Start a new scene at scene break doesnt work

I'm using iMovie HD and when I import footage, a new scene/clip doesn't start up. I've checked and unchecked the prefrence, quit iMovie and I still can't get a new clip to start from where I hit pause record on the camera.
Thanks

"..your saying set the date and time on the camera and the scene break will work.."
It will work for any new footage shot AFTER you've set the time and date, because the camcorder will then write a new time & date on every new scene.
However, that won't magically fix anything shot BEFORE the time and date were set. So it won't fix old footage, but it'll stop the problem from happening in future.

Similar Messages

What happens with IMESSAGE? since i got new ios 5.1 it doesnt work fine in my iphone 4 and change the sending o receiving from others to mail o cell phone constantly...

since i got the new ios 5.1 on my i4 imessage doesnt work with other iphones, for example, my boyfriend send me and imessage and i get it as it email address and when i try to send him one, it goes as text!!, i dont understand.... this has been happened from both of us actualizated iphone to ios 5.1 ... and it has been changed constantly....

And yes, the Samsung has no issues on it's end. It sends, receives all regular sms texts from any phones that aren't using iMessage. Sorry, I didn't see your reply.
To update, I also just phoned Apple this morning, there's not much they could do at all. My personal opinion is that the number that was recycled (when I got it changed just very recently for the Android) must have somehow previously been linked to an pre-existing Apple ID. There was nothing they could do. They had me do numerous things that unfortunately had no successful results.
They even had me unregister my product from the Apple website, again, no success.
He did, however, say that there is an update going through beta testing at the moment that should, more than likely, have a patch in it for this particularily known issue since it's been an issue for awhile. So within a couple of months when it's released, I'm hoping this will fix it. I'm keeping my fingers crossed until then.
Turning iMessage off is the temporary solution that works for me. So I'm happy enough for that. Anyone else who would want to text her, would have to do the same.

"When I open a link in a new tab, switch.." Doesnt work correctly

I'm using Firefox 28.0 (Waterfox build)
I've verified that:
- browser.tabs.loadInBackground: False
- browser.tabs.loadDivertedInBackground: True
- "When I open a link in a new tab, switch to it immediately" is enabled in the UI.
It seems only some websites actually switch to the new tab. Also, sometimes, this feature will stop working all together; requiring me to toggle the Firefox UI setting and/or restart firefox.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Got a new replaced IPOD adn it doesnt work at all

Ok so yesterday I got a new replaced Ipod cause my last one got messed up. First off I had a great deal of trouble trying to get my PC, to read the Ipod, I looked at a couple of topics and found a solution. I put it in disk mode and the computer finally recognized it. So i added a couple of songs , and last night the Ipod worked. This morning I go to connect it to add more songs and it the software said it needed to be updateted well it updated it and then it just turned off, now i cant get the Ipod to work for my life, I tried charging it, that doesnt even work because when i try to reset it, no apple icon come up. Nothing appears its like completely dead. I keep pressing the menu and select button but nothing, I tried to connect it again to the computer nothing. What can i do now?

By default mass storage in all in ones , cameras , phones (yes PHONES) are diasbled and only activate and are given a drive letter when the device is in use. so the OS keeps all of those devices as DISABLED UNTIL actual DATA is in the bus and only then they appear on your list of drives.
Itunes just trashes that security (seomehow) and enables ALL USB removabale storage even when not in use ( just plain bad programming)
once you install Itunes , you must go and disable all USB removable media , when the removable media is indeed needed (for example you do connect a camera to your PC , the camera's software will
1) enable the device
2) assign a drive letter
This was a week worth of experimentaion to figure this out.
I woder why the Apple stores refer to their techs as GENIOUSES !
Another BLATANT bug in ITunes. It tries to associate itself to all multimedia extensions even if you tell it NOT TO and you will get an error message saying you do not have enough rights to change the association. These are so namby pamby bugs you wonder who in **** QC this software !
Another "HINT"
After updating yur IPOD through Itunes SOME USB devices will no longer be recognized automatically upon connection to the bus ( like my SonyEricsson phone) so a cold reboot is in order !
Warm reboot doesnt do it ! - yet another 2 hurs of experiment to fix this !
but hey my newest IPOD is giving me 20 hours of play time !
So I am assuming that EVENTUALLY the Apple programmers will be more in tune with the Wintel community and all of this will go away - I just wish there were not so secretive about their code. **** ive written about 30 utilities for my SonyEriccson p900 phone. One actually serves me as a thermometer! (I stick the sonyericsson in my freezer and through BlueTooth I can see the temeperature dropping ! , jut a silly thing but it is fun. That is because SonyEricsson made available ALL their hooks and function calls to the public. I am sure theres a TON of goodies in the IPOD that can turn into a nice cottage industry for developers.! Like a way to INCREASE the VOLUME on Music Videos !
Or making the MENY button on the remote that comes with the docking bay WORK!
DELL XPS GEN 4 Windows XP Pro IPOD 60GB 5th GEN

Firefox (15) inserts a "Firefox HTML document" in Windows Explorer File New menu. It breaks my works patterns (Alt FWF stops working). Need to disable.

I often use the shortcut Alt FWF to create new directories on Windows.
When FF 15 is set as default it alters the File New menu from Windows Explorer.
It inserts a "Firefox HTML document" item.
This item seems to sabotage the above key combination. It intercepts the last F.
In addition I object to the naming which is plain wrong, for me.
I have deleted the registry key that inserts this thing. Unfortunately it re-appears.
I want to stop this behaviour.
How do I kill this. (Other than by making another browser the default.)

I'm not seeing that on Windows 7 (which I'm sure is no consolation to you).
Since Folder usually is the top item on the new items menu, can you use
<br>Alt+f w Enter
until someone comes up with <s>a better workaround</s> an actual solution?

Start New clip a scene break

I am importing HD footage into IMovie HD I have selected start new clip at scene break but all it does is import as one huge file and does not start a new clip at each scene break. I know the importing has to be done at 1/4 speed because of my older mac G4. Is this the reason it does not start a new clip at scene break? Is there another setting besides in preferences I need to adjust?
Any help would be appreciated.
Thanks

Hi
And there is no sceen-detection program in the Mac environment at all to my knowledge.
Rumour says that there is such a program on the PC-platform. But how this is done
and how many clips that a panoramic (panning) recording would split up into is
a bit of my curiosity.
No Not in iMovie
Not in FinalCut Express
Not in FinalCut Pro 6 (Studio 2 bundle)
Yours Bengt W

Win 7 HDD Recovery doesnt work on Satellite L750

Hello
I`ve got Toshiba Satellite L750 with preinstaled win 7.
I instaled upgrade to win 8 (from dvd).
After this I upgrade the system from MS site to Win 8.1.
The system doesnt work properly (DVD doesnt recognized) so I have to install previuos system.
First I upgrade my BIOS to the new one - 3.60.
After this I try to do win 7 reinstal from my HDD recovery (which is on the partition d).But it doesnt work - it was impossible to start recovery from bios menu (key F8 doesnt work, there was only possible to press F2 or F12).
So I have to install Win 8.0 from my dvd, and now I have it and it works. But this is only clear system without any addons like nero, ms office etc.
My question is how to reinstal win 7 from my hdd recovery which i still have on partition d ?
in bios the key F8 doesnt work.

>After this I try to do win 7 reinstal from my HDD recovery (which is on the partition d).But it doesnt work
>My question is how to reinstal win 7 from my hdd recovery which i still have on partition d ?
in bios the key F8 doesnt work.
The HDD recovery will not work AFTER you changed the system.
In such case to go back to the factory preinstalled system (Windows 7) you need to use the Toshiba recovery disk which could be created with the preinstalled software called Toshiba Recovery Media Creator.
In case you did not create such disk in the past you can order such disk here:
http://backupmedia.toshiba.eu/landing.aspx

Command Link with Datatable doesnt work

I had read the previosu posts stating that commandLink with the datatable will be corrected with the new version of Jsf- 1_1_01 .I installed the new version and the commandLink doesnt work inside a datatable still

try initialising the List attached to the dataTable
in the constructor or use an outputLink
-DevioutputLink is similar to <href in jsp.It cannot implement the actionListener and action parameters which a commandLink does. Using a constructor for initializing is fine but when i want it to implement certain method then it creates a problem.

I got myself a hp 15 nootbook pc but the audio doesnt work

i got my self a new hp notebook. the audio doesnt work. i tried updating my bios and installing windows update but i did not find my audio working. no sound comes from the speakers but when i plug in my my earphones the sound comes but it is very glitchy and not clear. i had this problem since windows 8. i never got a working audio on my notebook. the sound works perfectly when i connect in using hdmi. please hep me Product number: J9H22UA#ABA Serial number: 5CD4422R88

Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I came across you post about the sound, and wanted to assist you! Please review the following documents, as they may help to resolve the issue for you:HP Notebook PCs - No Sound from Speakers (Windows 10, 8)HP Products - Where Do I Find Windows 10 Drivers and Software for My Model? Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

I got myself a hp 15 notebook pc but the audio doesnt work

i got my self a new hp notebook. the audio doesnt work. i tried updating my bios and installing windows update but i did not find my audio working. no sound comes from the speakers but when i plug in my my earphones the sound comes but it is very glitchy and not clear. i had this problem since windows 8. i never got a working audio on my notebook. the sound works perfectly when i connect in using hdmi.
please hep me
Product number: J9H22UA#ABA
Serial number: [Personal Information Removed]

Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I came across you post about the sound, and wanted to assist you! Please review the following documents, as they may help to resolve the issue for you:HP Notebook PCs - No Sound from Speakers (Windows 10, 8)HP Products - Where Do I Find Windows 10 Drivers and Software for My Model? Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Where is the import option for "Start a new clip at each scene break" in iMovie 2013?

I am currently in the process of importing several mini-DV tapes via firewire into iMovie 2013. I have the most recent version of iMovie and am using a Sony Handycam to facilitate the transfer. The problem I am having is that when I hit import, iMovie splits what is supposed to be a single scene into multiple scenes ranging anywhere from a second to 5 minutes. I am left with several scene chunks that I cannot combine into one. I did a little research and found that iMovie is probably deinterlacing my scenes as it mistakes them for multiple scene breaks. In the older iMovie options, all I had to do was to go to "Preferences" -> "Import" -> then deselect "Start a new clip at each scene break". However, this option doesn't appear to be available in iMovie 2013. Is there a way I can force iMovie 2013 to import a single scene from my mini-DV camcorder without breaking it into multiple clips? Thanks!

1st : this is the wrong forum, this is iMovie for ipod/iphone and ipad ( iOS is the OSX mobile Operating System )
2nd : iMovie 11 is the current OSX version. iMovie 06 was the last of its kind, all newer, including iMovie 09 have complete new workflow, so functions of 06 are gone and have replaced with others.
Please go to the correct forum to find specific answers.

I can't add a scene, I don't know why. I have finished making a scene and I'm trying to start a new one but the option to insert a scene is not highlighted so I cannot carry on :( please help

I can't add a scene, I don't know why. I have finished making a scene and I'm trying to start a new one but the option to insert a scene is not highlighted so I cannot carry on please help

you can't use scenes in html5 projects.
that's also no significant limitation because there's never a situation (afaik) where you need to use scenes. they are strictly a convenience for designers.
i don't know any programmers that use scenes.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Moved out of the US, reluctant to start a new account

I've been an Adobe customer since there was an Adobe. I worked in a corporate art department in the States and we were all over Adobe products and services from the beginning.
I've since left that job and moved to the UK as a freelance. I just went to upgrade my Photoshop before the deadline...and the sign in won't let me change my country. I could start a new account, but I feel bad walking away from my old account and 20+ years of customer relationship.
Am I just being silly? I mean, I don't suppose they hand out gold stars, but I don't really want a whole new account and I'd at least like to use my same old email address (which hasn't changed). Is this something somebody behind the scenes can fix? If not, are there any complications that will arise from my upgraded products being registered to a different account than the original? Thanks for any help...

Many online storefronts will detect a customer's location by IP address, and will then place limits on the payment options (e.g. if you say you're in the USA you can't pay with a UK bank account). Software is subject to UK VAT, so buying it remotely from the US site and not subsequently paying the duty on 'import' is a crime.
Having said that, if someone is temporarily abroad but retains citizenship of their home nation (along with tax and bank accounts) they can declare the purchase domestically and buy using their US bank or credit card details, just as if they flew back home and walked into a store. A US customer who purchases software in the USA is perfectly entitled to use it anywhere in the world they happen to travel, but they can't directly-declare the purchase as an expense against their UK tax return as it was never 'imported'.

I am locked out of my computer (macbook air) I just got it back from the apple store and they reset it. I put in a new password, and now it doesnt let me log in anymore. Command R doesnt work, all i hear is a sound, but nothing happens.

I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.

What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements.

Start a new scene at scene break doesnt work

Similar Messages

Maybe you are looking for