Staples rewards website not loading, it says it is done but the screen is blank, why?????????

I try to go to this website but it says it was done loading and it is just a blank screen.
== URL of affected sites ==
http://www.staplesrewardscenter.com or https://www.staplesrewardscenter.com

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Similar Messages

  • My ipad turns in but will not boot up. screen stays blank. I've tried resetting it and rebooting from itunes. It says it is done but the screen still stays blank. The apple icone will show up intermittetly.

    I turned on my ipad after charging it and the screen went blank. I tried the home button and on off button and that did not help. I went to iTunes and rebooted the ipad and restored it and it asked me to reboot from the ipad but the screen is still blank. It will go to a blue screen if I hit the on/off button. What else is there to check?

    If you restored the iPad, there is nothing else to check. I suggest that you make an appointment at an Apple Store Genius Bar and let them evaluate your iPad.

  • My iPod touch will not power on.; The charger is plugged in but the screen is blank.

    My iPod Touch will not power on. charger is plugged in but the screen is blank.

    Hello Dennisom,
    The troubleshooting detailed below can help get your iPod Touch to charge.
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • TS3297 After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

    After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

    I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
    I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
    I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
    Any help at all will be very much appreciated. I think this started August. 8, 2011.
    thanks so much for reading

  • I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My IPod 4th Gen is not working, i am not shore if it is just broken but the screen will not turn on. i can hear the sounds but the screen id blank

    i need ur help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Widget Browser Loads but the screen is blank

    Hello,
    Some weeks ago I downloaded Widget Browser to my laptop and it did not work.  Scott Richards made different versions to try and came up with a solution.  Widget Browser worked on my laptop.
    Now I am home with my desktop computer and tried installing Widget Browser.  First I tried the "build" I used on the laptop.  It did not work.  I tried the new "build" I downloaded from Adobe.  It has a blank screen too.
    My desktop has the newest Air running since that was updated a little while ago.  It's a Mac  Pro running 10.6.4, lots of RAM, and CS5.
    Is there a "build" to try so Widget Browser will work on the desktop?
    bill oudegeest

    We have posted a special build for those who are experiencing the blank screen problem on the Mac.  It is located here:
    http://download.macromedia.com/pub/labs/widgetbrowser/widgetbrowser_540.air
    Sorry for the incovenience, If you are experiencing this problem.  Download this version and don't update to build 543.
    We will continue to try and reproduce this problem on our side and come up with a better fix.  Please let us know if you have any more info about this problem or what may be causing it.
    -Scott Richards
    Dreawmeaver Team

  • I plug in my iPad and sync it with iTunes and it says it's done, but the songs I synced on my iPad aren't there. How do I fix this?

    It no longer updates when connected to WiFi and it doens't sync when I plug it into iTunes.

    Like Tiffany, I too get the same message when I try to sync my ipad. I have a library and so does my husband. Both libraries are on the same computer, created at different times, with different content.  He has a movie in his library but it shows (as do his music, apps, etc) in my library.  When we try to sync the movie from either library we get the message. How do we complete the sync and how do we seperate the libraries?

  • IPad says 10 updates pending but Update screen is blank...

    My iPad shows 10 app updates ready to download, but when I select the "Update" option, my screen is blank. How can I access my pending app updates?

    If you are getting the blank app update screen, many people are having this problem over the last couple of days. Hundreds of people in fact. Apple is hopefully working on a fix.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • I have only had my iphone for about six weeks and today it will not turn on, nothing happened to it but the screen is black.

    I have only had my iphone for about six weeks, and today it just died. Nothing happened to it, but I went to call someone and the screen was black, now it won't turn on or charge!????

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

    What it says in the title.
    I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
    Now it won't turn back on. It plays the start up music but the screen stays blank.
    The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
    I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
    From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
    Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
    This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

    kodemage wrote:
    well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
    I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
    Good luck.

  • Image slideshow on website not loading on mobile but works fine on other mobile browsers

    I designed a mobile website for (esinrestaurant.com). This is a new site and when I was trying to look at it today on Firefox 21.0 on my Droid (4.0) phone, I noticed that the slideshow that is supposed to appear on the Home page just below the logo, is not loading. I thought it might be a timeout problem but it still doesn't load if I use WiFi. Note that if I try to view this website on the native droid browser, Chrome an Opera the slideshow is displayed correctly. I tried clearing the cache and resetting my phone and still no luck. I discussed this problem with the company that provides my mobile tools and when he tried to look at the website it loaded correctly on his Droid phone using the same Firefox 21.0. So what could be going on? If the customer sees this problem I need to be able to fix it or at least explain why it is happening.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies, do the following:
    #Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
    #Tap '''Settings'''.
    #After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
    #You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
    #*Cookies & active logins
    #*Cache
    #After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
    Did this help you with your problems? Please let us know!

  • Websites not loading correctly/can't login to some

    Websites not loading correctly/can't login
    I've never used it much but I decided to try using firefox full time this week.
    I installed it and loaded flash, java and anything else basic that I was asked to.
    But I haven't screwed around with the settings, other than the troubleshooting steps on this site.
    I'm going to use this site as an exmaple: http://www.autoitscript.com/forum/index.php?
    The reason being it exhibts both of the problems below.
    Problem 1 - Not loading correctly:
    First here's a link to a screen shot of the problem.
    http://img85.imageshack.us/img85/963/firefoxscreenshots.png
    The top half is the page loaded from IE, the bottom half is Firefox.
    Now when the page finishes loading in Firefox it looks exactly the same as IE for a second.
    Then it changes into the image I attached.
    Problem 2 - Can't log in
    http://www.autoitscript.com/forum/index.php?app=core&module=global&section=login
    Now once again the login screen looks a bit different in IE and firefox.
    once again it looks normal for a second in firefox.
    I enter the correct username/password, and click sign in.
    It comes back "you must complete both fields" and after a few seconds jumps back to the forum home page.
    I had a problem registering and dealing with forums registering with mozilla.com
    I would fill in the registration form hit submit and I'd just jump back to a blank form again.
    I've been using IE to register and submit this question.
    Thanks,
    Kenny
    == This happened ==
    Every time Firefox opened
    == As soon as I installed it

    Can you check your [[JavaScript]] settings and makes sure JavaScript is enabled?
    It seems like some preference may have been changed that affects the way content is displayed. Another way to troubleshoot is to try creating a fresh profile, check out the article on [[Managing Profiles]] to learn how to do this.
    -n.

  • My google calendar will not load it says that is being redirected and will never complete. I have done what was requested and it still will not work?

    My google calendar will not load it says that is being redirected and will never complete. I have done what was requested and it still will not work?

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • HT1689 featured tab in app store not loading , message says not available in Uk

    the featured apps will not load ,message says not available in UK.
    I have tried changing the date and turning off automatic time

    I already started a thread about this.  https://discussions.apple.com/thread/3540913?tstart=0
    I'm experiencing the same issues.  If I log OUT of the store...everything works ok.  Log in and can see nothing.

Maybe you are looking for

  • Category Attribute - Text

    Dear MDM Experts, I want to import a quite long text into a Category Attribute, but when I do the mapping in the Import Manager, the message says that the imported text is too long, and it will be cutted to 128 character. Is there any solution for th

  • How can I change the message for an error and then cancel it

    Hi everyone. I am currently developing an application where I have to use a trigger (DAQmx). Now it can happen, that the user (who will operate the device later on) can activate the trigger without a valid source. After a timeout, he will get a quite

  • Task List flow configuration

    Is there a way in Planning 11.1.2 to configure the Task List flow in such a way that it is not possible for a user to go to the next task if the Web form in the current task has any validation errors? Regards, Pablo

  • Again, extremely slow movie downloads from itunes store

    I'm on broadstripe cable and I'm speed testing at about 5.6-6.0 for downloads.... internet pages load fine, etc. When renting a movie on itunes through appleTV I have to wait hours for the movie to download so i can watch it. Any ideas? Thanks!

  • Satellite 1410 - slow even after formating

    My computer became really slow (I cannot watch videos), so I thought I had a virus and I scanned my pc. He found a virus called "fast.exe", I deleted this file but I still had some problems, so I decided to format the pc using the recovery disks but