Start a meetme conference from CUPC?

Hello all, I recently added presence to my environment, and we would like to abandon the soft phones in favor of CUPC because of the presence as well as video chat. My problem is that some of us need to be able to initiate a meetme conference (normally done with the softkeys on the hard phones and softphones).
Can any point me in the right direction? Is is possible to start a meetme conference from personal communicator?

Hi
As far as I'm aware it's not possible. CUPC doesn't have the 'softkey' to do this.
Now Jabber is out it seems less likely to appear in CUPC... and whether it will appear in Jabber?.. well... how would that sell Webex or MeetingPlace?
Probably best to submit a feature request.
Aaron

Similar Messages

Initiate MeetMe conference from a 3rd party phone

Hello all,
We have integrated a 3 party SIP phones with CCM 7.1.5. Only 3 party SIP phones and we need use conferences.
We must initiate the meetme conference from any of these phones. How can we do this?
How can we use the MeetMe Service URI : x-cisco-serviceuri-meetme in a 3 party SIP phones?
Regards,

Hi Wayne,
It appears that this option is not available natively for 3rd party SIP phones in CUCM yet. Meetme conference can only be initiated through the use of Meetme softkey or Programmable Line Keys (PLKs).
HTH
Manish

Start of web conference from oracle messenger window

Hi,
I want to setup Oracle web conference from oracle messenger. but not finding the solution.... please help to find to enable the oracle web conference from messenger.
Regards
Jayant

You can start an instant web conference. If by "setup" you mean "schedule", you cannot do that from the Messenger.

Start instance conference from integrating application

I am creating a ingrating web application that will allow users to start an instant conference. I have created a new site within RTC. The Integration Service documentation and the samples from my RTC install are not consistent about encoding the siteid and token. The docs show set a cookie that concatenates the siteid and authentication code with a ":" and then encode the value but he samples only show encoding the site's authentication token not the site id. could someone please clarify.

I got the instant conference working in 10g. Can you tell me why listUpcomingConferences fails..withyou are not having the right credentials..error
even if I pass in the right siteid and Token..I even passed the userid..and tried

UCCX playing prompt to meetme conference bridge

Hi,
I'm creating a script to be in front of a meetme conference bridge
1) collect meetme extension digits
2) recording caller name
3) if call redirect to meetme not successful: opening the conference by pushing xml to a utility IP Phone
4) then redirect caller to the conference
5) place a new call to meetme extension and play announcement + caller name to the new contact
All is working well except play the announce and caller name
No partition on extensions, same Region and Device-Pool. G711ulaw used
When placing the call to an Ip Phone the playing prompt and caller name works fine
Tried on my lab CUCM: 8.6.2.22900-9 / UCCX: 8.5.1.11003-32 in fact it does work fine only once for the first try after reboot all.
I tried it also on version 10 on dCloud: same issue
Conversations started on this item a few months or years ago I wonder if someone got it to work finally.
Any idea ?

Hi Alessio,
No you have to create an EndUser having device association on the Ip Phone
try this:
java.io.ByteArrayOutputStream baos = new java.io.ByteArrayOutputStream();
// ex: XML=%3CCiscoIPPhoneExecute%3E%3CExecuteItem%20URL%3D%22Key%3ASoft3%22/%3E%3C/CiscoIPPhoneExecute%3E
// ex: XML=<CiscoIPPhoneExecute>\n<ExecuteItem URL=\"Key:Soft3"\"/>\n</CiscoIPPhoneExecute>
String pushXml= xmlToucheMeetMe;
try {
java.net.URL url = new java.net.URL(phoneUrl); // http://10.5.0.202/CGI/Execute
java.net.HttpURLConnection urlCon = (java.net.HttpURLConnection) url.openConnection();
urlCon.setDoInput (true);
urlCon.setDoOutput (true);
urlCon.setUseCaches (false);
urlCon.setFixedLengthStreamingMode(pushXml.length());
urlCon.setRequestMethod("POST");
urlCon.setRequestProperty("Content-Type","text/xml;charset=UTF-8");
// Authentication: user: MeetMe pwd: MeetMe35 chiffré Base64
urlCon.setRequestProperty("Authorization","Basic TWVldE1lOk1lZXRNZTM1");
urlCon.setRequestProperty("Accept", "*/*");
java.io.DataOutputStream output = new java.io.DataOutputStream(urlCon.getOutputStream());
     output.writeBytes(pushXml);
     output.flush();
     output.close();
     java.io.DataInputStream input = new java.io.DataInputStream(urlCon.getInputStream());
     int bufSize = 4096; // buffer size, bytes
     byte[] bytesRead = new byte[bufSize];
     int bytesReadLength = 0;
     while(( bytesReadLength = input.read( bytesRead )) > 0 ) {
         baos.write(bytesRead,0,bytesReadLength);
     input.close();
     baos.close();
} catch (Exception e) {
    e.printStackTrace();
    return null;
return new String(baos.toByteArray());
If this help, please rate

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Start up and waking from sleep problems. early 2011 macbook pro i-7 2.0

Been having problems with my computer starting up and waking from sleep. If i shut the lid it wont wake up upon reopening the lid unless i hit the power button. After hitting the power button it will restart automatically and you hear the chime and the cdrom ejecting , once the gray screen pops up it restarts again this time you hear the cd rom making the ejecting sound twice then it will start up as normal. Once it finally starts up my date and time has been reset to jan 2008. Other times when i open the lid hit the power button it does nothing at all. Even holding the power button for multiple seconds to force shut down it does nothing. Only way to get it to start up at that power is if i connect the charging cable. I have tried reseting the smc multiple times with no results and pram(even though it doesnt have anything to do with start up problems just did it anyways). It all started i last time i updated not completely sure what all updates i got but im still running 10.7. It seems like a battery issue which would make sense since its nearly 3 years old and i use it extensivly. Last thing that just started recently after i go threw the whole mess of getting it to start up if i pick it up or nudge it the thing will just shut off out of no where. Almost like there is a short somewhere, cant really be sure if its linked with the waking up from sleep/start up problems but seems right up the same ally. Any suggestions to what could be wrong would be greatly apreciated. Im assuming my battery may be on its last leg but the thing still holds a charge and my battery life hasnt dimished at all so cant really be totally sure. Thanks agian

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. It may not fix the problem but it would be the first thing an Apple Store would do if you were to bring it to them with this complaint.
If bumping the Mac causes problems it's an intermittent internal connection that the SMC reset is not likely to help.
Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Error when starting a converted VM (from vmware server edition)

Hi, i am trying to start a converted VM from VMWARE SERVER. I think i have followed steps to import an VMWARE machine (using resources >> virtual machines images) and it does not return errors when converting VM but then, when trying to start it, it returns
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise e
I have also checked that there is enough memory.
This is the contect for vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/SIR_xxx/SIR_xxx.img,hda,w',
'file:/OVS/running_pool/SIR_consulnor/SIR_xxx (2).img,hdb,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '512'
name = 'SIR_xxx'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '1'
uuid = 'e23767cc-dc3d-0255-a7ac-65f111b589d7'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:71:AF:B1,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxx'
vncunused = 1
Thanks for your help

user559432 wrote:
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise eDo your servers have Hardware/Full Virtualization enabled? You can check on the console and ensure the console says that Hardware Virtualization is enabled. If not, check in your BIOS that the processor hardware virtualization is enabled. If you don't have an option, your PC may not have the Intel VT-x or AMD-v extensions required to support hardware virtualization.
You can check to see if your processor supports this extension by using:
Intel processor:
# cat /proc/cpuinfo | grep vmxAMD processor:
# cat /proc/cpuinfo | grep svmIf you see a result, it means the processor has that support. You still need to ensure that it is enabled in the BIOS.

Start webpage with applet from a Form gives an error.

Hi all,
In E-business suit I try to start a web page from payables-->invoices. I do this with the zoom button.
When I try to open a normal website it works fine. But when I open the site I want, with an applet on it, I get a fatal error and my explorer(IE) is closed!
The error is:
Runtime Error!
Program: C:\Program Files\Internet Explorer\IEXPLORE.EXE
This application has requested to terminate it in a unusual way. Please contact the application's support team for more information.
Has this something to do with the Oracle Jinitiator and the JVM the applet starts?
Thanks in advance.

Do one thing try to run... this on some other pc, do u face the same problem? It might due to clash of java runtime classes in oracle jinitiator and sun jdk which may utilised by the other custom applet.
Better use a wrapper jsp to forward to applet and check if it works fine.
--Mukul

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

I can't start windows 7 normally from Boot Camp

I can't start windows 7 normally from Boot Camp.
It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
Please advice if anything I should do before cleaning up my partition and reinstall Windows.

I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
Restore check points
Uninstall last update or driver
Clean the system of debris temp files, caches, registry errors, fonts and left overs
make sure you have 20% and 12GB free space or more
A hard shutdown can create more problems.

HT1414 i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back!

i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back as i did not want it to restore my old phone anyway! i also had my hone set up to the cloud and it didnt work! PLEASE SOMEONE HELP ME

Can you try to use another computer?
If this does not work, visit an Apple Store or an Authorized Apple Service Provider next to your place, and show them the phone, maybe they can restore it before you'll have to get it serviced.
Did you try to put it in recovery mode?
iOS: Unable to update or restore

How To Start Forms and Reports From Start Command

Hi All,
How to start Oracle Forms and Reports in Oracle8i My OS is Windows 2000.Please tell the procedure to get into forms and reports.
Otherwise we have to install other software for Forms and Reports.
Thanks
Sujan

Sujan,
what does the database have to do with starting Forms and Reports ? If you are on Wondows2000 then navigate to the \bin directory if the Oracle Home you installed Oracle9iDS to. Type ifbld90 for Forms and rwbuilder for Reports design environment.
If your ability to start Forms and Reports from the command line is your only exit criteria in evaluating software for a project , how far will you go with it?
Frank

Recently started not receiving texts from one person - AT&T user, also HTC One

I recently started not receiving texts from one person. He also has an HTC One (older model) but has AT&T as his provider. We were texting back and forth last Friday morning (11/8) and then he called me and ever since then I have not received a single text he has sent. He is receiving all of mine and we can receive phone calls back and forth, but his text messages are not coming through. We have both tried restarting our phones and I have also tried deleting him as a contact and recreating it however nothing works. I checked to make sure he was not blocked (which I knew wasn't the case since I could receive phone calls from him as well), and even tried turning the "block contact" on and back off. Any solutions would be greatly appreciated. Right now we are using work arounds with google-talk and facebook messenger but it's very frustrated for me to not receive any of the texts that his phone is saying I am receiving.
It had started sporadically over the past few weeks where I would miss a text from him every once in awhile, but now I am receiving nothing. He is the only one that I am having this issue with as I have texted back and forth with multiple others the past few days with no issues.
Thanks in advance for the help!

Hi! I'm also having the same problem. I have an iphone 5 & one person (who also has an iphone 5 but has AT&T as a provider). We had been able to send & receive phone calls & texts until mid-November. Now, we can both give & receive phone calls from each other and she receives my texts, however, I DON"T receive hers. In fact, if I'm in a group text message with her, I don't receive any of the texts that include her, even though I can give/receive texts individually from the others in the group message. The other two in the group message CAN receive both her texts & mine. This is so strange - I was left out of a whole thread of text messages & none of us knew it. They thought they were including me (nothing bounced back) & I didn't know I wasn't receiving them. Since her texting works with both of the others, I'm concluding the problem must be with my phone. Do I have an incorrect setting? I'm not sure what could have happened. PLEASE help!

Problem in Starting a GP Process from Webdynpro Code

Hi Experts
I have a problem in starting a GP Process from webdynpro code. I have imported the following used DCs in my Webdynpro DC
caf/eu/gp/api/wd
caf/eu/gp/api (external)
com.sap.security.api.sda
Once I deploy I get the following error. No Syntax, Build errors in the application.
java.lang.NoClassDefFoundError: com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager
I have used the following code to start the GP Process - getUserDetails Context is of type IUser
          //Starting GP Process
try {
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(
     wdContext.currentContextElement().getUserDetails());
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                    "00A897714C5A11DE8E33005056A260C3", userContext);
IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters());
IGPProcessInstance prInstance = rtm.startProcess(process,
                    "New User Registration Process",
                    "New User Registration Process",
                    wdContext.currentContextElement().getUserDetails(),
                    roles,
                    params,
                    wdContext.currentContextElement().getUserDetails());
} catch (Exception e) {
     e.printStackTrace();
Please do the needful EXPERTS.
FYI... SP17
Thank you
Best Regards
Ramamoorthy D

Hi Ram,
You have to add Library reference to your DC.
in the context menu of your DC select
properties->webdynproReferences->LibraryReference
add sap.com/cafeugp~api as refernce.
I hope this will solve your problem.
Regards,
Rajesh

Start a meetme conference from CUPC?

Similar Messages

Maybe you are looking for