Starcraft 2 Downloaded Installer wont Run [Solved]
I have isntalled, Wine, winecfg, winetricks, gecko
I did the mmapi disabled trick.
I downloaded the Starcraft 2 Installer from their website.
When I double click the exe I get "The application could not be executed for some reason. Please close all applications and try again."
I am using XFCE Archlinux 86_64.
I have consulted the wikki.
Heres the output of wine when running:
[root@myhost jacob]# wine '/home/jacob/StarCraft_2_NA_en-US.exe'
fixme:process:GetLogicalProcessorInformation ((nil),0x32e368): stub
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (60000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 60000
err:wincodecs:JpegDecoder_CreateInstance Failed reading JPEG because unable to find libjpeg.so.8
fixme:ole:CoCreateInstance no instance created for interface {9edde9e7-8dee-47ea-99df-e6faf2ed44bf} of class {9456a480-e88b-43ea-9e73-0b2d9b71b1ca}, hres is 0x80004005
err:ole:OleLoadPicture IPersistStream_Load failed
SOLVED:
Was missing # pacman -S lib32-openal (this line is only necessary for x86_64)
and # pacman -S lib32-libjpeg lib32-libldap (this line is only necessary for x86_64)
man I gotta read wikki more carefully its soo incredibly helpful and solves everything I just tend to skip over it by glancing to fast
Last edited by kanazky (2011-11-03 07:16:35)
Hi.
I had a similar issue, see my post on this topic: http://discussions.apple.com/thread.jspa?threadID=910130&tstart=15
Good luck!
Diego
Similar Messages
-
Downloaded, but wont run!!!
I recently downloaded the new version of iTunes and once i clicked run, a box came up with 'windows installer' information i clicked ok and nothing happened, and no matter how many times i try it just doesnt seem to launch the process of installation. Any suggestions would be greatly apprecaited
Hi.
I had a similar issue, see my post on this topic: http://discussions.apple.com/thread.jspa?threadID=910130&tstart=15
Good luck!
Diego -
BMPX wont run (SOLVED)
Hi,
When I try bmpx I get;
** (beep-media-player-2:15110): CRITICAL **: DBus Error: (org.freedesktop.DBus.Error.Spawn.ChildExited): Process /usr/libexec/beep-media-player-2-bin exited with status 127
dbus is running as a
echo $DBUS_SESSION_BUS_ADDRESS
gives
unix:abstract=/tmp/dbus-LSSfd9V3B1,guid=7863294578e7a4123786d1bd31860400
Any ideas anyone??
OK, several days later, I found a post about bmpx needing neon to run. I pacmanned neon and now bmpx works.
Jimhave you solved the issue? This seems to give a clue: http://bmpx.beep-media-player.org/site/ … at_startup however I do not feel like recompiling anything
-
I downloaded Itunes today and when i click on it go to busy mouse and then does nothing. No error message. can you help? I have an Windows XP
Jesse,
If you right click on the task bar, select Task Manager. Is iTunes running in the background, just doesn't have a window open, or is it not running at all?
Do you have Norton Internet Security? Do you have iTunes 5.0 or 5.0.1? -
Apps installed on a previous os-x installation wont run
Hello.
I have a bunch of applications that I installed to /Users/homedir/Applications and one day the computer gave errors and couldn't boot. I reinstalled the system and restored my home dir from backup but the applications in /Users/homedir/Applicatins won't run. When I click on them, nothing happens other than some readjustments in dock. I tried to run the apps from terminal too se if there was error messages and I get LSOpenURLsWithRole() failed with error -10810 for everyone of them.
Anyone have a clue what the problem might be and maybe have a solution too?I suggest you reinstall them. Your reinstallation may have resulted in the loss of installed components. As for the error see:
The XLabs new FAQ on the -10810 Problem
Finder Error -10810 in Snow Leopard causing problems | MacFixIt - CNET Reviews -
Photoshop cs 4 wont run after installation on mac book pro
I recently brought the adobe design premium package with flash, illustrator, indesign, photoshop etc...
after installation all other application works but just photoshop, it just wont start at all...
it will pop up on the deck for a second or two and just disappear. the progra wont run at all. other applications like illustrator, indesign etc... all work just fine but just not photoshop... i dont get it what's wrong. no error or anything. just pop up and then disappear.
the spec of my macbook pro
mac osx 10.6.2
2.53 ghz intel core 2 duo
4 gb 1067 mhz ddr3So have you done the basics?
Toss the PS folder and run the installer again?
Run the updater from an app you can open? (this will update all)
etc... -
When I do initial set up with creative cloud set up it wont run a send error message "installer failed to initialize" comes up. Why and how can I get passed this?
Error "Installer Failed to Initialize" | Install desktop application | Windows
-
Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.
Hi Prat,
We are aware of this issue and are working on a fix. In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
Installation problems | Flash Player | Windows
Installation problems | Flash Player | Mac
The installers are at the bottom of the page, in the 'Still having problems' section.
Maria -
Unable to run cs6 after download & installation xp
I am unable to execute the program after installing Help?
I downloaded cs6 to external hard drive and tried to install but wouldnt
work. Will try to download to my laptop tonight directly to the hard
drive and see if that works.
Dave 7042327283
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: Unable to run cs6 after download & installation xp"
To view the discussion, visit:
http://forums.adobe.com/message/4633076#4633076Thanks for replying, -
"Another installer is running" is the error message I get when trying to download
I bought Creative Cloud but can't download the apps. I have been trying for days. It says Another installer is running and won'rt go further - but I have no other installer running.
Which operating system are you using? Have you tried rebooting your computer and trying again?
-
Any ideas on how to get this old game working on the newer model computer? The message I get is that it wont run it "because Classic environment is no longer supported".
You could look into Sheepshaver which supports older OS versions but I hear can be very tricky to install. you may also find that a game will not work on it because games often want to control the hardware directly and an OS7 game will have absolutely no idea how to run your computer. Frequently it is recommended you just buy an old Mac capable of running OS7.
Even if you had a Classic-capable computer it is still quite possible it would not run an OS7 game. I found many of my OS7 games stopped working even when I ran a computer actually booted to OS9.
Which game is this? Some old favorites are being re-released for OSX, e.g. Solarian.
By the way, it would be better to post this in the correct forum ((probably Snow Leopard) since this forum is intended for questions about how to use this web site. -
My hp support assistance wont run. It keeps stopping during updates and when deleting the temporary internet files. So it never finishes the process.. help
The failure to remove the Temporary Files could just be due to having your internet connection active during the removal process. For most folks, the amount of data in this directory is minimal. If you want / need to remove the files, you could close your browser(s), make sure your Internet music and TV connections are closed, and then try removing the files manually:
Path to Folder:
C:\Users\--YourAccountNameHere--\AppData\Local\Microsoft\Windows\Temporary Internet Files
Warning:
Do NOT remove the "Temporary Internet Folder" itself. Go "inside" the folder before removing anything.
====================================================================================
The HP Support Assistant is great when it works -- and not so great when it won't cooperate. You can try removing the program from your computer and installing it again. That may work.
Control Panel > icon view > Programs and Features >
Scroll down, find, and Uninstall HP Support Assistant.
Restart your computer after uninstalling the existing version of Support Assistant.
Install Support Assistant
HP Support Assistant
Using HP Support Assistant (Windows 8)
Troubleshooting HP Support Assistant
NOTE: At writing, there are possible issues with HPSA version 7.x -- you might want to sitck with version 6.x for now.
======================================================================================
If you have issues removing your version of HPSA:
Fix problems with programs that can't be installed or uninstalled
=====================================================================================
Workaround to get Updates:
If all avenues fail to bring joy and it just won't work, you can still get your updates from your computer's website.
Install Software and Drivers from HP Website
Go to the top of the HP forum page to Support and Drivers
If prompted, Enter your Country or Region and
Enter your Computer Model information,
Go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Select desired Category
Expand and decide if you need to install that package.
Assure that you download and install only the most recent versions of each driver or program.
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the computer’s website. Be sure to take an extended look at what’s available.
======================================================================================
Good Luck!
Kind Regards,
Dragon-Fur -
HT1925 windows 64 installer wont load on 8
Is anyone else having trouble downloading iTunes to windows 8. The installer downloads then wont open. Suggestions?
The installer downloads then wont open.
Are you getting an error message when you try to run the installer? If so, what does it say? (Precise text, please.) -
Mandrake Linux 8.0 - can't get Oracle Universal Installer to run
Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 525901824 116862976 409038848 0 6377472
61140992
Swap: 1069244416 0 1069244416
MemTotal: 513576 kB
MemFree: 399452 kB
MemShared: 0 kB
Buffers: 6228 kB
Cached: 59708 kB
Active: 63740 kB
Inact_dirty: 2196 kB
Inact_clean: 0 kB
Inact_target: 1072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 513576 kB
LowFree: 399452 kB
SwapTotal: 1044184 kB
SwapFree: 1044184 kB
User Limits (in bytes except for NOFILE and NPROC) -
RLIMIT_FSIZE : infinity
RLIMIT_DATA : infinity
RLIMIT_STACK : 2093056
RLIMIT_CORE : 0
RLIMIT_NOFILE : 1024
RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck! -
Oracle 8.1.7 on RH7.0 Installed fine now wont run at all!
I was able to install Oracle 8.1.7 on RH 7.0 using this fix... http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/README.Oracle8i
The database initialized correctly and I was able to setup and connect to the database. I even ran a port scanner and checked memmory...the thing was running! Then after the reboot the database wont run at all. When I type ./oracle it trys to load and then shows "Segmentation fault (core dumped)". When I try ./oracle start nothing is echoed. I tried to copy the lib files
ld-linux.so.2
libc-2.1.3.so
libdl.so
libpthread.so
to the $ORACLE_HOME/lib/ dir and followed John Smiley's howto but the relink script doesn't work! Even still I think something else is wrong other than the library. Can someone help?Nevermind figured it out:) Like duh, I should read the damn Installation file:?
Maybe you are looking for
-
Incoming MIDI data from unassociated devices still gets sent out in 2.1.3
The problem I have reported numerous times for previous versions of MainStage is still present in 2.1.3. An incoming MIDI CC value that is NOT associated with a device is being sent to other channel strips. Last night before rehearsal, I added a Mini
-
Methods to transfer Customer objects while Upgrading.
Hi, What are the possible methods of transferring Customer objects/programs etc while upgrading from 4.6 to 4.7 or ECC ? Any information will be helpful. Thanks, s<i><b>A</b></i>mik.
-
How to define LinkElement ID using IEditManager.applyLink
I'm using code of the form: IEditManager(_textFlow.interactionManager).applyLink(" http://www.cnn.com"); However, in my underlying markup, I'd like to have something like this: <flow:a href=" http://www.cnn.com" id="myID">My Link here</flow:a> Since
-
Winlogin is deleting folders and files on start-up
We have been using Crystal Reports Server X1 Release 2 since 2007. Week ago folders started dissaperaing and found out that there was a conflict with McCaffe update that deleted business objects folder and Tomcat stopped working. Now we are trying
-
Possible to update and insert in a table at a same time
Hi friends, I have a table with six columns in it. Initially that table will have seven rows with six columns, but all the columns wont have a content in it. But only one column will have the content of seven rows. so that's why initially it will hav