Standrad Report For PP

Plz tell me stnadrad report for work center wise total machine and labour hours and production.

hi
use below Tcodes..
PK11
PK12
PK13
PK18
MCQ.
MCRE
MCRI.
C024.
hope it will help you .
~linganna

Similar Messages

  • Issue regarding Standrad report for IT0057

    Dear All,
    Is there a standard report for infotype 0057(member ship fees)
    Regards
    Nalla

    Hi,
    You can use HARCSI00 report - this report evaluates both membership fees IT 0057 and payroll results.
    or
    You can use PC00_M99_CWTR (wage type reporter) and choose relevant Membership wage type to check the values.
    Regards
    Chandrashekar
    Edited by: CVKHCM on Jul 29, 2010 1:15 PM

  • Standrad reports for material consumption

    Hi ,
    I require input on following scenario.
    The raw material is consumed in  REM backflushing. For each work center a production version is created .
    In MCRO t/c i get the production version /material wise consumption of raw material.
    Three work centers will form a stage . If i want to check the material consumption for each stage , is there any standard report.
    If i define a work center hierarchy , will it help?
    Kindly advise
    Regards
    ShankarR

    Dear
    Try the following :
    1.MCRE: Consumption report and You can chek in MB51/ME2M
    2.Goto SAP Table - MVER consumption table in SE16 t.code.
    Refer all kind of reports here in useful wiki : http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports
    Regards
    JH

  • Need standrad program for vendor aging report

    Hi
      Need standrad program for vendor aging report.
    Please reply me only standrad programs.
    Point are sure.
    Regards,
    kumar

    Hi Pankaj
       sorry to say that this is not my required program.
    I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
    Thanks for your effort.
    points are awarded.
    Regards,
    kumar

  • Report for issuing C-Form to vendor

    Hi,
    Report for issuing C-Form to vendor regarding invoice booked against PO.
    Help me out in the above issue.
    Regards,
    R.K

    Hi Anjireddy,
    can you let me the path or T.code for the standrad C-Form and what is the process we has to follow for C-Form for vendor.
    Regards,
    R.K

  • Report for Qty Contract and Value Contract with PO release exceeding limits

    Hi All,
    Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
    Thanks in advance!

    hi Duke,
    If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
    So, there is no report for the same...
    Hope it helps...
    Regards
    Priyanka.P

  • PS report for Actual and commitment Balance

    Dear experts,
    Is there any report in PS where i can see list of projects has actual balance and commitment balance?
    Note: I want to see only the balance of actual cost ( which is not settled) and commitment balance (Open PO, PR etc..)
    Regard
    Vetrivelan

    Hi,
    For commitment- CJI5
    actual - CJI3 with correct layout as per you requirement.
    also try S_ALR_87013558 report & go to line item report for detail actuals(& you have to change the layout accordingly) & commitment.
    hope this would help you...
    regards,
    SL

  • Simulair report for FBL5N and FBL1N for new general ledger on segment level

    We are working with segments in new G/L ledger. We want to run a open item report where we can combine customers and vendors by segment. The vendors and customers are linked in the master data. In the "old"  reports FBL5N and FBL1N you can do this but not by segment.I found the following report on segment level:
    - S_PCO_36000218 - Receivables: Segment
    - S_PCO_36000219 - Payables: Segment
    What I'm missing is to run 1 report for Customers and vendors. What I'm missing to is that there are only some fields available on line item level. (I like to have invoice number, documentype,.......)
    Is there a standard report for this in new genaral leger?
    Is it possible to ad additional field to th list viewer.

    What is this user license type?  All financial transactions need professional license.
    Thanks,
    Gordon

  • How to create a report for open sales orde documents which are not invoiced

    Hi Experts this is urgent,
    +pls give the Logic for document flow+
    My requirement is create a report for sales orders which are not invoiced  using the following table.
    VBAK : sales order header
    VBAP : sales order item
    VBFA : sales document flow
    VBUK for processing status
    KOMV for duties value and sales order value
    LIKP : delivery not header
    LIPS :delivery note item
    For information : In the header level the processing Status is indicated in the table VBUK field LFSTK for one sales order number. A,B , C are the possible entries.
    Case A : When a sales order is invoiced we can display information on the header status :
    Overall status : Completed  and display a invoice number in the document flow. When the items of the sales orders are invoiced the process status is the following :  Overall status       Completed            
    Delivery status      Fully delivered      
    Case B : An open sales order not delivered and not invoiced will have overall status : Open on the header and item level and will not have subsequent documents.
    Case C :
    When the items for the sales order are delivered but not invoiced the status will be u201Cfully deliveredu201D
    And the subsequent documents will be delivery notes and good issue if the delivery note is issued.
    With regards
    ravi
    Edited by: ravik ravik on Jun 25, 2008 3:29 PM

    Hello Ravi,
    U neednot develop any report..
    there is std report with txn V.02
    or copy this and make necessary changes.
    Reward, if helpful.
    Rgds,
    Raghu.

  • Aging report for Open Invoice

    Hi All,
    I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
    first logic is
    *If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
    second logic
    total number of invoice = current date - document date.
    but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
    Regards,

    hi,
    You can  check few default PO reports wid proper paramater in it
    or
    Can check table EKBE
    or
    Check PO history in the PO doc
    Or
    Check the ME80FN
    Regards
    Priyanka.P

  • Report for material with sloc,qty available, and production order

    hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

    to make sure you know how to do this.
    In the material document list, hit "Ctrl+F8" on your keyboard.
    A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
    Rgds.

  • Report for Comparison of Material Qty

    Hi All,
    I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
    Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
    Thanks & regards,
    Ravi S

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

  • Report for open process orders

    Dear SAP experts,
    As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
    I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
    Is there any way to get the similar report for open process orders?
    Many Thanks,
    Lisa Yao

    Is there any clues?

  • Report for open order and shipped qty  summary

    Dear Folks,
               Can any one please help me.
    Report for open order summary Vs shipped quantity
    what are the related programs to it.
    throw some light on it.

    >
    arpita b wrote:
    > Dear rohit
    >    
    >     Iam asking about any report which compares or give details of open order vs shipped qty.
    >
    > Any sis report is available for this?
    Hi Arpita,
    There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
    If you want, I will send you the list of all T.codes used to generate reports in SD.
    Revert back to me if you need the same.
    Regards,
    Swapna D.

  • Report for stock statement

    hi guy's,
       i am doing report for the stock statement .... my issue is in MB5B if i reverse some document it shows as it move's to issue QTY and my receipt is same but my closing stock is correct ...is there any std report avalible ....
    thank's in advance

    Use this code :
    TABLES : MSEG,MKPF,MARA,MAKT,BEWART,MSLB,BSIM.
    TYPE-POOLS : SLIS.
    DATA : IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
           IT_LIST_HEADER TYPE SLIS_T_LISTHEADER,
           IT_EVENTS TYPE SLIS_T_EVENT,
           GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
           WA_SORT TYPE SLIS_SORTINFO_ALV,
           IT_SORT TYPE SLIS_T_SORTINFO_ALV,
           REPID LIKE SY-REPID,
           FRM_DATE(10),TO_DATE(10),
           DISPTEXT(255),DISPTEXT2(255).
    TYPES : BEGIN OF ST_OPBAL,
             MATNR LIKE MSEG-MATNR,
             MAKTX LIKE MAKT-MAKTX,
             BATCH LIKE MSEG-CHARG,
             BWART LIKE MSEG-BWART,
             MENGE LIKE MSEG-MENGE,
             ZEILE LIKE MSEG-ZEILE,
             WERKS LIKE MSEG-WERKS,
             SOBKZ LIKE MSEG-SOBKZ,
             BUDAT LIKE MKPF-BUDAT,
             SHKZG LIKE MSEG-SHKZG,
             DMBTR LIKE MSEG-DMBTR,
             MBLNR LIKE MSEG-MBLNR,
             LGORT LIKE MSEG-LGORT,
           END OF ST_OPBAL.
    DATA : OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE,
           TMP_OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF BAL_NOREF OCCURS 0,
              MATNR LIKE MARA-MATNR,
              SHKZG LIKE MSEG-SHKZG,
              DMBTR LIKE MSEG-DMBTR,
           END OF BAL_NOREF.
    DATA : BEGIN OF OPBAL2 OCCURS 0,
             SNO(3)      TYPE N,
             MATNR       LIKE MSEG-MATNR,
             MAKTX       LIKE MAKT-MAKTX,
             OP_BAL      LIKE MSEG-MENGE,
             OP_STKVAL   LIKE MSEG-DMBTR,   "NEW
             REC         LIKE MSEG-MENGE,
             T_OPBAL_REC LIKE MSEG-MENGE,
             REC_STKVAL  LIKE MSEG-DMBTR,   "NEW
             ISS         LIKE MSEG-MENGE,
             ISS_STKVAL  LIKE MSEG-DMBTR,   "NEW
             SALES       LIKE MSEG-MENGE,
             T_ISS       LIKE MSEG-MENGE,
             CL_BAL      LIKE MSEG-MENGE,
             BATCH       LIKE MSEG-CHARG,
             SUBCON      LIKE MSEG-MENGE,
             CL_STKVAL   LIKE MSEG-DMBTR,
           END OF OPBAL2.
    DATA  SERNO(4) TYPE C.
    DATA OPTOT  TYPE P DECIMALS 3.
    DATA RECTOT TYPE P DECIMALS 3.
    DATA ISSTOT TYPE P DECIMALS 3.
    DATA TOTALL TYPE P DECIMALS 3.
    DATA FLG        TYPE N.
    DATA FLAG       TYPE N.
    DATA STOCKVAL        TYPE MSEG-DMBTR.
    DATA REC_STOCKVAL    TYPE MSEG-DMBTR.
    DATA ISS_STOCKVAL    TYPE MSEG-DMBTR.
    DATA CL_STKVAL       TYPE MSEG-DMBTR.
    SELECTION-SCREEN BEGIN OF BLOCK X WITH FRAME.
         SELECT-OPTIONS: P_MATNR FOR MSEG-MATNR,
                         P_MGRP  FOR MARA-MATKL,
                         P_DATE FOR MKPF-BUDAT,
         P_PLANT FOR MSEG-WERKS DEFAULT  'NB01' OBLIGATORY NO INTERVALS
                                                    NO-EXTENSION .
         SELECT-OPTIONS: P_STLOC FOR MSEG-LGORT NO INTERVALS NO-EXTENSION.
    SELECTION-SCREEN END OF BLOCK X.
    INITIALIZATION.
       REPID = SY-REPID.
       PERFORM FILL_FLDCAT USING IT_FLDCAT.
       PERFORM FILL_EVENTS USING IT_EVENTS.
       PERFORM FILL_LAYOUT USING GS_LAYOUT.
    START-OF-SELECTION.
      CONCATENATE P_DATE-LOW6(2) '.' P_DATE-LOW4(2) '.' P_DATE-LOW+0(4)
      INTO FRM_DATE.
      CONCATENATE P_DATE-HIGH6(2) '.' P_DATE-HIGH4(2) '.' P_DATE-HIGH+0(4)
      INTO TO_DATE.
      CONCATENATE TEXT-003 FRM_DATE' TO : ' TO_DATE INTO DISPTEXT.
      CONCATENATE TEXT-004 P_PLANT-LOW ' Storage Location : ' P_STLOC-LOW
      INTO DISPTEXT2.
      PERFORM FILL_HEADER USING IT_LIST_HEADER.
      SELECT  A~MATNR
              F~MAKTX
              A~CHARG
              A~BWART
              A~MENGE
              A~ZEILE
              A~WERKS
              A~SOBKZ
              D~BUDAT
              A~SHKZG
              A~DMBTR
              A~MBLNR
              A~LGORT
              INTO TABLE OPBAL
       FROM MKPF AS D JOIN MSEG AS A
               ON DMBLNR = AMBLNR  AND
                  DMJAHR = AMJAHR
            JOIN MARA AS E
               ON EMATNR = AMATNR
            JOIN MAKT AS F
               ON FMATNR = AMATNR
       WHERE   A~MATNR IN P_MATNR
         AND   A~WERKS IN P_PLANT
         AND   A~KZBEW IN (' ','B')
         AND   E~MATKL IN P_MGRP
         AND   A~BWART NOT IN ('541','542','321','322','121')
         AND   A~KZVBR NOT IN ('A')
         AND   D~BUDAT LE P_DATE-HIGH.
    LOOP AT OPBAL WHERE BWART EQ '544' AND LGORT EQ ''.
       TMP_OPBAL = OPBAL.
       APPEND TMP_OPBAL.
    ENDLOOP.
    DELETE OPBAL WHERE ( BWART EQ '309' AND DMBTR EQ 0  ).
    DELETE OPBAL WHERE ( BWART NE '543' AND LGORT EQ '' ).
    LOOP AT TMP_OPBAL.
       OPBAL = TMP_OPBAL.
       APPEND OPBAL.
    ENDLOOP.
    STOCKVAL = 0.
    SORT OPBAL BY MATNR BATCH BUDAT.
    LOOP AT OPBAL.
      SELECT SINGLE LBLAB INTO MSLB-LBLAB FROM MSLB
                            WHERE MATNR = OPBAL-MATNR.
      IF OPBAL-BUDAT LT P_DATE-LOW.
         IF OPBAL-SHKZG = 'H'.
            OPTOT = OPTOT - OPBAL-MENGE.
         ELSEIF OPBAL-SHKZG = 'S'.
            OPTOT = OPTOT + OPBAL-MENGE.
         ENDIF.
    For the duration   II part  *****************
      ELSEIF OPBAL-BUDAT IN P_DATE.
         IF OPBAL-SHKZG = 'H'.
            ISSTOT      = ISSTOT + OPBAL-MENGE.
         ELSEIF OPBAL-SHKZG = 'S'.
            RECTOT = RECTOT + OPBAL-MENGE.
         ENDIF.
      ENDIF.
    AT END OF BATCH. " modified for chek
       READ TABLE OPBAL INDEX SY-TABIX.
       CLEAR BAL_NOREF. REFRESH BAL_NOREF.
       SELECT MATNR SHKZG SUM( DMBTR )
         INTO TABLE BAL_NOREF
         FROM BSIM
        WHERE BUDAT LT P_DATE-LOW  AND
              MATNR EQ OPBAL-MATNR AND
              BWTAR EQ OPBAL-BATCH AND
              BWKEY IN P_PLANT     AND
              BLART IN ('RE','WE','WA','PR')
        GROUP BY MATNR SHKZG.
       LOOP AT BAL_NOREF.
          IF BAL_NOREF-SHKZG = 'H'.
             STOCKVAL = STOCKVAL - BAL_NOREF-DMBTR.
          ELSE.
             STOCKVAL = STOCKVAL + BAL_NOREF-DMBTR.
          ENDIF.
       ENDLOOP.
       CLEAR BAL_NOREF. REFRESH BAL_NOREF.
       SELECT MATNR SHKZG SUM( DMBTR )
         INTO TABLE BAL_NOREF
         FROM BSIM
        WHERE BUDAT IN P_DATE AND
              MATNR EQ OPBAL-MATNR AND
              BWTAR EQ OPBAL-BATCH AND
              BWKEY IN P_PLANT     AND
              BLART IN ('RE','WE','WA','PR')
        GROUP BY MATNR SHKZG.
       LOOP AT BAL_NOREF.
          IF BAL_NOREF-SHKZG = 'H'.
             ISS_STOCKVAL = ISS_STOCKVAL + BAL_NOREF-DMBTR.
          ELSE.
             REC_STOCKVAL = REC_STOCKVAL + BAL_NOREF-DMBTR.
          ENDIF.
       ENDLOOP.
       " MSLB-LBLAB (STOCK WITH SUBCONTRACTOR).
       CL_STKVAL       = STOCKVAL + REC_STOCKVAL - ISS_STOCKVAL.
       TOTALL =  OPTOT + RECTOT - ISSTOT.
       IF OPTOT = '0'   AND RECTOT = '0'  AND ISSTOT = '0'.
          FLG = 1.
       ENDIF.
       IF FLG = 1.
          CLEAR FLG.
       ELSE.
          SERNO = SERNO + 1.
          OPBAL2-SNO         = SERNO.
          OPBAL2-MATNR       = OPBAL-MATNR.
          OPBAL2-MAKTX       = OPBAL-MAKTX.
          OPBAL2-OP_BAL      = OPTOT.
          OPBAL2-REC         = RECTOT.
          OPBAL2-T_OPBAL_REC = OPTOT + RECTOT.
          OPBAL2-ISS         = ISSTOT.
          OPBAL2-T_ISS       = ISSTOT.
          OPBAL2-CL_BAL      = TOTALL.
          OPBAL2-BATCH       = OPBAL-BATCH.
          OPBAL2-SUBCON      = MSLB-LBLAB.
          OPBAL2-OP_STKVAL   = STOCKVAL.
          OPBAL2-ISS_STKVAL  = ISS_STOCKVAL.
          OPBAL2-REC_STKVAL  = REC_STOCKVAL.
          OPBAL2-CL_STKVAL   = CL_STKVAL.
          APPEND OPBAL2.
       ENDIF.
      OPTOT = 0.
      RECTOT = 0.
      ISSTOT = 0.
      STOCKVAL = 0.
      ISS_STOCKVAL = 0.
      REC_STOCKVAL = 0.
      CL_STKVAL    = 0.
    ENDAT.
    ENDLOOP.
      WA_SORT-SPOS = 1.
      WA_SORT-FIELDNAME = 'MATNR'.
      WA_SORT-UP = 'X'.
    WA_SORT-SUBTOT = 'X'.
    APPEND WA_SORT TO IT_SORT.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM = REPID
          IT_FIELDCAT        = IT_FLDCAT
          IT_EVENTS          = IT_EVENTS
          IS_LAYOUT          = GS_LAYOUT
          IT_SORT            = IT_SORT
        TABLES
          T_OUTTAB           = OPBAL2.
    FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
       PERFORM FILL_PARAM_FLDCAT USING  1 'SNo'          'SNO'       ' ' 'X'
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  2 'Material No.' 'MATNR'     ' ' 'X'
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  3 'Description'  'MAKTX'     ' ' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  4 'Op.Bal'      'OP_BAL'     'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  5 'Op.Stock Val' 'OP_STKVAL' 'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  6 'Receipts'     'REC'       'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  7 'Total'     'T_OPBAL_REC'  'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  8 'Rect.Val.' 'REC_STKVAL'   'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING  9 'Issues'    'ISS'          'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING 10 'Iss. Val.' 'ISS_STKVAL'   'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING 11 'Cl. Bal.'     'CL_BAL'    'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING 12 'Cl.Stock Val' 'CL_STKVAL' 'X' ' '
       'OPBAL2' P_FLDCAT.
       PERFORM FILL_PARAM_FLDCAT USING 13 'BATCH '       'BATCH'     ' ' ' '
       'OPBAL2' P_FLDCAT.
    ENDFORM.
    FORM FILL_PARAM_FLDCAT USING VALUE(P_COL) VALUE(P_TEXT) VALUE(P_FLDNAME)
                           VALUE(P_DOSUM) VALUE(P_NOZERO) VALUE(P_TABNAME)
                           PP_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
       DATA : WA_FLDCAT TYPE SLIS_FIELDCAT_ALV.
       CLEAR WA_FLDCAT.
         WA_FLDCAT-COL_POS   = P_COL.
         WA_FLDCAT-SELTEXT_M = P_TEXT.
         WA_FLDCAT-FIELDNAME = P_FLDNAME.
         WA_FLDCAT-TABNAME   = P_TABNAME.
         WA_FLDCAT-DO_SUM    = P_DOSUM.
         WA_FLDCAT-NO_ZERO   = P_NOZERO.
       APPEND WA_FLDCAT TO PP_FLDCAT.
    ENDFORM.
    FORM FILL_HEADER USING P_IT_LIST_HEADER TYPE SLIS_T_LISTHEADER.
      DATA: LS_LINE TYPE SLIS_LISTHEADER.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-INFO = TEXT-002.
      APPEND LS_LINE TO P_IT_LIST_HEADER.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-INFO = DISPTEXT.
      APPEND LS_LINE TO P_IT_LIST_HEADER.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-INFO = DISPTEXT2.
      APPEND LS_LINE TO P_IT_LIST_HEADER.
    ENDFORM.
    FORM FILL_EVENTS USING P_IT_EVENTS TYPE SLIS_T_EVENT.
       DATA LS_EVENT TYPE SLIS_ALV_EVENT.
       MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
       MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
       APPEND LS_EVENT TO P_IT_EVENTS.
    ENDFORM.
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         IT_LIST_COMMENTARY       = IT_LIST_HEADER.
    ENDFORM.
    FORM FILL_LAYOUT USING P_GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
       P_GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
       P_GS_LAYOUT-ZEBRA             = 'X'.
       P_GS_LAYOUT-FLEXIBLE_KEY      = 'X'.
    ENDFORM.
    FOR TESTING PURPOSE.
    *SORT OPBAL BY BUDAT.
    *CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         I_CALLBACK_PROGRAM = REPID
         IT_FIELDCAT        = IT_FLDCAT
         IT_EVENTS          = IT_EVENTS
       TABLES
         T_OUTTAB           = OPBAL.
    *FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
      PERFORM FILL_PARAM_FLDCAT USING  1 'MBLNR'        'MBLNR'
      'OPBAL' P_FLDCAT.
      PERFORM FILL_PARAM_FLDCAT USING  2 'CREDIT/DEBIT' 'SHKZG'
      'OPBAL' P_FLDCAT.
      PERFORM FILL_PARAM_FLDCAT USING  3 'MOV.TYP.'     'BWART'
      'OPBAL' P_FLDCAT.
      PERFORM FILL_PARAM_FLDCAT USING  4 'ST.LOC.'     'LGORT'
      'OPBAL' P_FLDCAT.
      PERFORM FILL_PARAM_FLDCAT USING  5 'STOCK VAL'    'DMBTR'
      'OPBAL' P_FLDCAT.
      PERFORM FILL_PARAM_FLDCAT USING  6 'POS.DATE'     'BUDAT'
      'OPBAL' P_FLDCAT.
    *ENDFORM.

Maybe you are looking for

  • Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

    Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak) Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

  • How to call Java Map in XSLT map

    Hello, Can anyone tell me how to call Java Map in XSLT map. Thanks and Regards Hemant

  • Is this even possible with PSE 11?

    I am a long time user of PSE 2.  It lacks one functionality I would like to use: when I make a custom brush that uses multiple separate points, such as the ones shown at the beginning here: http://div.dyndns.org/EK/tutorial/froofy/, the brush has no

  • Hba information in solaris 9

    Hi All, I want to know the command to check for hba information in solaris 9..i know prtconf -v however it is not giving exact hbainformation such port number and I want to know exact port number and node number and no of hba ports.. Please do the ne

  • Keep getting crashes with EXC_BAD_ACCESS - tried everything

    Dear BB'ers, Having tried everything I have seen in the BB's and I need advice on what to do next. I keep getting application crashes with the following log entry: Exception: EXCBADACCESS (0x0001) Codes: KERNINVALIDADDRESS (0x0001) at 0x0bbbe000 (Toa