Stange output from Xorg 'startx'

These don't feel like "real" error messages, there's no (EE) output on the /var/log/Xorg.0.log file... But this output from calling the startx command to start Xorg, is really strange, I never had something like this ever happening from the many times I've installed Xorg.
I'm running Arch on VMware Workstation by the way...
Any ideas how to fix some of these problems?
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux NAZBOX-ARCH 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/69545e21-8d63-4347-9712-5089d2cda505 ro vga=0x0340
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 22 04:27:29 2009
(==) Using config file: "/etc/X11/xorg.conf"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
GNOME_KEYRING_SOCKET=/tmp/keyring-yXZCY0/socket
SSH_AUTH_SOCK=/tmp/keyring-yXZCY0/socket.ssh
GNOME_KEYRING_PID=4918
(gnome-settings-daemon:4917): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(gnome-settings-daemon:4917): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Window manager warning: Failed to read saved session file /home/nazgulled/.config/metacity/sessions/10f0dd2ed0c3770f58126145605170952500000049050011.ms: Failed to open file '/home/nazgulled/.config/metacity/sessions/10f0dd2ed0c3770f58126145605170952500000049050011.ms': No such file or directory
(polkit-gnome-authentication-agent-1:4946): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:4946): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
** Message: Initializing gksu extension...
Unable to open desktop file epiphany.desktop for panel launcher
Unable to open desktop file evolution.desktop for panel launcher
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
waiting for X server to shut down gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
(vmware-user:4943): Gtk-WARNING **: cannot open display: :0.0

Not sure if this will help as I don't run gnome, but after a recent update when I ran startx I was getting a bunch of those doodad errors myself. After going through http://bbs.archlinux.org/viewtopic.php?id=56072 and disabling numlockx in my xinitrc I had no more errors.
Last edited by Pi (2009-12-22 17:49:11)

Similar Messages

Xorg freezes, video lags, high log output (linux,xorg-server,nvidia)

Hey,
It seems the up-to-date system doesn't work for my Laptop anymore. Wasn't too sure where to post this, as I couldn't test this anywhere else yet.
I experience extreme lags in Xorg (apparently due to high log output to Xorg.0.log as mentioned here: https://bbs.archlinux.org/viewtopic.php … 9#p1305939 ). These lags seem to be related to Xorg, the linux kernel and maybe something else I haven't found yet.
Concerning the hardware: Dell XPS 1340 with:
00:00.0 Host bridge: NVIDIA Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: NVIDIA Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: NVIDIA Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: NVIDIA Corporation MCP79 Co-processor (rev b1)
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: NVIDIA Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1)
00:0b.0 SATA controller: NVIDIA Corporation MCP79 AHCI Controller (rev b1)
00:0c.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
01:07.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:07.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:07.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:07.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
02:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce 9200M GS] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1)
06:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
I tested the up-to-date nvidia and nouveau drivers, to no avail. They both spam Xorg.0.log as soon as I watch a video, move a window or do something similiar "hi-res" in Gnome, leading to lags in all applications and X itself until it dies from high CPU usage + high chip temperature.
So I started downgrading my system.
I tested linux 3.9.9 but that didn't do the trick.
Currently I'm on linux 3.8.8-2, nvidia 313.30-5 and xorg-server 1.13.3-1, xf86-input-evdev 2.7.3-2 and xf86-input-wacom 0.20.0-1. This seems to be stable so far, the extreme X log output persists though, as soon as an external monitor is plugged in:
[ 234.963] (II) NVIDIA(GPU-0): Display (DELL2407WFPHC (DFP-1)) does not support NVIDIA 3D
[ 234.963] (II) NVIDIA(GPU-0): Vision stereo.
[ 234.963] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 234.963] (**) NVIDIA(0): device DELL2407WFPHC (DFP-1) (Using EDID frequencies has
[ 234.963] (**) NVIDIA(0): been enabled on all display devices.)
I tried nvidia drivers with and without my xorg.conf.d snippets, but that didn't change anything.
I'm kinda clueless... which package is the odd one out? All of them? At this point I wouldn't even know where to file a bug report.
I've been away for a couple of months and didn't upgrade the system too often in between, but this behavior is really odd.
Any ideas/ help would be highly appreciated!

Okay... I can definitely revise my statement about the Xorg.0.log. It has been the same since yesterday... so the spamming is gone!
I'd really like to find out if this is a linux kernel or a direct Xorg problem (of version 1.14 and above).

[solved] init 5 and logout from Xorg session -- crash

Hi guys and gals!
Hope this is the right forum.
I have a strange issue here with restarting Xorg sessions. As long as I just boot up or use Ctrl+Alt+Backspace to start and shutdown X, there's no problem at all, session manager (kdm) comes up properly and everything is just fine. But if I logout from the environment (KDE3), Xorg crashes and I get a black screen with a blinking cursor or even full of strange y" symbols on vc/7.
On the other virtual consoles I'm able to run startx and this is still in runlevel 5!
Here are the last 50 lines from Xorg.0.log after such a crash:
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard0: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 3, should be 2; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80e053e]
1: [0xb7f7c420]
2: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001216X+0xe5) [0xb71cf711]
3: [0x1]
Fatal server error:
Caught signal 11. Server aborting
BTW: nvidia-96xx 96.43.05-1
Of course, I can switch to runlevel 3 and then 5 again to get a session manager, but you have to be root for this and I got other users here. So this is quite stupid.
I can't remember to had this problem before, it seems to be since my update yesterday. Repositories only current, extra and community, pacnew files are all merged with my configs. Don't see any cause.
Can anyone help me with this?
Thanks.
Last edited by Trac3R (2008-03-30 11:54:24)

This is already in another thread : http://bbs.archlinux.org/viewtopic.php?id=43799
It's probably a nvidia bug, but there is a workaround given at the end of the other thread.

[Trick] Use Keyboard + Mouse from Xorg to control another Xorg session

So you have two computers sitting together, you don't have a kvm switch, and using two keyboards and mice is just plan annoying!
X2X is the solution. This program allows you to use your mouse and keyboard from Computer A on Computer B.
From the man page
x2x allows the keyboard and mouse on one ("from") X display to be used to control another ("to") X display.
How to make it work?
Allow TCP from xorg on both systems
Edit /etc/X11/xinit/xserverrc and change
exec /usr/bin/X -nolisten tcp
to
exec /usr/bin/X
Computer A = computer that has the keyboard and mouse you want to use
Computer B = computer that does not have the keyboard and mouse you want to use hooked up to it
On Computer B run the command
xhost +ComputerA
Where ComputerA is the hostname/ip address of ComputerA
This allows ComputerA to connect to ComputerB's xorg server
On Computer A run the command
x2x -to ComputerB:0.0 -west
Where ComputerB is the hostname/ip address of ComputerB
Now on ComputerA you should be able to move the mouse left, off the screen, and be able to control ComputerB!
I use this to control my laptop using my desktop's mouse and keyboard. It's a lot easier than switching between my desktop keyboard/mouse and laptop keyboard/mouse!

diederick76 wrote:
I have used x2x for some time before I started using Arch, but recently I decided to start using it again to control my laptop from my desktop box. I have installed x2x on the laptop. However, when I do
# ssh -X laptop 'x2x -west -to :0'
I get:
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 25 (X_SendEvent)
Resource id in failed request: 0x400001b
Serial number of failed request: 21
Current serial number in output stream: 21
I have tried following your howto, but I seem unable to start X with tcp support. I have changed /etc/X11/xinit/xserverrc as you instructed, but when I start X and issue
ps ax | grep X
from a console, I still get:
1670 tty7 Ss+ 0:15 /usr/bin/X -nolisten tcp vt07 -auth /var/run/slim.auth
Can you tell me what I'm missing? Are these at all related?
Thanks!
Today I was looking into this and got working very fast using this thread. Are you sure you restarted your X server after changing xserverrc? Are you sure your display is at :0?
Use
echo $DISPLAY
on the terminal to find out. Also you need x2x installed on both machines.
Last edited by quiquex (2011-11-08 18:59:08)

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Unable to output from FCP to Canon XL1.

I have an eMac with Final Cut Pro 4.5 HD. I also have a Canon XL1 3 CCD camcorder.
I have no problem capturing footage from my camcorder to my eMac on FCP. I can also connect my Canon to my VCR and record off my camcorder to my TV, as well as play the tape on my camcorder to watch it on TV.
However, I cannot output from FCP to my camcorder. The 4 to 6 FireWire is attached to both the camera and the eMac and I checked the Log and Capture feature and FCP does recognize a camera or deck is attached. I've been trying to output it using manual record in which I press record on my camcorder and play the playhead on FCP. As I record, there is no picture on my viewfinder, nor any audio being recorded and when I play it back, I just get this blank blue screen, but the timecode is recorded.
Am I missing something here?

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

How to Generate CSV Output from JD Edwards BI Publisher

Hi All,
I have a report "Critical Date Report" - R15611 in JD Edwards 8.11. This report has to be generated as CSV output from BI Publisher which is embedded to JDE.
The purpose we want use BI Publisher is to move some of the data displaying to different place in the page(ex: Move the company address from top left corner to Bottom right corner).
In order to achieve this
1.We created blank rtf template and upload to XML repository using P95600 application
2.Create report definition using P95620 application
3.Here I see the available output types as PDF,RTF,HTML,EXCEL,POWERPOINT and XML,ETEXT(GRAYED OUT)
Which output type we can use for CSV ?
4.Execute the report definition of the critical date report from P95620 to get the XML source
5.This XML source will be loaded into the blank rtf template
6.From this point no idea how to design the rtf template in order to get the CSV output.
7.We did design and output type as excel - but the result data is not in good formatting and alignment*(Headers and footers are repeating).*
If any one has worked on similar type of requirement,let us know how to do or send a sample XML source,rtf template and how the CSV output will be. Or any document link present in Oracle site will be helpful. Please let me know if you need more details.
Thanks in Advance.
Vijay

Hi Vijay,
For CSV output, you need an E-text template (not RTF) that's why its grayed out! You can use Excel as output type and have (No headers and footers) , then you can open the file in Excel and store it as CSV. Does not always display correctly though.
Why are you compelled to use BI publisher? you can use the JDE standard csv output report, (as is used by most EDI systems) of course this may involve a bit of customization if you wants the fields arranged differently.
-Domnic

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

Changing the seeded rdf report output from text to PDF

Hi All,
I am trying to change the seeded report "Print Requisition Report" output from text to PDF. I changed the output format in the concurrent program definition from text to pdf. The report is now getting displayed in pdf format, but the alignment of the fields are changed. The output is not printing as it was printing while in the text output format. The output looks very sloppy, with uneven fonts and too much of text wrapping.
I tried some formatting and fields are somehow getting displayed but doesnt look in proper format. I am not able to change the font style in the report builder 6i, even if i change it is printing in the same font style with uneven font size. I think reducing the font size might help, but i am unable to change.We are on 11.5.10.2. Please provide your valuable suggestions on how to go about.
Thanks
Sarvesh

Hi Hussein,
Thanks for the information. After the adjustments in the layout and the font change the report is now getting displayed without any clipping when clicked on view output. But when the same report is printed some characters on the left and and right side is getting clipped. Please help on how to solve this issue.
Thanks,
Sarvesh

How to capture graphical outputs from other programs

Does anyone know how we capture the graphical outputs from the other programs and show them
on the swing?
I'd like to use a java program to run gnuplot, capture the outputs, and show them using swing.

Depends on what you mean by "graphic outputs".
Taking a quick glance at the gnuplot homepage, it looks as if you can output to PNG files, so just run the app, and load the png file.

JDev generated webservices encodes XML output from PL/SQL procedure

I have a PL/SQL packaged procedure which takes some input parameters and produces one output parameter. The output parameter is of type CLOB and after the procedure has run, it contains a big piece of XML data.
Using JDeveloper 10.1.3.1, I've published this packaged procedure as a webservice. The generated webservice is fine and works, except for one tiny little issue: the XML that is taken from the output parameter is encoded.
Here is an example of the SOAP message that the webservice returns:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://gbv0300u/GBV0300U.wsdl/types/"><env:Body><ns0:gbv0300uResponse
Element><ns0:result><ns0:obvglijstOut> & gt;type>GBV0001& gt ;/type& lt;
& gt;diensten& lt;
& gt;dienst>some value& gt;/dienst& lt;
& gt;/diensten& lt;
</ns0:obvglijstOut></ns0:result></ns0:gbv0300uResponseElement></env:Body></env:Envelope>
(I've manually added an extra space between the & and lt; or gt; to make sure a browser will not translate it into a < or >!)
The contents of the <ns0:obvglijstOut> element are filled with the output parameter from the PL/SQL package.
How can I change the generated webservice, so the output from the PL/SQL package is used as is instead of being encoded?

Update: I've tested a bit more by adding some output statements to the java code that JDeveloper generated. I'm now 100% sure the PL/SQL code gives the XML data correctly to the webservice.
At this moment my guess is that somewhere in the WSDL definition there is something that enables the encoding of the data. But I'm not sure.
Any help is greatly appreciated.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

I am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. please help

i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.

What output are you trying to get to your tv?

Reading the output from a object running in the local machine.

Reading the output from a object running in the local machine.
By using a signed applet i am lunching a small application that returns an image object, how to read that without storing it in the hard disk.
Which means i need to read the image object return by the local application using applet or jsp .
i am using tomacat and an html page with an applet with it to lunch the application.

You can write that image in a binary format using OutputStream for System.out and then read it in your applet.

Stange output from Xorg 'startx'

Similar Messages

Maybe you are looking for