Standby switch over problem

Hi,
after giving statements on primary DB
alter system set aq_tm_processes=0;
alter system set job_queue_processes=0;
the primary DB switch_over status not turn to to-standby.

Why do you expect the switch over status to change after these two ALTER SYSTEM commands ?
Are you following some (Incomplete) Instructions / Note / Document ?
What is it that you are trying to do ?
What are the steps in the instructions that you are referring to ?

Similar Messages

  • Standby switch over

    Hi,
    I have set up a data guard configuration with one primary database and one physical standby.
    log apply services and log transfer services work correctly.but when i want to do as switchover operation,
    the output of the following query is always ((session active))
    select switchover_status from v$database.
    i have only one session (/ as sysdba) on primary and one in standby.
    where is the problem?
    thanks.

    Why do you expect the switch over status to change after these two ALTER SYSTEM commands ?
    Are you following some (Incomplete) Instructions / Note / Document ?
    What is it that you are trying to do ?
    What are the steps in the instructions that you are referring to ?

  • Physical/Logical Switch Over

    Hi Champions,
    I just want to know what is the diffrence in logical and physical standby switch Over.
    DGMGRL's process how internal process works.
    any suggesion is appriciated.
    Regards,
    Shitesh Shukla

    Here you go....
    http://ayyudba.blogspot.com/2007/10/performing-switchover-in-data-guard.html
    Hope this helps,
    Regards
    Duplicate RAC Database using RMAN
    http://www.oracleracexpert.com/2009/12/duplicate-rac-database-using-rman.html
    Send EMAIL using UTL_MAIL in Oracle
    http://www.oracleracexpert.com/2009/11/send-email-using-utlmail-in-oracle-10g.html

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Switch over in an environment with multiple standby

    i currently have one primary and one physical standby, I am due to create standby no2 on a different server and then use the new standby as primary ( migrate current primary to a new system) .
    I like to know
    1. if i can create new standby using backup copy of current standby? how about creating it over network? Is it possible? ( I want to avoid load on production)
    2. what happens after I switch over to new standby ? will my current standby become invalid? what are the options and best practices?
    thanks in advance

    emre baransel wrote:
    Hi,
    Yes you can create a second standby with your standby database RMAN backups, also you can copy database files with ftp.
    If you setup log_archive_dest_x parameters properly, after switchover, new primary will continue to ship archivelogs to second standby.
    You should set something like this on the standby:
    LOG_ARCHIVE_DEST_2 = SERVICE=XXX LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=XXX
    Regardsthanks for the reply, how would the other standby know that primary has changed and it should recieve its data from a diffrent primary ?
    am I correct syaing standby tries any of the db names specified in LOG_ARCHIVE_CONFIG and accepts logs from whichever is primary at the time ?
    also i am not using rman catalog , can i still use backup of standby to create a new standby ?
    thanks

  • Standby DB switch over error

    Hi,
    while switching primary to standby,switchover_status on primary is to standby,
    then I given ALTER DATABASE COMMIT TO SWITCHOVER TO STANDBY WITH SESSION SHUTDOWN;
    command and getting below error
    ERROR at line 1:
    ORA-16014: log 1 sequence# 62 not archived, no available destinations
    ORA-00312: online log 1 thread 1: 'D:\ORACLE\ORADATA\PDONDS\REDO01.LOG'
    ORA-00312: online log 1 thread 1: 'C:\ORACLE\REDOLOGGROUP1\REDOB1.LOG'

    Hi,
    after switch over roles of databases,on both ( newstandby and newprimary) DBs relogs are like below,
    SQL> select * from v$logfile;
    GROUP# STATUS TYPE MEMBER
    1 ONLINE D:\ORACLE\ORADATA\PDONDS\REDO01.LOG
    2 ONLINE D:\ORACLE\ORADATA\PDONDS\REDO02.LOG
    3 STANDBY D:\ORACLE\ORADATA\STANDBYREDOLOGS\STDREDOA1.RDO
    1 ONLINE C:\ORACLE\REDOLOGGROUP1\REDOB1.LOG
    2 ONLINE C:\ORACLE\REDOLOGGROUP2\REDOB2.LOG
    4 STANDBY D:\ORACLE\ORADATA\STANDBYREDOLOGS\STDREDOA2.RDO
    5 STANDBY D:\ORACLE\ORADATA\STANDBYREDOLOGS\STDREDOA3.RDO
    3 STANDBY C:\ORACLE\STANDBYREDOLOGS\STDREDOB1.RDO
    4 STANDBY C:\ORACLE\STANDBYREDOLOGS\STDREDOB2.RDO
    5 STANDBY C:\ORACLE\STANDBYREDOLOGS\STDREDOB3.RDO
    10 rows selected.
    in the status column it is displying blank space
    please let me know why it is showing blak space ?

  • We use Adobe Creative Suite 4 Master Collection.  Are there problems if we switch over to Windows 8?

    We use Adobe Creative Suite 4 Master Collection.  Are there problems if we switch over to Windows 8?

    CS 4 is not supported under Windows 8. There are bound to be problems with several programs. You will have more problems with 64-bit Windows 8 than the 32-bit version. I know for certain that you will have issues with Acrobat.

  • Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad calendars. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    On the iMac open System Prerferences > iCloud
    Deselect the box next to Calendars then reselect then restart the iMac.
    On the iPad, tap Settings > iCloud
    Switch Calendars off then back on then reset the iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    Hopefully the event synced over all the devices.

  • Why is switching over multiple tabs in Firefox so slow? how solve this problem please

    My problem is just the slow switching over multiple tabs in Firefox. Each time I go to another tab it takes a while (sluggish), or you can say the ‘click’ on the tab takes time to happen. The rest Firefox is working perfect in speed.
    Don’t know how to solve it, followed all the steps on the MakeUseOf Firefox Speed Up Guide, still having same problem.
    please help me

    Hi tahas,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-slow-or-takes-too-long-start performance troubleshooting section]? There is a lot of good information in there that should help.
    Hopefully this helps!

  • Problem in TMS config after switch over to DR site

    Hi All,
    We resently switch over our primary to DR. I am not able to do the transportations. I have made changes to all neccessary RFC connections and tested, working fine. If i click on Distribute and activate button it is not getting activate. Can some body please help to resolve this issue without deleting the existing config. I have some unneccesary clients in the TMS config, we have deleted those clients but still they are showing in transport routes view. may be because of this The distribute and activate button is not working.. Can some one help please ASAP. this  is our production issue..
    Thanks advance,
    Dev.

    Hi Dev,
    Here in this case no need to delete entire TMS configuration for all systems.
    If your landscape is 3 system, then just delete your existing PRO system from Development(whatever your Domain controller) and come to DR login with ddic in 000 clinet and add the same system in existing domain controller.
    There is no need to delete entire configuration of STMS. just you need to add new system to existing landscape.
    Regards
    Nick Loy

  • Post switch over in oracle dataguard 11g

    Dear Guru,
    Switch over has been completed successfully from primary database to standby database.
    new primaray database is open and accessible but its showing his satus in v$database as below.
    database_role = primary
    switchover_status = not allowed
    db_unique_name = dg1_stdby
    old primaray database which is now standby showing his satus in v$database as below.
    database_role = physical standby
    switchover_status = session active
    db_unique_name = dg1_primy
    when check status in data guard broker its
    for both the databases - dg1_primy and dg1_stdby its showing error ORA-16810: multiple errors or warnings detected for the database.
    when checked dataguard log file on new primary server its showing
    ORA-16816: incorrect database role
    ORA-16700: the standby database has diverged from the primary database
    Please guide me how to resolved issue.
    Thanks & Regards,
    Nikunj Thaker

    Hi Nikunj,
    You can find the scenario, in the "Problem : Data Guard Broker Switchover fails With ORA-16665 using Active Data Guard", on metalink.oracle.com
    First of all manually complete the Switchover, ie. restart the Databases in its new Role. Note that the final Role Change has not been recognized by the Broker, so you have to rebuild the Data Guard Broker Configuration when the Databases have been restarted:
    DGMGRL> remove configuration;
    DGMGRL> create configuration ...
    DGMGRL> add database ...
    DGMGRL> enable configuration;
    Best regards,
    Orkun Gedik

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • External and internal mikes are not automatically switching over either recording or on voice calls

    My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
    Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
    1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
       Using the sound recorder if I start recording the sound with external  mike  and in-between  recording if I  switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound  up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
       But if I start the recording with inbuilt mike and in between recording  if I plug in  the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
       So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
    2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
    To resolve the issue I have tried following steps with no luck:
    1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
    2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
    3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
    3. I have updated the BIOS(Insyde F.65, 12/02/2010).
    4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

    Sounds like you need to upgrade to the iPhone 5s
    The 5s has Touch ID
    You can unlock your phone with your finger instead of typing in a key code
    No swiping to unlock either, just touch the home button
    You can enrol multiple fingers as well
    Here is a video of it in action
    http://www.apple.com/iphone-5s/videos/#video-touch
    Or wait and see what iPhone 6 has to offer
    That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
    And when you lower the phone turn it back on again
    Not sure about the phone locking when your on a call doesn't sound right

  • Big installati​on and switching IP problems with FIOS

         Okay, here's my problems. A little background first. We ordered the FIOS bundle for our computer and also for our son's computer. He will use the router and go wireless. We had Verizon DSL with AOL, he had MSN dial-up. The tech installer arrives yesterday. Does everything he's supposed to--I guess. But, when he's almost finished, he mentions we need an ethernet adapter for my computer and my son needs a wireless adapter to pick up the signal. My son runs to Best Buy and purchases both. It cost $97 for both. First, I THOUGHT this was all supposed to be included! Why did I have to spend an additional $97 on these items? Shouldn't they have been included? As my son arrived back from Best Buy, the tech guy was in the process of leaving. He told us WE were supposed to install the ethernet adapter and the wireless adapter ourselves--AND HE LEFT!!! Luckily my son is somewhat computer savvy and did it. We now have FIOS internet thanks to our son! However, the tech guy did absolutely nothing with my son's computer.
         Second, we sit down to check out our new FIOS cable. One problem, the channels weren't even comparable to our old Comcast cable HD channels. Not even close. The HD channels had a line running through them and weren't even in HD! We called tech services. The same tech guy comes back, hands us 4 bundles of cables, tells us to take out the coax cable and instead use the new A/V--Red, Blue and Green cables, AND LEAVES.....AGAIN!. WE, more precisely, our son, had to install them on both T.V.'s because tech guy had another home to do and didn't have the time. My son did it.....we now have FIOS cable--in HD, thanks to our son!
         Third, I would like to drop my AOL and my son would like to drop his MSN and we would both like to use Verizon for our homepage and receive email through them now. We've read the FIOS internet and TV user guide and WE STILL cannot figure out how to switch over. I did manage to get my Verizon.net email and have used TrueSwitch, But we're afraid of cancelling our AOL and our son is afraid of cancelling his MSN for fear we won't be able to log on to a homepage. There's no icon on our desktops for Verizon's homepage. Tech service has been no help. My son has no clue how he can change from his MSN homepage from to Verizon Central because there is no mention on how to do that in the book or on any of the help pages. He has no clue how to change his account (email, homepage etc), from MSN to Verizon. The book is unclear and hard to follow. The help sites are the same. Links don't work, downloads won't download. I have a college degree and can't even follow these directions! It makes me want to cancel the whole thing and go back to regular cable. There's not even a button to log off the FIOS internet on my computer or on my son's computer. I think FIOS has been running for 2 days--even when the computers are shut off. Is it supposed to do that?

    . My son runs to Best Buy and purchases both. It cost $97 for both. First, I THOUGHT this was all supposed to be included! Why did I have to spend an additional $97 on these items? Shouldn't they have been included? As my son arrived back from Best Buy, the tech guy was in the process of leaving. He told us WE were supposed to install the ethernet adapter and the wireless adapter ourselves--AND HE LEFT!!! 
    Verizon has no way of knowing what your PC has prior to showing up... It is assumed that your PC's are already up to snuff as probably 99% of PC's now-a-days have a Ethernet card built in...  Since your Pc's did not have the hardware neccesary to use the sevice, you are responsible for your PC's... The field tech is not responsible for installing third party equipment of any kind
         Second, we sit down to check out our new FIOS cable. One problem, the channels weren't even comparable to our old Comcast cable HD channels. Not even close. The HD channels had a line running through them and weren't even in HD! We called tech services. The same tech guy comes back, hands us 4 bundles of cables, tells us to take out the coax cable and instead use the new A/V--Red, Blue and Green cables, AND LEAVES.....AGAIN!. WE, more precisely, our son, had to install them on both T.V.'s because tech guy had another home to do and didn't have the time. My son did it.....we now have FIOS cable--in HD, thanks to our son!
    That was wrong, the Field tech shoudl have setup your HD box with your HDTV witht he proper HD cords, the first time... and certainly should have done so the second time
         Third, I would like to drop my AOL and my son would like to drop his MSN and we would both like to use Verizon for our homepage and receive email through them now. 
        Feel free to cnacel the other guys... Verizon is your Internet Service Provider.... The Internet is already being provided.... AOL and MSN are mearly Content providers...  To set you home page inside internet explorer, click on Tool and then itnernet options... you will see the section for homepage... type in www.verizon.net or whatever you want it to be
    Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

  • My phone is not switching from 4G over to WiFi. The phone has the network memorized its just not check marking the network and to switch over to WiFi. How can I fix this?

    I have the iPhone 4S and the wifi was working on it earlier yesterday. I noticed that the wifi didn't kick on last night. It has the network memorized so it could connect automatically. The network name pops up and there's a signal but the spinning circle thing is there and it won't put a check mark by the network name. The wifi will pop up every now and then but only stay for a minute or less. Everyone else's phone and computer is connecting just fine but mine isn't. It won't switch over to WiFi from 4G. I've tried turning off the wifi on my phone. I've tried to forget the network and put in the password numerous of times and I tried to fix it by turning my phone on and off and that still didn't work. I'm hoping that this is a temporary thing but I don't know. What's a good way to fix this because seriously I would like to not use up all of my data for this kind of bull crap. So what's a good way to fix this?

    I got the ATV hooked up to the WiFi after manually inputting the DHCP settings.
    The ATV will not see iTunes from a PC on the same iTune network.  I guess you need an Apple computer for iTunes to connect to the ATV.
    The biggest problem is that the iTunes store on the ATV is nonexistent I imagine because of competition/ monopolies in the UAE.  If I was in Lao, Burma, Thailand, Mozambique no problem.  40 Countries are listed and non of them are from the Middle East.  When I logon to the iTunes store on my PC it too does not allow for me to buy any movies or TV shows.  I am not sure why. 
    As for the iPad OS6, iTunes has an icon and when you click it you get iTune U or Podcast, no video content.  The App store works fine and they are always happy to take your money but no video content. 
    To top it all off YouTube is no longer licensed under OS6.0 and although I can get it on Google Chrome it is by no means as quick (for reasons unknown).
    As I said before if I choose United States as my country the ATV hooks up and lets me browse TV and movies and watch trailers but not able to purchase (obviously).
    So my conclusion is that ATV will not hook up to the iTune store in the UAE?  If this is incorrect please clue me in.

Maybe you are looking for