Start-End points not working when sent to Encore

Hello all, I tried to send a project to Encore but I got an error and Encore closed, I did it again and it worked but the start-end points didn't work, I got the whole project. I have since gone back to a former project which I had previously outputted small segments for YouTube and no matter where you set the Start-End points you get the whole project. Is Encore now corrupt or have I changed something ?

I don't quite know what you mean, I opened a project that I left set to output a small portion for You Tube. I clicked dynamic link send to Encore, when Encore opens the whole timeline is there,or am I getting confused ? do you always get the whole timeline start to finish when you send to Encore or are you supposed to get just the part between the start-end points ?

Similar Messages

Picture text not working when sent from iPhone to non iPhone

Since this 6.1 update that I have told everyone not to update. My phone has been doing strange things and I have called and talked to apple and they said they have not heard anything about it. First off, when I try to send a picture text to someone that does not have an iPhone such as an android they either a) can't open it or b) it opens as a video and flashes off. They had no problems before this update. So today my iMessage stopped working. I deletes the messages I had and sent a test text to iPhone friends and it started working. I also went I to settings and added my email to iMessage. In doing this it got me to thinking that if this changed by itself maybe it had something to do with the SMS. Which is turned on already. I turned off iMessage and sent picture text to non iPhone and it worked. I don't want to have to turn off and no all the time anyone else had this problems?

Hi Steve,
I have tried to export to epub 2 and 3. The video is MP4 (h264). It was working just fine on all devices now I can't seem to get any video to export and work.
Pretty sure it all stopped working after the Yosemite upgrade on the Mac or iOS 8 on devices. Or maybe both.
Oddly, it plays in iBooks on my mac, just not on the iPad or iPhone.
I've also tried to just export a couple of short test epubs with vids in different formats but get the same result....not working.

HT1926 start services is not working when i try to install itunes

I had to uninstall itunes and now I get an error message saying says I cannot start services and need to see if I have service privileges

See Troubleshooting issues with iTunes for Windows updates.
tt2

Start & End date not working?

So I was wget-ing a bunch of logs at once, a single day at a time, and found that despite requesting different days, I received all the same results.
For the URL below I received logs dated 3-01:
http://deimos3.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/eTech-ohio-g ov-public?StartDate=2010-04-01&EndDate=2010-04-01&credentials=Administrator%40ur n%3Amace%3Aitunesu.com%3Asites%3AeTech-ohio-gov-public&identity=xxxxxx%5D&time=1 272570013&signature=xxxxxx

Sounds like an issue on Apple's end…still, I'd be kind of curious to know what would happen if you changed things so you requested the 2010-05-01 logs. "Normally" that should cause an error ("date is in the future")…but I wonder if it'd produce the 4/1 logs. Then you'd know there was an "off-by-one" error somewhere. Maybe also request logs on the days surrounding 4/1 (3/31, 4/2)…just for kicks, just to see what results you get.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

FCP Audio Clips in Soundtrack Pro - Marking the Start & End Points

When I double click on an audio clip that I've sent from FCP into Soundtrack Pro I seem to open up the entire media file.
How do I lock off or at least mark the clip start & end?
I don't see any markers that tell me which part of the clip is actually used in the imported FCP sequence.
I only want to make (non-destructive) changes to the clip.
I don't want to alter the original media file.
And I just want to work on the part that's used in the FCP sequence.
It makes sense that there's a way to show the start & end points of the clip but I'm just not seeing it.

I am a bit of a newb here, so pardon if my explanation is a little unpolished, but I have been working on some of my projects like you are and this is what i figured out. I select my sequence in FCP and send to stp as a multitrack project. The whole audio timeline shows up just as it looks in fcp, and the video track shows as one large clip that is made up of all my cuts put together. Now, my audio tracks are all on one line, and i can see all the clips with their cuts on the sequence. I click the first one and open it up to work on in the waveform editor. At that point i see the entire audio clip, including the part before and after my cut that i am using in my sequence, but i also see, up near the playhead, gray markers that show the actual part of the clip i am using in my edit. It is easest to hit shift-z to look at the entire clip on screen, and then find the grey markers. Also, if you play audio before the in marker, you will hear it but you will see that the video is not playing anything, then once you enter into the in-out section the video will play along, and when you pass the out marker the video freezes as the audio keeps playing. Hope this helps.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

My volume is not working when on the ringer what do I do

My iPhone volume is not working when I have the volume set on. It will work with the headphones but other then that nothing. What's going on with it?

supposedly from what I have read it is a software issue. I actually am also having this problem it worked after I performed a full reset, but now it has started again tomorrow I am going to the apple store to find out what I can do as I bought my 4s right before the 5 was released.

Authorization Object is not working when report is modified.

Hi BW Guru's
We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
Please send me the solution as it is very much urgent.
The solution will be def. awarded with full points.
Regards
Sanjay

hi Sanjay,
please don't post the same question again, check and response back from your previous thread
Re: Authorization Object is not working when report is Modified.
hope this helps.
would be nice if you reward for helpful answers to all of your previous postings, e.g
docs related to RRI

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Windows 8.1 - Upgrade from 8, Start Button Does Not Work

I cannot find a fix for my 8.1 start button.
It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
I've also tried:
Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
dism /online /cleanup-image /restorehealth
Any ideas? I would prefer not to do a clean install. Thanks in advance.
HP Touchsmart 23 series
i5-3475S 2.90GHz
16GB RAM
1TB HDD

Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
And what is the kind of the account, Domain? Local? Or both?
This is local machine.
It still doesn’t work in a new account?
Same issue happens with a new account.
What happens if you use win + "X"?
Win + "X" works fine; displays options.
Regarding to the “doesn’t work, both for screen touch and mouse?
Left-click via the mouse does not work. Touch works fine.
Can you try to copy the WinX folder from a working PC to your PC for a test?
I do not have another Windows 8.1 machine available to me.

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Start-End points not working when sent to Encore

Similar Messages

Maybe you are looking for