'Start Button' in Livecycle Workspace Tracking

Dear all,
I ‘m developing a process for user to submit their application form. I expected that applicators are able to check / view their submitted form in “Tracking” section in workspace. However, I found that when the form in “Tracking” is open, there appears a button “Start” button in bottom bar. By pressing this button, user is allowed to submitted their form again. Does anyone know the method to remove/hidden this button?

It is an Out of the Box feature of LC. Why do you want to remove that?

Similar Messages

The select/start button is not working on my Vita?

as title, anybody face the problems???
actually, my vita (wifi) freezed last week, PS button blue light, cannot shut down.
after hold down power button, enter to Safe Mode, and done everything (restore, restart, rebuild, format m.card).
now, PS button alive, working, but select / start button still not working!!
HELP HELP HELP.......

Here Is the Solution see on pictures This Fault Is Caused With Shorted Right Top Button When This shows conductivity few ohm this interfere with the signal line on the pcb.to test it disconnect this button from the socket by lifting up the small lock on amphenol socket.measure the 2 tracks on the foil if its conductive.in most cases will be leave it disconnected turn on the psp vita with some games and test if the start button respond 99% it will be working ok.if yesthen turn off the unit disconnect the main battery to avoid shortage to the motherboard.peel gently off the top right button and replace with new oneiff you cannot get parts then separate the 2 foil and clean the ferrite pad's.cut a thin foil with 2 hole same size as the button conductive pad's this will create bigger gap between these conductive touch pad's and the foil. Warning !!! This guide is for advanced component level engineers not for beginners require esd protection.

Having trouble assigning "buttons" to mute certain tracks on&off

I can assign all the faders and trim knobs on my "Novation reMOTE sl61;" but i cant seem to assign any of the "buttons" on my device to map the sameway i can get the other knobs and faders to map on my device.
I want to make sure what I'm doing can even be done in Mainstage for one. What i have is a concert with 2 vocal tracks and a midi keyboard track. what im trying to do is i add a "button" parameter in the "workspace" section. and im trying to map that button to mute one of the vocal tracks on and off.
I have sucessfully mapped the button to mute the track on and off by using the mouse click in the workspace section. but the button on my device still wont map, which is what i need it to do.
What should i Do?

Yea it does, but this is when midi mapping gets a little confusing for me.
this is what im working with here. It says that the number is 40(#08lsb) and when i press it the numbers underneath the highlighted button say "40" and "0" underneath the "40" and the "0" changes to a "1" when i press it. but i still cant get the button to illumitate or trigger what i want it to.

Firefox 4 download. Since, Windows start button options changed. Should be browser agnostic, can you please tell me how to fix this? While I love Firefox, this has me livid! (1 irony, Firfox is no longer in my Start button menu.)

I first noticed an issue when looking for something normally located in the Accessories folder of MS programs. What I found upon clicking on "All Programs" was not the program file/folder tree I expected but rather a direct list of all files in the Program Files folder. I then went to open a new session of Firefox to research that issue and noticed my basic Start button options were also changed. Now, even focus for event-driven events is not working correctly. Again, while I love Firefox, this needs to be fixed immediately or I will be forced to uninstall the product just to function.

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

My screen continually freezes up. I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
You can read about restoring the software here.
iTunes: Restoring iOS software - Support - Apple
Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
You should read this first before you restore from either backup.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
This is a must read before you erase the iPad should you decide to go that route.
iOS: Understanding 'Erase All Content and Settings' - Support - Apple

How can I disable an add on of a second status bar or browsing bar at bottom of screen above the Start button? It pops up showing every site I visit.

There is status/info/browsing line of information showing every single site I use and changes with every site I visit. It isn't in a box, but it shows basically all my browsing. It is like the address bar, but it is at the bottom of the screen and the information shows right above the 'start' button. If you try to click on it, it moves to the right side and you can't right click on it to see if you can close it. It may be an add on, but I don't know how to get rid of it. It is like I have two status bars but this one isn't in a box, it just shows in a line at the bottom of the screen. It shows all browsing information, and it is very distracting when I'm using my computer.

You appear to be describing the status messages. The easiest way to hide them is to use the Status-4-Evar add-on. With it you can choose to not display any of the status messages, or display them in the add-ons bar or location bar instead.
https://addons.mozilla.org/firefox/addon/status-4-evar

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

A720: After Windows 8.1 upgrade, Start Button doesn't work.

After upgrading to Windows 8.1 on a Lenovo IdeaCentre A720, you cannot properly click the Start Button with a mouse. However, touching the screen works as expected.
If you put your mouse in the left-most corner of the screen, so the mouse is no longer visible, left-clicking switches between apps and right-clicking brings up the Start Button command menu.
You also cannot use the top-left corner of the screen to invoke the app-switching menu with a mouse. It never appears. However, swiping with a finger from the left-side of the screen works as expected.
It seems as though the screen is off alignment. It is preventing core features of the Windows 8 OS to be invoked with a mouse.
Please advise.

All,
Avast 2014 was introduced with many outstanding issues and your specific concern appears to be another one of many issues that the Avast team should have picked up before making Avast 2014 generally available. However, I can tell you that my Windows 8.1 Start Button does work properly and I can attest to the fact that their latest GA release (2014.9.0.2007) has fixed all the previous issues that were identified and posted at the Avast forums.
Also, since this latest version was first made available via a CNET download on 11/1/2013, it could just be that you missed that fix by just a few days. In any event, to ensure there are no conflicts when trying to update from v2006 to v2007, I would suggest the followiing:
Download aswclear and do a cleanuninstall:
http://www.avast.com/en-us/uninstall-utility
Then, download the latest Avast vesion here and see if your issue persists:
http://www.avast.com/index
If you still have an issue, you can use the Help> Support link to report your issue directly from within the Avast User Interface.
Good luck,
plsrepli

Win 8.1 Start button and Charms randomly stops working BUG (workaround)

To anyone experiencing this, it is a bug in Win 8.1 which I can replicate at will.
Reinstalling your system as suggested by MS engineers will not fix this.
To force the bug to appear:
1. Grab a desktop Icon (recycle bin, any shortcut) and move this up to the top left hand corner without letting go of the mouse button. Drop shortcut anywhere on desktop. Without an Icon the mouse pointer would initiate the recent apps.
2. To check that the first step has worked, try and invoke charms by moving mouse to top right hand corner. If Charms do not appear then the bug has been triggered.
3. Now move mouse over start button (no click), move away then back again. Now the start button is locked. If you unlock the taskbar you can move it to any other position (top, left or right) and the start button works. Move taskbar back to the
bottom and the start button still does not work. Only way to get it working again is to restart window explorer in task manager.
To avoid this happening all you need to do is disable recent apps corner.
1. Right click desktop.
2. Click Taskbar and Navigation
3. Click Navigation tab in the properties window
4. Uncheck "When I click the upper-left corner, switch between my recent tabs."
Now the bug cannot be triggered as above to make the start button stop working. You have to remove this feature which is pretty hopeless on a desktop anyway. Its better than restarting Window explorer every time.
I can replicate this on any desktop or laptop, fresh install or old. Not sure about any touch screen machines. I can also trigger this in VMPlayer\Virtual Box and the Modern IE VM images that MS provide.
Now the MS engineers can replicate this on their machines, and maybe if we are lucky they will FIX it!!!!
MS please acknowledge that this is a bug.
Maybe the issue is due to the windows button not being redrawn on the screen once triggered as it still works when taskbar is moved (graphic card drivers). Could not find anything use full in the system logs.
Just noticed also that the charms also breaks if you drag an Icon up to the right hand corner. Once triggered Charms stops working, start button is not affected with the above work around configured.
MS please read this and reply.

suspect it is local to your environment.
Others seeing the same symptom. Note that originally I was not using the
Top left hover for thumbnail feature and then also claimed not to see it.
Oh. And here is another factor that someone else is using as a workaround. A link to the first thread I was thinking of can be found in this one
https://social.technet.microsoft.com/Forums/ie/en-US/d4526a1c-f811-4b67-9e4f-8a2e8f301917/charms-bar-and-start-button-freezes?forum=w8itprogeneral#2a21ea9a-4924-4808-9c2f-c4a7c0de8223
Robert Aldwinckle

Windows 8.1 - Upgrade from 8, Start Button Does Not Work

I cannot find a fix for my 8.1 start button.
It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
I've also tried:
Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
dism /online /cleanup-image /restorehealth
Any ideas? I would prefer not to do a clean install. Thanks in advance.
HP Touchsmart 23 series
i5-3475S 2.90GHz
16GB RAM
1TB HDD

Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
And what is the kind of the account, Domain? Local? Or both?
This is local machine.
It still doesn’t work in a new account?
Same issue happens with a new account.
What happens if you use win + "X"?
Win + "X" works fine; displays options.
Regarding to the “doesn’t work, both for screen touch and mouse?
Left-click via the mouse does not work. Touch works fine.
Can you try to copy the WinX folder from a working PC to your PC for a test?
I do not have another Windows 8.1 machine available to me.

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

How can I get a stop/start button the multimedia flash player in Acrobat 9 pro

I have successfully embedded a flash movie in my pdf. It starts when I click on it but does not stop until I reloaded the pdf. Is there a way to add stop start buttons?

There is not currently a shortcut for this. That's a good feature request, though. You can submit feature requests here.

Adding comments to PDF in Adobe LiveCycle Workspace ES2

Is it possible to let Adobe LiveCycle Workspace ES2 users to add comments to a PDF document without having to download the document?
How?
I have been trying many different ways for the past several weeks, but couldn’t find a way.
I tried to bring the attachment into a document variable and then using it as the input document for an assign task operation, after reader extending (including online commenting) it in the process. Tried different kinds of PDFs, including documents created from Adobe Acrobat, Adobe LiveCycle designer, static forms, with or without input fields, etc. Nothing seems to work so far.
Any tips would be welcome.
Thanks.
Ali.

Hi $Nith$,
I tried the same procedure what you had explained here. But, I am unable to get the comments that entered while reviewing.
Here I am attaching my workflow.
Here I am entering comments in workspace for this document in reviewer stage. I want to send this comments along with document for next stage (Approval stage).
Thanking you in advance.

How do i make is so that the program is running already and then have a start button to execute?

I created a program to control a function generator. I want it so that the program is already running when i load it up, and then when i actually want it to run press a start button. I think you can just do a case structure for the start button... but how do i get it so that the program is running when you load it. so when you press the start button it starts. instead of having to press the start button, then press the run program button. thanks!

A few things about Run When Opened. Once this is set, if you need to edit the vi, it will start running when you open it. You then have to abort the vi to edit it. Some people like to make a backup copy that is not set to run when opened so they can edit it without the hassle of aborting. In your case, it is probably not worth it since your vi does nothing until the start button is pressed. But this is for future instances of run when opened. Also, if you want to edit, I think if you press and hold the shift key (or is it the control key) while opening the vi, it will not run when opened. Another method to get around the run when opened is to create a blank vi. In the block diagram, put your vi that is set to run when opened. Then you can double click on the vi and edit it without having it run when opened.
- tbob
Inventor of the WORM Global

'Start Button' in Livecycle Workspace Tracking

Similar Messages

Maybe you are looking for