StarOffice8 On Red Hat Linux x_86_64 Won't Start

I've just purchased the upgrade to StarOffice8 and installed it on my Red Hat Linux (AMD-64). The installation finished without any errors at all. I checked and all files were installed. However, when I start any of the apps, nothing displays. I can see the processes with 'ps' command but nothing on screen. I've changed the monitor resolution as described in the README, nothing works. All other X-WIndows stuff works fine. I have a pretty standard video card, the Nvidia FX 5200 and Red Hat came with drivers for that adapter. Can anyone help with this?

Hi Mink,
Confirm you have 1.5 GB free in /tmp. If not you can point the installer to another location -- set the variables TEMP, TMP, TEMPDIR to that new directory if you need to.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

TD340 Red Hat Linux 6.4 during start up give Kernel Panic

I am a newbie and please forgive my newness
I recently bought a TD340 with 32GB Ram, OB SAS RAID 300.
While using the ThinkServer EasyStart up to configure the installation of Red Hat Linux 6.4. I am able to finish the installation successfull, however, after the installation is completed and and Linux 6.4 boots up, in the middle of the start up a I get the following message:
Kernel Panic - not syncing - attempted to kill
Pid: 1 comm: init not tainted 2.6.39-400.17.1
Call Trace:
and it nevers boots up sucessfully.
Any help would be appreciated.

It clearly mentions its bootstrap issue in Java stack. The bootstrap log files can be found in /usr/sap/<SID>/JC<XX>/work/ folder.
dev_bootstrap* ; log_bootstrap* ; jvm_bootstrap*.
In one of these files, it will be mentioned, synchronization exception...Database initialization failed.
90% of the issue is caused dude to Database not getting initilized or its not connected or userauthorizations missing or driver class secured in the Secure store is incorrect.
Troubleshooting J2EE Engine 6.40/7.0 Bootstrap Issues
SAP Note Number: 997510
Check this note, you will get all the answer!!
And award points if it helped.
-Subbu

How to Install Oracle on Red Hat Linux?

My System is having P4 1.8 GHz Processor with 128 MB RAM, 40 GB HDD(7 GB Linux Partition + 1 GB Swap Partition). I have installed Red Hat Linux 9(Server). Now, I want to install Oracle 9 on this syste. But I don't know how to install it. Anyone who knows this, plz, mail me the necessary system requirements alongwith some settings, if any. My Email ID is [email protected]/[email protected]

I think you'll have some problems with 128MB RAM.....<br><br>
:P Nonsense, but I do hope that hard drive is one of those new, fancy flash hard drives, otherwise the system will spend so much time swapping that it won't get past the installer.

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Does Red Hat Linux 4 OS will support in HP 3330 i5 Processor

Does Red Hat Linux 4 OS will support in HP 3330 Using i5 Processor , Kindly tell me that this PC will support this OS or not
This question was solved.
View Solution.

Hi,
Based on this, HP does not support, that won't stop you. You have to use other source to get all drivers for it.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to install ECC IDES in RED HAT linux version 5

Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan

> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus

Installation of EBS 11.5.9 on Red Hat Linux AS 4 fails

I am trying to install Oracle Applications 11.5.9 on Red Hat Linux AS 4. During pre-installation test , it is failing in two test viz. File Space Check and Writing Permissions....and saying insufficient privileges....I am trying to install with user root after creating two required users. What could be the problem?

do the follwong as root
chown ur_user:ur_grop /path where are u installing for both users and try again, the users you create must be the woner for the directroy u r installing under alos run
chmod 777 /path
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Error message while installing JDK on RED HAT - linux interprise 5

Hello!
I have got an error message while installing JDK on RED HAT - linux interprise 5:
[user@localhost Desktop]$ cd jdk-6u22-linux-i586-rpm.bin ./jdk-6u22-linux-i586-rpm.bin
bash: cd: jdk-6u22-linux-i586-rpm.bin: Not a directory
[user@localhost Desktop]$ ./jdk-6u22-linux-i586-rpm.bin
Unpacking...
Checksumming...
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-6u22-linux-i586.rpm
inflating: sun-javadb-common-10.5.3-0.2.i386.rpm
inflating: sun-javadb-core-10.5.3-0.2.i386.rpm
inflating: sun-javadb-client-10.5.3-0.2.i386.rpm
inflating: sun-javadb-demo-10.5.3-0.2.i386.rpm
inflating: sun-javadb-docs-10.5.3-0.2.i386.rpm
inflating: sun-javadb-javadoc-10.5.3-0.2.i386.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
Installing JavaDB
error: can't create transaction lock on /var/lib/rpm/__db.000
Done.
What is the problem?
Thanks!

Good point.
Moderator action: thread locked.

Error messages when trying to install Essbase 11.1.1.3 on Red Hat Linux 5.3

Hello,
I'm having an error message while trying to install EPM 11.1.1.3 on Red Hat Linux 5.3 (32-bit).
It happens when I click "Next" for the installation to begin:
Error: Linux File Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Error: Linux System Util Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Exception in thread "Thread-7" java.lang.NullPointerException
at com.ibm.wizard.platform.linux.utils.UnixShellInterface.shutDown(Unknown Source)
at com.ibm.wizard.platform.linux.LinuxFileServiceImpl.cleanup(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.close(Unknown Source)
at com.installshield.wizard.service.ServiceFactory.shutdownService(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServicesManager.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.Wizard.shutdownServices(Wizard.java:648)
at com.installshield.wizard.Wizard.exit(Wizard.java:583)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1848)
Many thanks for your help.
Best regards,
Andy

Hi John,
I get the error messages once I click on "Next" from the "Confirmation" window.
I've extracted:
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 commonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 essbaseAddins
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:20 essbase_administration_services_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 essbase_integration_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:16 essbaseProductCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:21 essbase_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_smartsearch_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_studio_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 productCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 tools
For the Essbase installation.
Thanks for your help.
Best regards,
Andy

Installing Oracle 8.1.5 in Red Hat Linux 6.2

Hi,
I'm trying to install Oracle 8.1.5 in Red Hat Linux 6.2. But when I run the runInstaller
command it gives the following error & quit.
[oracle@localhost cdrom]$ ./runInstaller
Initializing Java Virtual Machine from /usr/local/jre/bin/jre. Please wait...
Error in CreateOUIProcess(): -1
: Bad address
And I tried to run the Installer with jre1.1.6 & jre 1.1.7. Both producing the same
error.
You may think why I'm using the old version of Oracle. It's an urgent need for
me at the moment.
Hope someone could guide me in the correct path to install.
Thx in advance.
Luxman

You need to install java.
See http://jordan.fortwayne.com/oracle/

Oracle 8.1.5. on Red Hat Linux

I am installing Orcale 8.1.5 on Red Hat linux 7.0.When i am
running ./runInstaller i am getting the following error.
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad addres
As required
i have jre117_v3(downloaded from java.sun.com)
in my /usr/local directoty also i have
made soft link pointing to /usr/local/jre.
Can any one help me on this
Thanking all in advance

Hi.
Try this site:
http://free-zg.hinet.hr/denisk/index_en.html
I've used the instructions on it for 8.1.7 and 9.0.1 on various
RedHat versions. Not an exact answer to your problem but it
might help.
Good Luck.
Tim....

Problem installing Oracle 8.0.5 on Red Hat Linux 7.0

Hi,
Due to a software requirement, I have to install Oracle 8.0.5 on Red Hat Linux 7.0. (I know Oracle 8.0.5 is pretty old and so as RH Linux 7.0 but that is what required).
I downloaded the Oracle8051EE_Intel.tgz from Oracle and tried to installed it but it didn't work.
It crashed out when it tried to run some of the SQL script during the installation using SVRMGRL. Later on, we found out all the binaries under $ORACLE_HOME/bin were corrupted during the installation. We did a comparison of the size of SVRMGRL and SQLPLUS and they are different from the Stage (or the one from the .tgz).
Does anyone have this problem before? Will 8.0.5 works on Linux 7.0?
Thanks in advanced for any help.
Best regards,
William
null

I'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started.

Oracle 8.1.7 on Red Hat Linux on a Dell Poweredge

We have a Dell PowerEdge 6400 server with PERC 2/DC raid
controllers.
We have installed Red Hat Linux 6.2.
According to the installation guide in order to install Oracle
8.1.7 we need to recompile the Kernal to get to version 2.2.19-
6.2.7.
Recompiling the Kernal causes a failure in the Raid controllers.
I realise that this isn't strictly Oracle but I wondered if
anyone had met this problem before. It appears virtually
impossible to configure this combination to support Oracle.

Yes there is a lot of information out there. Oracle 8.1.6,
8.1.7, 9 on Linux 6, 7, 9.
Which glibc? binutils? compat-libs?
For 8.1.7 on Redhat 9
Please try: http://www3.sympatico.ca/arothmel/oracle/817.html
Still evolving. Feedback welcome :)

StarOffice8 On Red Hat Linux x_86_64 Won't Start

Similar Messages

Maybe you are looking for