Staroffice 9 to SO9 Update 1 process fails

I downloaded the StarOffice9 Update 1 patch from sunsolve and followed the directions. I'm on Windows XP SP3. The update to SO9 fails every time with an error message in German. (I have a screen shot but am unsure if I can upload it here?) What I think it is saying is that it is looking for a file called "staroffice9.msi" in order to verify my installation (or something like that). There is no staroffice9.msi file on my computer. Maybe it was created when I installed SO9, but I delete installer files once the installation is complete. The patch update will not complete in any case, so I am stuck. Any suggestions?

I followed your advice and ran the original SO installer, which created the installation files on my desktop. I then canceled the rest of the installation and ran the patch update program. It worked fine, and now my system is patched to SO9 update 1. Thanks much for the helpful reply.
I must say, requiring an original .msi installer file in order to validate an update is really dumb. The installer unpacks almost 1/2 GB of files on the user's desktop. Why in the world would I want to keep those files around after my installation is done? Of course I erased them to get them off my desktop and off my disk. Then, 6 months later, I run a patch program which won't run if it can't find the original msi file. That's really not a good idea. If the updater needs to validate something, it should look for the staroffice exe file, which would make perfect sense. Looking for an msi file makes no sense for the reasons I've mentioned plus the fact that it doesn't even prove the program is installed on the system. This should be fixed!

Similar Messages

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

HT4623 update process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet."

my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.

Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.

StarOffice 6 & 7 update installation fails "Unbekannter Softwarefehler ..."

Ich erhalte nach dem Download der Patches für StarOffice 6 und auch für StarOffice 7 unter Windows XP SP2 diese Meldung
bq. *"Die Ausnahme "Unbekannter Softwarefhler" (0x0000409) ist in der Anwendung an der Stelle 0x77f1b0ba aufgetreten."*
Wer kann helfen ?

Hi,
Based on my research, the error reported by Solarwinds Diagnostic Tool is because your WSUS server has the "Directory Browsing" role service enabled in the Web Server role. If this is a dedicated WSUS server, then that is an erroneous configuration, causing
IIS to return an HTTP 403.14 error to the Diagnostic Tool, and it's displaying the standard error text for detecting an HTTP 403 error. This is a defect in your WSUS server, and the fix is to disable the Directory Browsing role service in the Web Server role.
If this is not a dedicated WSUS server, then the question is whether there are any other web applications or web services that require Directory Browsing to be enabled. If not, then you should remove the role service. If so, then this is a normal indication
for your implementation because IIS is returning an error to the Diagnostic Tool.
More details please go through the below similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/a14fdd06-5911-467c-8052-2e48408f2e9b/wsus-clients-reporting-but-not-recignizing-that-they-need-updates
We can check Windowsupdate.log to troubleshoot this issue, in addition, whether you can install the KB manually?
Regards,
Yan Li
Regards, Yan Li

HT201210 Ok so I'm trying to update my iPad, and it keeps "timing out." I got to the actual update process, and it failed and asked me to restore my iPad, but I just can't lose all of my apps and photos! Someone please help.

Ok so I'm trying to update my iPad, and it keeps "timing out." I got to the actual update process, and it failed and asked me to restore my iPad, but I just can't lose all of my apps and photos! I payed for a lot of my apps, and my photos are just too important. Someone please help!

If rhe apps and photos are that important you made sure that you took the steps in order to keep them safe in an event like this didn't you?
You did backup the iPad before you decided to update the iPad correct?
And you did transfer all of your apps and other purchases into iTunes before you decided to update correct?
If you did, just restore the iPad and then restore from the backup at the end of fhe process and follow that with a sync with iTunes and you will lose nothing,
Now if you didn't do any of the precautionary steps ....

I downloaded i tunes onto my new computer, i connected my iphone during the updating process itunes failed and i lost all my purchased music from my iphone. I would like to get it reinstated how ?

I downloaded itunes onto my new computer, i connected my iphone during the updating process itunes failed and i lost all my purchased music from my iphone and can no longer retrieve them. I would like to know how i can reinstate the lost music please.

When you are done with this issue, consider the computer back at the office may still
have access to your iTunes account, and it should be de-auhorized. You can do that
remotely, but be sure you carefully do not mess up your other computer iTunes libraries.
Good luck & happy computing!

I want to know, why the update process of firefox is not work correctly. Because of i begin update that is not work for along time(Connecting to the update server). So why should i do this problem. Please help me.

Update process is not work

See:
* [[Software Update Failed]]
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

CC updates always fail? Need help.

Hello all,
I have CC and a prompt to update Premiere Pro and Photoshop two programs I use frequently. Recently, however, I have been unable to open either because I have yet to install the updates. Problem: each time I try to install the updates they fail midway through the process. I've tried dozens of times and they never work.
There's only one thing I can think of.
When I first downloaded CC, it failed installing midway through each time as well. When I contacted support, they were able to instruct me to delete some temp file (or something or other) in the Adobe folder in finder, so I can imagine there may be a problem with that kind of cached file or something like that again. The whole issue had something to do with the fact that I had previously had a trial of CC months earlier.
Anyway, if anyone has a possible solution to this issue I'd be especially grateful. I am editing a film for film school that is *required* to be cut on Premiere though I'm usually working with other programs so it's time sensitive to a degree.
Thanks!

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Windows update KB3000850 fails with error: 0x800700a1

Windows update KB3000850 fails with the following error: 0x800700a1
In WindowsUpdate.log there is the following:
FATAL: CBS called Error with 0x800700a1
In CBS.log there is the following error:
2014-11-25 11:17:54, Error                 CSI    00000ea8 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11395486# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa81c89d2f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa81c89d398, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd000003b]2014-11-25 11:17:54, Error                 CSI    00000ea9@2014/11/25:11:17:54.259 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]

Tried all the suggestions in that thread, including running the DSIM tool.
Still getting the same error: 800700a1
I've uploaded the complete logs here: https://mega.co.nz/#F!wpZCHQRB!1GI7_PRJ3_S2nwITYVxDsg
This is a bigger snip from CBS.log around the errors:
2014-11-26 16:28:39, Info                  CSI    00000458 'From' Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.16384&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:39, Info                  CSI    00000459 Processing Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.17415&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:39, Info                  CSI    0000045a done
2014-11-26 16:28:39, Info                  CSI    00000e98 Regenerating payload files from delta files on component: [ml:280{140},l:186{93}]"amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.16384_none_0a1162f033fa01f6"
2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-11-26 16:28:39, Info                  CSI    00000e9a Created NT transaction (seq 2) result 0x00000000, handle @0xf7c
2014-11-26 16:28:39, Error                 CSI    00000e9b (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867646# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa2a758d410->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa2a758d4b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9c@2014/11/26:16:28:39.304 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141126162432.log to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141120100026.cab to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141028123021.cab to WER report.
2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info                  CBS    Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Error                 CSI    00000e9d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867645# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::TransferFile(flags = (ReplaceIfExists|OpenForBackupIntent), op = [8]"HardLink", odir = NULL, oname = [l:18{9}]"MSDTC.LOG", ndir = @0xa29be2af38, nname = [l:18{9}]"MSDTC.LOG", disp = (null))
[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867523# from CFileInstaller::DoComponentOperation(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867522# from CFileInstaller::ProcessComponentChange(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000ea0 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867521# from PrimitiveInstaller::CCoordinator::ProcessChange(Change 6.3.9600.16384 -> 6.3.9600.17415 for Microsoft-Windows-COM-DTC-Runtime, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral)[gle=0xd000003b]
2014-11-26 16:28:39, Info                  CSI    0000045b SMI Primitive Installer [done]
2014-11-26 16:28:40, Error                 CSI    00000ea1 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347192# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea2 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347191# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea3 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347190# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea4 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347189# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Info                  CSI    0000045c SMI Primitive Installer [started]
2014-11-26 16:28:40, Info                  CSI    0000045d 'From' Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17399&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info                  CSI    0000045e Processing Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info                  CSI    0000045f done
2014-11-26 16:28:40, Info                  CSI    00000460 'From' Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.16384&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info                  CSI    00000461 Processing Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info                  CSI    00000462 done
Is this the root cause?
2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
Is there supposed to be a "null" going into whatever that is?

Update install fail Error 81

Update install fail with Error 81 ; "another installer running" I have no other installers running on this machine. Any solutions to this? Thanks!

Hi,
This error appears when there are some background program running in the machine, the best option is to complete close the machines that all running process are closed. Restart the machine, it should work.
You can also kill all the process related to CC in task manager/activity monitor & then launch.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-bootstrapper-cs5.html #main_You_are_already_running_another_installer_
Regards,
Sheena

Updated software failed...iPod touch won't work now

I hooked my ipod touch to the computer & through itunes updated to the latest version. The update failed. Left it overnight & update still not done. Checked apple website. Said to restart computer. Now ipod when turned on has the itunes symbol with the usb plug picture. Started itunes & it said update failed you need to restore your ipod. How can I avoid this? It will erase everything on there. What about the apps I paid for?

If you are signed into the same iTunes account that originally purchased them, you can redownload apps at no additional cost.
http://support.apple.com/kb/HT2519
The fist part of the update process is for iTunes to make a backup of your iPod. If that was successful (look at date in iTunes preferences in Devices) then restoring from your backup together with syncing should restore you iPod to like it was when it was backed up.

The FIP-FS Scan Process failed initialization

Hello,
I am on exchange CU7 update and trying to get anti-malware and spam to work. I am constantly seeing the crashing of the FIP-FS service showing The FIP-FS Scan Process failed initialization. Error: 0x800706BE. Error Details: The remote procedure
call failed. Event ID 1106. I am also getting constant app crashes of the scanningprocess.exe showing
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: scanningprocess.exe
P2: 15.0.1044.24
P3: 546fc941
P4: scanningprocess.exe
P5: 15.0.1044.24
P6: 546fc941
P7: c0000005
P8: 000000000005a8f6
P9:
P10:
I have confirmed that updates are downloading for the malware database, but the services themselves are crashing for some reason. I have checked what settings I know about for spam and anti-malware and have run out of options. My FIP-FS service
is terminating about once every 8 min so it's killing me in trying to figure out what is wrong.

Ok. Perhaps you used any policy System Center Endpoint Protection
Policy for OU Exchange Server or Domain.
PS. In some cases, when a large flow of messages melvare filters and DLP can take up to 4 GB of memory for each filter. I do not know how many users you have in the postal system and its architecture, but it is recommended 24 GB of memory on the server
for production environments.
http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
PS. If you are using DLP, this module also uses ScanningProcess.exe
Anti-Virus Software in the Operating System on Exchange Server
ScanEngineTest.exe
%ExchangeInstallPath%FIP-FS\Bin
Content scanning component that's used by the Malware agent and DLP.
Mailbox servers
ScanningProcess.exe
%ExchangeInstallPath%FIP-FS\Bin
Content scanning component that's used by the Malware agent and DLP.
Mailbox servers
MCITP, MCSE. Regards, Oleg

Usage of IN UPDATE TASK in Update process

Hi
I want to synchronize the Lock and Rollback process with respect to
addon table and FI document posting.Need to consider that many addon programs are accessing the table at same time and may be bulk records need to be udpated sometimes.So may be more time to execute. I am trying to execute below in 1LUW process. pls correct me if i am doing wrong here. below is my issue.
Pls correct me whether can i go with below process.
1)Check and prepare record for Update
2)If (No) record exists
Display Error.
Else
3)call Function Enqueue_XXXXX " (Lock the Updating doc record for table.)
4)Call Function 'UPDATE_ZMMT44' IN UPDATE TASK(Inside FM Update stmt is written)
FI document standard Commit Work (hope this will release both table lock and BKPF lock)
FI standard Rollback Work
Issue
1)Lock Release timing of Enqueue process?
Lock Release happens only at the end of FI document Posting. if batch update happens it will lead to long time freeze and no error can be displayed unfortunately. how to handle this?
2)How to handle SQL error(Update <table> stmt error)
I am not able to catch this error inside program. seems it goes to ST22 ...how to catch this inside program?
My earlier query is not clear and i did not get answer so i am post it again
regards
prince
Edited by: princeck on Nov 18, 2011 2:28 AM

Hello Prince,
Regarding issue2, this is not solved, How to handle the SQL error when update record?
Now its going to SAP office and gives error. not showing error at same place.
This is the standard behavior when an "update"(processed via an Update WP) fails.
If you don't want this to happen you can opt for local updates(SET UPDATE TASK LOCAL). You would like to read the [behavior of messages in local updates|http://help.sap.com/abapdocu_702/en/abenabap_message_update.htm].
BR,
Suhas

Order management header level updation process for iStore order.

Hi all,
I worked on OM header level updation process for iStore order.only card holder name,expiration date updated using OE_ORDER_PUB.process_order but Credit card number,card type not updated for istore order in OM.so please help to me.
CODE:
SET SERVEROUTPUT ON;
DECLARE
v_api_version_number NUMBER := 1;
v_return_status VARCHAR2 (2000);
v_msg_count NUMBER;
v_msg_data VARCHAR2 (2000);
-- IN Variables --
v_header_rec oe_order_pub.header_rec_type;
v_line_tbl oe_order_pub.line_tbl_type;
v_action_request_tbl oe_order_pub.request_tbl_type;
v_line_adj_tbl oe_order_pub.line_adj_tbl_type;
-- OUT Variables --
v_header_rec_out oe_order_pub.header_rec_type;
v_header_val_rec_out oe_order_pub.header_val_rec_type;
v_header_adj_tbl_out oe_order_pub.header_adj_tbl_type;
v_header_adj_val_tbl_out oe_order_pub.header_adj_val_tbl_type;
v_header_price_att_tbl_out oe_order_pub.header_price_att_tbl_type;
v_header_adj_att_tbl_out oe_order_pub.header_adj_att_tbl_type;
v_header_adj_assoc_tbl_out oe_order_pub.header_adj_assoc_tbl_type;
v_header_scredit_tbl_out oe_order_pub.header_scredit_tbl_type;
v_header_scredit_val_tbl_out oe_order_pub.header_scredit_val_tbl_type;
v_line_tbl_out oe_order_pub.line_tbl_type;
v_line_val_tbl_out oe_order_pub.line_val_tbl_type;
v_line_adj_tbl_out oe_order_pub.line_adj_tbl_type;
v_line_adj_val_tbl_out oe_order_pub.line_adj_val_tbl_type;
v_line_price_att_tbl_out oe_order_pub.line_price_att_tbl_type;
v_line_adj_att_tbl_out oe_order_pub.line_adj_att_tbl_type;
v_line_adj_assoc_tbl_out oe_order_pub.line_adj_assoc_tbl_type;
v_line_scredit_tbl_out oe_order_pub.line_scredit_tbl_type;
v_line_scredit_val_tbl_out oe_order_pub.line_scredit_val_tbl_type;
v_lot_serial_tbl_out oe_order_pub.lot_serial_tbl_type;
v_lot_serial_val_tbl_out oe_order_pub.lot_serial_val_tbl_type;
v_action_request_tbl_out oe_order_pub.request_tbl_type;
v_msg_index NUMBER;
v_data VARCHAR2 (2000);
v_loop_count NUMBER;
v_debug_file VARCHAR2 (200);
b_return_status VARCHAR2 (200);
b_msg_count NUMBER;
b_msg_data VARCHAR2 (2000);
BEGIN
DBMS_OUTPUT.PUT_LINE('Starting of script');
-- Setting the Enviroment --
mo_global.init('ONT');
fnd_global.apps_initialize ( user_id => 1013438
,resp_id => 21623
,resp_appl_id => 660);
mo_global.set_policy_context('S',204);
-- Header Record --
v_header_rec := oe_order_pub.g_miss_header_rec;
v_header_rec.request_date := SYSDATE;
v_header_rec.header_id := 251413;
v_header_rec.credit_card_holder_name :='esakki';
v_header_rec.credit_card_number := 'XXXXXXXXXXXX3510';
v_header_rec.credit_card_expiration_date := to_date('01-JAN-2014','dd-mon-yyyy');
v_header_rec.credit_card_code := 'MASTERCARD';
v_header_rec.payment_type_code := 'CREDIT_CARD';
v_header_rec.sold_to_org_id := 131747;
v_header_rec.sold_from_org_id := 204;
v_header_rec.ordered_date := SYSDATE;
v_header_rec.operation := OE_GLOBALS.G_OPR_UPDATE;
v_action_request_tbl (1) := oe_order_pub.g_miss_request_rec;
-- Line Record --
v_line_tbl (1) := oe_order_pub.g_miss_line_rec;
DBMS_OUTPUT.PUT_LINE('Starting of API');
-- Calling the API to update the header details of an existing Order --
OE_ORDER_PUB.PROCESS_ORDER (
p_org_id =>204
,p_operating_unit => NULL
p_api_version_number => v_api_version_number
,p_init_msg_list => fnd_api.g_false
,p_return_values => fnd_api.g_false
,p_action_commit => fnd_api.g_false
, p_header_rec => v_header_rec
, p_line_tbl => v_line_tbl
, p_action_request_tbl => v_action_request_tbl
, p_line_adj_tbl => v_line_adj_tbl
-- OUT variables
, x_header_rec => v_header_rec_out
, x_header_val_rec => v_header_val_rec_out
, x_header_adj_tbl => v_header_adj_tbl_out
, x_header_adj_val_tbl => v_header_adj_val_tbl_out
, x_header_price_att_tbl => v_header_price_att_tbl_out
, x_header_adj_att_tbl => v_header_adj_att_tbl_out
, x_header_adj_assoc_tbl => v_header_adj_assoc_tbl_out
, x_header_scredit_tbl => v_header_scredit_tbl_out
, x_header_scredit_val_tbl => v_header_scredit_val_tbl_out
, x_line_tbl => v_line_tbl_out
, x_line_val_tbl => v_line_val_tbl_out
, x_line_adj_tbl => v_line_adj_tbl_out
, x_line_adj_val_tbl => v_line_adj_val_tbl_out
, x_line_price_att_tbl => v_line_price_att_tbl_out
, x_line_adj_att_tbl => v_line_adj_att_tbl_out
, x_line_adj_assoc_tbl => v_line_adj_assoc_tbl_out
, x_line_scredit_tbl => v_line_scredit_tbl_out
, x_line_scredit_val_tbl => v_line_scredit_val_tbl_out
, x_lot_serial_tbl => v_lot_serial_tbl_out
, x_lot_serial_val_tbl => v_lot_serial_val_tbl_out
, x_action_request_tbl => v_action_request_tbl_out
, x_return_status => v_return_status
, x_msg_count => v_msg_count
, x_msg_data => v_msg_data
DBMS_OUTPUT.PUT_LINE('Completion of API');
IF v_return_status = fnd_api.g_ret_sts_success THEN
COMMIT;
DBMS_OUTPUT.put_line ('Order Header Updation Success : '||v_header_rec_out.header_id);
ELSE
DBMS_OUTPUT.put_line ('Order Header Updation failed:'||v_msg_data);
ROLLBACK;
FOR i IN 1 .. v_msg_count
LOOP
v_msg_data := oe_msg_pub.get( p_msg_index => i, p_encoded => 'F');
dbms_output.put_line( i|| ') '|| v_msg_data);
END LOOP;
END IF;
END;
OUTPUT:
Starting of script
Starting of API
Completion of API
Order Header Updation Success : 251413
Thanks,
saran

Forgot to mention :Soruce is Oracle EBS

Why do application updates continually fail when using AAM

For more than a week I have tried to use AAM to update 17 applications in need of bug fixes. Of those 17 I have had success with only one application, Acrobat XI Pro. I have attempted with about half a dozen others and they all fail about midway through the download process.
I am ending my 1 year subscription period and I am seriously considering not renewing my subscription. Getting help is very difficult indeed.

UrSphere are you receiving any specific error messages when attempting to install the updates? If it is U44M1P7 then this simply means the update has failed. To locate the root cause of the failure you will want to review the installation logs for the update. This will allow you to locate the specific error which is preventing the updates from being applied successfully.
Please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error. The document also references how to locate and interpret the installation log files. Please feel free to post any specific errors you discover to this discussion.

Staroffice 9 to SO9 Update 1 process fails

Similar Messages

Maybe you are looking for