Standrad Function Module Missing

Hi,
When i try to post Goods receipt in MIGO It is throwing a dump saying " Function Module ANLBZW_CREATE_TRANSFER Not found ".
Can any body help me regarding this

hi,
I guess you are working on a 4.7 or ECC 5 systems.
The funciton module you have mentioned you can find it in ECC 6 system but with
NOT RELEASED status.
This means that this function module hasn't yet been given released status by SAP.
If you have ECC6 system, GOTO SE11--> RODIR --> check for this function module.
You get a message that no entries exist. This means that it is not yet a released object hence not preferred to use.
For your requirement try out with MIGO_DIALOG.
Thanks
Sharath

Similar Messages

In WE19 getting error Message as Function module missing

Hi Friends,
I need to debug the Inbound function module
so in WE19 i am providing the IDOC number and clicking on the Inbound function module then i am getting pop-up
i am able to select my function module name
and checking the Fore ground processing Radio button
for debugging
I am getting a Warring Message as
Interface or Function module <NAME> is Incorrect
Kindly suggest me
where the mistake might be
and how to correct IT
Thanks in Advance
Ganesh

Hi Ganesh,
I believe you are using a non IDOC function module, that's the reason you are getting that error.
Use the appropriate IDOC function module and then select the Debug check box and it will stop.
If you can provide me the IDOC message then I can help you by giving the correct Function Module.
Thanks,
Mahesh.

BUPA_MAIN stays in Intermediate state Function Module missing

We noticed that on our Productive system, since yesterday most
of the BUPA_MAIN BDOCs status are in yellow "After qRFC step (intermediate
state)" since last two days on PRM. Before it was working fine.
We got o SMW01 & re-process it, then we get a short dump which says:
" Function module "/1CRMGC/CGBUPA_MAIN_RRR" not found."
We compared in th eTxn: SBDM the BUPA_MAIN on Production & Test systems.
We found that the Module "/1CRMGC/CGBUPA_MAIN_RRR" is not there in Production but it
is there on other systems where its working.
Please let us know how we can generate this,
Is it the normal process to Generate on the dsired system in our case production directly? or do we do it in Development & then Transport it.
We have this bug in Production and fix this asap.
Thanks
Regards
Rahul
Edited by: Rahul Kumar Lal on Sep 2, 2010 1:50 PM

Hi Rahul,
Goto Trxn. GNRWB -
Generator Group : REPLI
Industry : Consumer Goods
Select BUPA_MAIN on L.H.S. and all Generators on the R.H.S.
Click on Generate/Check icons.
or you can goto trxn . SMOGGEN and select BUPA_MAIN.
Tnx,
Rohit

Difference between a programe&function module in R/3 & BW

Hi Gurus
i would like to know differenece between programe and function module in R/3
and BW, so can some one give me a brief idea about it cheers thanks .....

Hi,
Function modules are ABAP routines that are administered in a central function library. They apply across applications and are available throughout the system. You must assign function modules to a function pool that is called a function group. A function group is nothing but a container for the function modules. Now create a function group and then a function module.
it is a kind of standrad program where u can use it in differnt local programes .
take an example standrad function module "REUSE_ALV_CHECKBOX_SET" suppose u want to create a checkbox in output screen u dont need to write a program for that u can use above mentioned function module in ur programe.
hope this information helps u
Regards,
Gurudatt Bellary

Missing Function Modules - EWA_MAIN_BUSINESS_HOURS & READ_STAMP

Hi Gurus,
When i am generating EWA for system in Solution Manager, i am getting the error
under Service Preparation
- Missing Function Modules
1. EWA_MAIN_BUSINESS_HOURS
2. READ_STAMP
*In the satellite system,tcode-sdccn*
Below are the errors:
1) EWA_MAIN_BUSINESS_HOURS : no matching interface found
function module not found
EWA_MAIN_BUSINESS_HOURS : funcname /SDF/MAIN_BUSINESS_HOURS , module 000156
2) READ_RFC_LIST : # of imp params in funcmod < # of imp params in mod 000152
READ_RFC_LIST : inconsistency in # of imp params found for mod 000152
READ_RFC_LIST : non-default imp param IF_ANONYMIZE is not passed to mod 000152
READ_STAMP : no matching interface found
function module not found
READ_STAMP : funcname /BDL/READ_STAMP , module 000153
Can Anybody help me to resolve this issue.
Regards,
Ashok

The modules EWA_MAIN_BUSINESS_HOURS, READ_STAMP and READ_RFC_LIST are supplied with the next version of ST-PI, which is currently scheduled to be released for customers on December 15. I can only ask you to ignore the error until after the next version of ST-PI has been installed on the system.
Please be informed that the errors are not critical and will disappear
by installing the latest ST-PI which will be release around december the
15th 2008.
Edited by: Felipe Pitta on Dec 2, 2008 12:22 PM

ME_JSP_SMOMO_CHECK_AUTHORITY function module is missing

Hi
I am setting up a MI system with Web AS 6.40 sp 13 as middelware. As backend system I have an IDES client 4.6C sp 50, and PI 2004_1_46C: patch 0008.
My problem is that I can't log in on the Mobile Web Console, I get the error: Access denied. No authorization.
When I check in my backend I find a short dump that tells me that ME_JSP_SMOMO_CHECK_AUTHORITY function module is missing.
I belive this is the problem? How can I solve this?
Any good ideas?
Best Regards,
Morten

Morten,
Make sure your user account has the authorization to use the WebConsole. Check P17-18 of the MI 2.5 SP13 Installation Guide. It has a list of authorization objects for the users to user certain functions.
Use S_TCODE authorization object for WebConsole usage.
Hope that helps.
Peter

Function module "/IXOS/DCEP_RMAPI_READ" is missing

Hi,
We are trying to setup doculink for SAP to integrate with doculink for opentext ECM. During the configuration we are getting error for missing function module "/IXOS/DCEP_RMAPI_READ" for function group "/IXOS/DCEP_RMAPI".
Tried to search the function module "/IXOS/DCEP_RMAPI_READ" in sap, but no data exists.
Please help us to rectify the issue.
Regards
Nikhilesh Ray
+91-9819069840

Dear Ray,
regarding the name of the mentioned function module I would recommend you to get in touch with your IXOS archive vendor company. I think they should be aware of how to create this function modules in your system.
Best regards,
Christoph

Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

Hi all,
when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT" when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
FYI...it is showing the below popup screen ..
Thanks,
Koushik

hi Feiyun,
below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
DATA: ls_control         TYPE zsfi_fiupload_control,
         ls_header          TYPE zsfi_fiupload_header_v13,
         ls_item            TYPE zsfi_fiupload_item_v13,
         ls_trailer         TYPE zsfi_fiupload_control,
         l_line_count       LIKE zsfi_fiupload_control-rec_count,
         l_current_curr     TYPE kcde_cells-value,
         l_current_postdate TYPE kcde_cells-value,
         l_current_compcode TYPE kcde_cells-value,
         l_currentrow       TYPE kcde_cells-row,
         l_filename         LIKE rlgrap-filename.
   DATA: BEGIN OF lt_intern OCCURS 0.
           INCLUDE STRUCTURE kcde_cells.
   DATA: END OF lt_intern.
   DATA: BEGIN OF lt_items OCCURS 0,
           a TYPE kcde_cells-value,
           b TYPE kcde_cells-value,
           c TYPE kcde_cells-value,
           d TYPE kcde_cells-value,
           e TYPE kcde_cells-value,
           f TYPE kcde_cells-value,
           g TYPE kcde_cells-value,
           h TYPE kcde_cells-value,
           i TYPE kcde_cells-value,
           j TYPE kcde_cells-value,
           k TYPE kcde_cells-value,
           l TYPE kcde_cells-value,
           m TYPE kcde_cells-value,
           n TYPE kcde_cells-value,
           o TYPE kcde_cells-value,
           p TYPE kcde_cells-value,
           q TYPE kcde_cells-value,
           r TYPE kcde_cells-value,
           s TYPE kcde_cells-value,
           t TYPE kcde_cells-value,
           u TYPE kcde_cells-value,
           v TYPE kcde_cells-value,
           w TYPE kcde_cells-value,
           x TYPE kcde_cells-value,
           y TYPE kcde_cells-value,
           z TYPE kcde_cells-value,
           aa TYPE kcde_cells-value,
           ab TYPE kcde_cells-value,
           ac TYPE kcde_cells-value,
           ad TYPE kcde_cells-value,
           ae TYPE kcde_cells-value,
           af TYPE kcde_cells-value,
           ag TYPE kcde_cells-value,
           ah TYPE kcde_cells-value,
           ai TYPE kcde_cells-value,
           AJ TYPE KCDE_CELLS-VALUE,
           AK TYPE KCDE_CELLS-VALUE,
           END OF lt_items.
   l_filename = p_flpath.
* the file must be an xls file, not xlsx or comma seperated
   IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
     MESSAGE i261(zfi).
     g_error = 'X'.
     EXIT.
   ENDIF.
* upload excel file to a generic table
   CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
     EXPORTING
       filename                = l_filename
       i_begin_col             = 1
       i_begin_row             = 1
       i_end_col               = 150
       i_end_row               = 65000
     TABLES
       intern                  = lt_intern
     EXCEPTIONS
       inconsistent_parameters = 1
       upload_ole              = 2
       OTHERS                  = 3.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
* validate that the format is in the restatement format
* this is the only template to have the ledger group in cell G-2
** READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
** IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
**    MESSAGE i260(zfi).
**    g_error = 'X'.
**    EXIT.
** ENDIF.
* create control record values
   ls_control-rec_type = 'C'.
   ls_control-global_id = 'GLU-03000'.
   ls_control-local_id = ''.
   ls_control-rec_count = ''.
   CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
   ls_control-version = '12'.
   ls_control-email = ''.
   ls_control-eor = 'X'.
   ls_trailer = ls_control.
* open output file and add the control record
   OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
   TRANSFER ls_control TO p_unixfilename.
* create header record values, will be transfered to file in the item loop
   ls_header-rec_type = 'H'.
   READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
   IF sy-subrc = 0.
     ls_header-header_txt = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH key row = '0020' col = '0002'.
   IF sy-subrc = 0.
     ls_header-comp_code = lt_intern-value.
   ENDIF.
************doc date
   READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
   IF sy-subrc = 0.
     ls_header-pstng_date = lt_intern-value.
   ENDIF.
************posting date
     ls_header-doc_date = sy-datum.
   READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
   IF sy-subrc = 0.
     ls_header-doc_type = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
   IF sy-subrc = 0.
     ls_header-ref_doc_no = lt_intern-value.
   ENDIF.
************currency moved to line items
     READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
   IF sy-subrc = 0.
   ls_header-currency = lt_intern-value.
   ENDIF.
   ls_header-trans_date = ''.
   READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
   IF sy-subrc = 0.
     ls_header-period = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
   IF sy-subrc = 0.
     ls_header-reason_rev = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
   IF sy-subrc = 0.
     ls_header-rev_date = lt_intern-value.
   ENDIF.
* READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
* IF sy-subrc = 0.
     ls_header-ledger_grp = ''.
* ENDIF.
* READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
* IF sy-subrc = 0.
     ls_header-exch_rate = ''.
* ENDIF.
   READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
   IF sy-subrc = 0.
     ls_header-calc_tax = lt_intern-value.
   ENDIF.
   ls_header-eor = 'X'.
* loop at the line items and append them to a table with multiple columns
   LOOP AT lt_intern WHERE row GE 20.
     IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
       APPEND lt_items.
       CLEAR lt_items.
     ENDIF.
     l_currentrow = lt_intern-row.
     CASE lt_intern-col.
       WHEN '0001'. lt_items-a = lt_intern-value.
       WHEN '0002'. lt_items-b = lt_intern-value.
       WHEN '0003'. lt_items-c = lt_intern-value.
       WHEN '0004'. lt_items-d = lt_intern-value.
       WHEN '0005'. lt_items-e = lt_intern-value.
       WHEN '0006'. lt_items-f = lt_intern-value.
       WHEN '0007'. lt_items-g = lt_intern-value.
       WHEN '0008'. lt_items-h = lt_intern-value.
       WHEN '0009'. lt_items-i = lt_intern-value.
       WHEN '0010'. lt_items-j = lt_intern-value.
       WHEN '0011'. lt_items-k = lt_intern-value.
       WHEN '0012'. lt_items-l = lt_intern-value.
       WHEN '0013'. lt_items-m = lt_intern-value.
       WHEN '0014'. lt_items-n = lt_intern-value.
       WHEN '0015'. lt_items-o = lt_intern-value.
       WHEN '0016'. lt_items-p = lt_intern-value.
       WHEN '0017'. lt_items-q = lt_intern-value.
       WHEN '0018'. lt_items-r = lt_intern-value.
       WHEN '0019'. lt_items-s = lt_intern-value.
       WHEN '0020'. lt_items-t = lt_intern-value.
       WHEN '0021'. lt_items-u = lt_intern-value.
       WHEN '0022'. lt_items-v = lt_intern-value.
       WHEN '0023'. lt_items-w = lt_intern-value.
       WHEN '0024'. lt_items-x = lt_intern-value.
       WHEN '0025'. lt_items-y = lt_intern-value.
       WHEN '0026'. lt_items-z = lt_intern-value.
       WHEN '0027'. lt_items-aa = lt_intern-value.
       WHEN '0028'. lt_items-ab = lt_intern-value.
       WHEN '0029'. lt_items-ac = lt_intern-value.
       WHEN '0030'. lt_items-ad = lt_intern-value.
       WHEN '0031'. lt_items-ae = lt_intern-value.
       WHEN '0032'. lt_items-af = lt_intern-value.
       WHEN '0033'. lt_items-ag = lt_intern-value.
       WHEN '0034'. lt_items-ah = lt_intern-value.
       WHEN '0035'. lt_items-ai = lt_intern-value.
       when '0036'. lt_items-aj = lt_intern-value.
       when '0037'. lt_items-ak = lt_intern-value.
     ENDCASE.
   ENDLOOP.
   APPEND lt_items.
* sort rows by the post date, comp code, curr.
* SORT lt_items BY ah a ai.
* loop at the items, creating a header record if the comp code, curr. or post date changes
   LOOP AT lt_items.
     ls_item-rec_type = 'I'.
     ls_item-post_key = lt_items-c.   "lt_items-b.
     IF lt_items-c GE '20' AND lt_items-c LE '39'.
       ls_item-vendor_no = lt_items-d.
     ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
       ls_item-customer = lt_items-d.
     ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
       ls_item-asset = lt_items-d.
     ELSE.
       ls_item-gl_account = lt_items-d.
     ENDIF.
     ls_item-asset_type = lt_items-m. "lt_items-l.
     ls_item-trans_type = lt_items-n. "lt_items-m.
     ls_item-print_flag = ''.
     ls_item-item_text = lt_items-j. "lt_items-i.
     ls_item-comp_code = lt_items-b. "lt_items-a.
     ls_item-bus_area = ''.
     ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
     ls_item-tax_code = lt_items-q. "lt_items-p.
     ls_item-taxjurcode = lt_items-r. "lt_items-q.
     ls_item-profit_ctr = lt_items-g. "lt_items-f.
     ls_item-costcenter = lt_items-h. "lt_items-g.
     ls_item-orderid = lt_items-ac. "lt_items-ab.
     ls_item-wbs = lt_items-i. "lt_items-h.
     ls_item-trade_id = lt_items-o. "lt_items-n.
     ls_item-part_prctr = lt_items-p. "lt_items-o.
     ls_item-material = lt_items-t. "lt_items-s.
     ls_item-salesorg = lt_items-aa. "lt_items-z.
     ls_item-distr_chan = lt_items-ab. "lt_items-aa.
     ls_item-pmnttrms = ''.
     ls_item-pmtmthd = ''.
     ls_item-pmtmthsupl = ''.
     ls_item-alt_payee = ''.
     REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
     REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
     ls_item-amt_doccur = lt_items-e. "lt_items-d
     REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
     REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
     ls_item-loc_amt = lt_items-f. "lt_items-e
     ls_item-loc = lt_items-k. "lt_items-j.
     ls_item-sas_revtype = lt_items-s. "lt_items-r.
     ls_item-rev_type = lt_items-u. "lt_items-t.
     ls_item-rev_chnl = lt_items-v. "lt_items-u.
     ls_item-bill_to = lt_items-x. "lt_items-w.
     ls_item-payer = lt_items-z. "lt_items-y.
     ls_item-ship_to = lt_items-y.
     ls_item-tax_amnt = lt_items-x.
     ls_item-func_area = ''.
     ls_item-expend_date = lt_items-ae. "lt_items-ad.
     ls_item-wtax_code = lt_items-af. "lt_items-ae.
     ls_item-wtax_base = lt_items-ag. "lt_items-af.
     ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
     ls_item-payment_block = ''.
     ls_item-grp_amt = ''.
     ls_item-anc_amt = ''.
     ls_item-permit_payee = ''.
     ls_item-value_date = ''.
     ls_item-pernr   = ''.
     ls_item-legacy1 = ''.
     ls_item-legacy2 = ''.
     ls_item-legacy3 = ''.
     ls_item-legacy4 = ''.
     ls_item-legacy5 = ''.
     ls_item-legacy6 = ''.
     ls_item-legacy7 = ''.
     ls_item-legacy8 = ''.
     ls_item-legacy9 = ''.
     ls_item-legacy10 = ''.
     ls_item-eor = 'X'.
     TRANSLATE lt_items-ai TO UPPER CASE.
     TRANSLATE lt_items-b TO UPPER CASE.
     TRANSLATE lt_items-a TO UPPER CASE.
     TRANSLATE lt_items-aj TO UPPER CASE.
     IF l_current_curr <> lt_items-a "lt_items-ai
       OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
       OR l_current_compcode <> lt_items-b.
       l_current_curr = lt_items-a.
       l_current_postdate = ls_header-pstng_date. "lt_items-aj.
       l_current_compcode = lt_items-b.
       ls_header-comp_code = l_current_compcode.
       ls_header-currency = l_current_curr.
       ls_header-pstng_date = l_current_postdate.
       ls_header-doc_date = l_current_postdate.
       TRANSFER ls_header TO p_unixfilename.
       l_line_count = l_line_count + 1.
     ENDIF.
     TRANSFER ls_item TO p_unixfilename.
     l_line_count = l_line_count + 1.
   ENDLOOP.
   ls_trailer-rec_type = 'T'.
   ls_trailer-rec_count = l_line_count.
   TRANSFER ls_trailer TO p_unixfilename.
   CLOSE DATASET p_unixfilename.
* change the format to fixed format for the remainder of the load program
   p_fixed = 'X'.
   p_rstmnt = ''.
Thanks,
Koushik

BW Upgrade and Missing Function Modules

We just upgraded our BW development system from 3.1 to 3.5 with 353 content and we found out all our customer developed function modules are missing from the upgraded version. Our custom function groups are named "ZBIW" and function modules start with "ZBW*". Would this have caused any problems? Should our modules have started with "Z_" as opposed to "Z".
Any help is greatly appreciated.
Thanks
Shai

Hi Dinesh,
But the back up is taken prior to upgrade. I do not know if we will end up in more problems, trying to restore objects from different versions of BW.
Thanks
Shai

Availbility - Missing Parts - Function Module / Utility

Hello,
I am wondering if we have any standard SAP Functionality i.e a Function Module / Other where we can pass a production order # as an input and the result gives the list of all Missing Parts for that Production Order.
Appreciate any kind of inputs.
Best Regards,
Bharat.

Hi Bharat,
You can use sap std report or table to get list of missing parts, i dont think sap have function module on this requirement
STD Report
CO24 - Missing Parts Info System
Table
RESB - Reservation/dependent requirements
Regards,
Sankaran

Function module to calculate standrad deviation

Hi everybody...
gud morning
please do tell mei the standard function module for calculating standard deviation.

Hi,
You can use the function module
1. 'QRKT_STD_DEVIATION_SHEWHART'-Algorithms for Shewhart chart for s with internal dispersion and mean line
2.'QRKT_STD_DEVIATION_SHEWHART_2'- Algorithms for Shewhart chart for s with overall dispersion and mean line.
You could also calculate it yourself of course - standard deviation is the square root of the sum of the square of the differences between the mean and each value divided by the number of values you have less one.
Hope this helps.
Regards,
Sophia Xavier

Function module RZL_WRITE_FILE_LOCAL is missing?

Hi,
To avoid using OPEN DATASET command, to read and write into Application server I usually use function modules RZL_WRITE_FILE_LOCAL to write to, and RZL_READ_FILE to read from app servre, but unfortunately I could not find RZL_WRITE_FILE_LOCAL in 4.7, does anyone knows whether any new func. module that has similar function with RZL_WRITE_FILE_LOCAL?
thanks in advance.
Yayan Irianto.

Hi Yayan,
that's fine that we could help you
So please say
'Thanks the SDN way'. Click on the yellow star, and award suitable points.
Check out this weblog:
/people/mark.finnern/blog/2004/08/10/spread-the-love
thanks
Andreas

Function Module BAPI_OUTB_DELIVERY_CHANGE missing SDABW

Our company has a business requirement to base shipping method on the weight of the shipment.
In order to achieve this, we group deliveries into a shipment to reach an aggregate weight.
We were using incoterms to determine if we would charge the customer for freight or not -- but we are getting away from this method and we want to use Special Processing Indicator (SDABW) to do this instead.
Our plan is when SDABW = Z003 and the weight threshhold is met, function module BAPI_OUTB_DELIVERY_CHANGE should change the delivery.
Our problem is that the field SDABW is not included in BAPI_OUTB_DELIVERY_CHANGE.
Does anyone know a way to add this to the FM? Or is there another FM that we could use?

Check whether any of the includes FV50C002, LV05IFLV, L0VTRF00, L0VVTF00 could help you. Also take a look at OSS Note 606769 - XSI_GET_SERVICE_CD_SDABW and XSI_GET_SERICE_CD_LPRIO, which talks about couple of function modules.
Thanks,

Drop down values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

Hi all,
I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT" to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
Thanks in advance
** FYI...i am using the below code:
* upload excel file to a generic table
   CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
     EXPORTING
       filename                = l_filename
       i_begin_col             = 1
       i_begin_row             = 1
       i_end_col               = 150
       i_end_row               = 65000
     TABLES
       intern                  = lt_intern
     EXCEPTIONS
       inconsistent_parameters = 1
       upload_ole              = 2
       OTHERS                  = 3.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
Thanks,
Koushik

Hi all,
I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT" to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
Thanks in advance
** FYI...i am using the below code:
* upload excel file to a generic table
   CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
     EXPORTING
       filename                = l_filename
       i_begin_col             = 1
       i_begin_row             = 1
       i_end_col               = 150
       i_end_row               = 65000
     TABLES
       intern                  = lt_intern
     EXCEPTIONS
       inconsistent_parameters = 1
       upload_ole              = 2
       OTHERS                  = 3.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
Thanks,
Koushik

Can not find Function module in Crystal Report Database Connections FN

Hi,
we designed a Function Module XX in SE80.
We set up BO Interagtion for SAP
We can connect to the R3( CRM) System.
We can See FN's.
We can not see our Function Module XX we designed in SE80 in the Database Connection
What is missing ?
Any Authorization missing ?
Which Where
Thanks
Martin Sautter

Yes,
we just have got it:
/Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options -> Table Name Like: <MYTABLE>
than
/Right Mice Button/Regenerate
Thanks
Martin

Standrad Function Module Missing

Similar Messages

Maybe you are looking for