Start Cycle in IP02 FOR QM

Dear Sir/Mam
I had created maintenace plan and now i want to change its start date,but when i m going to ip02 there no start date to be changed can u guide.
regards
kunal

Dear Kunal
Is the scheduling for the plan done or yet to be done. if it is yes to be done you can change it in plan as well as in IP01.
If in IP02 you are intending to change click on Restart and put the start date again
Regards
Gajesh

Similar Messages

  • COPA Assessment Cycle using KEU5 for multiple controlling areas

    Hello All,
    There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
    A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
    Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
    Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
    Regards,
    Soumya

    Hi Soumya,
    Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
    Pls find the following text from SAP Help...
    Parallel Processing of Cycles of an Allocation Type
    Use
    Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
    You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
    To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
    You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
    When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
    Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
    Srikanth Munnaluri

  • Mass Change of Start Cycle Date of Plans

    Hi All,
    Does any know of any standard Program or Transaction available for changing the Start Cycle date for Single Cycle Plans in Mass.
    Regards,
    Manish

    Hi Manish,
    Theres a standard T-Code available: MCH01.
    Please refer to [Changing Maintenance Plans With the Mass Maintenance Function|http://help.sap.com/saphelp_dimp50/helpdata/en/95/83833cb67a8955e10000000a114084/frameset.htm].
    Thanks,
    Amit.
    Edited by: Amit Saxena on Nov 5, 2008 2:27 PM

  • I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

    I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text  or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

    The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
    David

  • In Month View, showing start and stop times for appointments

    Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave

    I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.

  • After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other devices.  I haven't moved to ios7 yet.  Any ideas?

    After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other bluetooth devices.  I haven't moved to iOS7 yet.  Any ideas?

    What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
    And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

  • Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

    We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
    When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
    When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
    recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
    ErrorEventID : 4126
    In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
    Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
    is 1 and the SCOM alert is still active.
    The version is Exchange 2010 SP3 UR5
    Any clues???

    Hi,
    From your description, this issue only affect one mailbox datatabase.
    Please use the Update-MailboxDatabaseCopy command to check result.
    If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Unable to start admin server service for weblogic (startWebLogic.sh) Linux

    I installed ECM 11g on Linux 64-bit , installed weblogic 12
    so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
    I found solution to give full access permeation for the user , but it's still same issue
    and i am triyng to start services from the users how installed the Weblogic and ECM
    bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
    PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http://hostname:port/console *
    starting weblogic with Java version:
    java version "1.6.0_33"
    Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
    Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
    Starting WLS with line:
    /usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
    <Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
    <Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
    WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
    WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
    WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
    WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
    WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
    WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
    WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
    WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
    WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
    WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
    <Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
    <Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
    Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
    WARNING: Opening of file based keystore failed.
    <Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
    <Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:148)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
         at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         Truncated. see log file for complete stacktrace
    >
    <Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
    <Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
    <Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    bash-4.1$

    Looks to be a cert or keystore issue. How do you have that setup?

  • I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    Any numbers or other details on the mesages given?
    Did you try to connect in recovery mode again? iOS: Unable to update or restore
    In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    Hello, BAHannebaum.
    The article below should resolve any device not being recognized in iTunes issue that you are experiencing.  The most common issues are the Apple Mobile Device Support driver or iTunes is outdated.  Start with the first step and test the results after each step processed. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • Start Of Ramp-Up for SAP Portfolio and Project Management 5.0

    Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
    Starting with this new release, the application SAP Portfolio and Project Management 5.0
    replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
    Collaboration Projects (cProjects) application.
    Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
    of ramp-up is currently scheduled for 19th of October, 2010.
    Functional Innovations And New Features
    A detailed description of all new and/or enhanced functional innovations and features can
    be found in the Release Notes:
    [http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
      -> SAP Solutions
        -> Release Notes SAP Portfolio and Project Management
    There are some SAP Notes which are in general very important for SAP Portfolio and Project
    Management 5.0 and which also serve as central points of entry to find import information:
    SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104]      FAQs - SAP Portfolio and Project Management 5.0
    SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912]      PPM 5.0: Supported Browsers, Java versions, etc. 
    SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953]      PPM 5.0: Configuration Content
    SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778]      SAP Portfolio and Project Management 5.0: Restrictions
    Kind regards,
       Florian

    Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
    Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

  • I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

    I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

    Hi Ryan,
    I managed to find this reference specifically for restoring on Snow Leopard:
    If you are using Mac OS X Snow Leopard, start your computer from the installation disc. Then use the "Restore From Time Machine Backup" utility.
    Now that was copied from this more comprehensive reference:
    Mac Basics: Time Machine backs up your Mac
    You may also find this article helpful:
    http://pondini.org/TM/14.html
    Finally, I cannot see why Time Machine would leave out your playlists and ratings? Think about it. Why would Time Machine specifically copy everything BUT your playlists and ratings? Ryan, what are your options? I would have to ask you this: Are you certain that you properly did the sync? That is another/different forum altogether: Using iPhone /see subsection on Syncing.
    Either way...
    Best Regards,
    mm
    EDIT: For whatever reason I tried three times to edit out one of the redundent adjectives... either different or another which preceeds the word forum, but the advanced editor would (apparently NOT allow me to do so). I hope that it doesn't render without any adjective before the word forum.

  • Informix: Error while trying to set up start or end key for index read

    Hi all
    Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
    SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
    SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
    ...while accessing a table.
    The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
    Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
    Best regards
    JM

    Ulf Akerberg wrote:
    Hello
    I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
    I attach the stack trace from the exception, perhaps it will give someone an idea.
    Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
    If the application works when statement caching is turned off, then it implies a bug in the
    informix driver to do with re-using a prepared statement. Is the PreparedStatement used
    the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
    this statement is created with a given SQL string, are the parameters for that SQL always
    set the same way?
    thanks,
    Joe
    >
    2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
    SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
    SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
    SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
    java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
         at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
         at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
         at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
         at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
         at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
         at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
         at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
         at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
         at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
         at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
         at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
         at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
         at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
         at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
         at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
         at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
         at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
         at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
         at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
         at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
         at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
         at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
         at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
         at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Regards
    JM

  • Best way to start a new catalog for 2009 ?

    Hi,
    What's the best way to start a new catalog for the new year, with all the keywords and all the presets of the modules (without having to export all the folders) of previous catalog 2008 ?
    Thanks,
    Dominique

    Well there is a cost too in not being able to find all your images in a single step, and inconsistencies soon develop - eg a keyword is plural in one catalogue, singular in another. Speed or stability issues are not simply related to catalogue size, and I've seen decently-performing catalogues 50% bigger than yours (as well as slow ones of a few hundred images). Have you optimized the catalogue recently?
    But if you think it's a good idea to fragment control of your picture collection.... Presets will be carried over to a new catalogue as they belong to the machine (unless you have the save with catalogue preference turned on). Keywords can be moved via the Metadata > Export and Import Keywords command. If you have lots of collections and smart collections, then maybe make a copy of your existing catalogue and then remove all the items from it - making sure you don't trash them of course.
    John

  • Having trouble removing a student email account from the Windows Mail App because the school has started using office 365 for thier email which i dont have access to

    I was wondering if anybody has any ideas on how to remove a gmail account that was set up by a community college for use on their mail servers and then find out that after awhile they have locked you out because they have started using office 365 for their
    emails and you are left with a student email account that you have no idea how to delete because you have missied out on deleting it before they changed to a different email provider?
    Anybody with ideas please help because I don't know what to do

    Hi,
    Regarding to Windows Mail App, do you mean the Modern UI App in Windows 8.1? Do you mean that you want to remove the email account from Mial App? Generally, we can simply remove the account by the "Account" option in Mail App (Open Mail App, move
    the mouse the right chram bar, click Account, then click the mail account\Remove account), but if the email acocunt is tied with the Microsoft Account which is used on the pc, in that case, it is unavailable to remove the email account, you need to contact
    your college to disconnect the Microsoft Account.
    If I'm misunderstanding something, please free correct me.
    Regards
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for