Start BW process chain automatically after FPBW or FPCIBW is finished

Dear SAP Experts,
we would lilke to setup our process chains in BW, so they start automatically, after FI-CA mass activities (PFBW or FPCIBW) are finished in source system IS-U.
In fact, I know the process behind this, according to SAP note 135637, so
(1) Create an event in the BW system
(2) Create a function module in the BW system
(3) Create an ABAP/4 report in the R/3 System
As we have more process chains in BW, one for FI-CA open items, second for closed items, another one for sales statistics, I suppose there are different events in source system for every type of job as well, so when FPBW is finished, FPCIBW, when sales statistics processing is finished in source system etc..
My question is, which event is triggered after the job in IS-U (FPBW, FPCIBW) is finished?
Btw, I found implementation of function module FKJO_EVENT_1905, where I_ID LIKE DFK_JC_CNTR-ID was checked, but I don't know if this is for all jobs in source system, or only specific jobs..
Thanks and regards,
Peter

Hi, Carlo!
We were encountered the same problem in our project in the end of April. We wrote message to SAP, and still waiting when our customer provide access to supprot team for SAP system.

Similar Messages

Started same Process Chain automatically several times

Hi BW Experts,
could you help me, please?
I don't know, how I started the same Process Chain automatically again.
I have a following easily process chain as a example:
1. Start Process
2. DTP
3. DSO Acitvated
I have the idea to insert the process 4. "Abap program" to start the function module "RSPC_API_START_CHAIN" again. But their are any problems......
Have you another idea?
Thank you and regards.
Volker

Hi,
Are u sing the Direct DTP or the normal DTP's?
If u are using the normal DTP then u need change the process in ur PC..
Start Process
Infopackge load till PSA
DTP to load data to DSO
Activation of DSO
... U can also add the ABAP process as per requirement .. there wont be any issues in that..
thanks
Assign points if this helps

How repeat a process step in a process chain automatically after error?

Hello guys.
Have some method to repeat automatically a process in a process chain after a error occur ?
Now, we need to make a manual procedure for repeat the process... We need make it more "fast", one "auto repeat" when failing.

Hi Leo,
Auto repeat of a process chain is always not ad visible as in most of the cases we can see the job got finished in SM37 and even spool got generated but unfortunately it will fail if any of the data package is wrong.In these cases we can skip the process chain and make it continue.
I have written a blog on the same.please go through it.i feel for those scenarios it is good.
How to override a process block in the process chain and make it force complete ?
My personal advice is to go and check the job log before repeating any process as the job may fail for n no of cases.it is a complex challenge of adding all those errors tracked.
Regards,
Kannan

Schedule the Process Chain automatically in BW

Hi SDN Guru's,
I have an urgent requirement in BW. I want to run the Process Chain automatically in BW when the job for the deltas in R/3 are completed.
I know that in BW we can trigger the process chain by the background job only by giving the date and time or after the event and after the job.
But my requirement is the process chain should automatically be triggered in BW once the R/3 delta job is run and completed and the delta records are updated in RSA7.
Can any body please let me know how we can do this as this is the urgent requirement for me.
Please let me know how and where we need to write the code or make the settings for satisfying my requirement.
Thanks & Regards,
Vamshi Krishna.

HI Vamshi:
Take a look at note 409239.
Thanks for any points you choose to assign (points are the way of saying "thanks" in SDN)
Best Regards -
Ron Silberstein
SAP

Trigger a process chain(PC) after successfull completion of two other PCs

Hi All,
My requirement is to trigger a Process Chain only after successfull completion of two other process chain which are already scheduled to run at different times.
Please tell me how to achieve this into SAP-BW 3.5
Thanks
Jharna

Hi
It is very simple, I'm doing the same.
Insert Remote Process Chain at the end of the actual process chain and call the other process chain, here you need to give source , destination and process chain name in Remote process chain.
try it, it will work.
Thanks
Reddy

Unable to start the process chain

Hi ,
I am trying to start a process chain manually , but it gives me a message saying process has no predecesssor ?
what should be done to start the chain?

Did you copy processes from another chain? Sometimes when this happens, you end up copying all the processes.
First, remove the process chain from scheduling. In RSPC, at the top, select Process Chain --> Remove from Schedule. This will delete all the batch jobs for the process chain.
Next, move all the processes in the process chain with your mouse. Sometimes the maintenance will put one process on top of another so you cannot see them all. By moving all the processes, you may find the "unattached" process so you can remove it from the process chain.
Hope it helps..

Job failing after start of process chain

HI All
i have proces chain based on sm37 job....but the chain is stucking at the Start process of the Proces chian and the Start process is in yellow...
when i check the status of the job in sm37.. it is showing as cancelled and it is showing in Release status for the next day.
When i check the job log entries for the job, it is showing the below message:
Job started
Step001 started (program rsprocess, variant&00000, user id xxxxxx)
" Process ABAP, Variant Delete_SLA_sales_complete is not scheduled waiting for event RSPROCESS 4DYXXXXXXXXXXXXX "
job cancelled
How to solve the above issue...?

Hi,
Your process chain has been scheduled repeatedly by using Repeat Scheduling option in RSPC. Then the Start Variant will remain in yellow. You need to make the released job to scheduled by getting into Planning view.
Regards,
Suman
Edited by: Suman Chakravarthy on Dec 7, 2011 11:22 AM

Process chain automate trigger

Hi friends,
i have one process chain , it contains around 10 process types. in third process i got fail, for example ods activation failure, then i activated manually . but from next process onwards it should trigger automatically how it is? there is any function module programmme or no? if it is there what is that
thanks in advance
regards
manoj

Hi
IF activation of ODS fails,You need to do it manually..You won't get repeat option..
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=errors%20while%20running%20process%20chains&cat=sdn_all
Thanks
Teja

Process Chain error after Enpk1(7.01) upgrade - "Termination discovered"

Hello We have upgraded our BW from 7.0 to Enhpk1 (7.01) with latest stack.
After our upgrade I'm seeing our Process chain when a step errors out and there is a next step to continue with always link inspite of the error in prev step, but the Process chain does not continue and hangs and when checking the log it gives a prompt of "Termination discovered"
Gives a prompt something like this
"The analysis of chain ZP_MD_OTHER_CUST showed that process
ODSACTIVAT ZP_MD_OTHER_CUST_ACTV was terminated However the
occur) or a metachain Run 4KFMOYW9CGL10CGCQV2ZL691R could
not be ended due to the termination. It may be the case that
a metachain was not informed about the error Continue run
for chain ZP_MD_OTHER_CUST and any corresponding metachain?"
with yes or No prompt
So the chain hangs and does continue only after we enter Yes to the prompt.
We are in Q testing the upgrade this can be big issue when we dont our chain to hang for something that we want to continue always.
Opened a msg with SAP, they got back say its because of note 1398868 in the support pack, asked us to implement the manual update on RSADMIN and apply another note 1473491 - Chain not continued with termination and "ALWAYS" link.
But this has not fixed the issue, Have notified back to them and waiting.
If any of you have encountered this and resolved . pl let me know.
Thanks
Mayil

Since you just upgraded the source SAP system, it's likely that the delta queue doesn't exist for the data and has to be re-initialized. I'd suggest doing an Init w/o Data Transfer and do a Full Repair extraction to catch up on any missed data. From then on, you shouldn't have an issue with your Delta mode extraction from the source system.

Starting BPM process instance automatically

In our process we would like to read the Oracle staging table and start the instance(s). We want this to happen every hour or so automatically.
We looked into documentation for starting the instances. Looks like there are only two ways, one is through global creation activity, we don?t want to use this approach since it is manual trigger, the second one is API initiate. I couldn't find any documentation on this approch. Some one please point me to right document or suggest me better approach.
Thanks,

You can use Global Automatic activities. This kind of activities
tipically run when a time is timeframe is reached (for example, every
hour) or you can make them to be trigger by some event, like a JMS Message.
NMS Reddy wrote:
In our process we would like to read the Oracle staging table and start the instance(s). We want this to happen every hour or so automatically.
We looked into documentation for starting the instances. Looks like there are only two ways, one is through global creation activity, we don?t want to use this approach since it is manual trigger, the second one is API initiate. I couldn't find any documentation on this approch. Some one please point me to right document or suggest me better approach.
Thanks,

Reg:process chains could be started manually and automatically

Hi
Each process chain could be started manually and automatically
>If i want to start the process chain manually, how should i start and what are the settings shall i mark
>If i want to start the process chain automatically, is there any tool are there to start the process chain at that particular time
Plz clarify my doughts it is use full too me
Thanks & Regards
manikanta

Hello,
PC can be started both manually and automatically.
Every PC has a start variant, when you right click on the start variant and go in the edit option, select the option direct scheduling. Then in change selection, check the box immediate and keep the periodic job at the bottom unchecked.
Hit the tick, save on the other screen. And when back on the PC screen, from the menu option select the schedule option.
This will run the chain manually.
To run it automatically, follow the same procedure but instead of using immediate choose, data and time, provide date and time when you want to run, you can check periodic option if you want the chain to run daily, weekly or monthly.
Regards,
Shashank

Start a proces chain with event

How to start a process chain with "after event"??

i followed these steps
1. i created a event some "Ztest1" with sm62
after that i created a process chain start conditions(start varient) like after event i that i mentioned "ztest1"
after that i went to sm64
i triggered that event but my chain was not started????/
any sugg..... y it happened

Unable to see the new transported Process Chain

Hi all,
I just made change to one of existing Process Chain in Dev, and also created a new one. I transported from Dev to Q successfully, but couldn't find it anywhere in RSPC. For the Existing Process Chain, I saw the changes in Q, but the chain's name has not been changed. Do you know why?
Thanks!

If your transport system is not set up to activate the process chain automatically after importing, then your new process chain may have "New:" in the beginning of the description. And since the process chains are organized within each Application Componenet by description, it may not be in the place where you think it should.
You should also check your transport in Dev to insure you collected the new chain.

Process chain - After error ABAP - trigger a metachain start does not work.

Hi,
I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
Many Thanks,
L.

Hi,
the problem is not the ABAP Program.
I have the following situation:
A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
In the ABAP program in order to force the status red we have the following code:
MESSAGE e162(00) WITH 'Status' 'Red'.
Any idea?
Thanks,
Veronica

Process chains start after transporting

Hello friends,
since we've upgraded to NW7 we encounter the problem that process chains start automatically after transporting them from test system to productive system. This ist very unpleasant!
Does anybody encounter this problem too? Ist there a system settig, which disables the automatic start of process chains after transporting?
thnx in advance!

Hi,
Process chains execute when transport request imported :Note 1233327 - Correction: Scheduling of immediate start for transport
In order to stop Process Chains from being scheduled immediately upon import, insert the following into the RSADMIN table with ABAP program
SAP_RSADMIN_MAINTAIN:
Object = NO_TP_SCHEDULE_IMMEDIATE
Value = X
After this change is made to the RSADMIN table, you can import Process Chain transports where the Start process variant has it set to be scheduled immediately.
This entry can be modified in the future by the same ABAP program and just changing the value of Object to space.
rgds,

Start BW process chain automatically after FPBW or FPCIBW is finished

Similar Messages

Maybe you are looking for