Start Db with old file set

I have a complete copy of all database files (control, redo, dbf, undo, etc.) made because I need to add another array to the existing server as we were running out of space. But today, instead of adding the disks, I had to bring the database up for some hot fix testing, so my backup files are currently old. if I need to make another backup that will take 7-8 more hours.I do not care for the database activity after the backup.
What I wonder is if I can start the instance with these old files ignoring the activity that happen after that as I do not need the changes. If the files are complete set, the instance should not be aware that there was some activity going after that, or...? I'm afraid that I might be wrong.
Any ideas?
Thanks a lot for the help.
mj

Yes, the database was shut down gracefully and was down when the backups were made.I also did the check sums.
Sounds good - it'll save me a lot of time.
Thanks a lot, mj

Similar Messages

  • Drag and drop onto AIR to start AIR with a file

    Is it possible to drag a file onto an AIR application icon to START the application using that file?
    I'm aware that once the AIR app is open files can be dragged into it and it will also open the application when a file is dragged onto it (if the file type  associations have been set) though without any of that file being used, but I'd like to be able to open it directly with the file I drag onto the app. Some sort of InitialStateVariable or such?

    This doesn't seem to work on Snow Leopard. Is there any think I should check?
    UPDATE:
    Found out, lazy me!
    NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, onInvoke);

  • Imovie11 substituting new movie files with old files?

    Hi Bought new imac in dec 2010 with iMovie 9 and used to import movie files from Panasonic SD60 - no problem. Upgraded to iMovie 11 this week and now, imported files are being substituted for old files - the import thumbnails show correct file, but preview pic above is showing different images. Even stranger, it seems that iMovie is reading files which were never imported onto the new mac and have been deleted from SD card? Anybody got any suggestions?

    Update:
    I notice that in "Manage Sites", if I choose a new "Site", then I get all the nice friendly Advanced options (including whether or not to cache) that the first article described.  However, if I choose "FTP or RDS Server" (which all of my connections are), then I do not.  What I do get instead is a nice friendly pop-up informing me that "Server connections allow you to work directly on the server..." etc etc.  Why then if we're working "directly on the server" are we still getting issues with multiple instances of a single file existing?  One of the most common annoyances I'm running into is that I can open a file (which of course also opens dependent files), and then immediately go to save that file and receive a warning that the copy of one of the dependent files on the server has changed since my last 'get' operation, and that saving may blah blah blah.  Nevermind I JUST opened the file, directly after opening DW and Refreshing my FTP connection (and no one else is working on the site).  We've also seen where files and folders with a same name but different case will appear in the structure, which REALLY gives us some buggy grief.  If I have the file "css/mystyle1.css" on the server, but I open a file that links to "CSS/myStyle1.ss", it'll create that folder and file parallel to the actual folder and file, and any subsequent changes to the REAL file cannot be saved due to "a file already exists with that name" issue.  The obvious fix is to go through all my files and make sure my case structure is universal, but this bugginess is just absolute madness, and the synchronization thing today cost us some MAJOR changes to a file that has not been touched in over a week.

  • HT201303 OK SO I BOUGHT MY 7YEAR OLD DAUGHTERS AN IPOD TOUCH FOR THEIR BIRTHDAY AND THE SECOND THEY START PLAYING WITH THEM ONE SET A PASSWORD TO ENTER THE IPOD AND FORGOT THE PASSWORD. IT SAYS THAT THE IPOD IS ENABLED... HOW DO I FIX THIS PROBLEM? HELP

    I BOUGHT MY 7 YEAR OLD DAUGHTERS A IPOD TOUCH FOR THEIR BIRTHDAY, THE SECOND THEY BEGAN TO PLAY WITH THEM THEY BOTH SET PASSWORDS TO ENTER THE IPOD HOME PAGE, WELL ONE OF MY GIRLS FORGOT THEIR PASSWORD AND NOW IT SHOWS THAT THE IPOD IS ENABLED... HOW SHOULD I GO ABOUT THIS?

    You will need to restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting.  Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
    Also, please note that you posted in the iPhone forum.
    Regards.

  • I cannot find the Firefox Start page with the Sync Set Up Link

    I'm trying to get the Sync code on my android device in order to retrieve all my bookmarks from my main computer to the tablet pc. The directions on the Mozilla support site say to "Tap the Set up Firefox Sync button on the Firefox Start page." Well I cannot for the life of me find this button or the Firefox start page. Where could it possibly be? My tablet pc, when operating Firefox, does not bring up any such page with said button.

    Locked as duplicate of [https://support.mozilla.org/en-US/questions/986705 /questions/986705]. Please continue there. I replied to your question in that thread

  • PDF files keep coming with old file name not as current file name

    Hi,
    I have a problem when exporting InDesign docs to PDF with some documnets. If I change the name in the export dialog box, then every time I export this doc to PDF in the future this name keep coming, even when I change the name of the document or save it in a new name. This causes confusion, since sometimes the name is completely different from the InDesign file name. What can be done to tell InDesign to save the exported PDF file according to the current file name and don’t remember the old PDF file name?
    I was thinking of a script, is there a ready one to use?
    Thanks

    Thanks for the tips, very useful indeed.
    Though it is bit hard to have everyone in the studio follow them as a routine. I way I used to do this is to go to Save as command, with right mouse I choose copy the highlighted document name, then I choose cancel, then when I choose to export I'll paste the the name which is the current file name, this is good for me, but I wouldn't dream of having this as a routine for everyone in the studio.
    I was thinking it would be easy if I can find a script, since I don't know scripting, to do just that, i.e. have Indesign to copy the current filename of the document (whether by doing the same trick as I am doing or if there is a direct command to do that in the script), then the script will go to the export dialog box, paste that name, then I will go on with the normal export dialog box options.
    This script will be easier to have everybody in the studio to follow.
    Appreciate your help.
    Thanks

  • Upgrading from CS3 to CS5.  Issues with old file.

    I design a monthly publication, which is always started from a InDesign template.  This template was originally created in CS3 and all Incopy links were created using CS3 as well.
    We updated to CS5 today and now we are unable to log into those stories.  Here's the error message:
    "this story needs to be converted to "InCopy Document" format in order to edit it."
    Should I just unlink everything and create new InCopy Documents or is there a quick way to fix this?
    Thanks!

    I don't know, I think it's pretty quick.
    Open the file in CS3.
    Select all the stories in the Assignments panel (Shift-click to get them all). - 10 seconds
    Click the Unlink icon (trash can) at the bottom of the panel. - 1 second
    Close the file in CS3, doing a Save As w/another name if you want. - 5 seconds
    Open the CS3 file in CS5. Save it, or Save As. - 20-30 seconds (depends on how big)
    (Personally, at this point, even if I wasn't using InCopy, I would always export to IDML and then reopen it in ID CS5, saving the Untitled document with another name, since you're skipping a couple versions. But it's not necessary. If you do it, add another minute).
    Choose Edit > InCopy > Export All Stories, 10-20 seconds, depending on how many it has to export.
    The end. That's about 2 minutes, yes?
    AM

  • Delete old files

    Hello,
    In usual when I create scenarios with file (Inbound or outbound) I sand backup file to backup folder.
    I'm  looking for easy way to create scenarios or something else that clean the backup folders.
    I'm looking for process that clean the older files, for example I want to erase all the files that older then 3 month.
    Do you have any idea?
    Regards
    Elad

    Hello,
    I found a script for that:
    '* File:               fdel.vbs
    '* Created:               June-2006
    '* Version:               1.0
    '* Main Function: Check "DateCreated" of specific files and if difference between Now time
    '*                pass the Time limit and delete old files
    '* Usage:   WSCRIPT.EXE fmon.vbs [Path to Directory with old files] [Time limit in days]
    '* Example: WSCRIPT.EXE fmon.vbs C:\Windows\Temp 7
    Dim objExCmd, fso, Time_Out_Before_Action, Base_dir, filename1
    On error resume next
    Set WshShell = WScript.CreateObject( "WScript.Shell" )
    Set fso = CreateObject("Scripting.FileSystemObject")
    Set objArgs = Wscript.Arguments
    Const ForReading = 1, ForWriting = 2
    For  intI = 0 To Wscript.Arguments.Count - 1
    next
    Base_dir = Wscript.Arguments.item(I)
    Time_Out_Before_Action = Int(Wscript.Arguments.item(I+1))
    '**** Getting list of files *****
    'Set objExCmd = WshShell.Exec("cmd /c echo off"&Chr(38)&"for /f "&Chr(34)&"tokens=* delims=. "&Chr(34)&" %a in ('dir "&Chr(34)&Base_dir&Chr(34)&" /b') do echo %a")
    Set objExCmd = WshShell.Exec("cmd /c echo off"&Chr(38)&"dir "&Chr(34)&Base_dir&Chr(34)&" /b")
    Do until objExCmd.StdOut.AtEndOfStream
    filename1 = objExCmd.StdOut.ReadLine
    If DateDiff("d", fso.GetFile(Base_dir&"\"&filename1).DateCreated, Now) > Time_Out_Before_Action Then
    'MsgBox filename1&"; Diff="&DateDiff("d", fso.GetFile(Base_dir&"\"&filename1).DateCreated, Now)&"> time ="&Time_Out_Before_Action
    f = fso.DeleteFile(Base_dir&"\"&filename1,true)
    End If
    Loop
    Regards
    Elad

  • Sample editor display jumps to file begin on zoom with large files

    Hey - does anyone else have this problem:
    When I zoom in to the max possible zoom level in the sample editor in Logic (eg to edit single samples with the pencil), in any audio file longer than 12:41, the waveform display suddenly jumps to very beginning of the file.
    It happens using either the zoom-in key, zoom slider or zoom tool. It is somewhat infuriating because I have to guess when to stop pressing zoom-in to get as close as i can without triggering the jump. (If i go one zoom level too far, I have to go back, zoom out and re-find my place and try again.)
    I did some investigation and the bug in zoom behavior starts happening with audio files a little shy of 12 min 41 sec ( 12:40.871ms to be more exact).
    Here are the results in "length in samples" of a test audio file (AIFF 24-bit Stereo, 44100Hz):
    33554453 samples and greater => sample editor jumps to beginning when zoomed in to max
    33554432 - 33554452 samples => sample editor jumps to END of file when zoomed to max (bizarre, eh? a 20-sample window in which the bug works in the OPPOSITE direction!)
    33554431 samples and less => sample editor zoom is normal and zooms in perfectly to the proper location at max zoom.
    I also tested other things like trashing my logic prefs and starting from an empty song with nothing in it - none of which make any difference. This bug is present in Logic 8.0.2 on both my Macbook Pro with OS X 10.5.7 and my Powerbook G4 with 10.4.11
    Maybe time to report this to apple - can anyone corroborate by just continually pressing your zoom-in key with the cursor in the middle of an audio file longer than 12:41 and see if the display jumps to the beginning?
    Thanks!

    bump?

  • Adobe Illustrator crashes with large files

    when i open illustrator to view or edit a larger file i get
    once i hit ok, this is what i get
    this particular file is 588MB and it is an iAI file
    the computer im running this on is spec out to the following
    Win7 Ult 64bit
    I7-3770K cpu
    32 gb ram
    WD 500 GB Veloci Raptor
    samsung ssd 840 evo 120 gb scratch drive
    paging file set up as  min 33068 max 98304
    i tried with and with out extra scratch disk, with paging file set and with paging file set to system managed.
    i have uninstalled ai and re installed same response

    A 588 MB AI File? From where? CS5 is 32bit and expanding such a large file may simply go way beyond the measly 3GB you have in AI plus if it was generated in another program there may be al lsorts of otehr issues at play. This may be a hopeless cause and require you to at least instal lCS6 or CC 64bit as a trial...
    Mylenium

  • Start-mdbs-with-application does not work

    Hi,
    We have a cluster with two managed servers and a JMS server on a migratable target on WLS 10.3.2. We have some MDBs within an EAR module deployed on the cluster. When the managed servers are restarted, WLS produces the following warning:
    <The Message-Driven EJB: LogReceiver is unable to connect to the JMS destination: jms/loggingQueue. The Error was:
    javax.naming.NameNotFoundException: Unable to resolve 'jms.loggingQueue'. Resolved 'jms'; remaining name 'loggingQueue'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at weblogic.jms.common.CDS$2.run(CDS.java:222)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216)
    at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1295)
    at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1092)
    at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1324)
    at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:480)
    at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    We have configured a System module with a ConnectionFactory on a default targetting and a Queue deployed on the JMS Server. The jndi names for the ConnectionFactory and the Queue have been properly configured.
    Apparently, the container tries to bind the MDBs with their relative destination, but is unable to proceed due to the cluster jndi not having been loaded yet. According to the documentation, we could manage to avoid this early binding by specifying
    <wls:start-mdbs-with-application>true</wls:start-mdbs-with-application>
    in weblogic-application.xml. I tried (also using false, because the documentation is not that clear in this aspect), but without any result. Is there a reason why we cannot manage to have the mdbs connecting later with their destination?
    Also, we got a warning message in the deployment page, claming that the MDBs in the server that is not hosting the JMS server are not connected to their destination. They stuck on state "initializing". While, if we manually resume the connection, via console, the state turns to "Connected". Are these issues correlated somehow?
    Any help will be very much appreciated.
    Thanks in advance,
    - Francesco.

    Hi Francesco,
    From the link below (i.e. Oracle link for WLS-11g) it states that
    “Set to false to defer message processing until after WebLogic Server opens its listen port.”
    Search for: start-mdbs-with-application
    Link-1 http://download.oracle.com/docs/cd/E15523_01/web.1111/e15493/summary.htm
    *# Conclusion:*
    This means that “false” should have resolved your issue but it is not so this might be a bug. Similar bug was seen in WLS-9.2 version which was fixed in WLS-9.2 Mp-1 version check out the link below.
    Search for: CR293982 or CR299012
    Link-2 http://download.oracle.com/docs/cd/E13222_01/wls/docs92/issues/known_resolved.html
    However if it was fixed in WLS 9.2 Mp-1 then the same issue is most probably taken care in WLS 10.x.x version also.
    *# Suggestion:*
    - Try to set “start-mdbs-with-application” as “true” and check if that works for you.
    This is because if you read the “Link-1″ carefully it states that “With default setting of true”, however when you check the “Default” column it shows “false”. Hence cant say which one is default. It might be document bug as well. However you have tried it so you can skip this suggestion.
    *# How to solve this issue:*
    1) Create a simple test case to prove that “start-mdbs-with-application” when set as “false” does not work.
    2) Open a ticket with Oracle and provide all the details with the test case and let them do their job.
    Hope this information helps.
    Regards,
    Ravish Mody

  • ITunes starts up with empty library - library confirmed alright

    G'day all.
    I've got a dual boot Leopard/Windows XP setup on my Mac, and both iTunes' read from the same library on my Mac HD, with the Windows partition utilising MacDrive to see the files. This has worked fine for about 2 years now, but just recently my Windows iTunes has started up with no files. Shift-ing at startup and reselecting the library does nothing to fix it.
    The interesting part: booting into OS X and openeing iTunes shows that all the files are there! Any thoughts on why this has suddenly started to happen?
    Regards,
    Will T
    P.S. The iTunes versions are the same on both partitions: 10.1

    i was just pointing you in the right direction
    thanks for the star and ... happy computing !
    JGG

  • Cannot connect to database (10.2 XE) with old data files

    Hi,
    I was running my database for a while but a couple weeks back it started failing - as in I can no longer connect to it. I tried moving the datafiles (all files under \oraclexe\oradata\XE ) and reinstalling and that makes everything run again with the default database files but when stop the database and copy my old files back in and restart - presto I can no longer connect either by jdbc or by apex ( 127.0.0.1:8080/apex ). My css log file has this in it after I resttart the database and try to connect to apex:
    [  OCRUTL][3280]u_set_comp_error: Parameter was NULL
    [  OCRUTL][3280]u_set_ocr_error: Parameter was NULL
    2011-12-28 17:07:20.084: [  OCROSD][3280]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
    [  OCRUTL][3280]u_set_gbl_comp_error: Parameter was NULL
    [  OCRUTL][3280]u_set_gbl_comp_error: Parameter was NULL
    2011-12-28 17:07:20.084: [  OCRRAW][3280]proprinit: Could not open raw device
    2011-12-28 17:07:20.084: [ default][3280]a_init:7!: Backend init unsuccessful : [33]
    [  OCRUTL][3280]u_set_ocr_error: Parameter was NULL
    2011-12-28 17:07:20.084: [ CSSCLNT][3280]clsssinit: error(33 ) in OCR initialization
    So, how can I rescue my data or fix what I assume is a corrupted datafile? I had a backup on dvd but now I can't find the dvd so I'm stuck.
    Edited by: user4272861 on Dec 28, 2011 2:09 PM

    Hi,
    Thanks for the replys,
    My instance is running in the exact place as before.
    When I try to run the commands in the trc file I get up to a point but then get errors.
    The following commands seem to work:
    STARTUP NOMOUNT
    CREATE CONTROLFILE REUSE DATABASE "XE" RESETLOGS NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
    LOGFILE
    GROUP 1 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_4WK0TDM0_.LOG' SIZE 50M,
    GROUP 2 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_4WK0TL5T_.LOG' SIZE 50M
    -- STANDBY LOGFILE
    DATAFILE
    'E:\ORACLEXE\ORADATA\XE\SYSTEM.DBF',
    'E:\ORACLEXE\ORADATA\XE\UNDO.DBF',
    'E:\ORACLEXE\ORADATA\XE\SYSAUX.DBF',
    'E:\ORACLEXE\ORADATA\XE\USERS.DBF'
    CHARACTER SET AL32UTF8
    -- Configure RMAN configuration record 1
    VARIABLE RECNO NUMBER;
    EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('RETENTION POLICY','TO REDUNDANCY 2');
    -- Configure RMAN configuration record 2
    VARIABLE RECNO NUMBER;
    EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CONTROLFILE AUTOBACKUP','OFF');
    work but I can't get past it...
    -- Commands to re-create incarnation table
    -- Below log names MUST be changed to existing filenames on
    -- disk. Any one log file from each branch can be used to
    -- re-create incarnation records.
    -- ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_1_start.ARC';
    -- ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_1_%U_.ARC';
    -- ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_1_%U_.ARC';
    -- Recovery is required if any of the datafiles are restored backups,
    -- or if the last shutdown was not normal or immediate.
    eg the command : RECOVER DATABASE USING BACKUP CONTROLFILE
    produces this:
    SQL> RECOVER DATABASE USING BACKUP CONTROLFILE ;
    ORA-00279: change 38947104 generated at 12/26/2011 01:56:02 needed for thread 1
    ORA-00289: suggestion :
    E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_765_
    %U_.ARC
    ORA-00280: change 38947104 for thread 1 is in sequence #765
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    SQL> RECOVER DATABASE USING BACKUP CONTROLFILE ;
    ORA-00279: change 38947104 generated at 12/26/2011 01:56:02 needed for thread 1
    ORA-00289: suggestion :
    E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_765_
    %U_.ARC
    ORA-00280: change 38947104 for thread 1 is in sequence #765
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    ORA-00308: cannot open archived log
    'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_765
    _%U_.ARC'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    and the command ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_12_29\O1_MF_1_1_start.ARC';
    produces this:
    SQL> ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA
    \XE\ARCHIVELOG\2011_12_29\O1_MF_1_1_start.ARC';
    ALTER DATABASE REGISTER LOGFILE 'E:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\A
    RCHIVELOG\2011_12_29\O1_MF_1_1_start.ARC'
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level
    What is the trick to getting it to open an archived log?

  • Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

    Verizon Media Manager will not start automatically with Windows, even though it is set to do so.  This started with the latest update.  I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
    One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
    I don't remember what the previous version was, but this one is 9.4.86.  It asked me if I wanted to update it a few days ago, and I said yes.
    I am running Windows 7 Home Premium.
    Solved!
    Go to Solution.

    Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
    Attached is a partial screen shot of my msconfig setting.
    Attachments:
    media manager startup cmd line.jpg ‏18 KB

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Maybe you are looking for