Start listner by install oracle 10g faild

hi
by install oracle 10g can not start the lisner
error :
LSNRCTL> start
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="my host name.domain.com")(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
LSNRCTL>

user12065379 wrote:
do have idea what can be wrong , ineed solution quicklyIf you need a solution quickly, you should open a sev-1 ticket with oracle support. This forum is NOT oracle support, it is only a platform supplied by oracle for peer user support.
Did you read and heed the installation guide? Especially the part about networking considerations at http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABIAEEC

Similar Messages

Can't install oracle 10g on solaris v10 X86!!!

Hi everybody, I got error messages below:
====================================================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
=====================================================
Does that mean there is not Oracle 10g for Solairs 10 X86?
Where can I find Oracle 9i for Solairs x86?
Thanks advance!

10g on Solaris 10 needs special handling:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

When i installed oracle 10g am not able to start my application

Hi all,
Am using ATG 9.1 my application is running fine,but after i installed oracle 10g my Jboss is starting up but i could not run my application?
It is saying that Requested Url cannot be found.......
Could you please tell me why this happens..........
Thanks in advance......
Thanks&Regards,
Sudhakar.

This happens in oracle 10g because oracle 10g also uses 8080 as the default http port.
And if your application server is also running on default 8080 port u ll see this issue.
For resolving this, all you need to do is change the default 8080 port of oracle to some other port number.
See the following link to change the port.
http://daust.blogspot.in/2006/01/xe-changing-default-http-port.html
After changing the port, restart your machine once and you should be able to access your application fine.
~Gurvinder
Edited by: Gurvinder on Nov 6, 2012 1:08 AM

Port Allocation error installing oracle 10g enterprise manager on OEL 4.0

Dear All...
This is urgent requirement...plz any one help me .......i have install oracle 10g on OEL 4.0. after some time i need to install a EM but i am starting to install em it rais error
run this command:
emca -config dbcontrol db
after press inter ask SID port sys password and dbsnmp password and sysman password..after inputting all these parameter..it is start installation..but in some seconds it gives
error
"SERVER: failed to allocate port(s) in the specified range for the following process JMS [5540-5559], RMI [5520-5539], Database control [5500-5519], EM Agent [3938] [1830-1849]"
faild to installation...
Plz any one help me..as soon as possible.......
Thnx
Ali
India
DBA

Dear All...
This is urgent requirement...plz any one help me .......i have install oracle 10g on OEL 4.0. after some time i need to install a EM but i am starting to install em it rais error
run this command:
emca -config dbcontrol db
after press inter ask SID port sys password and dbsnmp password and sysman password..after inputting all these parameter..it is start installation..but in some seconds it gives
error
"SERVER: failed to allocate port(s) in the specified range for the following process JMS [5540-5559], RMI [5520-5539], Database control [5500-5519], EM Agent [3938] [1830-1849]"
faild to installation...
Plz any one help me..as soon as possible.......
Thnx
Ali
India
DBA

Error in Installing Oracle 10g Express Edition Universal on WIndows2003

While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.

Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error while installing Oracle 10g on CentOS 5.5

Hello,
I have been using the following url to install oracle 10g R2:
http://onaxer.com/blog/blog/tag/oracle-10g-r2-installtion-on-centos-5-5rhel/
I have copied the oracle 10g R2 linux version from windows to linux using FTP.
All the installer requirements have been met, but i'm getting the following error while running the installation:
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-21_03-11-44PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-02-21_03-11-44PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Any help would be greatly appreciated.
Thanks.

Hi,
Download & Install the following rpm and retry oracle installation.
http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
installation
rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6.
As root, issue the commands:
mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Pubudu

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

Display Problem while installing Oracle 10g on RHEL 5

All,
I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
e@dhcppc6 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@dhcppc6 database]$

export DISPLAY=<hostname>:0
Are you running from the same terminal or connecting remotely?
If connecting remotely, you need a Xserver running on the client machine.

Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          13      104391   83 Linux
/dev/sda2              14        2053    16386300   8e Linux LVM
/dev/sda3            2054        2372     2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdd1               1       10016    10256368   83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1       10048    10289136   83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdc1               1       10048    10289136   83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdf1               1       10080    10321904   83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sde1               1       10016    10256368   83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!

did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done

ACL Error when install Oracle 10G on Windows XP

I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
David

Hi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi

Install oracle 10g on solaris 9 platform without setting noexec_user_stack

Hi,
I'd like install oracle 10g software on solaris 2.9 platform without setting noexec_user_stack parameter to 1.
The problem is that i need install software before, for migrating product environment.
I can write /etc/system file but i can't reboot system until several days.
I will not start migration process until i reboot the system and parameter definitely set.
Do you know if we will can have any kind of problem???
Thanks in advance.

Thanks for your answer FZheng. But i will just install software. I will not start any oracle 10g process until i reboot the machine.
I think that oracle software installacion should not be affected. Do you know if this parameter affect to compile softwere during OUI wizard progress???.
Before going on migration process and start database i will sure that this parameter is correctly fixed.
PD.: I couldn't read metalink reference that you've suggested becouse my metalink account have problem access in this momment. During all day i've been reeding metalinks docs without any problem until this momment, bad luck.
In test environment i've installed oracle without this parameter and i've never had any problem. But this installation is more important than others becouse i ask you in this specialist forum.
Thanks again !!!

Start listner by install oracle 10g faild

Similar Messages

Maybe you are looking for