Start Deletion of Data in Receiver System

Hi,
I've executed the phase "Start Deletion of Data in Receiver System". The jobs in the target system are stopped, and If I try to restart from the central system I receive the message "Activity 'Start Deletion of Data in Receiver System' is already scheduled". I've verified that I've enough free batch process in the target system.
In target system the jobs "CNV_MBT_CNV_TDMS_09_START_JOBS" and "
CNV_TDMS_09_RESTART_JOBS" are cancelled, and I've a lot "TD09P*****" jobs in scheduled status.
How can I do to restart the process ?
Thank's in advanced

Log job CNV_TDMS_09_RESTART_JOBS :
Job started
Step 001 started (program CNV_TDMS_09_RESTART_JOBS, variant &0000000000000, user ID TDMS_USER)
Enqueue on local entry package 90007, phase TDBAS_PHASE_DATA_TRANSFER, activity TD09P_START_JOBS not set
Job cancelled
Log job CNV_MBT_CNV_TDMS_09_START_JOBS :
Job started
Step 001 started (program CNV_TDMS_09_START_JOBS, variant &0000000000001, user ID TDMS_USER)
Internal RFC error in status management: package 90007, phase TDBAS_PHASE_DATA_TRANSFER, acty TD09P_START_JOBS
Job cancelled

Similar Messages

"Start Deletion of Data in Receiver System" does not start

I faced the problem tha data deletion in Receiver system is not started in TDTIM synario.
I started the activity "Start Deletion of Data in Receiver System" , the job "CNV_TDMS_09_RESTART_JOBS" is aborted till the job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over in Receiver System.
The error message is "No log was created for object CAGTFBS and sub-objekt SLOMBT".
After The job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over, the job "CNV_TDMS_09_RESTART_JOBS" is finished normaly but the no deletion job is released.
I carried out some deletion job by manual operation but other deletion job is not released.
Does Anyone knows the solution of this problem ?
Version:TDMS3.0 SP17
Basis: 700
Susumu

Hi Joerg,
Thank you for your reply.
> Please check the syslog for any reference to bad defined batch jobs! (all on receiver)
Syslog is nothing in receiver system.
> Is there any deletion job that can not be startet manually on the receiver side?
> (So normally on top of the list of scheduled deletion jobs.
I think all deletion job can be started manually.
Nomally, some deletion job is finished, the job is released next deletion job but no deletion jobs is released.
In addition, If rerun job "CNV_TDMS_09_RESTART_JOBS" is finished, no deletion jobs is released.
Best regards,
Susumu

I cannot stop the activity "Start Deletion of Data in Receiver System"

Hi all
I tried to stop the activity "Start Deletion of Data in Receiver System" in my MDC package with the troubleshooting assistant. Unfortunately I get the following error:
No destination exists for the PACKID:
Message no. CNV_MBT042
Have you got an idea, what the problem is? Or how I can stop in a propre different way the activity?
Thanks a lot for your help
Roger

Hi Roger,
why do you want to stop this phase ?
Anyway : you can stop the process and than the phase can be restarted at a later stage.
Regards,
Eddy

My Mac has started deleting things... System Preferences, Applications

Hi
My Macbook has started deleted things. Systm Preferences, Bluetooth, Garageband... My work for college, My music ! I'm currently broke also and I think my insurance has run out. It's the 2009 version. i can't afford to replace it and I've lost the CDs that came with it. My tutor at college is going to back up my system on his hardrive and re-boot but does anyone know why this would happen and has anyone else experienced issues like this? Thnaks guys, Massively panicking

I am having the same problem, and it's driving me crazy! I have the same macbook as chrispy17, except with Lion. Does anyone know how to fix this?

TDMS - time based reduction - receiver system deletion

Experts,
I'm doing a time based reduction. I'm on the step "Start Deletion of Data in Receiver System". It's been running for over 18hours.
But I don't see any jobs running in SM66 on the Central/Control or Sender or Reciever systems.
When I click on the "Task" button, I see it has completed 8,444 of 12,246 sub activites. There are 3,802 not yet started.
We're on all the latest levels of DMIS and ECC.
Any ideas?
Thanks
NICK

Ashley and Niraj,
Hey, I'm all for tips/tricks so don't worry about messing up my thread.
I completely shut down the central/control system via stopsap and restarted. Still it was in "running" status but no jobs were running on sender/rec or central/control.
So I tried the trouble-shooting but it was un-clear to me what to do.
I ended up highlighting the phase I reference earlier, then doing "execute" again. The status changes from the "truck" to a green flag and I started to see jobs run again on the receiver system. Again they have stopped, but I see another job scheduled to run in a few minutes....It's just weird, I didn't run into this on my last time-based copy.
I'll post a few things I've learned to increase performance:
RDISP/MAX_WP_RUNTIME = 0
At LEAST 25 WP and 25 BCK procs
rec/client = OFF
RDISP/BTCTIME = 60
RUN STATS regularly
TAKE OUT OF ARCHIVELOG MODE
Read/Impl these notes:
Read theseu2026Update these parameters
o TD05X_FILL_VBUK_1 Note 1058864
o TD05X_FILL_VBUK_2 Note 1054584
o TD05X_FILL_BKPF Note 1044518
o TD05X_FILL_EBAN Note 1054583
o TD05X_FILL_EQUI Note 1037712
Set these oracle index on rec system:
Table: QMIH
fields: MANDT, BEQUI
Table: PRPR
fields: MANDT, EQUNR
Table: VBFA
fields: MANDT, VBELN, VBELV, POSNV
set parameter u2018P_CLUu2019 to u2018Yu2019 in the following
activities before you start the activities for filling internal header tables:
TD05X_FILL_BKPF
TD05X_FILL_CE
TD05X_FILL_EKKO
TD05X_FILL_VBUK
TD05X_FILL_VBUK_1
TD05X_FILL_VBUK_2
TD05X_FILL_VSRESB
TD05X_FILL_WBRK_1
run TCODE CNVMBTACTPAR, specify the project number to do this
IMPORTANT TCODEs
CNV_MBT_TDMS_MY  Main TDMS starting point
CNVMBTMON  Process Monitor (must know your project number)
DTLMON  MWB transfer monitor
CNVMBTACTPAR  activity parameters
CNVMBTACTDEF  MBT PCL activity maint
CNVMBTTWB  TDMS workbench to develop scrambling rules
CNV_TDMS_HCM_SCRAM  run in SENDER system for scrambling functionality
Reports
CNV_MBT_PACKAGE_REORG  to reorganize TDMS projects..aka delete
CNV_MBT_DTL_FUGR_DELETE  deletes function groups associated with old projects
Tables
CNVMBTUSEDMTIDS  lists obsolete MTIDs
IMPORTANT NOTES
Note 894307 - TDMS: Tips, tricks, general problems, error tracing
Note 1405597 - All relevant notes for TDMS Service Pack 12 and above
Note 1402704 - TDMS Composite Note : Support Package Independent
Note 890797 - SAP TDMS - required and recommended system settings
Note 894904 - TDMS: Problems during deletion of data in receiver system
Note 916763 - TDMS performance "composite SAP note"
Note 1003051 - TDMS 3.0 corrections - Composite SAP Note
Note 1159279 - Objects that are transferred with TDMS
Note 939823 - TDMS: General questionnaire for problem specification
Note 897100 - TDMS: Generating profiles for TDMS user roles
Note 1068059 - To obtain the optimal deletion method for tables (receiver)
Note 970531 - Installation and delta upgrade of DMIS 2006_1
Note 970532 - Installation of DMIS Content 2006_1
Note 1231203 - TDMS release strategy (Add-on: DMIS, DMIS_CNT, DMIS_EXT...)
Note 1244346 - Support Packages for TDMS (add-on DMIS, DMIS_CNT, ...)
I'm doing this for an ECC system running ecc 6.0 EHP6 by the way.
Still any help with my issue on the delete would be helpful. but post tips I don't kwnow about
NICK

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Cannot start a default data collector set in Server 2008 R2

Trying to start a default data collector set "System Performance" in Windows Server 2008 R2, but it won't start.
I am a domain and enterprise admin, and have actually added my domain credentials to the two Perfmon roles ("Performance Monitor Users" and "Performance log users"). Every time I try to start the "System Performance" Data Collector
set, it fails to start - the start function gets dimmed together with the stop function.
I check the task scheduler, and it seems everytime I have tried to run the data collector set, I get the following error logged:
"Logon Failure: the user has not been granted the requested logon type at this computer. (0x80070569)"
I can see that the error number means I do not have access to the machine, but I assure you that I'm logged in as a enterprise admin, the machine is the primary domain controller, and I have permission to do anything else on this machine and the domain.
I am not experiencing the same problem with two 2012 Servers or either of the two VMs running on this 2008 R2 Server.
Thanks in advance.
FMilani

Hi,
The 0x80070569 error typically caused by the permission issue, If are the enterprise admin, please try the following steps to confirm there haven’t other GPO permission reason.
1. Create a new OU and put the this server in it
2. Create a Group Policy object for this new OU
3. We blocked inheritance of other policies (if applicable)
4. Make sure we did not set ANY user rights in our new policy
5. We edited the local user rights add your account as local admin.
6. Run the cmdlet gpupdate /force.
More information:
Starting or Live Migrating Hyper-V virtual machines may fail with error 0x80070569 on Windows Server 2012-based computers
http://support.microsoft.com/kb/2779204/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

The system could not calculate the fiscal year start or finish date message

While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers

Emails on my Tour have started deleting themselves after about 30 - 45 minutes of receiving them

Device info
Your carrier: Telus Mobility
Model info and OS version: Tour 9630, OS 5.0.0.419 (674)
Apps and free space
File free before and after a battery remove/replace: 100 MB
Did a battery pull fix your issue?: No
Apps installed and their version if possible: None
BT device model/version (you will have to look at the BT device): N/A
Over the last couple of weeks, all my received emails have started deleting themselves. All the emails I had prior to this happening have also been deleted. If I send myself an email, it'll appear on my BB and then delete itself after about 30 - 45 minutes. If I send email from my BB, the sent message will stay there. It's only received emails that are deleted.
This only started happening recently and prior to that there were no issues. I haven't changed any email settings. This happens regardless of whether or not Outlook is running or not.
My mobile carrier says everything is fine on their end and it's an issue with my ISP. My ISP says everything is fine on their end and it's an issue with my mobile carrier.

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.
If you search the Internet you will find numerous posts and suggestions that describe your situation with many, many different suggestions and possible solutions. You will find pages and pages of suggestions that may or may not solve your problem. There isn't any one time cure all suggestion based on your symptom description. You might want to try a few suggestions and see if you get lucky.
You may need to separate the "wheat from the chaff" (hardware issues from software issues) or you might be chasing the issue for many, many hours.
I have seen hardware failures produce similar issues. You might try running diagnostics for 1-2 hours and see if the diagnostics will detect an issue. Even hardware diagnostics are not a cure all solution for possible hardware issues.
If you can roll your PC back to a known good Windows restore point before the issue started then give that a try. Otherwise back up your data to external media and use the external HP recovery media to bring your PC back to a factory day one condition. Then without loading a lot of software add ons, try some multiple browsing for the time period that the issue typically occurs.
Post your results.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Issue:Creation of Extended iDOC data entries in receiving system.

Hi all,
I have extended standard IDOC MATMAS05 for classification view.I am receiving the data successfully on recewing side.And i have done coading in user exit to store data in database table inside
IDOC_INPUT_MATMAS01- function module.
When i execute the BD10 from sending sytem and view the idoc at receiving end from WE05 i can see the idoc but when i try to see the material i cant see the classification(extended) view in mm03.Rest of the views are created .When i execute the idoc from WE19 ,Classification(extended) view gets created.
Please guide me so that the CLASSIFICATION view get automatically created in receiving system without using WE19.
Thanks.

Yes i used this function module-
CALL FUNCTION 'BAPI_OBJCL_CREATE'
              EXPORTING
                objectkeynew            = objectkeynew1
                objecttablenew          = 'MARA'
                classnumnew             = wa_classnumnew1
                classtypenew            = z1sklart-klart              "classtypenew1
                status                  = '1'
STANDARDCLASS           =
CHANGENUMBER            =
                keydate                 = sy-datum
NO_DEFAULT_VALUES       = ' '
IMPORTING
CLASSIF_STATUS          =
              TABLES
ALLOCVALUESNUM          =
                allocvalueschar         = allocvalueschar2[]
ALLOCVALUESCURR         =
                return                  = return1
*WAIT UP TO 1 SECONDS.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
               wait          = 'X'
IMPORTING
RETURN        =
Please explain me how to maintain the Views Status at MARA general info segment level.

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.

Can we archive data twice from system-Bank master data deleted

We have archived the data of bank after setting it to deletion in program FI_BANKS_WRI.Can i archive same data again from system.

resolved

Start Deletion of Data in Receiver System

Similar Messages

Maybe you are looking for