Start lightdm after DKMS modules have been (re)built

Hello!
Has anyone an idea how to "force" the lightdm manager to start after the DKMS modules compilation?
Now, on each kernel update, the lightdm manager tries to start and fails, because the the DKMS modules have not been built. Although it is not a real problem, it is kind of annoying.
Thank you!
Athanasios

Never used DKMS myself, but after a quick look at the wiki, it seems you're using a systemd service to automatically rebuild modules during the first boot after a kernel upgrade.
Can't you simply add After=dkms.service to lightdm (or Before=lightdm.service to dkms)?
(See https://wiki.archlinux.org/index.php/Sy … nit_files)

Similar Messages

  • Switching Dynamic Channels after HSDIO settings have been committed

    Hello.  I'm trying to find a way to switch between two dynamic channels in a waveform after the HSDIO waveform is initated. 
    Would someone point me to an example or reference where I could learn how this is done?
    For example: 
    I have a PXI-6561 in a 1062Q chasssis.  I am assigning channels 0-3 as dynamic and using HSDIO write to populate the 4 channels from a waveform.  
    I need channels 0 and 1 to be un-disrupted and repeating (all channels are the same lenght).  Channel 2 is data sent to an IC and channel 3 is used for queing updated data.   I'd like to HSDIO write to channel 3 and then, when the write process has completed, I would like to swap channels 3 and 2 before the waveform begins another cycle.  
    I have tried this by re-calling the Assign Dynamic Channels node.  This did not work because Assign Dynamic Channels does not work after the waveform has been initiated.  
    A very similar question was addressed on this forum at the below link.  This did not work for me because the waveform is already commited when I want to make the switch. 
    http://forums.ni.com/t5/Digital-I-O/HSDIO-Dynamic-​Generation-of-Digital-Signals-on-Separate-Non/td-p​...
    Also, I'm open to suggestions about a better way to accomplish this.
    Thank You,
    Sean

    Hi Sean,
    I have been looking in to your question and I have not been able to find a way to do this without a brief stop to reload the waveform. 
    The way data is encoded for HSDIO makes switching channels after the data has been committed  not possible unfortunately. You could try to use scripting and trigger the waveform to swap the location of the data, but this would have to be done in Windows and the waveform must be reloaded into onboard memory. The script would be small so reloading that is not a huge time sink. The worst of it is having to reload the entire waveform, but this cannot be worked around.
    Recommendations to improve performance would be to have a large onboard memory and load as much as you can into it initially to prevent reloading several times. If the first pattern takes 1Mbit of data per channel on one channel, you can load around 60 patterns with the data on different channels, for instance. Then you can create the script to address each pattern by its waveform name.
    It is unfortunately the way we have to work with the board at this time. However, this actually would be a great application for an FPGA on one of our FlexRIO modules. You could use this in order to do this task specifically. 
    Please let me know if you have any questions!
    Stephanie S.
    Application Engineer
    National Instruments

  • Connection lost after 2 songs have been played.

    Everytime I play songs from my macbook to ATV2 it plays only 2 - 3 songs then it hangs. I just got 4 songs out of it. I have to disconnect my home share and re connect to start it again. Any ideas why this would be happening. I've browsed the forum to see that other people have this issue, but there is no answer as to what is causing it. Surely its not the router as I have a new router. ATV2 streams movies without any interruption so I dont get why it happens to songs through itunes.

    netsurferdude2 wrote:
    Hi all,
    Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
    My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
    I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
    I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
    I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
    Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
    The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
    Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
    Thanks in advance
    Greg
    Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
    Hi
    Try disabling the firewalls and access server side.
    see if any change?
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Message after 1000 objects have been loaded in RON

    Hello,
    After opening a branch of objects, business functions for example, RON (Repository Object Navigator) keeps asking "1000 Business Functions have been loaded - Continue?". Is it possible to get rid of this message?
    Regards,
    Maris

    I'm not sure if you can, through the ROB, get rid of the message. It seems to be associated to the browser, perhaps caching, functionality. In IE I get similar messages if trying to view something that has over 500 objects, whereas in Firefox it just displays them.

  • HT4623 How do I get back to Setup Assistant after the settings have been entered?  I need to get back to Setup Assistant to back up the data that was on my iphone 4S to my new 5S

    I purchased a new iphone 5s yesterday from Verizon.  They had a problem setting it up.  They went through Setup Assistant setting up the phone.  They could not get my back up I had on iCloud, so they just skipped it.  Now I do now have all my apps or other data.
    I have been doing some reading and it said to go back to Setup Assistant.  I can't firgure out how to do that.
    Can anyone help me?

    Are you wanting to restore from your backup?  IF so, go to settings - general - reset - erase all contents or settings this will wipe yoru phone clean, then you'll get the option to restore from backup.

  • Decommission Exchange 2010 after all mailboxes have been moved to Exchange Online

    Currently very confused on what to do.
    I'm looking to migrate mailboxes to Exchange online using a Hybrid deployment with Dirsync. The users have multiple email and domain addresses. They are moving away from their SBS 2011 and Exch 2010 server. They have an AD and File and Print server. Once
    all mailboxes are moved and mx records are changed and everything is running smootkly. I would like to then decommission SBS and Exch 2010 box and still use DIRsync
    Few questions
    Once I remove Exch 2010 what wont I be able to do. Cant find anything specific online
    Will I still be able to create a user in AD then login to Exchange online and assign a license then
    the user would have mailbox
    Edit a user and add smtp email address.
    As I don’t have many users should I rather use PST migration or will I run into the same problems.

    Yes, you should move the arbitration mailboxes - they are organizational mailboxes, not mailbox database mailboxes.
    Make sure all Exchange resources and operations hosted on this server have been moved to your Exchange 2013 system before you remove Exchange from this server.  If you try to remove Exchange (in either the GUI or the command line) and something is
    still using this server, you will be alerted that something is still using the server and will be told what it is.
    HTH ...

  • Having problem starting my cluster after my servers have been relocated

    crsctl check crs hands indefinitely. CRS is healthy on only 1 node, #1 in the cluster. Please help.
    Edited by: 895124 on Nov 4, 2011 8:22 AM

    Check if Clusterware can see all the nodes..
    #$CRS_HOME/bin>olsnodes
    If you can see all the nodes, do the following:
    #$CRS_HOME/bin>./crsctl disable crs
    #$CRS_HOME/bin>reboot
    After systems comes back up......run:
    #$CRS_HOME/bin>./crsctl start crs
    #tail /var/log/messages
    paste the output here......to see what exactly is going on........ BTW crsctl disable crs only stop crs stack to auto-start in next reboot. You can always say 'crsctl enable crs' to put it back.
    HTH,

  • Show link/button after all pages have been visited

    I want to make a course that branches out, so you can pick in which order you can learn about the different subjects, and at the end of each you will get the option to go back to "main screen"(this is also where you pick which subject to learn about). There are 4 subjects that have 1 slide with 6 slides under there again.
    What I want is to have a link/button on the "main screen" that allows you to go to the closing slide (just a plain thank you for your time etc), but I only want it to be visible after you've visited all the learning pages (4+(4*6)=28).
    I looked at advanced actions and conditional actions, but I didn't really find anything. Anyone have any ideas or work around? Thanks!

    This kind of thing has been explained many times on this forum.  In fact it's come up so many times over the past few years I'm quite surprised your searches didn't find anything about similar interactions.
    If your continued searches yield nothing, and you want a very detailed step by step tutorial on how to achieve such an interaction, I would suggest this e-book:
    http://www.infosemantics.com.au/adobe-captivate-advanced-actions
    It has a number of practice exercises with example CPTX files showing how this is achieved.

  • FF keeps freezing. this started 3 months ago (there have been 2 updates since the update when it started) tried all solutions in forum

    FF now freezes almost every time I click a button on any website -- it worked fine until about 3 months ago. This usually resolves itself without any warnings, but sometimes get unresponsive script or plug-in (flash) warning. But it's usually quicker just to re-start FF, which usually helps. Almost every morning I get on the computer, I have an unresponsive script warning (this is usually chrome://global/content/bonding/browser). I've read forum articles, shut off hardware accelerator, use ad, script, flash blockers. However, some of my add-ons won't load -- the ones that need FF to be re-loaded. I've done this repeatedly and ad blocker, etc. won't load -- they worked before I reset FF, which I tried because nothing else was solving my freezing problem. I followed a thread to get add-ons to load and I deleted files in my profile but this didn't solve that problem (though No SCript loaded when I restarted my COMPUTER -- the others did not). Lastly, that thread was closed because the asker's problem was solved, while mine, the SAME problem, was not. This is my troubleshooting information:
    Application Basics
    Name: Firefox Version: 30.0 User Agent: Mozilla/5.0 (Windows NT 5.1; rv:30.0) Gecko/20100101 Firefox/30.0
    Crash Reports for the Last 3 Days
    All Crash Reports (including 5 pending crashes in the given time range)
    Extensions
    Name: Clean Links Version: 2.6.0 Enabled: true ID: {158d7cb3-7039-4a75-8e0b-3bd0a464edd2}
    Name: Erase Facebook ads and suggestions Version: 1.1.1.0 Enabled: true ID: jid1-UfSghNz6VhKecw@jetpack
    Name: NO Google Analytics Version: 0.6 Enabled: true ID: jid1-JcGokIiQyjoBAQ@jetpack
    Name: Video Blocker Version: 1.0.0 Enabled: true ID: jid1-3OQ5HY7YsLBV7Q@jetpack
    Name: Adblock Plus Pop-up Addon Version: 0.9.2 Enabled: false ID: [email protected]
    Name: Disconnect Version: 3.14.0 Enabled: false ID: [email protected]
    Name: Flash Control Version: 1.0.5 Enabled: false ID: jid1-sNL73VCI4UB0Fw@jetpack
    Name: Microsoft .NET Framework Assistant Version: 0.0.0 Enabled: false ID: {20a82645-c095-46ed-80e3-08825760534b}
    Name: NoScript Version: 2.6.8.28 Enabled: false ID: {73a6fe31-595d-460b-a920-fcc0f8843232}
    Name: Skype Click to Call Version: 6.11.0.13348 Enabled: false ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Name: Updated Ad Blocker for Firefox 11+ Version: 0.7.7 Enabled: false ID: {4DC70064-89E2-4a55-8FC6-E8CDEAE3618C}
    Important Modified Preferences
    accessibility.blockautorefresh: true accessibility.typeaheadfind: true browser.cache.disk.capacity: 358400 browser.cache.disk.smart_size_cached_value: 358400 browser.cache.disk.smart_size.first_run: false browser.cache.disk.smart_size.use_old_max: false browser.link.open_newwindow: 2 browser.places.smartBookmarksVersion: 7 browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243 browser.startup.homepage: http://www.wikipedia.org/ browser.startup.homepage_override.buildID: 20140605174243 browser.startup.homepage_override.mstone: 30.0 browser.tabs.loadInBackground: false dom.mozApps.used: true extensions.lastAppVersion: 30.0 gfx.blacklist.direct2d: 3 gfx.blacklist.layers.direct3d10: 3 gfx.blacklist.layers.direct3d10-1: 3 gfx.blacklist.layers.direct3d9: 3 gfx.blacklist.layers.opengl: 3 gfx.blacklist.stagefright: 3 gfx.blacklist.suggested-driver-version: 6.1400.1000.5218 gfx.blacklist.webgl.angle: 3 gfx.blacklist.webgl.msaa: 3 gfx.blacklist.webgl.opengl: 3 gfx.direct2d.disabled: true layers.acceleration.disabled: true network.cookie.prefsMigrated: true places.database.lastMaintenance: 1403210052 places.history.expiration.transient_current_max_pages: 26584 plugin.disable_full_page_plugin_for_types: application/pdf plugin.importedState: true privacy.donottrackheader.enabled: true privacy.sanitize.migrateFx3Prefs: true storage.vacuum.last.index: 0 storage.vacuum.last.places.sqlite: 1403118175
    Graphics
    Adapter Description: Intel(R) 82915G/GV/910GL Express Chipset Family Adapter Drivers: ialmrnt5 Adapter RAM: Unknown Device ID: 0x2582 Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer. DirectWrite Enabled: false (0.0.0.0) Driver Date: 1-23-2005 Driver Version: 6.14.10.4020 GPU #2 Active: false GPU Accelerated Windows: 0/13 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer. Vendor ID: 0x8086 WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer. windowLayerManagerRemote: false AzureCanvasBackend: skia AzureContentBackend: cairo AzureFallbackCanvasBackend: cairo AzureSkiaAccelerated: 0
    JavaScript
    Incremental GC: true
    Accessibility
    Activated: false Prevent Accessibility: 0
    Library Versions
    NSPR Expected minimum version: 4.10.6 Version in use: 4.10.6
    NSS Expected minimum version: 3.16 Basic ECC Version in use: 3.16 Basic ECC
    NSSSMIME Expected minimum version: 3.16 Basic ECC Version in use: 3.16 Basic ECC
    NSSSSL Expected minimum version: 3.16 Basic ECC Version in use: 3.16 Basic ECC
    NSSUTIL Expected minimum version: 3.16 Version in use: 3.16

    I turned off the accelrator months ago. That was the first thing I did. It helped some. The problem is getting progressively worse, so it seems like every upgrade in the past 3-4 months is causing the problem.

  • How can I access data on an external drive in my mac after all folders have been turned into .lnk files? I am desperate!

    I don't know what happened, I connected my external hd today and all files had been turned into that!

    I know I am going to sound really stupid when I ask this, but how do I do that? There was this folder called Recycle Bin, which I have deleted already but the files are still in the same format. I know they are in the HD 'cause of the space taken up in it, but I would like to know exactly what to do to clear the malware altogether and have access to the stuff I have again.
    Thank you very much in advance and sorry for being such a dummy

  • HT201320 After e mails have been delivered, wench another comes in, the existing E mails self delete, any ideas please?

    Sorry, title should read " After e mails arrive, when subsequent e mails arrive, the existing e mails self delete, any ideas please".

    It could be a server setting for mailbox handling. Have you checked what options you have set for for synched mail to another machine.  Log into your email from say your PC and check the settings from there.
    Regards, Ct

  • TestStand Server remains busy after 2 steps have been edited

    Hi,
    anyone aware of a problem I am faced with (Newbie in TS): The sequence editor does report 'Server busy' forever, when I edited a sequence step and try to edit another one. Any solutions/workarounds other than killing TS and restart it? NI (Germany?) did not react within two days.

    Hi Bob,
    after having driven crazy with this I issued a service call to NI Germany. They offered me a hint to de- and re-install TS completely. This took me a long time, but now the system is up running. What about putting the hint you gave into the KB. It would have saved me a lot of trouble, because there's where search first. Allthough NI support is very good compared with others, a quick search in the KB is much much faster.
    Greetings from Germany!
    -- Uwe Frenz

  • Emergency: cannot start database because redo logs have been deleted

    Hi. Ok, so the redo logs are deleted and I don't have a backup. Fine, whatever. I am trying to just start my database and start the logging from scratch.
    ORA-00320: cannot read file header from log 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u01/oradata/orcl/redo01.log'
    ORA-27069: attempt to do I/O beyond the range of the file
    Here's what my log files look like:
    select group#, thread#, status from v$log;
    GROUP# THREAD# STATUS
    1 1 ACTIVE
    4 1 UNUSED
    3 1 UNUSED
    2 1 CURRENT
    I have group 3 and 4 just sitting there. I would love to switch logging from group 1 to group 4 (which I just created) so I can drop the corrupted group 1 but when I try:
    SQL> alter system switch logfile;
    alter system switch logfile
    ERROR at line 1:
    ORA-01109: database not open
    Of course the database is not open because I can't get it started. So, I'm in kind of a catch 22.

    I think you need to restore your database. http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/osadvsce.htm#CACFFJFB says:
    >
    Losing an Active Online Redo Log Group
    If the database is still running and the lost active redo log is not the current log, then issue the ALTER SYSTEM CHECKPOINT statement. If the operation is successful, then the active redo log becomes inactive, and you can follow the procedure in "Losing an Inactive Online Redo Log Group". If the operation is unsuccessful, or if your database has halted, then perform one of procedures in this section, depending on the archiving mode.
    The current log is the one LGWR is currently writing to. If a LGWR I/O operation fails, then LGWR terminates and the instance fails. In this case, you must restore a backup, perform incomplete recovery, and open the database with the RESETLOGS option.

  • TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail.  Please help

    I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"  I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy.  There are 5 Ipod devices in the house and we deperatly need to get this fixed.
    Any help would be greatly appreciated
    Robert

    Refer to following articles to remove SC file(s):
    Win 7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your Quicktime:
    Control Panel >
    Win7/Vista - Programs n Features.
    WinXP - Add n Remove Programs
    Hightlight QUICKTIME and click CHANGE then REPAIR.

  • HP Officejet Pro 8500 A909g series wireless is only printing pink after all inks have been replaced

    I have changed all ink cartridges twice and it is only printing print and not entire page.  I have cleaned printhead, replaced all cartridges twice, aligned.   Shows on screen that all ink cartridges are full except on upper corner it is showing ink 1/4 full.

    Hi @vspivey,
    I understand your printed output is pink instead of black despite your efforts so far. I would be happy to help you from here.
    Although you have already cleaned the printheads, and changed cartridges, the following document might be helpful; Fixing Print Quality Problems for the HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g....
    If the issue persists, you might consider calling us. We can check the price and availability of replacement printheads, and/or discuss the option of a newer printer model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Best of luck!
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for