Start failed for VM SBOP BI Platform 4.1 due to Amazon Web Services Issue

Hi Experts,
I'm having an issue creating an ERP foundation extension instance which interestingly enough I was able to do last week.
I was having a similar issue to the one in this recent thread: CAL - Connect to an instance of SAP ERP Foundation Extension powered by SAP HANA
I could create an instance successfully but was not able to connect.  As of now though, I am unable to create an instance and see the attached error message.  There haven't been any changes on the AWS side so I'm wondering if something else changed in the solution update 23 that may be causing this issue.
Thanks,
-Brett

Hi Brett,
can you please try again to deactivate and activate the solution.
This operation shares a clean copy with your AWS accounts.
Does it work afterwards?
Regards,
  Hannes

Similar Messages

  • Mac book pro (2008)will not start up,command-v gives (error) Import:Importer start failed for 89(kr:268435459)invalid destination port)

    will not start up.
    tried Command-v
    message reads
    (error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Is there a tutorial for hosting CF on Amazon web services?

    I'm interested in a getting started tutorial.  I know Coldfusion but don't know the hosting process with Amazon.

    Either of these might help:
    http://www.adobe.com/devnet/coldfusion/articles/coldfusion-cloud-aws.html
    http://www.adobe.com/au/products/coldfusion-amazon-web-services.html
    Regards, Carl.

  • Why FACETIME started failing for some Ipad users all of a sudden last week? Is there a fix for it yet?

    I bought an Ipad for my parents in India, so that they can use Facetime and make easy video calls. They are not techies to use Skype on other tablets. The FT was workig fine until last week. But it started failing all of a sudden. I have gone through apple forums and it looks like I am not alone facing this issue. Looks like there are some posts on the forums saying try few things to fix the issue. But no one speaks about why and how the issue started. Its too hard for my parents to understand this stuff and there is no Apple store with in 300 miles radius from where they live. Its so hard for my parents to loose the ability to see and talk to their kids. There is a reason why we $500 for one device. Does Apple understand this? Do they really care their customers satiesfacation??

    Don't know what are the metrics we have, to believe the issue is not evenly spread out worldwide. But to me, this is not based on geographical location of the device or network. Becuase my parents have an Ipad with IOS 7 and my cousin have an Iphone 5 with IOS 7. Both live in same city. While my parents were not able to use FT on their Ipad, connected to their home network, my cousin could use it on his Iphone. He was connected to my parents home network. Not to his mobile network. So this makes me think the issue is neither geo-graphical nor network related.
    Pataince It's been a week since the issue started and no meaningful answer from Apple yet. As I said, this is the only feature that made me choose an Ipad instead of other tablets with user friendly interface. Now this is gone too

  • Amazon Web Services for data-driven app?

    Has anyone ever used Amazon's Web Services to house a database for their app?
    Have you ever used the iOS SDK?
    Is it any good?

    Please post ASP.NET questions in the ASP.NET forums (http://forums.asp.net ).

  • Create custom AMS AMI for Amazon Web Services

    I'm using AMS 5.0.1 on AWS. I would like to create my own customized AMI - I would like to configure the 'stock' AMI to my liking and then create a new AMI from that customized server.
    I've tried some methods that I found to try to create a new AMI but I'm running into problems. It seems that I can't create a new paid AMI from and existing one.
    This is the error:
    Machine image ami-XXXXXXXX and kernel image aki-XXXXXXXX have incompatible product codes.
    I tried to inject the product code using;
    ec2-modify-image-attribute ami-XXXXXXXX --product-code XXXXXXXX
    but got this error:
    Client.AuthFailure: Not authorized for image:ami-XXXXXXX
    This is a critical issue for me, I need to be able to automatically create AMS instances within AWS. If anyone can point me in the right direction I would really appreciate it.
    Another option would be to persuade Adobe to create some slightly modified AMI's for public use?

    Thanks for the comment. It turns out that you can't just apply product codes unless you are a registered developer, among other things. And I think you are right that Adobe probably won't do anything special for me. This approach is definitely not possible at this time.

  • Minor_init failed for module... & unable to configure nics

    Hello,
    following the instructions of: "Sun Two-Node Cluster How to Guide"
    I successfully installed the "Sun Cluster 3.1U4" on my sun ultra 5 workstations (on the two nodes and on the administrative console), which are all running solaris 10 1/06.
    During the installation process I choose the option "configure later" as suggested by the guide.
    Before configuring the nodes and proceeding with the steps, I wanted to check the correct installation of the nics. I have three nics plugged in the two nodes and two in the administrative console. One per computer is integrated, the others are three pci 10/100 Ark and two Intel nics.
    The fact is that the output of dladm show-link is just hme0 for all the computers, none of the other nics seems to be recognized.
    in the output of prtconf I see
    pci instance 1 ethernet (drive not attached) ethernet (driver not attached)
    instead with prtconf -D
    pci instance 1 ethernet ethernet (driver simba)
    this is the output of one of my nodes that has two Ark nics.
    I tried with devfsadm -v (as I read in a post) and the output is
    minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
    this string also appears at every boot (also when I boot -r)
    This last thing I found treated as a problem in "sun java enterprise administration guide":
    this is like my situation, but of course I am not running solaris on an x86 system, and I also do not receive "NOTICE NO PCI PROB"
    x86 machines running Solaris 10 fail to come up in cluster mode due to changes made for the Solaris boot architecture project. The following error messages are displayed when the machine boots up:
    NOTICE: Can�t open /etc/cluster/nodeid
    NOTICE: BOOTING IN NON CLUSTER MODE
    NOTICE: NO PCI PROP
    NOTICE: NO PCI PROP
    Configuring devices.
    Hostname: pvyom1
    devfsadm: minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
    Loading smf(5) service descriptions: 24/24
    /usr/cluster/bin/scdidadm: Could not load DID instance list.
    Cannot open /etc/cluster/ccr/did_instances.
    Not booting as part of a cluster
    /usr/cluster/bin/scdidadm: Could not load DID instance list.
    Cannot open /etc/cluster/ccr/did_instances.
    Note: path_to_inst might not be updated. Please �boot -r� as needed to update.
    Solution Perform these steps:
    1. Add etc/cluster/nodeid to /boot/solaris/filelist.ramdisk.
    2. Enter these commands:
    # bootadm update-archive
    # reboot -- -r
    I did not perform the steps indicated as the "solution" for this.
    I wait because maybe the scinstall configuration can fix this, doesn't it?
    I just want to end my two node cluster config happily and begin to work with it.
    Thanks in advantage,
    Francesco

    The primary problem you seem to have is that your network adapters are not recognized. So this is not a Cluster problem. You talk about "three pco 10/100 Ark and two intel nics". The question is, if those cards have a corresponding solaris driver. Since you seem to indicate that prtdiag does report that there is no driver attached, you may be out of luck for the drivers coming with Soalris 10 01/06 you use. Maybe the vendor of those cards offers drivers that need to get installed?
    Otherwise I guess you are out of luck using them, without finding a usabel kernel driver.
    For the message
    minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
    you see, this is harmless and not your problem. You can ignore it.
    This error happens when the scmd_link devfsadm link module is attempted to be
    loaded before clustering has started. It is a harmless situation.
    Greets
    Thorsten

  • Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMAZON: The maximum number of addresses has been reached.

    Hi All,
    I was trying to create Instance for SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] in SAP HANA Enterprise Cloud / Cloud Appliance Library when I got this message 'Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMASON: The maximum number of addresses has been reached'.
    I tried looking for an answer or solution for this issue but no success.
    Can anyone please help me with this?
    Regards,
    Deep Tanwar

    Hi Deep,
    you need to check your Elastic IP limits within the AWS console and how to release them if they are used:
    Elastic IP Addresses (EIP) - Amazon Elastic Compute Cloud
    AWS Service Limits - Amazon Web Services
    Regards,
      Hannes

  • After effects warning: Audio conforming failed for the following file:___________.cfa. Perhaps due t

    After effects warning: Audio conforming failed for thefollowing file:___________.cfa. Perhaps due to disk space.
    I am working on a project for an internship and I am editing a video I had the video files working and then I started doing some editing and animations for the video  and now for some reason when I open the file into AE I get this message so I tried starting over same message when I import the video files.

    I had this problem after converting some MPG's to avi's... the resulting filenames were 'foo.MPG.avi' ... the error message only seemed to indicate it was foo.MPG, so AE thought it was a MPG container type by parsing wrong, when it wasnt. i renamed all my files to just the avi, like 'foo.avi' and then imported into AE and it worked, no errors.

  • Get-splogevent Correlation ID, login failed for "Edit My Profile" in My Profile Error An unexpected error has occurred

    Hello Community
        Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
    Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully. 
    I was able to  understand Event Viewer logs, there was supposed to be 4 possibilities
    one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
    I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
    the error still occurred.
        Then I used a Powershell command that displayed output but the Output doesn't make sense
    because it is saying the login failed associated with the database that was created by the Search
    Service application when it was created.
        But  how can that username be related to the Search Service database?  Below is the output:
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Site=/
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880i
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.     at System.Data.SqlCli
               ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlCli
               ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser
               .Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
               opyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
               in(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
               Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     a
               t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
               directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
               onString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient
               .SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
               ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sy
               stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
               derInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionF
               actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
               ons)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.
               Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderB
               ase.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFa
               ctory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCo
               nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.S
               qlConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880k
    Message  : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
               eryData monitoringData, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
               er(SqlCommand command, Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.Schema
               Database.GetSchemaHighLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
               Time()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
               appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Admin
               istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     a
               t Microsoft.Office.Server.UserProfiles.Co...
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
               e login failed.'    Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
               eNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Login failed for user Server1\User1.'    Source: '.Net SqlClient Data Provider' Number: 18456
                State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : tzku
    Message  : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
               7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15'    ConnectionState: Closed ConnectionTimeout
               : 15
    Area     : SharePoint Foundation
    Category : Runtime
    Level    : Unexpected
    EventID  : tkau
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.    at System.Data.SqlClie
               nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClie
               nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.
               Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
               pyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
               n(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
               nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     at
                System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
               irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                 at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
               nString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient.
               SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
               ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sys
               tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
               erInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionFa
               ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
               ns)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.D
               ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderBa
               se.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFac
               tory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCon
               nection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.Sq
               lConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()     at Microsoft.Office.S
               erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
               a, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
               , Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
               hLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime()     at Microso
               ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
               nID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Administration.UserProfile
               ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     at Microsoft.Office.Se
               rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName)     at Microsoft.Office.Server
               .UserProfiles.CoreProperty.get_ManagedPropertyName()     at Microsoft.SharePoint.Portal.WebControls.ProfileP
               ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
               prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch)     at Microsoft.SharePoint.Porta
               l.WebControls.ProfileUI.LoadProfileTable()     at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
               rol(Object sender, EventArgs e)     at System.EventHandler.Invoke(Object sender, EventArgs e)     at System.
               Web.UI.Control.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control
               .LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()
                  at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.U
               I.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
               , Boolean includeStagesAfterAsyncPoint)
    Area     : SharePoint Foundation
    Category : Monitoring
    Level    : Medium
    EventID  : b4ly
    Message  : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
        What does that username have to do with the database created by Search Service Application creation
    and why can't I "Edit my profile" in My Profile?
         Thank you
         Shabeaut

    Use Netmon to analyze the traffic and understand more on same
    Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
    Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
    or mysite
    http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
    add the SQL Server details into the hosts file on the WFE server.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
     Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
    If this helped you resolve your issue, please mark it Answered

  • NiBuf3Listen failed for host

    Hello all,
    can you pls suggest me smth for this:
    [Thr 139692102760192] *** ERROR => IcmBindService: NiBuf3Listen failed for host host(ip):port (rc=-16): NIEMYHOST_VERIFY [icxxserv_mt. 2777]
    [Thr 139692102760192] *** WARNING => Could not reactivate service (rc=-1) HOST=host,PORT=port,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=600 [icxxserv_mt. 1563]
    [Thr 139692102760192] *** ERROR => ICP_icm_mod_service: ModService(7) failed for port, HTTP(rc=-1) [icrxxadmin_m 5526]
    I want to activate services in web dispatcher for java systems.
    Thx
    Chris

    Hi Chris ,
    If  the port used is less than 1024  then make sure that you have set the correct permissions as in the following note
    2117815 - ICM / Web Dispatcher: icmbnd using sudo - port restrictions for icmbnd
    2089881 - ICMBND NiIBindSocket failed (13: Permission denied)
    Thanks ,
    Manu

  • Web Start client for two Web Services

    Hello.
    I wrote a client application that uses two different web services.
    Both web services are created using Basic Authentication. They have different user_names and passwords, but must be deployed on the same application server. I must invoked methods of these web services one after another.The problem occures when I invokes mehods of second web service. No matter which of service would be first or second. The problem occurs on second calling. I got this exception:
    EXCEPTION: java.rmi.RemoteException: HTTP Status-Code 403: Access to the requested resource has been denied; nested exception is:
         HTTP Status-Code 403: Access to the requested resource has been denied
         at com.softlets.insurelet.security.InsureletSecurityServiceSEI_Stub.login(InsureletSecurityServiceSEI_Stub.java:89)
         at com.softlets.insurelet.test.TestRefundPolicy.main(TestRefundPolicy.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    IMPORTANT: Everything worked fine until I started to install this application using Java Web Start.
    MY ASSUMPTION: It's likely to me that web start executes my application in some environment where it caches the first web service's username and password and applies it to the second web service. Because, if I run both web services on my local machine and set ENDPOINT_ADDRESS_PROPERTY to different values (first - localhost:8080, second - 192.168.0.21:8080) everything works fine.
    CODE FRAGMENT:
    public static void main(String[] args) {
    try {          
    String user = "test"; String pass ="test";
    String host = "http://192.168.0.21:8080/insurelet-p/insurelet_p";
    Stub stub = (Stub)(new Insurelet_policies_Impl().getInsureletPoliciesServiceSEIPort()); stub1._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY, host);
    stub._setProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY, user);
    stub._setProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY, pass);
    InsureletPoliciesServiceSEI ws = (InsureletPoliciesServiceSEI)stub;
    String officeid = "test1"; String operatorid = "test2"; String mct = "1";
    // FIRST WEB SERVICE CALLING
    boolean result = ws.makeRefund(officeid, operatorid, mct);
    String suser = "test"; String spass ="test";
    String shost = "http://192.168.0.21:8080/insurelet-s/insurelet_s";
    Stub stub1 = (Stub)(new Insurelet_security_Impl()).getInsureletSecurityServiceSEIPort();
    stub1._setProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY, suser);
    stub1._setProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY, spass);
    stub1._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY, shost);
    InsureletSecurityServiceSEI ws1 = (InsureletSecurityServiceSEI)stub1;
    // SECOND WEB SERVICE CALLING
    OperatorTO to = ws1.login("softlets", "admin", "admin"); // EXCEPTION
    ENVIRONMENT: Both web services are deployed in a single enterprise application on Sun Java System Application Server 8.1.
    Java version: 1.5..0_02

    In case anyone's search leads them here, I've posted the solution at:
    *[http://www.pby.com/general.nsf/webarticles/dominowebservice01]*
    It is an exhaustive article (not "Hello World"!) that goes through several versions of the web service and client - hopefully explaining all* pieces of the puzzle:
    ~ web service code,
    ~ WSDLs
    ~ schema
    ~ thoroughly-documented clients that do and do not use JAXB
    ~ ... that use generated artifacts
    ~ ... that customize existing POJOs
    ~ the SOAP messages generated in each direction
    ~ the necessary JAXB annotations
    ~ explanations of how the code works
    ~ explanations of how namespaces affect the code
    ~ on and on and on...
    My constant goal was to write an uncomplicated solution that uses as few artifacts (two) and annotations as possible. The end result is a small, fast JAX-WS 2.0 client that uses JAXB to invoke and consume a secured Domino 7 (1.4.2 JVM + AXIS) web service, using RPC/literal SOAP messages.

  • Error when generating Web Services Proxy for SCA Application Module

    Hello,
    I'm trying to create Web Services for a simple Application Module with JDeveloper 11g (11.1.1.3.0).
    I start a new ADF Project, I create an Application Module as simple as possible : it contains only a simple View Object on the DEPT Entity.
    On my Application Module, I choose "Service Interface" and I add my View Object in the service interface.
    I test my Web Service in the Embedded Weblogic Server, it works well. (I succeed in using the Get operation, for example).
    But when I try to generate a Web Service proxy (right-click on the WSDL File -> Generate Web Service Proxy), It always fail with such errors :
    oracle.jdeveloper.webservices.tools.WsdlValidationException: Error creating model from wsdl "file:/C:/JDeveloper/mywork/ApplicationAppelServiceSCA/Model/src/model/common/AppModuleService.wsdl": 'unset' is already defined'Bytes' is already defined'ref' is already defined'Duration' is already defined'Types' is already defined'Character' is already defined'type' is already defined'Day' is already defined'nestedInterfaces' is already defined'Date' is already defined'datagraph' is already defined'Type' is already defined'Integer' is already defined'ModelsType' is already defined'ChangeSummaryType' is already defined'instanceClass' is already defined'Month' is already defined'DataObject' is already defined'javaClass' is already defined'LongObject' is already defined'DateTime' is already defined'dataObject' is already defined'YearMonth' is already defined'ShortObject' is already defined'Long' is already defined'types' is already defined'JavaInfo' is already defined'IntObject' is already defined'Boolean' is already defined'DoubleObject' is already defi...
    Can someone help me to understand this error ?
    i never manually edited the WSDL File, so I don't understand why the generated WSDL or XSD files might contain errors.
    Thanks for your Help,
    Laurent

    We have the same problem, and the problem was in the xsd import:
    The wdsl import a schema that import other schema, the second import use a relative path, that was wrong.
    So check the xsd import sequence....

  • Web Service Response issue for some Requests

    I have a WebService deployed on Oracle Application Server and it's an HTTPS connection. I am facing a small issue and can't figure out
    what's going on. For each request there's a response returned. Sometimes the comsumer does not get the response back even though the request
    is successfully processed and response generated but some how it never makes it to the consumer.
    Here is the signature of the function:
    public Element parseData(Element data) throws RemoteException;
    --------------------------------------------------------------------------------And I can't figure out why a consumer does not receive a response back for some of the requests. Any ideas what might be wrong or how to
    debug this issue. Is there any place I can look to see for each request is a response going back. I don't know if it's related Network or
    App. Server and where to start to debug this. As looking at the logs of my Web Service I do see all the requests being processed and response
    being generated but some how it never makes it to the consumer. It normally takes arround 5 to 10 seconds to process each request and most
    of time multiple requests may be being processed.
    Any help is appreciated.
    Thanks

    Hi there.
    If the consumer of your service is a .NET client, it will silently ignore any response that is not formated as advertize in the WSDL and will return an empty object to the caller. As you are trying to use raw XML Element, it seams to be a potential explaination.
    If you can turn off SSL in your test environment, you may want to run a TCP sniffer tool, on the host where your server is running. You can setup a filter on the IP @ of the consumer or the TCP port of the service comsumed. I'll recommend you look at ethereal as it's a cross platform utility.
    Hope it helps.
    Eric

  • Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR

    Problem Description:
    I'm following the steps as per the doc:
    http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
    to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
    WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
    Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
    The code from oracle form to call web service is as below:
    DECLARE
    jo ora_java.jobject;
    rv ora_java.jobject;
    ex ora_java.jobject;
    outString varchar2(2000);
    BEGIN
    jo:= CurrencyConvertorStub.new;
    --This will get the exchange rate from US Dollars to UK Sterling.
    rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
    message (float_.floatValue(RV));
    EXCEPTION
    WHEN ORA_JAVA.JAVA_ERROR then
    message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
    WHEN ORA_JAVA.EXCEPTION_THROWN then
    ex := ORA_JAVA.LAST_EXCEPTION;
    outString := Exception_.toString(ex);
    message(outString);
    END;
    Any help/ideas on this is greatly appreciated. Thanks.

    Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
    WHEN ORA_JAVA.JAVA_ERROR then
    message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
    Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
    public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
    URL endpointURL = new URL(endpoint);
    Envelope requestEnv = new Envelope();
    Body requestBody = new Body();
    Vector requestBodyEntries = new Vector();
    String wrappingName = "ConversionRate";
    String targetNamespace = "http://www.webserviceX.NET/";
    Vector requestData = new Vector();
    requestData.add(new Object[] {"FromCurrency", FromCurrency});
    requestData.add(new Object[] {"ToCurrency", ToCurrency});
    requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
    requestBody.setBodyEntries(requestBodyEntries);
    requestEnv.setBody(requestBody);
    Message msg = new Message();
    msg.setSOAPTransport(m_httpConnection);
    msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
    Envelope responseEnv = msg.receiveEnvelope();
    Body responseBody = responseEnv.getBody();
    Vector responseData = responseBody.getBodyEntries();
    return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
    }

Maybe you are looking for

  • How to adjust the path of a tween using actionscript

    I'm a novice at Actionscript3 and would greatly appreciate an answer to what seems like a simple question: Here's my project: http://home.comcast.net/~samiri/director/mortals/amadoFlashPortrait/index.htm Click on the gray scale frame images. A larger

  • Urgent help with Nokia 208 Dual SIM

    Hi all, I have a new Nokia 208 Dual SIM type RM-949 (English & Chinees). I wish to install Hebrew on it but I can't find an appropriate firmware. Does anyone knows if there's such version around the net? Can I install the RM-948 instead? Will it supp

  • Safari crash in text box: 100% reproducible

    Since yesterday Safari has been crashing several times an hour. More often than not, the browser crashes when I type in a text box input field. For example, as soon as I type the first letter in the title field of this post Safari will crash. This is

  • How do I view/generate the shuffle playlist?

    I just downloaded itunes 11 & when I hit the shuffle command it jumps from song to song unpredictably. In the earlier versions, when you hit the shuffle command the playlist would automatically shuffle and you could see a new order of the songs seein

  • CVI/Excel file format 2 *.TDMS format

    Does anyone has plugins to convert Excel/CVS file format into *.TDMS  format?  Instead of write a CVI or LabVIEWS application.