID_ROLE VALID_NOW
1 ONLINE_LOGFILE ALL_ROLES YES
2 ONLINE_LOGFILE PRIMARY_ROLE YES
***** on physical stand by *****
select protection_mode, protection_level, database_role from v$database;
PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE
MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PHYSICAL STANDBY
SELECT MAX(SEQUENCE#), THREAD# FROM V$ARCHIVED_LOG GROUP BY THREAD#;
MAX(SEQUENCE#) THREAD#
4483 1
Can anyone advise what can I check and how can I get the logs to apply on the standy by. The stand by is in mount stage. ThanksThe alert log for primary does not show any errors:
LNS: Standby redo logfile selected for thread 1 sequence 4520 for destination LOG_ARCHIVE_DEST_2
This is in the alert log for standby
Primary database is in MAXIMUM PERFORMANCE mode
RFS[11]: Successfully opened standby log 5: '/u02/oradata/prd1/stby_redo_g5_m1.dbf'
On standby I have the MRP process running:
$ ps -ef|grep mrp
oracle 10957 1 0 15:26:48 ? 0:01 ora_mrp0_prd1
SELECT RECOVERY_MODE FROM V$ARCHIVE_DEST_STATUS WHERE DEST_ID=2 ;
RECOVERY_MODE
MANAGED REAL TIME APPLY
This is from v$dataguard_status
Remote File Server Warning 0 167 0 NO 20-DEC-07
RFS[11]: Successfully opened standby log 5: '/u02/oradata/prd1/stby_redo_g5_m1.dbf'
should I try this as first suggested ?
alter database recover managed standby database parallel 2 using current logfile disconnect; -
Dataguard ,redo log not applied
hi
i am using oracle dataguard 10g .
everything was quit fine . but some days later a problem occured . after sequence 128 log is not applied .
i am using realtime log appled.
can anybody help me .
Thanks in advance
munir .Hi,
Is your standby database a physical or a logical standby ???
Is the standby database in recover mode?
What is the current log sequence number on your primary database?
Place your standby database in recovery mode (if it is not) and restore arhcive logs on the standby database generated after log seq. 128
Regards
Asif Momen
http://momendba.blogspot.com -
Redo log files are not applying to standby database
Hi everyone!!
I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database. I run the following command on the standby database.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
1. How to resolve this issue ?
2.Is it compulsory to have Primary database open ?
3. I have created standby control file by using command
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should I have different database name for both or existing one is correct ?
Can anybody help me to come out from this stuck ?
Thanks & Regards
Tushar LapaniThank you Girish. It solved my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
I did following scenario.
1. Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
Thanks -
Archive log registered,but showing as not applied in standby db + oracle 9i
Hi all,
In my standby database some of the archive log files are not applied.found through the following command
SQL > select sequence#,applied from v$archived_log where applied='NO';
sequence# APP FIRST_TIME
18425 NO 05-FEB-10
but when try to register manually
SQL > alter database register logfile '/disk12/arch/A00123000018425.arc';
ERROR at line 1
ORA-16089:archive log has already been registered.
"recover standby database" also asking for the new archive file. how will i apply that?
any solutions?user11919409 wrote:
I have did that so many times from 05-feb-10 onwards.
even then only one archive gap???
or only one is not applied? if yes may be archive file which exist at standby may be corrupt try to restore it from backup and recover.
also check for some clues at logs at standby and primary.. what actually happen. if archive gap is huge and you have all archvies then you may have to do manual recovery then keep it back to auto recovery mode.
Hope that may help you.
Anil Malkai -
Logs not applying on Standby Database
I am afraid I am back.
I now have a primary database and a standby database and logs are being shipped but not applied. Done some research and I have got to the point where in my alert log I find the following when I try to start MRP:
Fri Jun 29 15:03:40 2012
alter database recover managed standby database disconnect from session
Attempt to start background Managed Standby Recovery process (SAPDS)
Fri Jun 29 15:03:40 2012
MRP0 started with pid=29, OS id=23272
MRP0: Background Managed Standby Recovery process started (SAPDS)
started logmerger process
Fri Jun 29 15:03:45 2012
Managed Standby Recovery not using Real Time Apply
Read of datafile '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf' (fno 2) header failed with ORA-01206
Rereading datafile 2 header failed with ORA-01206
MRP0: Background Media Recovery terminated with error 1110
Errors in file /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_pr00_23308.trc:
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01122: database file 2 failed verification check
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01206: file is not part of this database - wrong database id
Recovery Slave PR00 previously exited with exception 1110
Errors in file /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_mrp0_23272.trc:
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01122: database file 2 failed verification check
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01206: file is not part of this database - wrong database id
MRP0: Background Media Recovery process shutdown (SAPDS)
Completed: alter database recover managed standby database disconnect from session
My question therefore is how can I get out of this and get my logs to apply on standby?Hello again;
Do you think if I tried to repeat the duplicate?
Yes I think you should do this.
Give me a few minutes and I will review my Word document and provide a step by step overview here as insurance.
I always cleanup the standby before trying another dup
OVERVIEW
Step 1 - Password file fro standby - Copy from primary and rename
Step 2 - Directory Structure on the remote server - Make sure noting is missing
Step 3 - Oracle Net Setup - entry for the CLONE in your TNSNAMES.ORA on both servers
Step 4 - SID_LIST_LISTENER addition ( assumes listener named LISTENER )
Step 5 - Timeouts set in listener.ora and sqlnet.ora Both Servers
Step 6 - Initialization Parameter File for the Auxiliary Instance
Step 7 - Set SID for Auxiliary Instance
Step 8 - Create an SPFILE for the new database by using a pfile with the INIT settings
Step 9 - Shutdown and startup nomount on new Spfile ( Auxiliary Instance )
Step 10 - Start RMAN and run the DUPLICATE Command
SID_LIST_LISTENER Example from mine
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
(PROGRAM = extproc)
(SID_DESC =
(global_dbname = CLONE.hostname)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
(sid_name = CLONE)
Prevent Timeouts
Add these to both servers
To listener.ora
INBOUND_CONNECT_TIMEOUT_ = 120
To sqlnet.ora
SQLNET.INBOUND_CONNECT_TIMEOUT = 120
Then stop and start the listener.
RMAN
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
Connect should return something like this
connected to target database: RECOVER9 (DBID=3806912436)
connected to auxiliary database: CLONE (not mounted)RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
INIT Extras
To avoid ORA-09925 make sure the PFILE has audit_file_dest and core_dump_dest set
Best Regards
mseberg
Edited by: mseberg on Jun 29, 2012 11:12 AM -
All logs received but not applied | Physical Standby Database
All,
Need your help....
We have physical standby database setup as below
Primary : 2 node RAC
Stdby : Standalone physical standby database.
When I verify the stdby database status, I could see all the logs are received from primary but still not applied many.. Could any one please help me what is the issue and how to resolve it ...?
Primary :
=====
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1 2 3 4 ;
Thread Last Sequence Generated
1 8073
1 8073
2 4521
2 4521
stdby:
====
SQL> SELECT ARCH.THREAD# "Thread",
2 ARCH.SEQUENCE# "Last Sequence Received",
3 APPL.SEQUENCE# "Last Sequence Applied",
4 (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
5 FROM
6 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN
7 (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
8 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN
(SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
9 10 WHERE ARCH.THREAD# = APPL.THREAD# ORDER BY 1;
Thread Last Sequence Received Last Sequence Applied Difference
1 8073 8055 18
2 4521 4510 11
--Below are tailed messages from standby alert log:
Fri Nov 04 10:45:15 2011
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance BWFCCSTD - Archival Error
ORA-16014: log 6 sequence# 8058 not archived, no available destinations
ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
Fri Nov 04 10:50:15 2011
Archiver process freed from errors. No longer stopped
Fri Nov 04 10:50:15 2011
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance BWFCCSTD - Archival Error
ORA-16014: log 6 sequence# 8058 not archived, no available destinations
ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
Fri Nov 04 10:50:15 2011
Archiver process freed from errors. No longer stopped
Fri Nov 04 10:55:15 2011
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance BWFCCSTD - Archival Error
ORA-16014: log 6 sequence# 8058 not archived, no available destinations
ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
Fri Nov 04 11:00:15 2011
Archiver process freed from errors. No longer stopped
Fri Nov 04 11:00:15 2011
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance BWFCCSTD - Archival Error
ORA-16014: log 6 sequence# 8058 not archived, no available destinations
ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
Fri Nov 04 11:00:15 2011
Archiver process freed from errors. No longer stopped
Fri Nov 04 11:05:16 2011
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance BWFCCSTD - Archival Error
ORA-16014: log 6 sequence# 8058 not archived, no available destinations
ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
Fri Nov 04 11:05:16 2011
Archiver process freed from errors. No longer stoppedPrimary:
=====
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination +ASM_FRA01
Oldest online log sequence 8073
Next log sequence to archive 8074
Current log sequence 8074
SQL>
Stdby:
=====
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination ?/dbs/arch
Oldest online log sequence 8074
Next log sequence to archive 0
Current log sequence 8074
Enough space is available :
=================
SQL> set lines 180 pages 50000;
SQL> set lines 100
col name format a60
select name
, floor(space_limit / 1024 / 1024) "Size MB"
, ceil(space_used / 1024 / 1024) "Used MB"
from v$recovery_file_dest
order by nameSQL> SQL> 2 3 4 5 ;
NAME Size MB Used MB
+ASM_FRA01 70000 531
Edited by: 889828 on 2011/11/04 2:26 AM
Maybe you are looking for
-
Tabbed Panel - prevent page content being pushed down
What is the setting to prevent an open tab from pushing content down that is below it. Rather, just have the tabbed content be presented above the content on the page. In other words, have it behave like a menu bar with drop down boxes. Thanks for an
-
Email on Idoc Failure with Status 56 64 68 69 70
We have standard inbound idoc processing for Basic Type : DELVRY01 and Message Type : DESADV using the function module IDOC_INPUT_DESADV1. We currently have a requirement to send an email, when any of these type of Idocs fail with status 56, 64, 68,
-
Hi, I want to use the form I developed in a book, it is a Travel Log sheet. THe forms data will be exported to a spreadsheet. I Want to also go the other way and use some data from the spreadsheet into the form, the date. Unless acrobat can populate
-
Distributed Cache gets are very time consuming!!!!!
We have an application that uses Coherence as a distributed partitioned cache server. Our problem is that the access to the near cache is very fast but the access to the remote servers is very cpu consuming (maybe for the deserialization of the objec
-
Command or utility to archive files unmodified in over 730 days
Hi, I need to find a way to archive files that are over 2 years old, ideally on a weekly basis, and have them moved to an archive volume, maintaining folder structure. I'm not good at writing scripts, and beyond that, even once i locate all of the fi