Standby/Sleep System and Display Problems

Hi all,
Installed 4 times WIndows 7 Ultimate x64 besides Max OSX Snow Leopard
And have de folowing problems
- Manual sleep works
- Manual hibernation works
- Manual start screensaver works
- Automatic after a couple of miniutes: Screensaver will not start
- Automatic after a couple of miniutes: Standby modus screen will not start
- Automatic after a couple of miniutes: System will not go to sleep modus
- Automatic after a couple of miniutes: System will not go to hibernate modus

I did install: new intel chipset drivers, but the problem = still there
I tried to install de ATI AMD drivers, but this will not update the display driver version.
Using de apple keyboard and the magic mouse
Message was edited by: cateyenl

Similar Messages

2x iMac G5: Both Logic Board and Display Problems, Warrenty?

Hello,
Thank you for looking at this topic.
I am Jeroen from The Netherlands and proud owner of several Mac Mini's, iMac's and Macbook's. I have 2times the iMac G5, a beautiful machine, but both not working since 2 months.
I have two times the iMac G5 with iSight, both have logic board and display problems.
The first iMac doenst start at all, black screen, i hear the chime, but nothing happening. After a minute i see one horizantal white stripe but nothing happens.
The second iMac has weird horizantal stripes also, but the computer starts. It gives a finder and questionmark icon. After a while the fans go crazy.
Both these symptons are widely known on the internet. I would like to get this fixed, but prices are crazy. And because this is a common issue I would expect to get this fixed for no costs. I have contacted several Apple resellers but they shown me high prices and bad services. On these forums I've saw people in the USA who get this fixed free of charge.
Does anyone has any advice for me? I'll call apple USA this morning.
Thankyou for ur time.

Welcome to Apple Discussions.
I know of no repair extension authorization which provides for the repair of either computer you describe beyond its original 12 month period of coverage. If either machine is covered by a warranty extension program provided by AppleCare, then the parts, labor or both required to replace the defective components may be offered at no charge to you. Final determination of eligibility is made at the part level by authorized Apple service providers or dealers and by the specific serial number of the machine submitted for service.
Absent a warranty extension, however, it is quite likely that you will have to pay for the repairs is you elect to have them performed.

Timeline - Cannot Move Tracks and Display Problem

I've created about a ten-minute timeline that I'd really prefer not to toss out because a lot of work went into creating parts of it and getting the timing right with the music, etc. When I first open the project in Premiere Elements, everything seems okay - my timeline plays with all transitions and I can scroll around in the timeline. However, I appear to have done something where whenever I click and drag to try to move a track, the timeline goes insane. I get a circle with a line through it for a cursor and a blank tooltip window, whether I try to drag the track horizontally or vertically. After that, while the timeline will still play, the timeline itself gets all wonky in its display, almost as if the video isn't refreshing on it. (It's kind of like the timeline has crashed.) I attached a screenshot of what it looks like. Whenever I move my cursor to the edge of the timeline, the timeline scrolls in that direction.
I'm running Premiere Elements 7 Educational Version on a Core 2 Duo laptop with 3GB RAM, an Intel 965 graphics chip (latest Intel drivers are installed), and Vista Business 32-bit. The clips are from a standard DV cam (not HD), and there are some PNG format stills and MP3 sounds mixed in there as well. There are three active A/V tracks. I think that's all the relevant information, but ask me if you need more.
Can anyone tell me what I've done and/or how to fix this?

Good morning every one!
The bad news: As expected the problem does still occur. The good news: I was able to track it down to one clip in the timeline.
To save others time, I will described what I have evaluated quite detailed in the following paragraphs...
As it seemed to me that deactivating the Windows indexing service made the usage of PrE more stable I thought that maybe file locks would cause the trouble. So I verified this by opening the project in PrE, writing and executing a small Java application that puts an exclusive file lock on one of the files from the project and tried to move the according clip in the timeline. It worked without any problems and the known symptoms did not occur. So we can put aside the file locks.
Afterwards I tried to reproduce the problem by playing around with the scene that caused problems last week. I tried by moving around the video clips and the problem did not occur. Then I remembered my statement I have made earlier, that the problems seemed to occur as I started to work with titles and music clips -- and bingo: I have three music clips in my "soundtrack" track and one of them seems to cause the whole trouble. After I have clicked on this specific music clip, the problem occurs and it is no longer possible to move anything in the timeline and the strange behaviour regarding the automatic scrolling when the cursor is at the left/right etch is activated.
It was easily reproducable: Restart PrE, open my project, move a video clip to verify that moving clips works, click on the specific music clip and the problem occurs. I have tried this several times and each time the problem occured. When I clicked on one of my other two music clips everything was fine -- same for the video clips I tried. So in my case it seems to be this single clip.
OK, what's specific regarding this clip: All my music files are placed on a share on my Windows home server (in contrast to the video footage which is located on the local HD). So I moved the "dangerous" music file to the local HD, changed the path to the file with a text editor directly in the PrE project file (which is a simple XML file) and started up PrE again. I verified that PrE takes the file from the local HD (server was down), but the problem did still occur. So it is not a network issue.
The next specific thing is, that this music file is the only file in my project which is a .wma-file -- the others are .mp3-files. So I did three things:
At first I downloaded the project file provided by SQFreak2 in this thread and checked whether he is also using .wma-files. The result: He does not use them.
As the second thing I again changed my project file in the text editor: I changed the path of the music clip to some other .mp3-file. Afterwards I opened up PrE with that project file, used the playback to verify that the other music file is referenced by the clip instead of the original wma-file and then tried to move the clip -- again the symptoms occured.
As the last step I created a new project, added the "problematic" wma-file, placed it on the "soundtrack" track and afterwards tried to move it. The result: No problems at all.
So it neither seems to be a generic problem with wma-files nor does it seem to be a file-specific problem at all.
Lets summarize the things from above: File locks do not cause any trouble. In my project a single audio clip seems to cause the problem. The problem seems to be caused by the clip and not the file referenced by the clip (no matter whether local or server based, wma or mp3, the problem occurs in every case).
What I have learned? Well, I am not sure. But in the meanwhile I am quite sure, that it hasn't to do anything with hardware and drivers, but that we are dealing with a bug in PrE that occurs in specific project cirumstances.
This morning I have got some additional ideas I would like to try to track the problem down (e.g. the problematic clip has a transition for a fade out in the end [when I did this I didn't knew, that a fade out could be easily achieved in the clip's properties] -- I will try to remove this one and look what will happen).
P.S.: In one of my earlier posts I stated the assumption that the problem occurs as soon as I move the mouse cursor over the vertical scroll bar of the timeline -- but this is definitely not the case.

Image: display from local drive, upload to server file system, and display from server

Hello,
I am using jdev 11.1.2.4.0...
The requirement is that users would like to upload images from their local drive to server drive and they would like display images from server drive later.
We don't want to keep images in database. I am not sure what the solution should be; however, I plan to ....
1. create a table to keep an information of images -- image_id, image_location (server drive), image_filename
2. create a page where users can enter image information and specific filename from a local drive (I think I will use inputFile component) and provide the preview button to display an image on screen before save it. To save data is to save information to the database and copy an image file to the server drive (the destination location for image files is predefined.)
3. create another page where users can browse information from the database and display an image for a selected record by getting from the server.
I need suggestions on...
1. how to display an image on page from the local drive?
2. how to copy a file from a local drive to a server?
3. how to display an image on page from the server drive?
Thank you.
nat

See:
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-1/
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
http://tompeez.wordpress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-3/
Where Timo saves images to the database, you save it to the file system (examples on how to do this from Java are available plenty if you just Google for it). Similar to Timo you then use the image tag to display images. The difference is that you can directly add the URL from the database table.
The benefit of using a database to host images is that you are not dependent on file server structures though
Frank

Flex 4.5, destructionPolicy="never" and display problem

Hello,
in my firstView I have destructionPolicy="never", when in my secondView I click on the back hardware button, return in the firstView, if the orientation phone change, I have a display problem : the background appear and the spark component scroller doesn't work on my android phone.
Thanks.

Known bug. https://bugs.adobe.com/jira/browse/SDK-30126

System Preferences crashes, and display problems

I have an early model 2008 MacBook Pro (MacBookPro4,1). Just got it yesterday (refurbished).
Downloaded and installed the 10.5.6 upgrade last night.
When running software upgrade today, the computer said it needed to shut down.
Now when I open any of the system preferences, it does not open them and asks if I want to restart system preferences.
When I boot, the desktop image does not display. When windows get opened, the desktop image show up in a rectangle around that window. So bit by bit I get most of the desktop image.
The computer seems much slower than last night, especially when scrolling up and down in Safari.
When I grab a window and move it around the screen, it refreshes about twice a second, which is not good.
I checked TimeMachine, but it has not been configured yet.
Any advice?

The Apple expert says I should try running under a new user, or reinstalling the (old) OS (archive and install). I'm not near my computer at the moment so I cannot try these things. However, they seem a bit drastic given I have shown that SafeBoot works.
Is there not a boot mode that lets run the 'normal' boot items one by one?
I don't know what to change to make normal boot work, and the Apple expert also couldn't tell me. It seems SafeBoot may have fairly limited usefulness??
I don't have any files in \library\startupitems or \system\library\startupitems or \library\extensions. Naturally I've got heaps in \system\library\extensions, but they all seem to be Apple files. The only ones that have been updated since I got the computer are:
system.kext
ipfirewall.kext
iopcifamily.kext
iondrvsupport.kext
iographicsfamily.kext
appleintegratedframebuffer.kext
appleintelgmax3100fb.kext
I'm not keen on deleting any of these as I read it might stop the computer working at all.
Does anyone have more information on what I can change to try to get normal boot to work? Or what I can run to see what the difference in between normal and safeboot?

Entourage and display problem

Since the 10.4.4 update I have been having strange problems with Entourage (Microsoft Office email client).
After the program has been running for a while (varies between a few minutes and a few hours) the "Hide" command doesn't work properly. When I "Hide" the program, the windows do not disappear, although the program menubar does hide and another application becomes "active."
Once switching back to Entourage, certain window elements no longer display correctly. Different buttons (i.e. "Send" the drop down menu for the from address on replies, etc.) are "greyed out" although some do work in this greyed out state.
I wasn't sure where else to post this question. Searching on google and this forum doesn't seem to reveal anyone else with the same problem. Any ideas?
--Joe

The fact Excel is affected too, sounds to me
somewhere along the line you either accidently moved
a file or deleted or renamed one or a few of
Microsoft Office's documents. My suggestion is
this.
That was my original thought. As mentioned, I already completely removed and re-installed Office. On the first run of Excel (both before and after a "Fix Permissions) the problem was there. Entourage doesn't exhibit the problem immediately, but it did come back in a short time. If something is moved or corrupted, it is not something that the Office installer will fix or replace.
Backup all your data. Note, Microsoft Entourage
stores its data in your Home -> Documents ->
Microsoft User data folder.
Run the office uninstaller found in your Office
application folder.
Reinstall Office.
The hardware test is found on your restore disks that
came with your Mac and is bootable much the same way
the Powerbook hardware test volume is:
http://docs.info.apple.com/article.html?artnum=86287
I am traveling now, but will give the hardware test a try when I get home and have access to the boot CD.
Thanks.

Radio boxes and display problems

Using InDesign CS6 to create radio buttons in my document, so that it shows a "tick" instead of a "circle" on Windows 7 OS, then exporting the document as an Interactive PDF to Acrobat Pro X.
Once the PDF is created, on my machine the radio boxes display correctly as square boxes, empty by default, you select one box, and a "tick" appears.
However, on the other Windows 7, Windows XP and Mac OSX (10.6.8) machines, the radio boxes display as circular selection boxes, empty by default, and when selected, it shows a "circle".
The "ticks" in the Indesign file are pathed objects, and not fonts being embedded, so that should not be a problem.
All the preference settings on all the machines are the same default settings as first installed.
The problem occurs in Acrobat Pro 9, X and Acrobat Reader X.
If you could help, it would be greatly appreciated.
Kind regards
Dave Wright
Saxon Graphics Ltd, Derby

Just to add that when the page is printed (from any of the machines we have tested), it prints the "ticks".

Leonvo yoga 8 Tab- Filckering and Display problem

Guys
does any one facing Display and Flickering in Lenovo yoga tab b6000 series...
i am getting blank display sometimes. do let me know.. it has been in service center for past 10 days no reply..

I am having the same problem in my A1000G tab.
You can say thank you by pressing the star left to my post IF I HELPED YOU

Simulation creation and display problem

Hi All,
I had problems while creating a project in Simulation that is by CJV1
1) that every WBS created get only First level Hierarchy. No second or third level WBSE get created.
2) No Network or activity get created. Following error is coming
You have not selected an activity or a(n) WBS Element
Message no. CJ479
Even though proper WBSE is selected where I want a activity or network.
3) Another thing is I want Structre dispaly at simulations CJV1, 2 or 3 etc or switch over of structure display and project planning board graghical display. At present there is PPB view. I have checked possible ways to do this but failed
Your inputes in this regards are appreciated in advance.
Regards,
Rahul.

Hi Rahul,
Check whether Sumulation profile is maintained or not in your project. Check whether version key is Deactivated in OPUS ?
regards.
Hari
Edited by: Hari Krishna Kudaravalli on Aug 25, 2009 3:20 PM

Password and Display problem

I am having 2 major problems with my macbookpro -
1. it no longer recognizes my password when it is prompted for - example when i try to install a new software or driver. My lgin password has not changed and does work, but this password, which is the same, does not.
2. Too often when i turn on my computer the screen in fully dark. after a while i realized this can be overcome by adjusting the brightness using the shortcut keys F4. Otherwise there is no way of seeing anything on the display (actually...except for by holding a bright light in a specific angle next to the screen...)
any help would be greatly appreciated
Sazzy

You can check if there are entries in the password manager with an empty user name.<br />
Remove saved Password(s):
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You can also check the exceptions.
* Tools > Options > Security: Passwords: Exceptions
You can remove all stored data from a specific domain via "Forget About This Site" in the right-click context menu of an history entry (Show All History or History sidebar) or via the about:permissions page.
Using "Forget About This Site" will remove everything like bookmarks, cookies, passwords, cache, history, and exceptions from that domain, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.<br />
You can't recover from that "forget" unless you have a backup of the affected files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Dimmer and display problems

Meant to post my question here:
Lately my ibook dimmer has been going spastic. That's the best way i can describe it. I'll have it on the highest setting and it's fine, then i'll move the ibook like one inch and the dimmer goes spastic, goes to the lowest setting and the screen goes black. Also the display goes crazy - i'll have a Safari window open and all of a sudden the window will move up and down or change the page, sometimes at the same time as the dimmer going crazy.
Does anyone know what could be wrong and how I should fix it?
Thanks.

Have you tried running the Apple Hardware Test? It may not show anything, but if you do get an error code, it could point the way to where the problem is.
Good luck!

Nokia Lumia 800 - Screen and display problems

I'm having problems with the display on my phone, it has coloured lines going horizontally through it, such as those in the following photograph:
http://modmyi.com/attachments/forums/general-iphone-chat/39931d1209070920-phone-screen-dead-pixel-ex...
And the screen itself is coming away from the actual body of the phone, it looks as if it is about to fall off from the top.
I've only had this phone for about 3 months, so what do you think could be causing this issue, and is it covered by my warranty?
Thank you

It would be pointless speculating on the cause of this. Best thing for you to do at this stage is to present it to your local Nokia Care Point and see if they see it as a manufacturing defect or misuse. Manufacturing defects should be covered under warranty.
You can locate your nearest care point using the link below
www.nokia.com/support

10.8.1 update and display problems

Hey, I've just updated to 10.8.1 and I'm experiencing strange display glitches... For example, when switching desktop, it doesn't slide smoothly, but with small jumps. Also, when launching Launch Pad, transition isn't smooth and on it's end, the desktop windows "flashes" through it. Anybody experienced the same?

You can try this:
Auto-hide the Dock (System preferences>Dock)
Change the Dock-folders to display as folders, not stacks.

Final Cut Pro - Freeze and Display Problem

When I try to render something in Final Cut, it renders for a few minutes but then the system freezes. I can still vaguely make out a dock and menu bar and final cut windows, but it's all pixelated and distorted. There are some black I can still move the mouse around (which is also distorted) but nothing happens when i click stuff. Has anyone else experienced this? Could this be a problem with my graphics card? (I bought my iMac new November 2007)
I've got FCS 2 and have installed all of the updates.

Is this a new, recent problem?
Or has this been the case since you installed it on your iMac?

Standby/Sleep System and Display Problems

Similar Messages

Maybe you are looking for