Start date early 2000 pls rd.

New Millennium Inc., a leading provider of IT Professionals to
hundreds of end clients throughout the United States and World, has the
following position available-
Duration: 1year
Looking for someone with strong experience doing Production testing of
medical equipment in a labview environment. Any C or C++ would be a
plus but is not a necessity. If the consultant has a combination of
LabView along with a Knowledge of the hardware, specifically Medical
Devices or equipment, they would work out well. This is all Production
Testing.
In order to be considered for this position, you must either be a US
Citizen, Green Card holder or have a valid H1b visa that is already
sponsored by a 3rd party- Thank you for taking the time to
review this
position- I look forward to hearing from you-
Best regards--
Rich Glacken
New Millennium Inc.
phone: 800-381-9507 ext.321
fax: 800-381-8708
[email protected]

Hi,
If you have a look at the error message:PLS-00306: wrong number or types of arguments in call to 'STAGING_REPORTS.DANGER_CARDS'you'll notice that the error is when calling the procedure. You should check the whole package and other ones too for calls of the DANGER_CARDS procedure.
Just issue:SELECT NAME, TEXT
FROM DBA_SOURCE
WHERE UPPER(TEXT) LIKE '%DANGER_CARDS%';and sort the result in order to check against the proc definition. You can also paste this query output here, or the whole package code, in order for us to diagnose it more precisely.
Regards,
Yoann.

Similar Messages

Early schedule start date, early schedule finish date

I want early schedule start date, early schedule finish date and project cost plan in my report. This is a PS requirement. In the standard cube (0PS_C02) I can find actual start date and actual finish date. Has anybody used early schedule start date and early schedule finish date in the reports? If yes then did you get it using standard cube/ODS or you went for enhancement?

HI,
He have to go for few tables in which u can find all the data.
Firstly u have to enhance the datasource .
First go to table AFKO here you insert AFUNR (Order Number) this table you will get AUFPL .
Then take AUFLP and go to AFVV table and insert AFUPL . you will get all the activites and all dates of each activity for example early start date ,early finish date, foirecost date etc.
Thanks and Regards
Dinesh

Hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

No, i do not have quickTime player.
I have tried to close dep off for iTunes but failed to do so as i got a msg that iTunes can't work without Dep in execution data prevention.

Early start & lates start date

Hi experts,
I want to change the early start & latest start date which are in grey mode of maintenance order operation direcly instead of changing the order basic start date .How can I do it? please through some clues.thanks

Hi,
Can you please try this.
1. IW32, go to Operations tab, Select Operation 10 (assuming you only have one operation)
2. Click the "Dates" button from the buttons at teh bottom
3. On the Restrictions tab, StartPoitn, Select "Must Start On", then specify the Date you want to start the work on the right
4. Save the Work Order
Regards,
Joey

Earlier date in finish date field than the forecast start date (in Proj def

Hi Experts
I have foreast start and forecast finish dates maintained in Project definition. N dates in WBS elements.
However I am able to maintain an earlier date (than forecast start date) in Finish Date field in PD.
I believe there should be a validation with dates.
Please provide clues.
Warm regards
ramSiva

Hi,
Please create a validation rule with all prerequisites, check and message .Assign it to the project profile. For the running project , open the project in CJ20N ,--> Edit -->Validation and select this validation for the system to respond appropriately.
Warm regards,
Srinivas Potluri

Schedule run issue: Late dates earlier than start/finish dates

Hi,
I am running into an issue with one of my contractors. When the contractor sends the xer file, all the critical late start dates are a day earlier than the start date i.e. if the start date is Mar 03, 2011 then the late start date is Mar 02, 2011. I am able to fix it at my end when I run the schedule but the contractor is not. Is there some feature in the global setting that the contractor has to fix in his end to resolve this issue? Any help or advice would be great.
Thanks.

Marc,
When Project was first released there were only two basic start field, Start and Actual Start (in addition of course to the Baseline Start field and a few others). With the release of Project 2010, a manual scheduling mode was introduced. That's when things
got a little more confusing. Instead of leaving the Start date as is, the Start field was converted to a text field and the old Start field was renamed as Scheduled Start. When in auto-schedule mode, both Start and Scheduled Start are exactly the same.
Now to answer your questions. To keep it simple, let's assume you are using auto-scheduling.
1. In order to keep the schedule dynamics intact, it is necessary to update the Start field to agree with what really happened, namely with the Actual Start date. If you do not enter anything into the Actual Start field, Project automatically assumes the
task started as scheduled, on the Start date.
2, Yes, Project does its scheduling based on the current plan which is represented by start, finish and other data. Once the project starts, that current plan must be updated so the actual date values come into play. As noted in the lead in paragraph, Scheduled
Start and Start are the same for auto-scheduled tasks.
3. Earned value is based on the actual values and the saved baseline data. The "point in time" you refer to is the timescaled data as of the status date.
Hopefully, this clear up at least some of your confusion.
John

ATP check reset start date to an earlier date (typically 5 days)

Any ATP check of assemblies and sub-assemblies causes the start dates to reset to an earlier date than required (typically 5 days)".
Any thoughts.
Charles

The above issue occurs every time an ATP check is done on assembly orders. The reset of start date to earlier date cause nerviousness in the production schedule and impacting all assemblies on which an ATP check has been made.
Any thoughts.....
Thanks,
Charles

Early Start and Early Finish Dates for Completed Activities?

I am using P6 release 7 and having a problem with Early Start and Early Finish Dates for completed activities. For example, for an activity "A" the actual start date is 10-Oct-2013 and actual finish date is 19-Oct-2013, and activity is 100% completed but somehow P6 showing me the Early Start Date 02-Nov-2013 and Early Finish Date 02-Nov-2013. To me early start and early finish dates should not really be a matter for completed activities but I like to know why and how P6 calculates early start and finish dates for completed activities. Please let me know if somebody has an answer.
Thanks
Bilal Qamar

Does this activity have a resource assigned? If so, check if the resource is closed (expended) otherwise it may continue to reflect future possible progress based on unused resources.

Early Start and Early Finish Dates

When I build a schedule I always build it to early start and early finish dates. When I go to update my project the items that are finished always return a blank in the early start and early finish dates. Is there a way to get the program to still show the dates that the activities started and finished on in the early start early finish columns? I would like to be able to use the early start and finish columns instead of having to add more columns to be able to look back and see the start and finish dates for an activity that has already been completed.
Thanks,
Ryan Cherry

Does this activity have a resource assigned? If so, check if the resource is closed (expended) otherwise it may continue to reflect future possible progress based on unused resources.

Basic finish date earlier than basic start date while backward scheduling

I am encountering an issue where in when I am selecting backward scheduling for a process order and I am entering the Basic finish date, afte which system is giving me a Basic startdate which is after the basic finish date.
For eg:- When i give the basic finish date as 08.12.2011, system is giving me basic start date as 09.12.2011
I have checked the recipe of the material. In the recipe one major flaw that i found out was that all the activity timings were maintained as 0. But when i created a similar scenario in the testing client, i am not getting the issue.
Please help.

Hi,
Check what is maintawined in number of days the start day is allowed to be in the past in scheduling parameters of the order type, in OPU3. If there is an opening float defined in schedule margin key of the order, and concerning this float backward scheduling finds a start date which falls into past, lead time scheduling will automatically switch to forward scheduling starting from today. 9.12.2011 could have been deducted this way. Also check the factory calendar if days upto 9.12.2011 are defined as working days.
Regards.

Warranty start date shows 2½ months too early

HP Stream 7 Tablet - 5709. Tablet received 1/24/15 and I registered it that day. When I go to my Warranty Check page and enter my serial number, it shows the warranty start date was November 05, 2014. When I wrote HP Support, my reply (CASE:edite case by moderator) states: "Support Case Manager is not available at this time for HP Stream 7 5709 Tablet.
I am confused. All I want is the correct start date for my tablet. Who can I contact to get this resolved? Thanks
This question was solved.
View Solution.

HI @BAGS7 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Download of incorrect start date using Open PS.

When project is downloaded from R/3 PS to MS Projects, and 'Download actuals' has been set in 'Object type' settings , incorrect start date gets downloaded everytime any project is downloaded.( In this case 30 Nov 99 ).
Have already checked the start date in Project definition in R/3 PS and also the Project information in MS Projects. The source of the incorrect start date remains unknown.

Hi Nidhi
In addition to my earlier reply, pl also check the following:
1. Time Settings
Microsoft Project only supports the following ISO time units: minutes, hours, days, weeks, and as of Microsoft Project 2000, months. If you use other time units in your SAP R/3 projects, you must define conversion factors.
2. .Dates
The project information in Microsoft Project is updated with the information in the project definition in SAP R/3. If the start date is not available in the SAP R/3 project definition, then the start date in Microsoft Project is the start date of the task that gets started first. If the finish date is not available in the SAP R/3 project definition, the finish date is the finish date of the task that gets completed last in Microsoft Project.
<b>If any task starts before the project start date, the project start date is pushed back to the start date of the task that begins first.</b>
<b>If any task ends after the project end date, the project end date is pushed forwards to the end date of the task that ends last.</b>
Reason for difference in dates could be above cited and hope this solve ur problem.
Enjoy SAP.....
Regards
Sudhakar
PS: Pl reward points for suitable answer

Call object was called with start date in the previous month

We have a single cycle maintenance plan for 30 days.
Shift Factor Late Compl.   : 100%
Tolerance                    : 10%
Shift Factor Early Compl. : 100%
Tolerance                    :    10%
Cycle modification factor:    1
Factory calendar            : NIL
Call horizon                    : 100%
Scheduling period          : 90 DAY
Scheduling indicator       : Time
Call no . 11 was a plan date of 14.08.2009 has completion date 14.08.2009. Schedule type/status has "scheduled complete".
Call no. 12 was called on 13.09.2009 which is in the past.
Can someone explain why the system called the order with a starting date in the previuos month , that is , 13.09.2009.
And how to rectify it to make it current date for the next call object?
Thanks,
Manohar

I checked the algorithm for call no. 12
Start of Cycle                07.08.2008
Last planned date         14.08.2009
Compl.Predecess           14.08.2009        Absolute shift                +   0 Da
Planned cycle/offset      +    30 Da          Relative shift            0 % =   0 Da
Shift                                 +     0 Da           erance value           0 % =   0 Da
Planned Dates Due   13.09.2009    Completed on
Last call on              15.10.2009    Called by               IP1020091015
Workorder generated has start date 13.09.2009.
Should we restart this plan , as the start dates in call object are at least 1 month old ?
Thanks,
Manohar

Subtype Validity Start date Check

Hi All,
For one of the infotype we created a new subtype with the validity in future date say 01102010.
Now if i go to infotype i am able to create the record for this new subtype with the start date as 01042010 which should not be allowed.
I checked the table V_T582A and also the time contraint for the infotype.
Time constraint for the infotype depends upon the subtype and in the subtype table it is mentioned as 2.
I know that we have the custom check for the infotype but is it possible through stadard settings
Pls guide me on this
Regards,
Umesh Chaudhari

Hi Umesh,
Though the subtype table for 0071 (Pension funds GB) is V_T591A; it also reads T5G30 to identify the schemes..
Table T5G30 in turn has got various Pension Schemes with Start Date/End Date.. If you Start Date and End Date of the Plan is in Future (01102010) and if you intend to maintain the new scheme (Subtype) from 01042010; an error is displayed..."Scheme XXX is unknown for this period; check pension table entries."
Kumarpal Jain.

Can Web Start call earlier installed versions on client machine?

Can Web Start invoke earlier installed versions of the
JRE on a client machine, without invoking a download?
I ask because I have tried to so, unsuccessfully,
using the versions attribute of the j2se element.
In the usenet thread 'Jar test, with 1.4 VM?',
Usenet Message ID:
[email protected]
http://groups.google.com/groups?selm=1170640609.025666.236030@s48g2000cws.googlegroups.com
(follow the Google link at the top, to the thread)
I was attempting to confirm that a Jar file I
was deploying, was 1.4 compatible.
The test failed, because despite that the (1)
user who attempted it had a working 1.4.2 install,
the JNLP file (which declared version='1.4'),
was prompting for a download. The user was
not prepared to do that, understandably -
that was exactly what I was trying to avoid
doing, myself.
Since then, I did further testing locally -
trying to get a 1.5 launch when my current
Java is 1.6 - I have a number of 1.5 versions.
No request for '1.5', '1.5.0_08' or '1.5*' worked
(OK - that last one was just a WAG*), every time
I was prompted for download (which also failed,
as an aside!).
What am I getting wrong?
Do I misunderstand the intent of the j2se element
finding earlier verions? Is it only versions that
were installed by web start?
Is my understanding of how to use the version
attribute, incorrect?
* Where are the detailed instructions on the
allowable forms of the version attribute?
Neither the spec. nor developers guide seem
to go into it in any detail. Some of the forms
I have seen around the forum were (AFAIR)..

version="1.4 1.5+"

version="1.4"

version="1.4.2_13+ 1.5+"FWIW - here is the JNLP I am currently using
for the test, it is 'live and public'..
<?xml version='1.0' encoding='UTF-8' ?>

<jnlp spec='1.0'
    codebase='http://www.athompson.info/family/'
    href='thompson-1.4.jnlp'>
<information>
    <title>Thompson Family Genealogy</title>
    <vendor>Andrew Thompson</vendor>
    <description kind='one-line'>
      The ancestors of William Robert Ramshaw Thompson
    </description>
    <offline-allowed />
    <shortcut online='false'>
      <desktop/>
    </shortcut>
</information>
<resources>
    <j2se
      version="1.4"
      href="http://java.sun.com/products/autodl/j2se" />
    <jar href='genj-applet.jar' main='true' />
</resources>
<applet-desc
    main-class='genj.applet.Applet'
    name='genealogy'
    codebase='./index.html'
    width='300'
    height='170'
    >
      <param name='GEDCOM' value='thompson.ged' />
      <param name='ZIP' value='thompson.zip' />
</applet-desc>
</jnlp>

Using your tips, I was able to find the 1.5
JRE's listed in the Java control panel
(of an XP Pro box) and see they had no
checkmark for 'enabled'.
After enabling 1.5.0_08, I was successfully
able to launch the application (OK - applet
really) using the 1.5.0_08 JRE.
Thanks.
As an aside, I had to specify '1.5.0_08'
exactly to get that JRE. This is fine for
local testing, but sometimes it is handy
to ask others to help test via the web,
and it would be nice if I could make it less
specific (e.g. '1.5', to get any installed
and enabled JRE that is a 1.5 variant)
Do I understand wrong? Should that work,
to specify '1.5' and get a '1.5.0_08' JRE that
is installed and enabled?

Start date early 2000 pls rd.

Similar Messages

Maybe you are looking for