Start Data Transfer Aborted Activity Error

We got an error in phase Start Data Transfer
Runtime Errors         CONNE_IMPORT_WRONG_COMP_LENG
Short text
    Error when attempting to IMPORT object "<LT_PORTION>".
This is from TDMS
--- Table TPMP: Access plan: 00004 Writing behavior: 1 ---
u0160t. obvest. DMC_RT_MSG051
What could be wrong?
Thank you,
Mirko

We got a solution from SAP
1. Execute the 'Force Redefination' activity for the related
conversion object (the one wich failed) via troubleshooter.
2. Re-execute the activity 'Start Data Selection'.
3. Re-execute the activity 'Start Data Transfer'.
Mirko

Similar Messages

  • Transfer Rules - Activation Error

    When I trying to activate Transfer Rules, I'm keeep getting an error as "Error in source system", I could not able to track down to this error.
    Anyhelp is greatly appreciated. We have R/3 4.6c and BI 7.0.
    Thanks in advance

    Hi,
    Are running on 7.0 ver or 3.5 of bi, in case ur on 3.5 chk weather your data source is replicated as 3.5 or 7.0, in case you are working on 7.0 , then replicating the data source itself activated the "Transformation rules" (if created already), Scaheduling the DTP will do the job of staging.
    Hope this will be expedite
    Thax & Regards
    Vaibhave Sharma

  • Data transfer schedule run error-object variable/with block variable no set

    I want to automate a Data Transfer Workbench routine.
    I created the appropriate xml file but when I run the .bat file I get the following error: "Object variable or with variable not set."
    I think that the problem resides in the xml file but there is no documentation for the xml syntax so it's impossible to correct it.
    thanks in advance

    Solved.
    The problem was in the .bat syntax.
    At the -s option the filename doesnt need quotation marks.

  • Data transfer with some errors on registers. (Novice question)

    Hi experts.
    First of all i wat to say that i'm realtively novice in BW.
    I have an ods object.  I have a transformation>Data Transfer Processes>Infopackage to load data to it.
    I execute this with a process chain.
    well the roblem is that some registers I get are erroeous. That's ok, i just want lo load the OK regs, but when this happens the sistem does't load any.
    I want to load only the good registers and be reported about the errors too.
    Can someone please give me some advice about this?? I think thje secret is in the error handling customizing on the DTP, and maybe create a error DTP and something in the infopackage.
    Any tip to me please?
    Thank you!!!

    Hi,
    you need to maintain some parameters in the update tab of  the dtp.
    a) set the error handling to update valid records, reporting possible (request green)
    b) enhance the no. of error records to the size of the data packet.
    c) create a error dtp
    Now all records without error will be updated, the request will be green and so available for reporting. The records with errors will go to the error stack and can be edited there. The records of the error stack will be updated thru a error dtp.
    regards
    Siggi

  • HI Masters, in go.bat file  sld data transfer tirigering showing error

    HI Masters,
                      In visula j2ee admin tool when i am giving correct host name, portno, user id - j2ee_admin  and correct password ( in http setting tab and also cim client generation settings tab  , cim clinet test failed and also triggering sld data transfer also failed.
    in browser  http://hostname:portano/sld, it hiome home page, but all technical systems and all options with adminstration tab also showing in active mode ( not enable).
    what is the problem . i can not understand . what should be the problems  and what are the ways to solve the problem.
    Please give reply in detail

    Sujana,
    Check this document and follow the steps and you would be good to go.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414&overridelayout=true
    Cheers!
    Sandeep Tudumu

  • Data element was activated (error in the dependencies)

    Hello Friends,
    We had released some TR yesterday to move to Quality and this was not moved successfully and in the TR logs I found the following message. Not sure what to do...request if some has encountered similar situation to give their feedback.
    We had similar problem 2 days ago with another TR failing for the same reasons for another Data element...both are mentioned below...
    We have adjusted the table in SE14 also but still the same. In development box we do not have any issues everything is active.
    We have also regenerated the table maintenance also.
    Following objects not activated/deleted or activated/deleted w. warning:
    Table YAR_CN_BS_ACT could not be activated
    (E- Nametab for table YAR_CN_BS_ACT cannot be generated )
    Data Element ZLINE was activated (error in the dependencies)
    Data Element ZZSERIAL was activated (error in the dependencies)
    Following objects not activated/deleted or activated/deleted w. warning:
    Table YAR_CN_GAAP_AREA could not be activated
    (E- Nametab for table YAR_CN_GAAP_AREA cannot be generated )
    Data Element ZZDES was activated (error in the dependencies)

    Ramesh,
    When you transport a custom object, you need to make available other dependent custom objects for that object in the target system, means that when you transport a custom table you need to take all custom domains, data elements also in the TR if they are not already existing in the target system.....
    Pls check that in your respective TRs, do you have data elements ZLINE, ZZSERIAL also....same for ZZDES...., Also include their domains if they are custom. Now, to remove this error, create a new TR and include all these custom data elements in it and transport to Quality. After that re-import your erroneous transports in Quality with help of basis.
    BR,
    Diwakar

  • Data transfer workbench, getting errors do a scheduled ODBC import

    i am trying to schedule and automated import using an ODBC connection, i have setup the connection on my PC and have run the transfer workbench manually using this connection and all is working ok.
    but i have saved this import to an .xml file so that i can schedule the import, but when running this i get the following 2 errors
    "Can not connect to ODBC data source" and "Can not get SQL handler"
    the data source is an oracle 11i database, and i say this works fine when running the import manually using the workbench.
    I have noticed that the .xml file does not have the oracle database password saved in it anywhere, i don't know if this is the problem or not
    any help would be appreciated.
    thanks
    dave

    I think u will get answered frm this link
    Re: DTW and ODBC Connections from Batch File
    also check this link
    DTW and ODBC Connections - Automated process
    Edited by: Jeyakanthan A on Aug 18, 2009 12:55 PM

  • Start date for successor activity same as finish date of predecessor.

    Have set the calendar correctly; i.e.: workdays, holidays set as well as the hours per day (8:00 AM to 5:00PM with one hour off for lunch) and all activities are using the same calendar. Have set all activities "% Complete Type" to physical because don't want duration as driver. Have never had this happen before and need some help.
    Thanks

    Hello,
    Try the following:
    1. Make sure that the Start Constraints (if any) are set to the beginning of the day, and the Finish Constraints (if any) are set to the end of the day.
    2. Go to Edit > User Preferences > Dates > Time, and choose "24 hour".
    3. Check the activities to see if any begin at 8:01AM.
    4. For the first activity in the project that starts at 8:01AM, change the start time to 8:00 AM.
    5. Go to Tools > Schedule, and check if the time of the Current Data Date is set to 00:00.
    6. Go to Edit > User Preferences > Dates > Time, and choose "Do not show time".
    Now run the schedule. This should solve the issue.
    Good luck!

  • Transfer rules activation error after upgrade to BI 7 - DB Connect

    Hello all,
    We just upgrade our BW system to BW 7. Since that, we now have error when we want to activate Transfer Rules. Here is the error message:
    Error generating a program
    Message No RSAR245
    Template: RSTMPL80
    Error code: 6
    Row 6
    Message: the data object "SY" has no component called "SUBE
    The strange thing is that the error occurs only to Transfer rules that are coming from a DB Connect source system (to all of them).
    We have kept the datasource in 3.5, we have not migrate them and would not like to do it if possible.
    Thanks for your help in advance.

    Hi Jérémie:
       Take a look at this thread, it might help you.
    "error Message no. RSAR245"
    Regards,
    Francisco MIlán.

  • Activation of Objects with Type Data Transfer Process

    Hi Experts,
    I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
    Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
    Activation of Objects with Type Data Transfer Process
        Internal Activation (Data Transfer Process )
             Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
                  Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
    I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
    *SAP_BW     700     SAPKW70014     *
    Your suggestion will be appreciated with maximum points
    Thanks

    Hello Experts,
    Could you'll please help me out with this ...I
    I deleted the DTP and created back again
    logged out of BW and logged back again
    Infact I found a SAP note 1086877 and i applied it ..but it still didint help
    Whie loading the Master Data from PSA to DTP ..it worked fine.
    While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
    Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
    Thanks

  • Problems with an activity start date

    Hello,
    I am havin some problems when i set up the start date for an activity, i set up the date to sy-datum  and i set no time for it and the activity stays in waiting status.
    I am doing this because at some point i might have to set the date to sy-datum + 1 for the activity to start.
    can anyone help me with this? it must be something really easy, but i am new to workflows.
    I tried setting no time for it to start and i also tried setting the application server time plus 1 minute.
    Thanks in advance for any help given,
    Best Regards,

    Which date type are you using "Requested Start", "Requested End",...?
    Using SY-DATUM will default it to current date. When there is no time, it should run immediately (this is the theory). I would not be surprised if it waits until midnight. What I would do is to check in the container of any instance of that task and see what is the value of the start date and time.
    Also, make sure all workflow background jobs are scheduled (transaction SWU3 first node).

  • Network Header Start Date is not accepted by the system

    Hi,
      When I try to create a Network and put the start date I get an error message-
    Date 01.01.2011 is later than the validity period of the factory calendar
    Message no. CO032
    Procedure
    Enter a date which lies within the validity period of the factory calendar.
    And this does not allow me to cfreate the network.
    But the same date is accepted by the system for WBS element and activities.So I doubt it has anything to do with the factory calendar.
    Please assist.
    Thanks and Regards

    Hi,
    The validity end-period has been maintained as 2011 for the calandar.
    One difference I noticed is that for activity and WBS element the calendar maintained is 01.While for network header we do not have any explicit factory calendar concept but I think the system derives the Factory Calendar from the assigned Plant.But even in the Plant the Factory Calendar maintained has the validity end-period as 2011.
    In the network header's Basic Start field when I hit F4,then all the 2011 dates show in Italics-like the non-working SAT and SUN days.
    Thanks and Regards

  • TDMS4HCM  - problem with Data Transfer

    Hello,
    When I am executing Start Data Transfer step system ends up with error - "Execution of program /1CADMC/OLC_000000000144318 failed, return code 2" or Z_PA0022_014: Function module "/1CADMC/OLO_000000000093370" notfound. For each table (f.ex. PA0000, PA0001, ..., or HRP1000, etc.) system generates such error message.
    I tried to change Write Behaviour (all available options) but it doesn't resolve the problem.
    Have you ever had such problem?
    Thanks,
    Jerzy

    Hi Harmeet,
    The system was installed on sender and receiver system and it was running. The problem appeared when basis team perform system copy from production to test environment. Client which was used for TDMS was deleted so basis had to recreate it. from that point I have the problem. No additional settings where done for TDMS on receiver system afterwards.
    In the receiver system we have installed add-ons: DMIS, DMIS_CONT and DMIS_HR (tdms and sender systems were not changed).
    Should we install something else on receiver syst.?
    Thanks,
    Jerzy

  • Increase of work processes for data transfer for specific tables

    Hi,
    We are using TDMS for transfer of around 1 month's data from our ECC Quality system to ECC test system. The test system was built using shell creation and the transfer started.
    We have allocated 13 batch processes in the central system and reciever system. There are currently two tables for which transfer is running. The transfer is completed for all other tables. But eventhough there are 13 processes available, there are only 3 processes allocated to one table and 2 processes allocated to another table for transfer.
    Since the time is dependent on the complete transfer of these two tables and since there are 8 free processes available, we would like to assign the remaining processes on these tables so that the transfer is faster.
    Please guide me if there is any way to change the same.
    Regards,
    Ragav

    Hi,
    Thanks to Sandeep and Pankaj for the replies.
    I've started data transfer in CRM landscape and in that i was able to define the read method, write method and change some technical settings for transfer.
    In the Technical settings for transfer option, i was able to increase the parallel transfer batch processes to be run in parallel.
    Regards,
    Ragav

  • My nokia n 95 data transfer problems

    hi guys i just got this n 95 a week ago and i am trying to transfer video files to my nokia phone
    but when i connect it to usb and select "data transfer mode"
    its giving me a message on my phone
    "USB data transfer mode activated. Mass memory may not be used during this time"
    and i am not able to save files to my phone
    when i save it its showivg me on my computer when i open "Removable disk D" drive my files are in phone like the vedeo file but when i disconnect the phone and go to my videos its empty
    i just dontknow what should i do should i return the phone or what
    please someone help me
    thanks

    Hi,
    maybe format of video files you've copied to the device memory are not readable by phone. Did you convert it using Nokia Video Manager (part of Nokia PC Suite) on 3gp or mp4.
    And if you connect phone with PC use PC Suite mode instead of the USB. You will have acces to all yours phone memories
    Cheers
    Message Edited by hieronim69 on 24-Jan-2009 03:39 PM
    N95 & N96 User

Maybe you are looking for