Start discussion...way around installing elements 13 on an incorrect platform....help!

@I have purchased photoshop elements 13 for a 32 bit computer on the advice of a retailer, however mine is 64 bit. Is there a way around this?

I would like to add that I originally was unsuccessful installing PRE9 using OS 10.6. I had installed OS 10.7 when it became available. I had contacted Adobe Tech Support once about a week ago and was unsuccessful following the advice given, including uninstalling Adobe Photoshop CS4 from my iMac and installing from the System Adminstrator log in. Either the fonts were the issue or installing from my hard drive not the dvd was the issue.
I hope this helps someone get up and running with PRE and avoid some aggravation.

Similar Messages

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Question on installing Elements 8

What is the best way to install element 8 if you already have elements 5 on your computer? Is there that many problems with installing 8 while 5 is on your computer or should you delete elements 5 before you install elements 8.
Thanks!

There is no problem in having PSE 5 and PSE 8 at the same time on your machine. Just after installing PSE 8, you would need to convert your catalog to PSE 8 compatible version by launching organizer, so that PSE 8 can use the same catalog file.
Unless there is any acute space crunch, I wouldnt suggest that you need to remove PSE 5. If you are planning to then you can anytime after installing PSE 8 as well.
Regards,
Ankush

Is there a way not to have to use the disk to start or exit Adobe Premiere Elements 13. I do not want to have to carry a disk around with me all the time.

Is there a way not to have to use the disk to start or exit Adobe Premiere Elements 13. I do not want to have to carry a disk around with me all the time.

tljtommy
There is a known No Disc error using Premiere Elements 13.
The fix is to delete the OldFilm.AEX file which is found in Window 8.1 64 bit
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file that you delete.
Adobe first posted this information in one of the threads here, and it has worked for essentially all who have
gotten the No Disc error in Premiere Elements 13.
Please let us know if this works for you also.
Thank you.
ATR

Working on Win 8.1, Downloaded PSE 13, installed, and it asks me for login every time I start the software. Any way around this? I want to use PSE on a machine that will be permanently offline.

Any way around this? I want to use PSE 13 on a workstation that will be permanently offline. I spent hours with Adobe support and they suggested deleting a file called
opm.db in the following location
[System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
and then rename the oobe folder to new oobe folder
But then our chat session automatically terminated and that's as far as I got.
Will this work?
Will I still have full functionality?
Can someone help? Thanks!
Desperate in Denver PA

hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

I have a new iMac i want to install adobe photoshop elements 10, I only have the DVDs. Is there another way of installing this software?

I have just bought the latest 27 inch imac. I tried to install my adobe photoshop elements 10 dvd and found no drive. Is there any other way to install this software onto the computer? It is already installed on my macbook pro, is there an option to transfer the files?

No I meant to "borrow" the other Mac's optical drive, with the new Mac as the Target. cornelius puts it succinctly here, except we're not talking about a Mac with a broken drive. And you would select the Adobe DVD, not the "install disc."
I suggest that you get a firewire cable. Then boot the computer with the working optical drive into Firewire Target Disk Mode, startup the computer with the broken drive and hold down the Option key. Then select the install disk as boot and startup and proceed with installation.
https://discussions.apple.com/message/11874414#11874414
Actually, I think cornelius's post isn't exactly what's required, but I think you get the idea.
Message was edited by: WZZZ

Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

How to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer

how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

How to make a Dynamic Link starting in After Effects to Premier (not other way around)

I have seen a ton of tutorials how to Dynamic Link from Premier to After Effects. (but not the other way around. )
I need instructions/video how to link starting in After Effect to Premier.
For example if I make a title in After Effects and then want to dynamic Link it into Premier how is this done?
Thanks!!

I've looked at this too. When I first started using DL, I thought that it was basically a two way street between applications. But that analogy doesn't work very well. DL is PPro-centric. Like PPro is the hub, DL the spokes, and the other Abobe applications are on the rim. And this makes a fair amount of sense. The central feature of an editing suite is the editor, and that would be PPro.
Another way to look at it is that you can push from PPro to AE, and PPro can pull from AE, but AE can not push to PPro. So the direct answer to "I need instructions/video how to link starting in After Effect to Premier" is, you can't. What you can do is make your title composition in AE, import that AE project into PPro, and use the composition as you would any other asset in PPro. Then when you change your title in AE, you'll see the change in PPro almost immediately without you having to do anything.
When I'm making motion lower thirds, for example, I now make them in AE. I let the AE project reside in the directory with the PPro project that I made the lower thirds for. Then when I want the lower thirds in PPro, I just import the AE lower thirds into the PPro project. There's a few ways to do this. One is to use the Media Browser. The MB will open up the AE project for you and let you select which composition you want to import. Another way is to File...Adobe Dynamic Link...Import AE composition which does more or less the same thing. There may be other ways as well, IDK.

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this c

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this code and it is a Christmas gift to my wife. HELP!

I had this problem. There are actually two boxes. The outside one with the photos and stuff and glued into it is another box containing the disks. That box has the serial number. Adobe was NO help with this as if no one else ever could not find it. I had to rip open the outer box.

I have a Netgear NAS which uses Stora software. Mavericsks will not let me install the software as it is not from an approved developer. Is there any way around this?

I have a Netgear NAS which uses Stora software. Mavericks will not let me install the software as it is not from an approved developer. Is there any way around this?

There is, but why do you need the s/w installed? The NAS should have a web admin interface, accessible via ip address (http://<ip address>) which should allow all the needed configuration that is required for it to work with machines running os x.
Try to install as little s/w as you need to do something in Mavericks or any OS as it is usually the cause of future issues or problems.
If you're intent on installing the s/w, go to System Preferences > Security & Privacy > General and If you have tried to run it before, it should be listed there. You can then "un-block" it should you wish.

I have updated to Itunes 10.5 on Windows and everytime i start it now, it says "updating Itunes library" and crashes at around 75%. i have uninstalled and re-installed it. No joy! Someone help! Thanks Umar.

I have updated to Itunes 10.5 on Windows and everytime i start it now, it says "updating Itunes library" and crashes at around 75%. i have uninstalled and re-installed it. No joy! Someone help! Thanks Umar.

Lets see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?

Start discussion...way around installing elements 13 on an incorrect platform....help!

Similar Messages

Maybe you are looking for