Start form in ENTER-QUERY HST6i DES6i

Does any-one know this problem?
We want to start an generated form Called by the menu or by an other form in ENTER-QUERY. We have tried to use the named passes values but that didn't have any effect. What are we doing wrong?
null

Theo et al.
First, although you can enter NPV's and APV's against a module network link between a menu and form module, it will not be picked up by the generator. See the Headstart User Guide (and the example in the Headstart Demo application) for instructions on how to implement this very example (launching a form in ENTER QUERY mode from the menu).
Between forms, the NPV should be picked up correctly, as the Inter Form Navigation screen in the Headstart Demo application will demonstrate. In both cases it will therefore not be necessary to create the CG$STARTUP_MODE parameter manually.
A couple of general remarks concerning the use of NPV/APV: most values are case sensitive, and more often than you'ld think you are required to generate both the calling and the called form for the functionality to be implemented correctly.
Kind regards,
Peter Ebell

Similar Messages

Starting form in Enter-Query mode disables some buttons on Smartbar

Whenn I run a form (on the Web) which starts in Enter-Query mode, the buttons "Execute Query" and "Enter Query" are disabled on the Smartbar. Also the corresponding menu options are disabled. Besides, it is psossible to use the appropiate keys (in my case: F7 and F8).
Has anyone experienced the same problem and is there a solution?
Let me know.
Thanx

Frank: Thats what i thought too -but i saw (in other Sources) that it could be done, but how..
Eugeniy I Duzhinskiy:
So, many Thanks to you. It works fine !!!!
(Its great to see there are some other Forms Users out there :) )

Calling form in Enter-Query mode

Hi
how can i Have a form called from the menu (generated with
headstart) start in Enter-Query mode ?
Is there any method to do this easily ??
TIA
Olivier
null

Olivier,
Look in the Headstart Template Package users guide. In the
Runtime Behaviors chpt, under Inter-Form Navigation, Named Passed
Values and Argument Passed Values, you will find an explanation
of how to start a form in Enter-Query mode.
Regards,
Lauri
Olivier GIBERT (guest) wrote:
: Hi
: how can i Have a form called from the menu (generated with
: headstart) start in Enter-Query mode ?
: Is there any method to do this easily ??
: TIA
: Olivier
null

FRM:41361 Cannot navigate out of form in 'Enter Query Mode'

Hi,
I am using a master - detail block in my form.When I query the master block I am getting this error message
FRM:41361 Cannot navigate out of form in 'Enter Query Mode'
I have given DO_KEY('ENTER-QUERY') in WHEN-NEW-BLOCK-INSTANCE trigger of master block.
and in property palette of Master block I have given the next navigation block as Detail block.
According to the value which is queried in Master Block the Detail block should be populated.
My form should open in 'Enter Query Mode'.This problem always happens from second time onwards
I open the form.When I open the form first time this problem is not occuring.
Can anyone suggest a solution for this
Thanks,
Nasiya

Have you written a Key-EntQuery trigger at the Master block or the form level,
If yes, then can you put that code here.
The NEXT-NAVIGATION-BLOCK is only used for navigation when you use a next-block built-in on a key-trigger.
Have you written a ENTER-QUERY command on any trigger that fires prior to the said WHEN-NEW-BLOCK-INSTANCE trigger?
If yes, then thats the reason that the first time you run the form, your form is in ENTER-QUERY mode.
Also, maybe execute on enter-query fails and hence the blocks are not getting populated.
Also, ENTER-QUERY is always on a single block. And while the block is in enter-query mode, navigation out of that block is prohibited.
you have to either have a successful EXECUTE-QUERY or use:
EXIT_FORM(NO_VALIDATE) to come out of ENTER-QUERY mode.

FRM-41361 Cannot navigate out of current form in Enter-Query Mode

Hi All,
I am getting the FRM-41361 error in the bottom message area when opening a form from the function navigator. The issue does not exist when opening the form from the application homepage. The form is loaded in enter-query mode, and the enter_query command is in the WHEN-NEW-FORM-INSTANCE trigger. I have checked all triggers that fire after this point for any type of navigation but do not see any. The interesting thing is, if I put a fnd_message.set_string and fnd_message.show just before the enter_query call to debug, the issue goes away entirely.
Is it possible there are security triggers firing after the form is loaded into enter-query mode that could be causing this and that the fnd_message calls are indeed buying time for those triggers to complete before the enter_query call?
Any help/advice is appreciated. Thanks!
Dan

Yes, when I looked through the triggers I made sure to look for go_block and go_item calls as well as any calls to leave the form.

Open APPS form in enter-query mode

Hello all
apps version 11.5
i've created a shourtcut link that opens a specific apps form on specific responsability like
http://<server_name>:8001/OA_HTML/RF.jsp?function_id=4893&resp_id=50239&resp_appl_id=551&security_group_id=0&lang_code=US
the problem now that i want to send parameters for this form and execute query on this parameter
so
is there a way to open apps form and send parameters then execute-query directly from shourtcut or link created on the desktop ?
Respectfully
Khaled Farouk

Hello all
after along of search i'm so neear of the answer but i need some assistant from experts.
i've reached this link which open a form and query on the data i need .
http://<server_name>:8001/OA_HTML/RF.jsp?function_id=1634&resp_id=50244&resp_appl_id=-1&security_group_id=0&lang_code=US&params=U-iFUMNeed-3nkNG7BzN1Qr5evq7vJslGk3i3pf0ggqqSfgqDmLrk-JON9n4DZe6jMkSYPz2nfRW6va3P0GqgNlHfEu8pw6EWDZNq-MSgU1WFM5Qux.dsjTAX5J3jwjn&oas=_vSHxhm0ru79y-0HO91I_Q..
but i'm still have a problem. how to change the parameter part? because this link is generated from the oracle Apps
i want to change this part
&params=U-iFUMNeed-3nkNG7BzN1Qr5evq7vJslGk3i3pf0ggqqSfgqDmLrk-JON9n4DZe6jMkSYPz2nfRW6va3P0GqgNlHfEu8pw6EWDZNq-MSgU1WFM5Qux.dsjTAX5J3jwjn
thank all
wiiling to have answer
Respectfully
Khaled Farouk

Starting a Search Form in "Enter Query" mode

JDev 11.1.1.3 Windows 7 x64
I have a page flow with 4 fragments - the first is a search form to look up the person.
I need to enter this form in the "Find Mode (enabled)".
I have tried using the method of dragging the "Find" from the iterator as the default item and linking it to the first fragment but this has no effect (it still retrieves the first record from the DB).
I created an invokeaction - (preparemodel) this works for the first time - but not any other (seems to block the execution of the find button).
I am not sure if this is a bug in 11g - but in my mind (find.execute) seems to indicate that it is doing what it should.
I am not inserting any data - just retrieving a record.
Anyone solve this before?

Hi,
maybe this will help you
http://dstas.blogspot.com/2010/05/master-view-search-form-display-only.html
Regards,
Dimitris.

10g Form - first execute query - very slow

I have the following issue:
Enter an application
open a form in enter query mode
first time execute query is very slow (several minutes)
every other time it's quick (couple seconds or less)
I can leave the form, use other forms within the app, come back and query is still quick. It's only the first time after initially launching the app.
Any ideas what might be causing this?

We have the same application running in 6i client/server DB-9i in production. We are testing the upgraded application that is 10g forms on OAS DB-10g. We don't have the issue in the current production client/server app.

Forms that start in enter query mode freeze on exit

When a headstart form is called from
a menu and the first thing it does if go into
enter query mode the form will not exit properly, causing the orginal form to hang.
Is there any work around for this apart from taking enter_query out of the when_new_form_instance trigger ?

We have a similar problem with a Headstart generated application. We are unable to pinpoint it entirely to forms that start in enter query mode as:
a) forms that don't start in enter query mode also hang; and
b) not all forms that start in enter query mode do hang.
The problem doesn't seem to affect a form consistently, as one day it will hang on the first use, the next it will work for several hours.
When a new form is selected from the menu the toolbar is not shown, the 'start' form disappears and the application hangs. It is then necessary to close the application using Task Manager.
The good news is that this only seems to happen in our development environment (Windows NT 4) and not in our live environment (Hydra).
We are working with Headstart v2.1.2.0.1,
Designer v2.1.24.1.0 and Forms v5.0.6.11.0.

Hotkey "Create Record" while the form is in enter-query-mode

pressing the hotkey F6 for create-record while the block is in enter-query-mode results in the error - message:
Function key not allowed. Press Ctrl+F1 for list of valid keys.
The error-occurs although I created a trigger KEY-CREREC. The trigger isn't executed
In older Forms versions the behaviour was different. Is there a way to let the form work like in the old versions?

thnx for reply.Problem not solved.
i m trying to assign the value of text item to a variable in pre-query trigger. i m able to get the value into variable when the string in the text item does not startwith <,>,=. but when the string starts with any one of the operator (<,>,=) it gives error.
lenth of variable is 1000 charaters, and text item's max leanth is just 4 charactres.

How to display LOV on web in ENTER-QUERY mode with form or block query only.

Hello all
How can I display lov automatic on the web in from enter-query
mode in form or block query only mode.
thankx

If I understand correctly your explanation, your called form
fails to activate the LOV in enter-query mode when it is deployed
and test on the browser.
So lets proceeed like this, to make it work in all environments,
let us programetically activate the LOV.
HOW?
In the called form, write in the WHEN-NEW-ITEM-INSTANCE TRIGGER
at block level (if have more than one LOV)
IF :SYSTEM.MODE = 'ENTER-QUERY' THEN
IF get_item_property(:system.cursor_item,lov_name) IN ('YOUR
LOV1', 'LOV2' etc) THEN
IF SHOW_LOV(get_item_property(:system.cursor_item,lov_name))
THEN
NULL;
END IF;
END IF;
END IF;
The above code maybe tweak to suite your need and condition.
This way, we explicitly make the LOV appear in ENTER-QUERY mode
whenever the user clicks on an item with an attached LOV.
Hope this helps.
Mohammed R.Qurashi

How to form an Endeca query where a field must start with certain letters

hi, Is it possible to form an Endeca query to retrieve a field that must start with certain letters? Say like get all users who's first letter is 'A' ? I checked with Range filters but it is supporting only numerical fields as well as Wild card search. But nothing worked well so far. any suggestion?

Yes. Here's the gist of how it works:
Typeahead is commonly implemented by enabling wildcard search on one or more Dimensions. An AJAX query is sent out containing the beginning of a search term. A controller in the app layer answers that AJAX query and formulates an Endeca Dimension Search query. It sends that off to the Endeca MDEX engine. Endeca responds with relevant Dimension matches. The controller returns these to the client who made the AJAX request. They are rendered as hyperlinks that lead to a particular navigation state in the catalog.

How to implement enter-query , execute-query in Apex Forms

Hi,
I am new to Oracle Application Express. I want to know what is the equivalent of ENTER-QUERY and EXECUTE-QUERY features of Oracle Forms in Oracle APEX? I saw a lot of documentation, but everywhere I found that APEX forms only have 3 database actions, (1) INSERT (2) UPDATE & (3) DELETE.
Does anybody know how we can do QUERY in APEX Forms? (like we do in Oracle Developer Forms).
Thanks in advance.

Oracle APEX is a web/ stateless environment. So you do not have the same functionality/ features as in a Oracle Forms environment which is session/state oriented.
You can however achieve functionality similar to Enter Query / Execute Query through other means.
The easiest is to use the Forms with Report wizard. It creates 2 pages, the first one is a report and the other a Form. Clicking on the Report rows takes you to the Form page in Edit mode where as the the Create button takes you to the Form in Insert mode.
If you want to have the enter-query / execute query on a single page it will require significant effort and skills. Try it when you have acquired some more skills in Apex.
In APEX , like any other web application, you have to think in the web paradigm and not client-server. Even Forms 11g is essentially client-server like and is session oriented through the forms applet.
Regards,

Open multiple forms, few in Enter-Query mode

Hi All,
I want to open multiple forms from a form using open_form built-in. If user clicks on different items of the parent form different child forms are invoked.
But if one child form is opened in Enter-Query mode (I have 'enter_query;' in its when-new-form-instance) it does not allow to put focus back on parent form and invoke other forms until I execute_query in child form or close the child form.
Waiting for your replies. Thanks in advance.
Regards
Mona

Hi Friends,
Has anybody ever faced this problem. Please reply.
Regards

Form trigger - fire in enter query mode

Hello,
Could someone help me with the following problem, please?
I want to create an key-exeqry and I want it to execute in enter-query mode. Unfortunatly Designer set's the property 'fire in enter query mode' for the trigger to 'No'. I can't find any setting to set it to 'Yes'. Does someone knows a setting or a work-around?
I'm working with designer6/headstart6.
Thanks in advance,
Martine.

Sandra,
I tried to put the key-exeqry in the template. There's only one problem the key-exeqry is a 'in place of' trigger. When I put the code 'Null;' in the trigger, a generated form without a key-exeqry doesn't work because the 'key execute query' does nothing. A generated form with a key-execute query works fine.
At the other hand, when I put the code 'Execute_query' in the trigger, a generated form without a key-exeqry works fine, but the other one doesn't.
Which code should I include in the template-trigger?
Thanks,
Martine.

Start form in ENTER-QUERY HST6i DES6i

Similar Messages

Maybe you are looking for