Start Help Topic Window in Dock mode

I'm new to OHJ and converting a documentation from JavaHelp to Oracle Help Java.
I wonder how it is possible to open the Help Navigator together with the Topic Window docked? By default there is now Topic Window when oracle.java.Help is shown with "showNavigator". I would like to have it docked with an introduction page. How do I do that?
Thanks for any help!

The following error has nothing to do with running in debug mode?
It just means that there's another process already binded to port 8320
you might want to see the output of netstat -a
BTW, what flags you switched on to run the server in debug mode?
Kumar
"Mark" <[email protected]> wrote in message
news:3c951474$[email protected]..
>
Hi there
Any clues/suggestions are greatly appreciated.
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address already inuse
Perhaps another process is using port 8320.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Notice> <WebLogicServer> <SSLListenThread listening on port 8321> <Mar18, 2002
7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic Server isno
longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system> <Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert><WebLogicServer>
<The shutdown sequence has been initiated.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Info> <WebLogicServer> <Server shutdown is commencing NOW and isirreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable toload
performance pack, using Java I/O. java.lang.ThreadDeath atjava.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764) atweblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171) atweblogic.Server.main(Server.java:35)
>
>

Similar Messages

How to start emctl in windows in silent mode.

hi all,
I need to create a bat file on windows with the below commands.
d:\orainf\bin\oidmon start
d:\orainf\bin\oidctl server=oidldapd instance=1 start
d:\orainf\dcm\bin\dcmctl start
d:\orainf\bin\emctl start
d:\ora9iAS\dcm\bin\dcmctl start -co OC4J_BI_Forms
d:\ora9iAS\dcm\bin\dcmctl start -co "HTTP Server"
But the problem is the "emctl start" does not come out of the command prompt and I have to do a Ctrl+C to execute the next set of commands. But the same command works in silent(non interactive) mode in Unix.
Can anyone help me with this?
thanks in Advance
Bijesh

hi Chris,
I think you are right. It is not a good idea to override normal start.
But in my case, if I use a start, I will not have control over the process and How will I know whether my emctl has started successfully before starting the next process?
regards
Bijesh

Scrollwheel does not work in Topic Window

I have installed Oracle Help for Java 4.2.7. When I open a helpset in the Help Previewer, I notice that the scrollwheel does work in the Help Navigator window, but does not work in the Help Topic window. Is this a bug or is there something I can do so that the scrollwheel works in both the Help Navigator and Help Topic windows?
Thanks in advance,
Marc Norman
Prefix

Hi Marc,
What JRE/JDK are you using when you run the previewer? When I install OHJ 4.2.7, and run it using Sun JDK 1.4.2 on Windows XP the scroll wheel works for me in both the help navigator window and the help topic window.
If it doesn't work for you, please provide me with some more details about your environment, so I can track the issue down.
Also, I apologize for the lengthy delay between your post and when it appeared in our forum. We had some issues with the forum moderation, that we hopefully have worked out.
Regards,
Jeffrey Stephenson
Oracle Help Technologies

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Oracle 10.2G - windows service started but instance is in nomunt mode

Hello
I have trouble with oracle 10.2G in windows 2003...
I run following command:
oradim.exe -startup -sid sid_name -usrpwd pass -starttype srvc,inst
After above command, windows service has status "started", but instance is in nomunt mode.
In alert.log I don't see any error...
Thanks for any help.
Regards

in oradim.log I found following error:
Tue Dec 18 05:00:02 2007
ORA-01017: incorrect username/password; logon refuse
but I don't change any password...
This is my alertlog:
Tue Dec 18 05:00:01 2007
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1468M/2047M, Ph+PgF:3527M/3947M, VA:1940M/2047M
Tue Dec 18 05:00:01 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\ora102\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
resource_limit = TRUE
shared_pool_size = 209715200
shared_pool_reserved_size= 20971520
trace_enabled = FALSE
nls_language = POLISH
nls_territory = POLAND
nls_sort = POLISH
sga_target = 838860800
control_files = D:\ORACLE\ORA92\DATABASE\CONTROL01.CTL, D:\ORACLE\ORADATA\TETA\CONTROL02.CTL
db_block_size = 8192
compatible = 10.2.0
db_files = 100
db_file_multiblock_read_count= 8
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = ROLLBACK_DATA
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TETA
session_cached_cursors = 100
job_queue_processes = 5
parallel_min_servers = 0
parallel_max_servers = 0
background_dump_dest = D:\ORACLE\ADMIN\TETA\BDUMP
user_dump_dest = D:\ORACLE\ADMIN\TETA\UDUMP
core_dump_dest = D:\ORACLE\ADMIN\TETA\CDUMP
db_name = TETA
open_cursors = 2048
star_transformation_enabled= FALSE
pga_aggregate_target = 157286400
workarea_size_policy = AUTO
aq_tm_processes = 1
PMON started with pid=2, OS id=291912
PSP0 started with pid=3, OS id=142740
MMAN started with pid=4, OS id=656244
DBW0 started with pid=5, OS id=652136
LGWR started with pid=6, OS id=755832
CKPT started with pid=7, OS id=226276
SMON started with pid=8, OS id=661212
RECO started with pid=9, OS id=467040
CJQ0 started with pid=10, OS id=157796
MMON started with pid=11, OS id=249832
MMNL started with pid=12, OS id=795116
Tue Dec 18 05:00:02 2007
Oracle Data Guard is not available in this edition of Oracle.
Regards

Configurable alternate windows for help topics

Greetings,
We'd like to be able to sometimes open a help topic in an alternative window in certain scenarios, but other times resuse the current window, with the new help topic replacing the currently viewed topic. Currently you can only have one or the other as the window type association is defined in the map file, for example:
<map>
<mapID target="topic_3" url="file_3.html" wintype="intro" />
<mapID target="topic_5.tsk" url="file_5.html" wintype="task" />
</map>
We'd like to specify the window type within the
so that depending on the context, the topic would display in the original window or in a new
window. For example,
Getting Started
Is this possible with the current versions of OHJ and OHW? If not, can it be considered as a enhancement request?
thanks,
Elizabeth Dyer.

Hi, Elizabeth,
How about you just define multiple topic id's pointing to the same url but with different window types? The syntax
Getting Started
will not currently work in OHJ (and window types are totally ignored in OHW). We can keep it in mind as an enhancement request, but in all honestly, it probably won't be implemented for a long time.
- Ryan

Dock mode? HELP

My phone keeps going into Dock Mode. I have disabled car mode, pulled out the battery, tried to clean out the plug for the charger. It makes all my calls go to speaker phone, closes apps and texts when I am in the middle of using them and just makes my phone pretty much unusable. And now it randomly keeps shutting all sound off, but says its in normal mode so I miss tons of calls.
I have only the the phone for 4 months and I'm ready to throw it out the window. Any help?

Hi megmza, Let's get your phone back to normal! Can you clarify your current software version? Menu>Settings>About Phone>Software information. Do you typically use a car charger? If so, was this a charger purchased from Verizon Wireless? I am eager to troubleshoot and get this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

Opening Help Topic in a New Window

I'm posting this inquiry after searching the forum for the above topic. I have a client who requires that a contextual help page be opened in a new browser window when users press F1 in a web application screen. The client does not want help opened in a new tab or in the same window as the web application screen.
The web application for which I'm writing help supports only Internet Explorer, versions 7 through 9 (no other browsers). The client programs in .NET and, for security, handles HTML help pages like .aspx.
I have RoboHelp HTML 9 installed. Contextual help mapping is done with an external XML schema that pairs web application screens with target help topics via F1.
In practice, despite the new-window requirement, testers have found that CSH opens differently with different combinations of browsers and operating systems. With Windows XP - IE 7 & 8 and Windows 7 - IE9, when the user presses F1, the help screen is opened in a new tab. In Windows 7 - IE8 (32 and 64 bit), it opens in a new window. This last is the way the client expects it to work.
Here's my question: With RoboHelp HTML 9, can I control whether help opens in a new window, the same window or a new tab? Or do I need to rely on a developer to configure the web application server so that help opens in a new window as expected?
So far, after a search of user documentation for RoboHelp and my help mapping configuration files, I haven't found a way in RoboHelp or Help Mappings to control whether contextual help opens in a new window or a new tab. I would appreciate any information on whether this attribute can be controlled through a server configuration, or .NET, or some other aspect of the system beyond RH. Or am I overlooking something in RH?
Thanks and regards,
Tom

I'm not sure here but I would say that there is no way you can make that happen from RoboHelp. I believe it will always open in the way you describe, according to the user's browser settings and operating system.
If there is a way to do it, my gut feel is that is something that your developers will have to implement.
As a software user, I think it would irritate me to find new browser instances opening but you have to go with what your client wants.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

Help topics are not displaying when using Windows 8/IE 10

I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
1. Open the Help system from the Help menu within the application.
2. The Allow Blocked Content displays and I allow it.
3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

It seems to be time for the old divide and conquer approach.
Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
Then create another copy of the project so that you have two copies that can be worked on.
Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
It should be the case that one copy is now OK and one still has the problem.
Trash the good copy and then create a second copy of the copy with the problem.
Repeat the process until you have located whatever is causing the problem.
The process takes less time than you might think.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Macbook pro starts up in windows always help change to leopard

I have just reinstalled windows vista i bootcamp as i got the blue screen of death before ( windows rubbish) however i need sometimes , anyway since my reinstall the computer always starts up in Windows where as before it started in Leopard and if i held down Alt then i could choose .
i want default startup in Leopard not windows , so if anyone knows how to change it back that would be great and make leopard mydefault startup operating system ..
thanks mark

In System Preferences there is a Start Up pref pane where you can set default drive.

Problem with SJAS EE 9.1 start and stop (Windows Service Mode)

Hi
Thank you for reading my post
Sun Java application server enterprise edition 9.1 (SJAS EE 9.1+HADB) asks for admin password each time windows try to start it as windows service.
Also HADB asks for password on start.
Is there any way to make it automatic without requiring password?
Thanks

You need to add a password.txt file to your app server path. See the section Security for Automatic Restarts in the administration guide for details.
You may also need to recreate the service to use the passwordfile option. If it is prompting you for a master password also you may need to have your domain and node agents created with the savemasterpassword option. I believe you will have to recreate the node agents, but you can use the asadmin command change-master-password for the domain and specify the --savemasterpassword option.
I have not used the service for the HADB yet, but I believe the procedure is probably similar.

Start Help Topic Window in Dock mode

Similar Messages

Maybe you are looking for