"Start Deletion of Data in Receiver System" does not start

I faced the problem tha data deletion in Receiver system is not started in TDTIM synario.
I started the activity "Start Deletion of Data in Receiver System" , the job "CNV_TDMS_09_RESTART_JOBS" is aborted till the job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over in Receiver System.
The error message is "No log was created for object CAGTFBS and sub-objekt SLOMBT".
After The job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over, the job "CNV_TDMS_09_RESTART_JOBS" is finished normaly but the no deletion job is released.
I carried out some deletion job by manual operation but other deletion job is not released.
Does Anyone knows the solution of this problem ?
Version:TDMS3.0 SP17
Basis: 700
Susumu

Hi Joerg,
Thank you for your reply.
> Please check the syslog for any reference to bad defined batch jobs! (all on receiver)
Syslog is nothing in receiver system.
> Is there any deletion job that can not be startet manually on the receiver side?
> (So normally on top of the list of scheduled deletion jobs.
I think all deletion job can be started manually.
Nomally, some deletion job is finished, the job is released next deletion job but no deletion jobs is released.
In addition, If rerun job "CNV_TDMS_09_RESTART_JOBS" is finished, no deletion jobs is released.
Best regards,
Susumu

Similar Messages

Start Deletion of Data in Receiver System

Hi,
I've executed the phase "Start Deletion of Data in Receiver System". The jobs in the target system are stopped, and If I try to restart from the central system I receive the message "Activity 'Start Deletion of Data in Receiver System' is already scheduled". I've verified that I've enough free batch process in the target system.
In target system the jobs "CNV_MBT_CNV_TDMS_09_START_JOBS" and "
CNV_TDMS_09_RESTART_JOBS" are cancelled, and I've a lot "TD09P*****" jobs in scheduled status.
How can I do to restart the process ?
Thank's in advanced

Log job CNV_TDMS_09_RESTART_JOBS :
Job started
Step 001 started (program CNV_TDMS_09_RESTART_JOBS, variant &0000000000000, user ID TDMS_USER)
Enqueue on local entry package 90007, phase TDBAS_PHASE_DATA_TRANSFER, activity TD09P_START_JOBS not set
Job cancelled
Log job CNV_MBT_CNV_TDMS_09_START_JOBS :
Job started
Step 001 started (program CNV_TDMS_09_START_JOBS, variant &0000000000001, user ID TDMS_USER)
Internal RFC error in status management: package 90007, phase TDBAS_PHASE_DATA_TRANSFER, acty TD09P_START_JOBS
Job cancelled

I cannot stop the activity "Start Deletion of Data in Receiver System"

Hi all
I tried to stop the activity "Start Deletion of Data in Receiver System" in my MDC package with the troubleshooting assistant. Unfortunately I get the following error:
No destination exists for the PACKID:
Message no. CNV_MBT042
Have you got an idea, what the problem is? Or how I can stop in a propre different way the activity?
Thanks a lot for your help
Roger

Hi Roger,
why do you want to stop this phase ?
Anyway : you can stop the process and than the phase can be restarted at a later stage.
Regards,
Eddy

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

(10.1.3.0.4) Help System does not start

For some reason my help system does not start when selecting from the menu. "Table of contents" or "index" options do nothing. It use to work fine. Conext sensitive help works okay by pressing F1.
Any ideas?

Hi paulfrench, check your documentation settings
Menu Tools -> Preferences -> Documentation
Make sure you have checked all of them.
Luis R.

System does not allow to enter data into cube

Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
Alex

I guess your cube is not transactional. Try to switch it to transactional

Dispatcher process on ABAP + JAVA system does not start.

Hi all,
Dispatcher process on ABAP + JAVA system does not start.
Can someone help me to solve this issue in a ABAP+JAVA stack system?
service p4 ================= ERROR =================
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
[Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
Nov 9, 2011 6:41:09 AM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
service p4 failed. J2EE Engine cannot be started.
Please let me know if you need any further information in this regard.
with regards,
Raja

Hi,
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
Please reboot the server to free up occupied ports. Later start the sap system.
Regards,
Deepak kori

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

Apple wanted to charge me 50 bucks jsut to talk to someone!
I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
Can you get to an AppleStore Genius Bar?
They may be able to fix this for you. No charge.
I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

V210 alom starts up; status is alright but system does not boot

I have a series of v210s, all running solaris 9.
After a power down on of the systems powers on alright. showenvironemnt
shows
r4n8mgt> showenvironment
=============== Environmental Status ===============
System Temperatures (Temperatures in Celsius):
Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
MB.P0.T_CORE OK 51 -- -- -- 110 115 118
MB.P1.T_CORE OK 60 -- -- -- 110 115 118
MB.T_ENC OK 15 -6 -3 5 40 48 51
Front Status Panel:
Keyswitch position: NORMAL
System Indicator Status:
MB.LOCATE MB.SERVICE MB.ACT
OFF OFF OFF
System Disks:
Disk Status Service OK2RM
HDD0 OK OFF OFF
HDD1 OK OFF OFF
Fans (Speeds Revolution Per Minute):
Sensor Status Speed Warn Low
F0.RS OK 7336 -- 1000
F1.RS OK 7180 -- 1000
F2.RS OK 7180 -- 1000
F3.RS OK 7336 -- 1000
MB.P0.F0.RS OK 17307 2000 2000
MB.P0.F1.RS OK 17763 2000 2000
MB.P1.F0.RS OK 17307 2000 2000
MB.P1.F1.RS OK 17307 2000 2000
Voltage sensors (in Volts):
Sensor Status Voltage LowSoft LowWarn HighWarn HighSoft
MB.P0.V_CORE OK 1.44 -- 1.26 1.54 --
MB.P1.V_CORE OK 1.50 -- 1.26 1.54 --
MB.V_VTT OK 1.28 -- 1.17 1.43 --
MB.V_GBE_+2V5 OK 2.50 -- 2.25 2.75 --
MB.V_GBE_CORE OK 1.20 -- 1.08 1.32 --
MB.V_VCCTM OK 2.55 -- 2.25 2.75 --
MB.V_+2V5 OK 2.58 -- 2.34 2.86 --
MB.V_+1V5 OK 1.51 -- 1.35 1.65 --
MB.BAT.V_BAT OK 2.90 -- 2.70 -- --
Power Supply Indicators:
Supply Active Service OK-to-Remove
PS0 ON OFF OFF
Power Supplies:
Supply Status Underspeed Overtemp Overvolt Undervolt Overcurrent
PS0 OK OFF OFF OFF OFF OFF
Current sensors:
Sensor Status
MB.FF_SCSI OK
r4n8mgt>
However the system does not boot, or show any diiagnositics.
I connected a serial to the "serial management port" but all i get is
C Alert: SC System booted.
SC Alert: Host System has Reset
[SC Status 7fff - OK] Enter #. to return to ALOM.
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Sun(tm) Advanced Lights Out Manager 1.5.2 (m1104)
Please login: admin
Please Enter password: ********
r4n8mgt> console -f
Enter #. to return to ALOM.
Here it sits and does nothing.
Any idea?
Lydia

That sounds like a failed logic board or display module on the logic board...either way you need to take it to an Apple store genius bar and have the techs test it to see exactly what has failed. The testing is free so give the techs a chance at diagnosing the problem.

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

System does not boot during Hyper V installation

Hi -
I was trying to install Hyper V on my Windows 8.1 professional edition, 64 bit OS. The installation was through ISO downloaded through MSDN. During installation I had to hard boot my system through switch off. Now my system does not boot correctly and during
boot it flashes a message "The last windows installation did not complete please install the setup". Does this mean that my existing 8.1 OS has crashed ? how can i come out of this and recover my data ?
My hardware configuration is :
i7 processor, 16GB RAM, intel graphics Card, windows 8.1 professional 64 bit OS.

Hi RahuIM,
You can try to enter safe mode then copy your personal data to the data volume then reinstall the system.
The related KB:
Start your computer in safe mode
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
Step-By-Step: Enabling Hyper-V for use on Windows 8.1
http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-windows-8-1.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Start Deletion of Data in Receiver System" does not start

Similar Messages

Maybe you are looking for