Start extract pump for the Intermediary system
Hi guyz,
I need to launch Intermediary system. I installed just GoldenGate soft on a separate server.
The architecture:
There is an extract on the 1st server, which copy trails to the Intermediary system to 2nd server. There is a replicat on 3rd server for recording to Oracle database.
I need just copy trails from 2nd server to 3rd server using GoldenGate.
I have an issue on 2nd server (Intermediary system) when I configuring an extract pump as it described in official docs (5.4.2 Intermediary System):
https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_live_reporting.htm
>ggsci
ADD EXTRACT epmp1, EXTTRAILSOURCE /u01/app/oracle/ggs/11.2/dirdat/tr
add rmttrail /u01/app/oracle/gg_files/dirdat/tr, extract epmp1
ADD EXTTRAIL /u01/app/oracle/ggs/11.2/dirdat/tr, EXTRACT EPMP1
>ggsci edit param epmp1
EXTRACT epmp1
SOURCEDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def
-- Specify the target definitions file if SOURCEDEFS was used:
TARGETDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def
-- Specify the name or IP address of the standby system:
RMTHOST dc0a5db00.ps, MGRPORT 7809
RMTTRAIL /u01/app/oracle/ggs/11.2/dirdat/tr
TABLE ns_build.*;
TABLE logdb.*;
TABLE monitor.gg_mon;
tail -300 ggserror.log
2015-04-17 13:28:29 ERROR OGG-00042 Oracle GoldenGate Capture for Oracle, epmp1.prm: SOURCEDEFS may not be used with this type of Extract.
2015-04-17 13:28:29 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, epmp1.prm: PROCESS ABENDING.
Before that, I made the def file.
Plz, help in advance
Hi again,
I have just removed the parameter PASSTHRU:
[oracle@dc0gg00 ggs]$ more dirrpt/EPMP1.rpt
Oracle GoldenGate Capture for Oracle
Version 12.1.2.1.0 OGGCORE_12.1.2.1.0_PLATFORMS_140727.2135.1_FBO
Linux, x64, 64bit (optimized), Oracle 11g on Aug 7 2014 09:31:26
Copyright (C) 1995, 2014, Oracle and/or its affiliates. All rights reserved.
Starting at 2015-04-20 12:22:07
Operating System Version:
Linux
Version #2 SMP Wed Sep 10 06:10:25 PDT 2014, Release 3.8.13-44.1.1.el6uek.x86_64
Node: dc0gg00.ps
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 11604
Description:
** Running with the following parameters **
2015-04-20 12:22:07 INFO OGG-03059 Operating system character set identified as US-ASCII.
2015-04-20 12:22:07 INFO OGG-02695 ANSI SQL parameter syntax is used for parameter parsing.
EXTRACT epmp1
SOURCEDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def
TARGETDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def
RMTHOST dc0a5db00.ps, MGRPORT 7809
RMTTRAIL /u01/app/oracle/ggs/11.2/dirdat/tr
TABLE ns_build.*;
TABLE logdb.*;
TABLE monitor.gg_mon;
2015-04-20 12:22:07 INFO OGG-01851 filecaching started: thread ID: 140601218877184.
2015-04-20 12:22:07 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/u01/app/oracle/ggs/dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 64G
CACHEPAGEOUTSIZE (default): 8M
PROCESS VM AVAIL FROM OS (min): 128G
CACHESIZEMAX (strict force to disk): 96G
Source Context :
SourceModule : [er.extract.extract]
SourceID : [/scratch/aime1/adestore/views/aime1_adc4150384/oggcore/OpenSys/src/app/er/extract/extract.cpp]
SourceFunction : [extract_main]
SourceLine : [807]
ThreadBacktrace : [10] elements
: [/u01/app/oracle/ggs/libgglog.so(CMessageContext::AddThreadContext()+0x1e) [0x7fe051d95dce]]
: [/u01/app/oracle/ggs/libgglog.so(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x340) [0x7fe051d90ae0]]
: [/u01/app/oracle/ggs/libgglog.so(_MSG_ERR_STARTUP_ER_EXTRACT_PARAM_UNSUPPORTED(CSourceContext*, char const*, CMessageFactory::MessageDisposition)+0x31)
[0x7fe051d8107d]]
: [/u01/app/oracle/ggs/extract(extract_main(int, char**)+0x9af) [0x5b703f]]
: [/u01/app/oracle/ggs/extract(ggs::gglib::MultiThreading::MainThread::ExecMain()+0x4f) [0x6a1e2f]]
: [/u01/app/oracle/ggs/extract(ggs::gglib::MultiThreading::Thread::RunThread(ggs::gglib::MultiThreading::Thread::ThreadArgs*)+0x104) [0x6a2334]]
: [/u01/app/oracle/ggs/extract(ggs::gglib::MultiThreading::MainThread::Run(int, char**)+0x8b) [0x6a26fb]]
: [/u01/app/oracle/ggs/extract(main+0x3f) [0x5b643f]]
: [/lib64/libc.so.6(__libc_start_main+0xfd) [0x7fe04d574d5d]]
: [/u01/app/oracle/ggs/extract() [0x52ad09]]
2015-04-20 12:22:07 ERROR OGG-00042 SOURCEDEFS may not be used with this type of Extract.
2015-04-20 12:22:07 ERROR OGG-01668 PROCESS ABENDING.
Similar Messages
-
Looking for SAP solution to extract data from the production system
Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof MurkowskiHi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx. -
Error "codepage could not be determined for the receiver-system"
Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
StefanThis error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek -
Extract Stopped for the Device
hi guys
how do I configure the Doe for stop this message ?
Extract Stopped for the Device. Days not synced exceeds configured thresholdEnable Extract
I found these configurations.
Configure Maximum Level Values to Stop Extract for Receivers
Maximum Threshold for Queue Size (bytes):
Maximum Threshold for Days not synced:
Guys , can we explain me details about :
Statistics Configuration
System Status Configuration
Thaks
Edited by: esoliveira on Jul 16, 2011 7:50 PMHi,
best and most complete explanation you should find here:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/25/f091424bee7073e10000000a155106/frameset.htm
Regards,
Oliver -
Could not start cache agent for the requested data store
Hi,
This is my first attempt in TimesTen. I am running TimesTen on the same Linux host (RHES 5.2) that running Oracle 11g R2. The version of TimesTen is:
TimesTen Release 11.2.1.4.0
Trying to create a simple cache.
The DSN entry for ttdemo1 in .odbc.ini is as follows:
+[ttdemo1]+
Driver=/home/oracle/TimesTen/timesten/lib/libtten.so
DataStore=/work/oracle/TimesTen_store/ttdemo1
PermSize=128
TempSize=128
UID=hr
OracleId=MYDB
DatabaseCharacterSet=WE8MSWIN1252
ConnectionCharacterSet=WE8MSWIN1252
Using ttisql I connect
Command> connect "dsn=ttdemo1;pwd=oracle;oraclepwd=oracle";
Connection successful: DSN=ttdemo1;UID=hr;DataStore=/work/oracle/TimesTen_store/ttdemo1;DatabaseCharacterSet=WE8MSWIN1252;ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB;PermSize=128;TempSize=128;TypeMode=0;OracleNetServiceName=MYDB;
(Default setting AutoCommit=1)
Command> call ttcacheuidpwdset('ttsys','oracle');
Command> call ttcachestart;
*10024: Could not start cache agent for the requested data store. Could not initialize Oracle Environment Handle.*
The command failed.
The following is shown in the tterrors.log:
15:41:21.82 Err : ORA: 9143: ora-9143--1252549744-xxagent03356: Datastore: TTDEMO1 OCIEnvCreate failed. Return code -1
15:41:21.82 Err : : 7140: oraagent says it has failed to start: Could not initialize Oracle Environment Handle.
15:41:22.36 Err : : 7140: TT14004: TimesTen daemon creation failed: Could not spawn oraagent for '/work/oracle/TimesTen_store/ttdemo1': Could not initialize Oracle Environment Handl
What are the reasons that the daemon cannot spawn another agent? FYI the environment variables are set as:
ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
ANT_HOME=/home/oracle/TimesTen/ttdemo1/3rdparty/ant
CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
oracle@rhes5:/home/oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
/home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
CheersSure thanks.
Here you go:
Daemon environment:
_=/bin/csh
DISABLE_HUGETLBFS=1
SYSTEM=TEST
INIT_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/init+ASM.ora
GEN_APPSDIR=/home/oracle/dba/bin
LD_LIBRARY_PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
HOME=/home/oracle
SPFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
TNS_ADMIN=/u01/app/oracle/product/11.2.0/db_1/network/admin
INITFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
HTMLDIR=/home/oracle/+ASM/dba/html
HOSTNAME=rhes5
TEMP=/oradata1/tmp
PWD=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin
HISTSIZE=1000
PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/oci:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/jdbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc_drivermgr:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/proc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/sdk:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant/bin:/usr/kerberos/bin:/bin:/usr/bin:/usr/local/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:/usr/platform/SUNW,Ultra-2/sbin:/u01/app/oracle/product/11.2.0/db_1:/u01/app/oracle/product/11.2.0/db_1/bin:.
GEN_ADMINDIR=/home/oracle/dba/admin
CONTROLFILE_DIR=/u01/app/oracle/backup/+ASM/controlfile_dir
ETCDIR=/home/oracle/+ASM/dba/etc
GEN_ENVDIR=/home/oracle/dba/env
DATAFILE_DIR=/u01/app/oracle/backup/+ASM/datafile_dir
BACKUPDIR=/u01/app/oracle/backup/+ASM
RESTORE_ARCFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_arcfiles.txt
TMPDIR=/oradata1/tmp
CVS_RSH=ssh
ARCLOG_DIR=/u01/app/oracle/backup/+ASM/arclog_dir
REDOLOG_DIR=/u01/app/oracle/backup/+ASM/redolog_dir
INPUTRC=/etc/inputrc
LOGDIR=/home/oracle/+ASM/dba/log
DATAFILE_LIST=/u01/app/oracle/backup/+ASM/datafile_dir/datafile.list
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
PS1=rhes5:($ORACLE_SID)$
G_BROKEN_FILENAMES=1
SHELL=/bin/ksh
PASSFILE=/home/oracle/dba/env/.ora_accounts
LOGNAME=oracle
ORA_NLS10=/u01/app/oracle/product/11.2.0/db_1/nls/data
ORACLE_SID=mydb
APPSDIR=/home/oracle/+ASM/dba/bin
ORACLE_OWNER=oracle
RESTOREFILE_DIR=/u01/app/oracle/backup/+ASM/restorefile_dir
SQLPATH=/home/oracle/dba/bin
TRANDUMPDIR=/tran
RESTORE_SPFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_spfile.txt
RESTORE_DATAFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_datafiles.txt
ENV=/home/oracle/.kshrc
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CONNECTION=50.140.197.215 62742 50.140.197.216 22
LESSOPEN=|/usr/bin/lesspipe.sh %s
TERM=xterm
GEN_ETCDIR=/home/oracle/dba/etc
SP_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/spfile+ASM.ora
ORACLE_BASE=/u01/app/oracle
ASTFEATURES=UNIVERSE - ucb
ADMINDIR=/home/oracle/+ASM/dba/admin
SSH_CLIENT=50.140.197.215 62742 22
TZ=GB
SUPPORT=oracle@linux
ARCHIVE_LOG_LIST=/u01/app/oracle/backup/+ASM/arclog_dir/archive_log.list
USER=oracle
RESTORE_TEMPFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_tempfiles.txt
MAIL=/var/spool/mail/oracle
EXCLUDE=/home/oracle/+ASM/dba/bin/exclude.lst
GEN_LOGDIR=/home/oracle/dba/log
SSH_TTY=/dev/pts/2
RESTORE_INITFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_initfile.txt
HOSTTYPE=i386-linux
VENDOR=intel
OSTYPE=linux
MACHTYPE=i386
SHLVL=1
GROUP=dba
HOST=rhes5
REMOTEHOST=vista
EDITOR=vi
ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
ODBCINI=/home/oracle/.odbc.ini
TT=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/
SHLIB_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1//lib
ANT_HOME=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant
CLASSPATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/ttjdbc5.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/orai18n.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/jms1.1/lib/jms.jar:.
TT_AWT_PLSQL=0
NLS_LANG=AMERICAN_AMERICA
NLS_COMP=ANSI
NLS_SORT=BINARY
NLS_LENGTH_SEMANTICS=BYTE
NLS_NCHAR_CONV_EXCP=FALSE
NLS_CALENDAR=GREGORIAN
NLS_TIME_FORMAT=hh24:mi:ss
NLS_DATE_FORMAT=syyyy-mm-dd hh24:mi:ss
NLS_TIMESTAMP_FORMAT=syyyy-mm-dd hh24:mi:ss.ff9
ORACLE_HOME=
DaemonCWD = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info
DaemonLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/tterrors.log
DaemonOptionsFile = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttendaemon.options
Platform = Linux/x86/32bit
SupportLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttmesg.log
Uptime = 136177 seconds
Backcompat = no
Group = 'dba'
Daemon pid 8111 port 53384 instance ttimdb1
End of report -
An RFC destination could not be specified for the logical system
Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
KhushbooHi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo -
I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!
You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them) -
No maintenance cycle is open for the current system
Hello!
I have problems to use CharM functionality due to following error:
<b>No maintenance cycle is open for the current system</b>
The error arises when I try to set a urgent correction in status "In Development" I get the following error, menwhile I have an valid maintenance cycle active.
I use CharM functionality for the solution consisting of an single system with two clients:
SRM:000 (as DEV-system) (system role: source system)
SRM:100 (as PRD-system) (system role: target system)
- No maintenance cycle is open for the current system (meanwhile I have a valid maintenance cycle created and activated).
Futhermore I get the additional warning:
IBase component is not a productive system in system lanscape
Can some help me with this issue?
Thank you very much!
regards
ThomHello Kriti,
thank you very much for your response.
Unfortunately I also thought about it.
Basically my CharM procedure looks as follows.
I send the message from productive client (I have only one system with client 000 and 100) to Service Desk in SOLMAN.
There I can see the IBase of the productive client.
Then I create a urgent correction by assigning IBase to this IBase of productive client. It is also possible to change the IBase in change mode, so I have tried all the possible values of IBase and get the same error.
My problem also is that I have multiple values of IBase assigmenets, it means one system has multiple assigments to IBase components.
I do not know how to delete/cut these settings....
Thank you for your further help!
regards
Thom -
"user password expiration" for every 30 days for the NW2004S systems
Dear all,
We are using NW2004s with BI and DI,EP. We set the parameter "user password expiration" for every 30 days for the NW2004S systems(dual stack).
In the system users SAPJSF,NWDI_CMSADM,J2EE_ADMIN,NWDI_ADM, ADMINITRATOR is also getting change once in every month(30 days),So that we need to change the password and it should get update in the visual admin and config tools. Some time this arising problem. Is there any way to avoid the password expire for this particular user in the system .
Note :Password expire parameter should keep compulsory in the system
So Please guide us to resolve those problem.
Thanks in advance
Regards
Lakshminarayanan MHi!
I don't suggest you to change J2EE_ADMIN password. instead you should logon with your user.
Anyway.... please find below a small program to control passwords validity. for some users is very usefull.
REPORT ZS_ALTERA_DATA_PASS .
tables:usr02.
select-options : s_users for usr02-bname.
parameter: p_data like usr02-bcda1 default sy-datum.
update usr02 set bcda1 = p_data
where bname in s_users.
if sy-subrc eq 0.
MESSAGE 'Password validity changed' type 'S'.
else.
MESSAGE 'ERROR changing password validity' type 'E'.
endif.
cheers -
Charm implementation: No maintenance cycle is open for the current system
Gurus,
I'm in implementation project to use charm.
I've created SDCR using charm_create, and choose transaction type subject "Development (implementation)"
After approving the change request, so that the status become "Approved", I re-open the request to set into "in development", but there's error:
"No maintenance cycle is open for the current system"
I've checked notes and search the forum but not relevant to my subject.
Please help.
Regards,Hi Cesar,
I'm facing this issue now. I have followed Dolores blog
- The IBase is wrong: The IBase/component must represent the production system in the project landscape. RP1 is my production
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request. I have updated all roles and given the users SAP_ALL
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand. Refreshed it many times without errors
I'm on the latest level of Solman 7.1 SP8, I have implemented all the new notes as well.
I have attached a screenshot
To me it seems like a bug, but haven't found anything on marketplace. Any help is much appreciated.
Cheers
Jimmy -
ChaRM Error - "No maintenance cycle is open for the current system"
Hello All,
I am setting up ChaRM in development system after EGI session with SAP support. I have copied standard transactions to custom ones and created Maintenance and Implementation project to run test of all scenarios.
I now come across error of "No maintenance cycle is open for the current system" after I create a change request and in the change document, I cannot see it link with task list and the error message is displayed. I tried it with custom transaction as well as standard SAP transaction (SDCR) and get the same error.
What links a document to a maintenance cycle? Where can I see the config of this setup? I am trying to see where it is broken. I am using the correct IBASE number (production client in logical component), I tried to create a new logical component, new projects with correct settings but it still gives this error message. Please advice.
Thanks and regards,
NischalHi
did you also unlock the maintenance cycle and open for changes in solar_project_admin by right click
do check this blog
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples-final-points-and-appendix
Question no 17
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
Hope it solves
Regards
Prakhar -
Error "No maintenance cycle is open for the current system"
Hi,
I'm setting up the ChaRM for test purposes.
I have done everything according to SAP Expert Guided session requirements (like Basic configuration, Landscape and TSMS set-up) and also was reading and checking the following Blog " Change Request Management scenario: Working examples"
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
Everything seems to be ok:
1) Landscape ok, IBase created and active, Partners assigned to each component
2) Maintenance project created and Maintenance cycle set to "Development with release"
3) I can easily create Change request (I tried Normal correction), approve it.
4) When I open Change Document for approved change reques - it gives error "No maintenance cycle is open for the current system" and I can't proceed with setting Change document status to "In development".
In Change Request I indicate the only IBase (1) and as Component - SolMan clent 803, whish is set-up like PRD.
What could be wrong?
I tried reading all threads but did not get solution - there were suggestions to activate maintenance cycle (in my case it active), to check if business partners are assigned to IBase components (in my case done),
What else?
Thanks in advance,
Ausra GustainieneHi Ausra,
Please, take a look at this topic:
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
17. Error: "No maintenance cycle is opened for the current system"
Best Regards,
Fernando Rocha -
Database design for the Project System!
Hi
I need the database design schema for the Project System .
For example with the transaction code CJ20N at the left side all the Project Hierarchy is tabulated.
I want to know the relations between tables ?
Would you please help me ?look logical database PSJ with tcode SE36
grx. A. -
Where do I download Spanish and Italian voices for the Speech System Pref?
Where do I download the spanish and italian versions of the voices for the speech system pref? How do I install them?
I mean, if I buy an italian mac, does it come with the italian speech stuff?
No. OS X is the same no matter where it is sold, and it does not contain any non-English voices. You need to get them from the sources you have already been given.
If you want to ask Apple to add this feature in the future, go here:
http://www.apple.com/feedback/macosx.html -
AAT Apple Advanced Typography for the writing systems of world scripts
Thomas Gewecke writes:
If I had to choose one problem which does exist and causes considerable practical difficulties for a lot of people, it would be that lack of full OpenType support in OS X (and the resulting requirement for rare AAT fonts) makes it impossible for Mac users to do everything they might want in a number of important scripts, or to do anything at all in quite a few others.
This is a frequently asked question, so perhaps the simplest solution is to try to support this in a separate thread. It is probably preferable to repeat what Apple has published on the Unicode mailing list on the subject of writing systems in world scripts. A link to a supplier of AAT fonts for lesser languages is included in the references (Bassa, Brahmi, Burmese, Cambodian, Georgian, Inuktitut, Kannada, Laotian, Lepcha, Limbu, Malayalam, N'ko, Osmanya, Sinhala, Tai Le, Tamil, Telugu, Tibetan ...). The most advanced Arabic implementation is Mishafi from Diwan in London - this has earned praise on Typophile. There are several independent software publishers (aside from Apple iWork) that support authoring with AAT Apple Advanced Typography.
According to the Apple Unicode Liason, Deborah Goldsmith, as of OS X 10.2 it is possible for the small type maker to support a writing system in a world script through the optional Apple MORX Metamorphosis Extended tables in the SFNT Spline Font file format. Dropping an SFNT and an input method into the operating system adds the shaping for the writing system. And according to the Apple Unicode Liason, as of OS X 10.4 the optional Apple MORX tables for complex composition and the optional Microsoft GSUB tables for complex composition may peacefully cohabit in the selfsame SFNT Spline Font file (leaving aside the issue of whether this is sound advice, or whether sound advice should say that an SFNT should contain either TrueType or Type 1, either MORX or GSUB - not both in either case).
Hope this helps,
Henrik
References :
http://www.mail-archive.com/[email protected]/msg13047.html
http://lists.apple.com/archives/carbon-dev/2006/Nov/msg00579.html
http://www.xenotypetech.com/
http://www.diwan.com/mishafi/main.htm
http://www.typophile.com/node/16858
http://www.typophile.com/node/18098Please pardon any speedwriting in the following - it's off the cuff :
From the little I understand about the technical details of the differences between AAT and OpenType, I'd guess AAT to be the superior system, from the user's (or font designer's) point of view.
The issue is the business model. Apple TrueType 2 and Apple ColorSync 2 were developed to provide very, very, very highend character:glyph transforms and colour:colourant transforms in an application-independent manner.
The application model was Java and OpenDoc and while OpenDoc is defunct, as is Taligent, Java within which AAT is embedded is alive and kicking. In the application model the idea was that the small developer did not have to independently do elements outside the scope of the application.
Similarly, a graphics library was available to avoid the problem that PostScript is inherently unreliable as it is a programming model that can be used to extend the PostScript graphics model, causing PostScript programs to crash at critical times.
Software publishers in the nineteen-nineties published software for the standalone personal computer with its suite of standalone software. And the standalone software had its own Application Programming Interface that locked XTensions, Plug-ins and more into one and only one suite.
Adobe did NOT want QuickDraw GX and Adobe still has a 'white' paper in which the company states that the idea of the SFNT Spline Font file format as an application-independent product that takes over large parts of line layout is objectionable.
The pendulum does not stand still, however. In the 1970s there were terminals for time-shared centralised computing. In the 1980s and 1990s there were decentralised 'personal' computers in local area networks with their own storage and with graphic displays and printers.
The growth of instructure, both in terms of distributed networking and in terms of an international character set, permits a blend of time-shared computing and 'personal' graphics computing which was intended e.g. with the Apple MessagePad and with Java (Amelio married the ideas).
Apple bled external and internal developers with the late lamented GX and the application model was ten years ahead of its time. Modern imaging models are founded on the ideas implemented in GX and absolutely NOT on the ideas implemented in PostScript and PDF.
Jonathan Seybold told Apple to do an application for pagination, since an application for pagination is the sine qua non for a composition model, a separation model, and a document model (the Apple Portable Digital Document model).
Apple did not do that as it would have caused increased commercial conflict with Adobe, Quark and Macromedia at a time when hardcopy production was still the high end of the Apple product portfolio, and so while ColorSync survived TrueType as prosumer and pro solution suffered.
Ironically, XTT's developer did manage at one time to make his primary Tibetan font usable in both Mac and Windows environments -- by somehow combining AAT and OpenType elements within it -- but his considerable effort was then torpedoed, I gather, by some (unannounced, as usual) changes Apple made in font implementation in 10.4.
Deborah Goldsmith gave bad advice on the Unicode mailing list, I'm sorry but it was not sound technically. Dov Isaacs, Adobe's technical quality manager, gave sound advice in saying that Type 1 splines and TrueType splines should not be housed in the selfsame SFNT Spline Font file. I read what the Xenotype developer posted, and Apple bungled as Apple has bungled other important things like supporting a decent international default separation for ColorSync. There is no excuse whatsoever - if Apple cannot use Apple software with Apple defaults to do a decent job then Apple needs to find out whether it is working for Apple customers or is working for itself.
I don't know what might be necessary to make it possible for Mac users to employ OpenType fonts for complex scripts, but I can't believe that this goal is simply beyond the capabilities of Apple's engineers. Nor do I understand why Apple seems to keep, well, stalling on this issue.
The answer lies in the document model, not in the internationalisation model or in the SFNT imaging model. I am not an expert on Indic scripts (I don't speak or write any of them), but as I understand the matter Indic calligraphic scripts are simulated typographically using a feature called insertion that splits one character code into two glyph codes for vowels.
This type of typographic simulation does not pose problems if you are authoring with the aim of archiving and accessing hardcopy, since your audience is not interacting with the character string, but if you are authoring, archiving, and accessing softcopy then simulation methods such as insertion and bidirectionality may pose problems.
Specifically, if in the process of producing your softcopy pagination you loose the source character stream and the mapping of said character stream to the reshaped and reordered glyph stream, then you have to try to synthesise the character stream. And the more complex the reshaping and reordering, the less likely you are to get a successful simulation.
This is the issue between Adobe PDF produced from PostScript and Microsoft XPS which retains as well the source character stream as the mapping of the character stream to the glyph stream. Adobe PDF, by contrast, is basically a viewable graphic of the glyph stream - Adobe PDF does not even retain semantics for reshaping of formal Danish typography.
Hope this helps,
Henrik
References:
http://www.freepatentsonline.com/y2007/0136660.html
Maybe you are looking for
-
Creating PDF File from the browser
I need to create a PDF file from any browser and add more data to the PDF.. My partner is running WIN 8 and IE10. He can do this. I'm running WIN 7. Is this IE or Windows? Do I need a plugin that I don't have on the Win 7 box?
-
Clustered Oracle 9i AS and OC4J Problem
Hi, I am working with two Oracle 9i AS (9.0.2.0.1), serverA and serverB, in a clustered environment. I have published a servlet to the cluster under the URL of /MyApp and the main servlet is MyServlet. I have noticed that when I go to either URL: htt
-
Import user defined actionscript classes in mxml
Hi, I have an mxml file -- A.mxml I have an actionscript file asfile.as This file has a class definition. Package name - 'MyPackage' Class name - 'asfile' I want to import this class into A.mxml So, I write "import MyPackage.asfile.*;" in the Script
-
friends help me plz my iphone is crashed and go to bloue screen i conect it to pc and try to restore but erroe 40 is display and cant continue restore what i do now? im in iran
-
How to disable all ssl checking - sec_error_ca_cert_invalid
Is it possible to disable all SSL checking of any kind within firefox? I'm stuck with this error. (copied from another post) https://support.cdn.mozilla.net/media/uploads/images/2014-08-04-14-05-02-bc62ea.png I have already set mozillapkix to false.