Start HTTP Server
Trying to start HTTP server but receiving error:
[Fri Dec 16 13:23:26 2005] [error] Perl lib version (v5.6.1) doesn't match execu
table version (5.00503) at C:\OracleOWB\perl\5.6.1\lib\MSWin32-x86/Config.pm lin
e 18.
BEGIN failed--compilation aborted at C:\OracleOWB\perl\5.6.1\lib\MSWin32-x86/Dyn
aLoader.pm line 25.
BEGIN failed--compilation aborted at C:\OracleOWB\perl\site\5.6.1\lib/mod_perl.p
m line 4.
BEGIN failed--compilation aborted at C:\OracleOWB\perl\site\5.6.1\lib/Apache.pm
line 4.
Syntax error on line 1307 of c:/oracle/ora92/apache/apache/conf/httpd.conf:
Can't locate object method "boot" via package "mod_perl" at C:\OracleOWB\perl\si
te\5.6.1\lib/Apache/Constants.pm line 8.
BEGIN failed--compilation aborted at C:\OracleOWB\perl\site\5.6.1\lib/Apache/Reg
istry.pm line 4.
Installing OWB 10.1 over 9iR2. Any ideas would be much appreciated.
Please try to change the environment variables point to your Oracle 9iR2 locations to rather than OWB home to resolve this. When there are more than one Oracle homes, such problems arise, and if the parameter values are changed, it could work, most of the times.
The settings show c:\OracleOWB\perl\5.6.1\lib\MSWin32-x86 location for perl libraries, change it to your oracle perl library location
c:\oracle\ora92\Apache\perl\lib\5.00503\... location and try to start, could work
This is a simple version mismatch of your perl libraries.
Siva
Similar Messages
-
Problem in starting HTTP Server (Oracle 9i AS Rel 1 on Solaris 2.8)
Hi All,
I have installed Oracle9i database Rel1 (version 9.0.1) on Sun Solaris2.8) successfully and now, I'm trying to install Oracle 9i Application Server Rel1 (version 1.0.2.2.1) on the same system. I stopped the database before starting installion of AS. My installation is limited to Oracle Forms & Reports Services and Oracle HTTP Server. Installation successfully completed, but, it is failed to start HTTP server. The error I'm getting is:
Syntax error on line 14 of $ORACLE_HOME/Apache/Apache/conf/mod__sse.conf
AuroraService - directive already in effect for this server.
$ORACLE_HOME/Apache/Apache/bin/httpsctl start: httpd could not be started.
Line 14 in mod__sse.conf is:
AuroraService inst1_http
How can I resolve this issue ? Please help.
An early help would be highly appreciated.
Thanks in Advance.
Sajan ThomasHi,
I have resolved that issue by commenting that line. Since I'm not using servlets, I hope that wouldn't create any problems !
Sajan -
start http server powered by apache.I got such message:
'[alert]<5>...:FastCGI:CreateMUtex()failed
Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf:
Failed to create FastCGI application accept mutex'
my isqlplus.conf:
# Copyright (c) 2001, 2002, Oracle Corporation. All rights reserved.
# NAME
# isqlplus.conf
# PURPOSE
# Oracle HTTP Server directives for the iSQL*Plus server
# USAGE
# This file should be included in the Oracle HTTP Server
# "oracle_apache.conf" file.
# Enable handling of all virtual paths beginning with "/iplus/"
# Note: only /iplus/ is mapped, /iplus is not being mapped
<IfModule mod_alias.c>
Alias /iplus/ "C:\oracle\ora92\sqlplus\admin\iplus/"
# Disallow users from trying to access /iplus/ directory listing
<Directory "C:\oracle\ora92\sqlplus\admin\iplus">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Enable handling of all virtual paths beginning with "/isqlplus"
<Location /isqlplus>
SetHandler fastcgi-script
Order deny,allow
# Comment "Allow ..." and uncomment the four lines "AuthType ..."
# to "Require ..." if Oracle HTTP authentication access is required
# for the http://.../isqlplus URL
Allow from all
#AuthType Basic
#AuthName 'iSQL*Plus'
#AuthUserFile C:\oracle\ora92\sqlplus\admin\iplus.pw
#Require valid-user
</Location>
# Enable handling of all virtual paths beginning with "/isqlplusdba".
# Note: Oracle HTTP authentication access must be configured to
# prevent unauthorized users performing DBA operations on
# the database
# Use the HTTP server utility script "htpasswd" to add users to the
# "iplusdba.pw" file.
<Location /isqlplusdba>
SetHandler fastcgi-script
Order deny,allow
AuthType Basic
AuthName 'iSQL*Plus DBA'
AuthUserFile C:\oracle\ora92\sqlplus\admin\iplusdba.pw
Require valid-user
</Location>
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>I appreciate your help.
I have been offline for a long time since I had a business trip two week ago.
I can not start the apache http server, so it isn't on running status within NT services manager.
In fact, there is someting wrong---fail to create FastCGI when startup. Oracle system message tells me that syntax error exists on line 92 of isqlplus.conf but I don't know how to correct it.
Henry -
Solved!!Error when starting HTTP Server
Hi againg
When restarting the HTTP Server I receive the following error
HTTP Server. Using Web Configuration View
JVM: Java Virtual Machine initialized
HTTP Server: Java Virtual Machine Loaded
DSAP Filter SAP Ticketcerifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only initializing
Cannot find NOTES.INI variable MySapDebug, Debug is turned off
Using NOTES.INI variable MySapPsePath = c:\domino\sap\verify.pse
Cannot find NOTES.INI variable mySapView. Using default settings:$Users
Cannot find NOTES.INI variable MySapSuppressEmptyTicketWarning. Default is used (warning messages are written to the log)
DSAP Filter SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only started
HTTP Server: DSAPI SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only Load successfully
Servlet engine initialization was successful
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
HTTP Server Started
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
SAP Ticketverifier: invalid ticket
Opened the NOTES.INI file and started to look for the variables of mySapView, and MySapSuppressEmptyTicketWarning, but they are not presented in this file
Need help to start looking for error
Regards
Kay-Arne
Message was edited by: Kay-Arne AarlieThere are several ways to do this, but for best results on a single installation (versus many), manually add and configure the following SAP TV variables in Notes.ini. Remember to leave a single blank line at the end of the file (a known issue with the last variable not being read):
<b>;===Custom Start===
MYSAPPSEPATH=<your path info goes here>\verify.pse
MySapDebug=<True or False>
MySAPVIEW=<the custom view name, if one is used>
MySapSuppressEmptyTicketWarning=<True or False>
;===Custom End===</b> -
Failed to start HTTP server while installing companion CD
Hi all,
I am installing apex 3.1.2 (though it is old version, clients are still using it :) ), on the oracle 10.2.1 database. I am installing HTTP servers from the companion CD and getting error while starting HTTP server from the configuration assistant. I am getting following error.
==================================
Configuration assistant "Starting HTTP Server" failed
The "/u01/app/oracle/product/10.2.0/OHS/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
===============================
Can someone help me to resolve this issue please. Thanks.
SHYwhat you get if you do
envThis is what I got:
[cder@localhost ~]$ env
SSH_AGENT_PID=2451
HOSTNAME=localhost.localdomain
DESKTOP_STARTUP_ID=
SHELL=/bin/bash
TERM=xterm
ORACLE_OEM_JAVARUNTIME=/opt/jre1.3.1_19
HISTSIZE=1000
GTK_RC_FILES=/etc/gtk/gtkrc:/home/cder/.gtkrc-1.2-gnome2
WINDOWID=46156483
USER=cder
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=abc
GNOME_KEYRING_SOCKET=/tmp/keyring-TXq65G/socket
ORACLE_BASE=/opt/cder
SSH_AUTH_SOCK=/tmp/ssh-jIzDib2410/agent.2410
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-unix/2410
MAIL=/var/spool/mail/cder
DESKTOP_SESSION=default
PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/cder/bin:/opt/cder/920/bin
GDM_XSERVER_LOCATION=local
INPUTRC=/etc/inputrc
PWD=/home/cder
LANG=en_US.UTF-8
GDMSESSION=default
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/home/cder
SHLVL=2
GNOME_DESKTOP_SESSION_ID=Default
LOGNAME=cder
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-tUjeCInKxU,guid=10799645c34fdd03d15a0eb6d3376100
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/opt/cder/920
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/home/cder/.Xauthority
_=/usr/bin/env -
Error starting HTTP-Server: Address in use: JVM_Bind
I installed J2ee version of Oracle9iAS R2 for windows. When I start my application server, I always get the error "Error starting HTTP-Server: Address in use: JVM_Bind". In the previous version, if I met this message, I can change the port number in "http-web-site.xml", but now, no matter what port number I changed, I always get this error message.
Could anybody please help me with this issue?
Can Oracle provides a tool that can automatically free the port?
Thanks, JessieIf you are getting this error while starting the Oracle9iAS by using the NT services or using command line (dcmctl) then there is a port conflict for the HTTP Server. You can go the EM Website and select HTTP Server ->Server properties and select the port# for the HTTP Server.
OC4J is configured to listen for AJP requests only and the ports are dynamically assigned. The port ranges can be specified : OC4J Instance -> Server Properties
regards
Debu Panda
Oracle -
Error starting HTTP Server in Oracle9iAS 9.0.2 Infrastructure
Hi,
I have installed Oracle9iAS Infrastructure 9.0.2 on Windows 2000 Professional. Most of the components are working and I am also able to browse OEM at 1810 port.
The problem is with the HTTP server, it starts and after a while shutsdown automatically. I have tried both the methods to start HTTP Server:-
via windows start menu HTTP Server Startup link
via command: C:\Ora9iAS\dcm\bin\dcmctl start -ct ohs
In both the cases it fails, When using the command dcmctl start -ct ohs. The error code is ADMN-906025.
Can anyone tell me what could the problem be?
BharatWith the command dcmctl geterror 906025 you will see the contents of the error (without a number dcmctl geterror gives the last error). You seem to have a problem with opmn. Check the log files in the $ORACLE_HOME/opmn/logs directory. The log file HTTP Server.1 (as it is called on linux) will probably contain more information as why the HTTP server fails to start.
Regards,
Andre -
Start HTTP Server on Oracle 9.2.0.1 Server version
I have Used Oracle 9.2.0.1 server edition on Windows 2000 server with service pack 4 platform. I want to know how could I start HTTP Server?
When I start HTTP server from Strat > Program > Oracle Ora home 92 > Oracle HTTP Server > start HTTP server powered by Apache then error comes as below..
'Access is denied : FastCGI : create Mutex () failed...What does the error_log of the Oracle Apache HTTP server say? This is typically in the $ORACLE_HOME/Apache/Apache/logs directory.
Weird that a mutex create failed. Without the actual o/s error code that resulted, it is difficult to diagnose the problem. Anything in the Application (or Security) Event Log? Access denied seems to indicate an ACL failure of sorts.
You could also disable FastCGI - it is not very often used and APEX (mod_plsql) does not need it. The httpd.conf file (in $ORACLE_HOME/Apache/Apache/conf) can be edited to disable FastCGI. -
Hi all
Oracle people please help
I can't run my forms in DevSuite 9i-got error FRM1042-Http listen is not running on <machine>:8890 port.
I tried to start HTTP server from services(Control panel)-i noticed that HTTP sevrer properties i set to be manual.Starting HTTP server gives error 1067: The proces is terminated unexpectedly.
Before starting forms i got OC4J started.
http://<IP address>- gives nothing. HTTP server is running on port 80(default).How to change port for OC4J?
Does anybody knows how to get around? PLeeease..
Thanks allHi all
I guess i helped myself.I was started my forms with IPaddres instead of machine name on port 8890
I ping my machine and the IPaddress was changed.
I forms Preferences i inert new Ipaddress and form i srunning.
Can somene explain me why my IP address has been changed and why HTTP server status is still stoped.If i start browser with http://ipaddress:8890 i can see the servers main page and it is started and running -
Can't start http server ASControl service
Hi, I installed http server from companion cd for oracle 10.2.0.3 but when configuration assistants was setting http server give the message failed.
Now i can´t start http server service.
INFO: El asistente de configuración "OC4J Configuration Assistant" se ha ejecutado correctamente
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Created a new file C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.1
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.2
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.3
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.4
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.5
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.6
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: --------------------------------------
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolAllCommands" contiene todos los comandos que van a ejecutar los asistentes de configuración. Este archivo se puede utilizar para ejecutar los asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.7
GRAVE: OUI-25029: Uno o más asistentes de configuración "recomendados" no han terminado correctamente. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
INFO: Usuario seleccionado: Sí/Aceptar
INFO:
*** Fin de Instalación Página***
La instalación de Oracle Database 10g Companion Products ha sido correcta, pero han fallado, se han cancelado o se han saltado algunos asistentes de configuración opcionales.
ADVERTENCIA: ¿Seguro que desea salir?
INFO: Usuario seleccionado: Sí/Aceptaruser13078324 wrote:
How ?in cmd run this
netstat -an
and search for a line like
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
The important is TCP, 80 and keyword LISTENING
Other may differ -
Hi,
We have JES6 installed running for more than year now.
Now we get following error, when starting cal server.
Starting http server ............................................................... timeout
debug log is as follows,
[06/Jul/2008:12:33:49 +051800] netra cshttpd[25963]: General Debug: Processor 0 is online
[06/Jul/2008:12:33:49 +051800] netra cshttpd[25963]: General Debug: Processor 1 is online
[06/Jul/2008:12:33:49 +051800] netra cshttpd[25963]: General Notice: cshttpdparse_commandline: successfully bind process 25963 to processor 0
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: cshttpd opening connection with watcher on port 49995
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Notice: cshttpd attempting to open Calendar Database
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: Events
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: Todos
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: CalProps
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: Alarms
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: Journal
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: GSE
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: Recurrence
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb: Opening database: DeleteLog
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: caldb_pvt_OpenDBInstance: NOT Initializing - no call to cld_init().
[06/Jul/2008:12:33:50 +051800] netra cshttpd[25963]: General Debug: session_db_init: attempting to open session database for cshttpd
Messaging servers too running on the same host, tried only removing __db* files in /jes/var/opt/SUNWics5/csdb/dbstorelock and /jes/var/opt/SUNWics5/csdb/ - No luck.
Any suggestions for a solution
Thanks for the time,maytlsserver wrote:
the seesion dir was at /jes/opt/SUNWics5/cal/data/data/http/sessionYou will probably find that /jes/opt/SUNWics5/cal/data is a symlink to /jes/var/opt/SUNWics5/cal
I have removed __db from here, It works fine :-)
Any idea y this happens.. my setup was running for more than year now and at once it gives this.. I don't have any definite answer as to what would cause this -- it may be a database lock was left if the cshttpd process wasn't cleanly shut-down. Ideally Calendar Server should recover/check from this situation...
Regards,
Shane. -
Error starting HTTP-Server: Cannot assign requested address: JVM_Bind
Hi.
Anyone know how to configure the Oracle HTTP server within Jdeveloper9i to work?
When I try run a JSP page, I get the following error:
C:\Oracle9iDS\jdk\bin\javaw.exe -ojvm -classpath C:\Oracle9iDS\j2ee\home\oc4j.jar com.evermind.server.OC4JServer -config C:\Oracle9iDS\jdev\system\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8888, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Error starting HTTP-Server: Cannot assign requested address: JVM_Bind
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
Please contact me at [email protected]
cheers paulA JVM_Bind error means that the port is already in use. This is an unusual error message to get because JDev scans the ports ahead of time to make sure they are free before launching the server.
Check if you have any processes running that might be holding port 8888. There might be a previous instance of the OC4J server running that hasn't released port 8888 yet. On Windows, at a command prompt, you can use "netstat -a" to see local ports that are in use. -
Error starting HTTP-Server: Address already in use: JVM_Bind
Hello,
I installed IAS 10.1.2.0.2. then I tried to start an application and get the following:
D:\Oracle_Home_IAS\j2ee\home>java -jar oc4j.jar
07/01/08 10:04:00 Error starting HTTP-Server: Address already in use: JVM_Bind
07/01/08 10:04:01 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initialized
07/01/08 10:04:01 !!! No valid java compiler found !!!
07/01/08 10:04:01 javac.exe not found under D:\MDK\jre\1.4.2, please use a valid
jdk or specify the location of your java compiler in server.xml using the <java
-compiler .../> tagIf I had to guess, you are starting HTTP Server on the same port as some other service.
BTW, Oracle Express is not a supported platform for Mobile Server. -
Error 1067: When Starting HTTP Server
Hi all
I am getting "Error 1067: The Process Terminated Unexpectedly" when I try to start HTTP Server service.
Any ideas?
nullbelow are the entries from oracle_apache.conf
Which one would u like me to delete in order to start my apache.exe.
include "E:\oracle\ora90\sqlplus\admin\isqlplus.conf"
include "E:\oracle\ora90\xdk\admin\xml.conf"
include "E:\oracle\ora90\Apache\modose\conf\ose.conf"
include "E:\oracle\ora90\Apache\modplsql\cfg\plsql.conf"
include "E:\oracle\ora90\Apache\jsp\conf\ojsp.conf"
# Advanced Queuing - AQ XML
include "E:\oracle\ora90\rdbms\demo\aqxml.conf"
# Oracle BC4J
include E:\oracle\ora90\BC4J\bc4j.conf
include "E:\oracle\ora90/oem_webstage/oem.conf"
# Advanced Queuing - AQ XML
include "E:\oracle\ora90\rdbms\demo\aqxml.conf"
# -
OPMN Configuration Assistant - start HTTP Server failed
Help!! This is the 7th time I saw this message.
My situation is:
1. Installing Oracle 10g on infrastructure option
2. My OS is Windows XP pro
3. I installed apache triad and apache HTTP server previously, but before installation I have removed.
4. I have followed the manual deinstallation in oracle 10g release doc before reinstallation.
Trying:
1.When I executed command in dos
opmnctl verbose startproc ias-component=HTTP_Serverand it show the following message
<?xml version='1.0' encoding='US-ASCII'?>
<response>
<opmn id="danaPC:6200" http-status="204" http-response="0 of 1 processes started
.">
<ias-instance id="infra.danapc">
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="1269235724" pid="2636" status="Init" index="1" log="C:\Or
acle\infra\opmn\logs\HTTP_Server~1" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the ma
ximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
2. The log file in opmn\logs\HTTP_SERVER~1 show
[warn] pid file c:/oracle/infra/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
ap_spawn_child: Bad file descriptor
Couldn't fork child for piped log process
Hope we can come over thsi difficulty and give others the best solutions. ThanksIt was detailed on Metalink:
Subject: Oracle9iAS 9.0.2.x HTTP Server Fails To Start When RotateLogs Is Used On Windows 2000
Doc ID: Note:225592.1 Type: PROBLEM
Last Revision Date: 05-MAR-2004 Status: PUBLISHED
Oracle9iAS 9.0.2.x HTTP Server Fails To Start When RotateLogs Is Used On Windows 2000
* fact: Oracle HTTP Server Powered by Apache
* fact: Oracle 9i Application Server Enterprise Edition 9.0.2
* fact: MS Windows 2000
* symptom: Trying to use Rotate Log
* symptom: ORACLE_HOME/Apache/Apache/conf/httpd.conf contains the following:
* symptom: TransferLog "|rotatelogs $ ORACLE_HOME/Apache/Apache/logs/access_log 86400"
* symptom: EM website fails to start HTTP Server with errors:
* symptom: Oracle.sysman.emSDK.util.jdk.EMException: Timeout has been reached
* symptom: Oracle.sysman.emSDK.util.jdk.EMException: The opmn request has failed.
* symptom: From opmn: HTTP/1.1 400 Bad request Content-Length: 0 Content-Type: text/html Response: No processes matched the request.
* symptom: Check opmn log files such as ipm.log and ons.log for detailed.
* symptom: Starting HTTP Server from dcmctl gives error:
* symptom: ADMN-906025 The exception 806212 occurred
* symptom: Error in HTTP Server.1 log file:
* symptom: [error] (9)Bad file descriptor: dup2(stdin) failed ap_spawn_child: Bad file descriptor Couldn't fork child for piped log process
* cause: Bug 2438924 ONE OF APACHE PROCESSES WHICH USES ROTATELOGS.EXE CANNOT BE STARTED
fix:
1. Take a backup of $ORACLE_HOME\opmn\conf\opmn.xml
2. Edit Insert $ORACLE_HOME\opmn\conf\opmn.xml
3. Change line:
<ohs gid="HTTP Server"/>
to:
<ohs gid="HTTP Server">
<environment>
<prop name="ComSpec" value="C:\WINNT\system32\cmd.exe"/>
</environment>
</ohs>
4. Shutdown iAS completely and then restart iAS and HTTP Server starts. -
10g Forms - error starting http server
When I am trying to start OC4J, it is giving an error,
Error starting HTTP server: address already in use: JVM Bind
When I run the form, the browser just keeps waiting for the server.
What do I need to change ?
Thanks.I just resolved this.
I moved the line I added to httpd.conf to be the last line in the file, after all the other includes.
include "/u01/app/oracle/product/10202com/Apache/modplsql/conf/marvel.conf"
Maybe you are looking for
-
Why can't I be able to search for a location in the HTC app?
So, it shows weather for my current locations just fine, but when I search for a specific location it won't find it! The only time it shows weather is when its your current location. And it finds a few areas, such as Anchorage, Alaska. But I would li
-
HT2534 "none" does not appear as a credit card option?
I follow the instructions on setting up an iTunes account without a credit card (so I can download album art) but the "none" does not appear as a card option after following the instruction to first download a free app.
-
I don't know what to do... I lost my YouTube and my App Store is weird and I want my old App Store and YouTube back.
-
Financial Statement Version - Value Help Function Module
Hi, I want a function module or a bapi which retrieves all the Financial Statement Versions defined in the system, just like bapi_companycode_getlist which list down all the company code. Thanks, James.
-
I've learned most of what I know about PSE from a certain magazine from England. But in their step by step instructions, you are told to use this or that blending mode, but not why. Are there any threads on here that expalin what the different modes